LiMg0.5Mn1.5O4的合成及对Li+的离子交换选择性

锂及其化合物在航空航天、化工、医药、空调、高能电池和热核反应等方面都有广泛应用，对锂及其化合物的需求与日俱增。我国液体锂资源非常丰富，开发利用其中的锂资源具有重要意义。从盐湖水、地下卤水、盐田母液、油气田水等咸水资源中提取锂的方法有碳酸盐沉淀法、离子交换法、萃取法等。离子     

Electrochemical properties and synthesis of LiAl0.05Mn1.95O3.95F0.05 by a solution-based gel method for lithium secondary battery

The cathode materials, LiMn₂O₄, LiAl_0.05Mn_1.95O₄ and LiAl_0.05Mn_1.95O_3.95F_0.05 were firstly prepared by a simple solution-based gel method using the mixture of acetate and ethanol as the chelating agent. The synthesized samples were investigated by X-ray diffraction, scanning electronic microscope and differential and thermal analysis. The as-prepared powders were used as positive materials for lithium-ion battery, whose discharge capacity and cycle voltammogram properties were examined. The results revealed that LiAl_0.05Mn_1.95O_3.95F_0.05 synthesized by the solution-based gel method had higher initial capacity than LiAl_0.05Mn_1.95O₄ and better capacity retention rate (92%) than that of LiAl_0.05Mn_1.95O₄ and LiMn₂O₄, which revealed that Al and F dual-doped LiMn₂O₄ could gain better electrochemical properties of LiMn₂O₄ than only the Al-doped LiMn₂O₄.     

Thermal stability of the manganese-nickel mixed ferrite and iron phases in the Mn0.5Ni0.5Fe2O4/Fe composite/nanocomposite powder

The composite/nanocomposite powders of Mn_0.5Ni_0.5Fe₂O₄/Fe type were synthesized starting from nanocrystalline Mn_0.5Ni_0.5Fe₂O₄ (D = 7 nm) (obtained by ceramic method and mechanical milling) and commercial Fe powders. The composites, Mn_0.5Ni_0.5Fe₂O₄/Fe, were milled for up to 120 min and subjected to heat treatment at 600 °C and 800 °C for 2 h. The manganese-nickel ferrite/iron composite samples were subjected to differential scanning calorimetry (DSC) up to 900 °C for thermal stability investigations. The composite component phases evolution during mechanical milling and heat treatments were investigated by X-ray diffraction technique. The present phases in Mn_0.5Ni_0.5Fe₂O₄/Fe composite are stable up to 400–450 °C. In the temperature range of 450-600 °C, the interdiffusion phenomena occurs leading to the formation of Fe_1?xMn_xFe₂O₄/Ni–Fe composite type. The new formed ferrite of Fe_1?xMn_xFe₂O₄ type presents an increased lattice parameter as a result of the substitution of nickel cations into the spinel structure by iron ones. Further increases of the temperature lead to the ferrite phase partial reduction and the formation of wustite-FeO type phase. The spinel structure presents incipient recrystallization phenomena after both heat treatments (600 °C and 800 °C). The mean crystallites size of the ferrite after heat treatment at 800 °C is about 75 nm. After DSC treatment at 900 °C, the composite material consists in Fe_1?xMn_xFe₂O₄, Ni structure, FeO, and (NiO)_0.25(MnO)_0.75 phases.     

Comprehensive reinvestigation on the initial coulombic efficiency and capacity fading mechanism of LiNi0.5Mn1.5O4 at low rate and elevated temperature

The effect of different membranes and aluminum current collectors on the initial coulombic efficiency of LiNi_0.5Mn_1.5O₄/Li was investigated, and the cycling performance at different rates and temperatures and the storage performance at 60 °C for a week are discussed for LiNi_0.5Mn_1.5O₄/Li. The results show that the lower initial coulombic efficiency is associated with the lower decomposition voltage of the commercial membrane and electrolyte, and the instability of aluminum current collector under the higher voltage. In addition, both versions of LiNi_0.5Mn_1.5O₄ can deliver about 115 mA?h g^?1 of initial discharge capacity at 1 C at 25 °C and 60 °C; however, it retains only 61.57 % of its initial capacity after the 130th cycles at 60 °C, which is much lower than the 94.46 % rate observed for LiNi_0.5Mn_1.5O₄ at 25 °C, and the cycling performance of the material at 1 C is better than that at 0.5 C. Meanwhile, the initial discharge capacity at 0.1 C after storing at 60 °C is 119.3 mA?h g^?1, which is only a little lower than 121.5 mA?h g^?1 recorded before storing; moreover, the spinel structure and surface state of LiNi_0.5Mn_1.5O₄ after storing at 60 °C has not been changed basically. These results indicate that the electrochemical stability of electrolyte is also related to the temperature. The serious capacity fading of LiNi_0.5Mn_1.5O₄ at 60 °C is attributed to the severe oxidation decomposition and the thermal decomposition in the range of cut-off voltage of the materials, and then the decomposition products interact with active materials to form a solid interface phase, leading to the larger electrode polarization and irreversible capacity loss. Meanwhile, the worse cycling performance at 0.5 C than that at 1 C is attributed to the longer interaction time between the electrolyte and the active materials. However, the storage performance of LiNi_0.5Mn_1.5O₄ corresponds to the thermal stability of electrolyte to a certain extent.     

Synthesis and electrochemical characterization of duo doped spinels (zinc and praseodymium) for use in lithium rechargeable batteries

LiMn₂O₄ and LiZn_xPr_yMn_2?x?yO₄ (x = 0.10–0.24; y = 0.01–0.10) powders have been synthesized by sol–gel method using palmitic acid as chelating agent. The synthesized samples have been subjected to thermo gravimetric and differential thermal analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDAX). The sol–gel route bestows low calcination temperature, shorter heating time, high purity, good control over stoichiometry, small particle size, high surface area, good surface morphology and better homogeneity, The XRD patterns reveal high degree of crystallinity and better phase purity. SEM and TEM images exhibit nano-sized nature particles with good agglomeration. EDAX peaks of Zn, Pr, Mn and O have been confirmed in actual compositions of LiMn₂O₄ and LiZn_xPr_yMn_2?x?yO₄. Charge–discharge studies of pristine spinel LiMn₂O₄ heated at 850 °C delivers discharge capacity of 132 mA h g^?1 corresponding to columbic efficiency of 73 % during the first cycle. At the end of 10th cycles, it delivers maximum discharge capacity of 112 mA h g^?1 with columbic efficiency of 70 % and capacity fade of 0.15 mA h g^?1 cycle^?1 over the investigated 10 cycles. Inter alia, all dopants concentrations, LiZn_0.10Pr_0.10Mn_1.80O₄ exhibits the better cycling performance (1st cycle discharge capacity: 130 mA h g^?1 comparing to undoped spinel 132 mA h g^?1) corresponding to columbic efficiency of 73 % with capacity fade of 0.12 mA h g^?1 cycle^?1.     

Improved electrochemical performance of LiNi0.5Mn1.5O4 as cathode of lithium ion battery by Co and Cr co-doping

Three samples, LiNi_0.5Mn_1.5O₄, LiNi_0.4Mn_1.4Co_0.2O₄, and LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ exhibits an improved performance compared with the Co-doped sample LiNi_0.4Mn_1.4Co_0.2O₄ and the undoped sample LiNi_0.5Mn_1.5O₄, especially at elevated temperature. At 25 °C, the discharge capacity of LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄ is 130 mAh g^?1 at 0.1 C and 103 mAh g^?1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g^?1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi_0.4Mn_1.4Co_0.2O₄ and LiNi_0.475Mn_1.475Co_0.05O₄, the co-doped sample LiNi_0.4Mn_1.4Cr_0.15Co_0.05O₄, with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi_0.5Mn_1.5O₄ by the co-doping was discussed.     

Electrochemical properties of nano-crystalline LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> synthesized by polymer-pyrolysis method

LiNi_0.5Mn_1.5O₄ powders were prepared through polymer-pyrolysis method. XRD and TEM analysis indicated that the pure spinel structure was formed at around 450 °C due to the very homogeneous intermixing of cations at the atomic scale in the starting precursor in this method, while the well-defined octahedral crystals appeared at a relatively high calcination temperature of 900 °C with a uniform particle size of about 100 nm. When cycled between 3.5 and 4.9 V at a current density of 50 mA/g, the as prepared LiNi_0.5Mn_1.5O₄ delivered an initial discharge capacity of 112.9 mAh/g and demonstrated an excellent cyclability with 97.3% capacity retentive after 50 cycles.     

Synthesis of single-crystal magnesium-doped spinel lithium manganate and its applications for lithium-ion batteries

Single-crystal magnesium-doped spinel lithium manganate cathode materials are prepared by the hydrothermal method followed by the heat treatment. XRD patterns reveal that Mg²⁺ions have already diffused into the Li_1.088Mn_1.912O₄ crystal structure and not affect the Fd3m space group. SEM images demonstrate that the magnesium-doped spinel lithium manganates show uniform polyhedral single crystals with 2–4 μm. Electrochemical performance demonstrates that the optimized composition of Li_1.088Mg_0.070Mn_1.842O₄ electrode exhibits the best electrochemical properties. It delivers 92.0 mAh g^?1 at 8C rates and corresponds to 90.8% capacity retention (vs. 1C), far higher than those of the pristine electrode (70.4 mAh g^?1 and 69.2%). In addition, the Li_1.088Mg_0.070Mn_1.842O₄ electrode also shows 95.5% capacity retention after 100 cycles at 1C, while the pristine electrode only shows 91.0% capacity retention. The excellent electrochemical performances of Li_1.088Mg_0.070Mn_1.842O₄ electrode are ascribed to the suppressed polarization, more stable crystal structure, and better kinetic characteristics.     

Structural degradation mechanism of oxysulfide spinel LiAl 0.24Mn1.76O3.98S0.02 cathode materials on high temperature cycling

Structural degradation of oxysulfide spinel, LiAl_0.24Mn_1.76O_3.98S_0.02 electrode in the 4 V region (4.3–3.0 V) cycled at high temperature has been investigated by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). The capacity loss during cycling is noticeably increased in the cell operation temperature from 50°C to 80°C. HRTEM study shows that the rock salt phase Li₂MnO₃ has been detected at the particle surface of discharged spinel electrode cycled at 80°C. The capacity loss of the spinel electrode at high temperature is ascribed to the MnO dissolution from the formed Li₂Mn₂O₄ at the particle surface.     

LiNi0.05Mn1.95O4的合成及对Li+的离子交换动力学

用溶胶-凝胶法合成出尖晶石结构的LiNi0.05Mn1.95O4,用0.5 mol·L-1过硫酸铵对其进行改型,制得锂离子筛LiNiMn-H.LiNiMn-H对Li+的饱和交换容量达5.2 mmol·g-1.用缩核模型(Shrinking-Core Model)处理该离子交换的反应动力学数据得到LiNiMn-H吸附Li+时离子交换反应的控制步骤是颗粒扩散控制(PDC),同时得到了该实验条件下锂离子筛LiNiMn-H吸附Li+的动力学方程和颗粒扩散系数De.     

BiFeO<Subscript>3</Subscript>-coated spinel LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> with improved electrochemical performance as cathode materials for lithium-ion batteries

Spinel LiNi_0.5Mn_1.5O₄ cathode material is a promising candidate for next-generation rechargeable lithium-ion batteries. In this work, BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials were prepared via a wet chemical method and the structure, morphology, and electrochemical performance of the materials were studied. The coating of BiFeO₃ has no significant impact on the crystal structure of LiNi_0.5Mn_1.5O₄. All BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials exhibit cubic spinel structure with space group of Fd3m. Thin BiFeO₃ layers were successfully coated on the surface of LiNi_0.5Mn_1.5O₄ particles. The coating of 1.0 wt% BiFeO₃ on the surface of LiNi_0.5Mn_1.5O₄ exhibits a considerable enhancement in specific capacity, cyclic stability, and rate performance. The initial discharge capacity of 118.5 mAh g^?1 is obtained for 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ with very high capacity retention of 89.11% at 0.1 C after 100 cycles. Meanwhile, 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ electrode shows excellent rate performance with discharge capacities of 117.5, 110.2, 85.8, and 74.8 mAh g^?1 at 1, 2, 5, and 10 C, respectively, which is higher than that of LiNi_0.5Mn_1.5O₄ (97.3, 90, 77.5, and 60.9 mAh g^?1, respectively). The surface coating of BiFeO₃ effectively decreases charge transfer resistance and inhibits side reactions between active materials and electrolyte and thus induces the improved electrochemical performance of LiNi_0.5Mn_1.5O₄ materials.     

Chemical and structural transformations in manganese aluminum spinel of the composition Mn1.5Al1.5O4 during heating and cooling in air

Single phase cubic spinel of the composition Mn_1.5Al_1.5O₄ is synthesized. Its crystal structure refinement shows that 0.4Mn+0.6Al are in the octahedral sites and 0.7Mn+0.3Al are in the tetrahedral sites. High temperature X-ray diffraction is used to analyze Mn_1.5Al_1.5O₄ behavior during heating and cooling in air. In a temperature range of 600°C to 700°C, initial spinel splits into layers, and the sample represents a twophase system: cubic spinel Mn_0.4Al_2.4O₄ and a phase based on β-Mn₃O₄. Above 900°C the sample again turns into single phase cubic spinel. The role of oxidizing processes in the decomposition of Mn_1.5Al_1.5O₄ caused by oxygenation and partial oxidation of Mn²⁺ to Mn³⁺ is shown. A scheme of structural transformations of manganese aluminum spinel during heating from room temperature and cooling from 950°C is proposed.     

Influence of annealing temperature on the electrochemical and surface properties of the 5-V spinel cathode material LiCr0.2Ni0.4Mn1.4O4 synthesized by a sol–gel technique

LiCr_0.2Ni_0.4Mn_1.4O₄ was synthesized by a sol–gel technique in which tartaric acid was used as oxide precursor. The synthesized powder was annealed at five different temperatures from 600 to 1,000 °C and tested as a 5-V cathode material in Li-ion batteries. The study shows that annealing at higher temperatures resulted in improved electrochemical performance, increased particle size, and a differentiated surface composition. Spinel powders synthesized at 900 °C had initial discharge capacities close to 130 mAh g^?1 at C and C/2 discharge rates. Powders synthesized at 1,000 °C showed capacity retention values higher than 85 % at C/2, C, and 2C rates at 25 °C after 50 cycles. Annealing at 600–800 °C resulted in formation of spinel particles smaller than 200 nm, while almost micron-sized particles were obtained at 900–1,000 °C. Chromium deficiency was detected at the surface of the active materials annealed at low temperatures. The XPS results indicate presence of Cr⁶⁺ impurity when the annealing temperature was not high enough. The study revealed that increased annealing temperature is beneficial for both improved electrochemical performance of LiCr_0.2Ni_0.4Mn_1.4O₄ and for avoiding formation of Cr⁶⁺ impurity on its surface.     

LaF3 surface-modified LiCr0.05Mn1.95O4 cathode material with improved high-temperature performances for lithium-ion batteries

The LaF₃ surface-modified LiCr_0.05Mn_1.95O₄ samples were synthesized by co-precipitation method and characterized by high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) and energy-dispersive X-ray detector (EDX). HAADF-STEM and EDX observations showed that LaF₃ deposited on the surface of LiCr_0.05Mn_1.95O₄ particles. When tested as the cathode materials for lithium-ion battery, the LaF₃-modified LiCr_0.05Mn_1.95O₄ exhibited significantly improved cyclic and rate performances at high temperature (55?°C). Electrochemical impedance spectrum analyses demonstrated that the surface of LiCr_0.05Mn_1.95O₄ modified by LaF₃ was much more stable during the electrochemical process and could greatly facilitate the charge–transfer reaction, which may be attributed to the protection of active material by LaF₃ from the HF attack.     

Synthesis and electrochemical properties of dual doped spinels LiNi_xAl_yMn_(2-x-y)O_4 via facile novel chelated sol–gel method as possible cathode material for lithium rechargeable batteries

LiMn_2O_4 and LiNi_xAlyMn_(2-x-y)O_4(x= 0.50;y = 0.05-0.50) powders have been synthesized via facile solgel method using Behenic acid as active cheiating agent.The synthesized samples are subjected to physical characterizations such as thermo gravimetric analysis(TG/DTA),X-ray diffraction(XRD),Fourier transform infrared spectroscopy(FT-IR),field-emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM) and electrochemical studies viz.,galvanostatic cycling properties,electrochemical impedance spectroscopy(EIS) and differential capacity curves(dQ/dE).Finger print XRD patterns of LiMn_2O_4 and LiNi_xAl_yMn_(2-x-y)O_4 fortify the high degree of crystallinity with better phase purity.FESEM images of the undoped pristine spinel illustrate uniform spherical grains surface morphology with an average particle size of 0.5 μm while Ni doped particles depict the spherical grains growth(50nm) with ice-cube surface morphology.TEM images of the spinel LiMn_2O_4 shows the uniform spherical morphology with particle size of(100 nm) while low level of Al-doping spinel(LiNio.5Alo.05Mn1.45O4) displaying cloudy particles with agglomerated particles of(50nm).The LiMn_2O_4 samples calcined at 850℃ deliver the discharge capacity of 130 mAh/g in the first cycle corresponds to 94%coiumbic efficiency with capacity fade of 1.5 mAh/g/cycle over the investigated 10 cycles.Among all four dopant compositions investigated,LiNi_(0.5)Al_(0.05)Mn_(1.45)O_4 delivers the maximum discharge capacity of 126 mAh/g during the first cycle and shows the stable cycling performance with low capacity fade of 1 mAh/g/cycle(capacity retention of 92%) over the investigated 10 cycles.Electrochemical impedance studies of spinel LiMn_2O_4 and LiNi_(0.5)Al_(0.05)Mn_(1.45)O_4 depict the high and low real polarization of 1562 and 1100 Ω.     

Electrochemical performance of nano-sized ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V materials at elevated temperatures

ZnO-coated LiNi_0.5Mn_1.5O₄ powders with excellent electrochemical cyclability and structural stability have been synthesized. The electrochemical performance and structural stability of ZnO-coated LiNi_0.5Mn_1.5O₄ electrodes in the 5 V region at elevated temperature has been studied as function of the level of ZnO coating. The 1.5 wt% ZnO-coated LiNi_0.5Mn_1.5O₄ electrode delivers an initial discharge capacity of 137 mAh g⁻¹ with excellent cyclability at elevated temperature even at 55 °C. The reason for the excellent cycling performance of ZnO-coated LiNi_0.5Mn_1.5O₄ electrode is largely attributed to ZnO playing an important role of HF getting in the electrolyte.     

Synthesis and electrochemical performance of LiCr x Mn2-xO4(x=0,0.02,0.05,0.08,0.10) powders by ultrasonic coprecipitation

LiCr _x Mn_2-x O₄(x=0, 0.02, 0.05, 0.08, 0.10) compounds with a spinel crystal structure have been prepared by a novel ultrasonic co-precipitation method. The effects of the calcination temperature and the citric acid-to-metal ion molar ratio (R) on powder characteristics and electrochemical performance are evaluated. It is found that the optimum R and sintering temperature for LiCr _x Mn_2-x O₄ materials by the ultrasonic co-precipitation method are R= 5/6 and 800°C, respectively. The calcined powders are loosely bound agglomerates of abnormally coarsened particles with a narrow range of particle sizes. The effect of Cr doping was also explored. Electrochemical studies show that optimum materials synthesized by the ultrasonic co-precipitation method demonstrate good cycling performance.     

Structure and electrochemical performances of co-substituted LiSm x La0.2-x Mn1.80O4 cathode materials for rechargeable lithium-ion batteries

Spinel LiMn₂O₄ and Sm, La co-substituted LiSm _x La_0.2-x Mn_1.80O₄ (x?=?0.05, 0.10 and 0.15) cathode materials were synthesized by sol–gel method using aqueous solutions of metal nitrates and tartaric acid as chelating agent at 600 °C for 10 h. The structure and electrochemical properties of the synthesized materials were characterized by using thermogravimetric/differential thermal analysis, X-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, cyclic voltammetry, charge/discharge and electrochemical impedance spectroscopy studies. XRD analysis indicated that all the prepared samples were mainly belong to cubic crystal form with Fd3m space group. LiSm_0.10La_0.10Mn_1.80O₄ exhibits capacity retention of 90 % and 82 % after 100 cycles at room temperature (30 °C) and at elevated temperature (50 °C) at a rate of 0.5-C, respectively, much higher than those of the pristine LiMn₂O₄ (74 % and 60 %). Among all the compositions, LiSm_0.10La_0.10Mn_1.80O₄ cathode has improved the structural stability, high-capacity retention, better elevated temperature performance and excellent electrochemical performances of the rechargeable lithium-ion batteries.     

Structure and electrochemical performance of spinel LiMn1.95Ni0.05O3.98F0.02 coated with Li-La-Zr-O solid electrolyte

LiMn_1.95Ni_0.05O_3.98F_0.02 octahedral particles with lithium-ion solid electrolyte Li₇La₃Zr₂O₁₂ (LLZO) coating are prepared by a Pechini method. The relationship between the structure and electrochemical performance of the modified samples is investigated. As revealed by X-ray diffraction and scanning electron microscope, LLZO coating does not change the cubic spinel crystal structure of the pristine matrix (space group $ Fd\overline{3}m $ ). Moreover, the LLZO coating materials exist as nanosheets or nanoparticles. The morphology of the coating varies as the weight percentage increases from 1.0 to 3.0. LiMn_1.95Ni_0.05O_3.98F_0.02 coated with 2.0 wt% LLZO exhibits better cycle performance and rate capability at elevated temperature (i.e., 55 °C), while the coating exists as distinct reticulation covering the surface.     

Comparison of different soft chemical routes synthesis of nanocrystalline LiMn2O4 and their influence on its physicochemical properties

A comparative study of nanocrystalline spinel LiMn₂O₄ powders prepared by two different soft chemical routes such as solution and sol-gel methods using lithium and manganese acetates are the precursors under different calcination temperatures. The dependence of the physicochemical properties of the spinel LiMn₂O₄ powder has been extensively investigated by using thermal analysis (TGA/DTA), FTIR, X-ray diffraction studies, SEM, specific surface area (BET) and electrical conductivity measurements. The results show that pure LiMn₂O₄ can be prepared from acetate precursors as starting materials at a low temperature of 600°C from solution route and 500°C from sol-gel method. The charge-discharge characteristics and the cycling behavior of Li/1M LiBF₄-EC/DEC electrolyte / LiMn₂O₄cells revealed that LiMn₂O₄ calcined at higher temperatures showed a high initial capacity, while the LiMn₂O₄calcined at lower temperatures exhibited a good cycling behavior.