四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Total synthesis of erythromycin B

We report the details of the first total synthesis of erythromycin B using two different strategies for the end game. The first of these follows a classical approach in which the desosamine and cladinose residues are sequentially appended to a macrocyclic lactone, which was formed by cyclization of a seco acid derivative, to give a bis-glycosylated macrolide intermediate that is converted into erythromycin B. The second strategy features an abiotic approach in which a seco acid bearing a desosamine residue is cyclized to give a monoglycosylated macrocyclic lactone that is then transformed into erythromycin B via a sequence of steps involving refunctionalizations and a glycosylation to introduce the cladinose moiety. Attempts to prepare a bis-glycosylated seco acid by de novo synthesis were unsuccessful. The syntheses of the key seco acid intermediates feature the oxidative transformation of a furan containing C(3)-C(10) to provide a dioxabicyclo[3.3.1]nonenone that served as a template on which to create the stereocenters at C(6) and C(8). A stereoselective aldol reaction was used to establish the C(11)-C(15) segment, and a stereoselective crotylation was implemented to introduce the propionate subunit comprising C(1)-C(2).     

Foldamer simulations: novel computational methods and applications to poly-phenylacetylene oligomers

We apply several methods to probe the ensemble kinetic and structural properties of a model system of poly-phenylacetylene (pPA) oligomer folding trajectories. The kinetic methods employed included a brute force accounting of conformations, a Markovian state matrix method, and a nonlinear least squares fit to a minimalist kinetic model used to extract the folding time. Each method gave similar measures for the folding time of the 12-mer chain, calculated to be on the order of 7 ns for the complete folding of the chain from an extended conformation. Utilizing both a linear and a nonlinear scaling relationship between the viscosity and the folding time to correct for a low simulation viscosity, we obtain an upper and a lower bound for the approximate folding time within the range 70 ns相似文献   

Analysis and prediction of combinatorial chemistry synthesis and screening data

The goal of combinatorial chemistry is to simultaneously synthesize sets of compounds possessing properties that are then distinguished through screening. As the size of a compound set increases, data analysis becomes more challenging. Analysis of Variance (ANOVA) is an accepted statistical method that offers a straightforward solution to this problem. Two steps encountered by combinatorial scientists appear well suited to ANOVA: the prediction of synthetic outcomes (purity and yield) of set members and the analysis of screening data to identify combinations of reagent inputs that result in molecules with a desired property. To illustrate, a subset of a combinatorial array, referred to as a reaction rehearsal set, is evaluated to create a model predictive of the individual synthetic outcomes of the full matrix. In a second exercise, the biochemical screening data obtained from a combinatorial library is analyzed to identify reagent interactions that result in molecules possessing the sought activity.     

Transparent coatings made from spray deposited colloidal suspensions

The goal of this study is to elaborate few-micrometer thick optically active coatings based on nanoparticles spray-deposited onto a substrate and to control their scattering properties through a progressive suppression of the coffee-ring effect. The modification of the aggregation state of the nanoparticles to be sprayed induces a change of the surface roughness of the films and consequently of their optical transmission. We draw the counterintuitive conclusion that a nonstable colloidal solution gives a smoother coating than a highly stabilized colloidal solution, leading to a more transparent coating. This phenomenon is demonstrated in the case of commercial TiO(2) nanoparticles, as well as of homemade luminescent YVO(4):Eu nanoparticles, and seems to be generalized to a large range of systems.     

Dominant representations and a markaracter table for a group of finite order

Summary The concept of markaracter is proposed to discuss marks and characters for a group of finite order on a common basis. Thus, we consider a non-redundant set of dominant subgroups and a non-redundant set of dominant representations (SDR), where coset representations concerning cyclic subgroups are named dominant representations (DRs). The numbers of fixed points corresponding to each DR are collected to form a row vecter called a dominant markaracter (mark-character). Such dominant markaracters for the SDR are collected as a markaracter table. The markaracter table is related to a subdominant markaracter table of its subgroup so that the corresponding row of the former table is constructed from the latter. The data of the markaracter table are in turn used to construct a character table of the group, after each character is regarded as a markaracter and transformed into a multiplicity vector. The concept of orbit index is proposed to classify multiplicity vectors; thus, the orbit index of each DR is proved to be equal to one, while that corresonding to an irreducible representation is equal to zero.     

Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

Mechanisms for NH3 decomposition on Si(100)-(2 x 1) surface: a quantum chemical cluster model study

In this paper, we present a detailed mechanism for the complete decomposition of NH3 to NHx(a) (x = 0-2). Our calculations show that the initial decomposition of NH3 to NH2(a) and H(a) is facile, with a transition-state energy 7.4 kcal mol-1 below the vacuum level. Further decomposition to N(a) or recombination-desorption to NH3(g) is hindered by a large barrier of approximately 46 kcal mol-1. There are two plausible NH2 decomposition pathways: 1) NH2(a) insertion into the surface Si-Si dimer bond, and 2) NH2(a) insertion into the Si-Si backbond. We find that pathway (1) leads to the formation of a surface Si = N unit, similar to a terminal Si = Nt pair in silicon nitride, Si3N4, while pathway (2) leads to the formation of a near-planar, subsurface Si3N unit, in analogy to a central nitrogen atom (Nc) bounded to three silicon atoms in the Si3N4 environment. Based on these results, a plausible microscopic mechanism for the nitridation of the Si(100)-(2 x 1) surface by NH3 is proposed.     

Spreading and retraction dynamics of smectic liquid crystal domains at interfaces

The spreading of a liquid drop over liquid subphase can be driven by change in interfacial tension mediated through a surfactant, volatile solvent or photoinduced reaction. In contrast to the spreading dynamics of a liquid drop, a liquid crystal drop with anisotropic structure can lead to interesting behaviour due to its viscoelasticity and anchoring at the interfaces. Recently, we have reported studies on unusual spreading and retraction dynamics of a smectic domain doped with a fluorescent dye in the collapsed state of a Langmuir monolayer. Under epifluorescence microscope, during excitation, a stack of layers of the dye-doped smectic domain gets sheared causing the domain to spread asymmetrically. Further, due to line tension, the domain transforms into a circular shape. We also find the domain size to be about twice that of the initial size. Interestingly, in the absence of excitation, the domain retracts to a smaller area. During retraction of the domain, successive generation of edge dislocation loops arising from a nucleus results in an increase in the domain thickness. The dynamics of spreading and retraction of the domain can be understood by invoking changes in the spreading coefficient due to photoinduced modification of the interfacial tension.     

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Voronoi binding site models: Calculation of binding modes and influence of drug binding data accuracy

A new and accurate method for calculating the geometrically allowed modes of binding of a ligand molecule to a Voronoi site model is reported. It is shown that the feasibility of the binding of a group of atoms to a Voronoi site reduces to a simple set of linear and quadratic inequalities and quadratic equalities which can be solved by minimization of a simple function. Newton's numerical method of solution coupled to a line search proved to be successful. Moreover, we have developed efficient molecular and site data bases to discard quickly infeasible binding modes without time-consuming numerical calculation. The method is tested with a data set consisting of the binding constants for a series of biphenyls binding to prealbumin. After determination of the conformation space of the molecules and proposal of a Voronoi site geometry, the geometrically feasible modes are calculated and the energy interaction parameters determined to fit the observed binding energies to the site within experimental error ranges. We actually allowed these ranges to vary in order to study the influence of their broadness on the site geometry and found that as they increase, one can first model the receptor as a three-region site then as a single region site, but never as a two-region site.     

Motion of liquid drops on surfaces induced by asymmetric vibration: role of contact angle hysteresis

Hysteresis of wetting, like the Coulombic friction at solid/solid interface, impedes the motion of a liquid drop on a surface when subjected to an external field. Here, we present a counterintuitive example, where some amount of hysteresis enables a drop to move on a surface when it is subjected to a periodic but asymmetric vibration. Experiments show that a surface either with a negligible or high hysteresis is not conducive to any drop motion. Some finite hysteresis of contact angle is needed to break the periodic symmetry of the forcing function for the drift to occur. These experimental results are consistent with simulations, in which a drop is approximated as a linear harmonic oscillator. The experiment also sheds light on the effect of the drop size on flow reversal, where drops of different sizes move in opposite directions due to the difference in the phase of the oscillation of their center of mass.     

Chip-based capillary electrophoresis with an electrodeless nanospray interface

A sheathless and electrodeless nanospray interface has been used to interface a polycarbonate capillary electrophoresis (CE) chip to a mass spectrometer (MS). The chip was made of two flat polycarbonate plates which were bolted together. Channels were imprinted in one of the plates with metal wires, using a hydraulic press. A short tapered capillary connected to the chip was used as the nanospray emitter. The advantage of this electrodeless interface is that it was not necessary to apply a electrospray voltage to the chip or the nanospray emitter. Instead, the CE voltage already applied to the buffer compartment on the chip, to drive the electrophoresis, was used to generate the spray also. A low conductivity buffer of 1.25 mmol/L ammonium acetate in 80% methanol was used to obtain a large electric field across the buffer channel. The performance of the device was evaluated by analyzing a mixture of three beta-agonists Relative standard deviation (RSD) values obtained were between 4.8 and 5.0%. A sample concentration of 40 nmol/L resulted in a signal-to-noise ratio of 2 to 5 for the different components. Compared to a conventional CE analysis in a fused silica capillary with UV detection, only a minor loss of resolution was observed, which can be attributed to the design of the chip.     

A silicate gel for promoting deposition of lipid bilayers

A simple method for modifying a polymer surface to induce lipid bilayer formation by vesicle fusion is described. A silicate gel was prepared by condensation of tetraethyl orthosilicate (TEOS) in the presence of acid. When applied to a poly(methylmethacrylate) substrate, either a rough or a smooth layer could be produced, depending on the method used for the application. The smooth surface induced formation of a supported lipid bilayer by fusion of lipid vesicles; the rough silicate surface induced adsorption of a vesicle layer. A high-frequency acoustic waveguide device was used to follow the initial adsorption of vesicles, the transition from a vesicle layer to a bilayer, and the formation of a complete bilayer; the time required to form a bilayer was determined as a function of lipid concentration in suspension. The presence of a bilayer on the smooth silicate surface was confirmed by fluorescence recovery after photobleaching. An additional procedure is described to modify a gold surface to induce bilayer formation.     

Terminal trifluoromethyl-alkoxy and-alkenyloxy nematic liquid crystals for LCDs with active matrix addressing

We have synthesized a new class of compounds suitable for LCD applications, incorporating a trifluoromethyl group in the terminal alkoxy- or alkenyloxy-chain. These compounds appear to fulfil many of the requirements for use in TN-LCDs. Core units containing a cyclohexyl ring, which tend to induce a lower viscosity than that of the analogous aromatic materials, were synthesized. Systems containing several aromatic rings were also prepared with a view to producing compounds of high birefringence. Compounds containing a lateral fluorosubstituent as well as a polar substituent in a terminal position were synthesized in order to generate a high positive value of the dielectric anisotropy. Molecules incorporating a bicyclo[2.2.2]octane ring were also synthesized in order to produce a high nematic clearing point and to influence the elastic constants. Compounds with three 1,4-disubstituted rings were synthesized with a view to producing materials with a high nematic clearing point and as low a melting point as possible. A series of compounds with a carbon-carbon double bond in the terminal chain was prepared in an attempt to produce compounds with appropriate values and ratios of the elastic constants.     

Chemical adaptor systems

"Chemical adaptor systems" are molecules used to link different functionalities, based on unique reactivity that allows controlled fragmentation. Two different mechanistic reactivities were used to prepare chemical adaptor systems. The first is based on a spontaneous intra-cyclization reaction to form a stable ring molecule. Cleavage of the trigger generates a free nucleophile, for example, an amine group, which undergoes intra-cyclization to release the target molecule from the handle part (e.g., a targeting antibody or a solid support for synthesis). The second applied reactivity is an elimination reaction, which is usually based on a quinone-methide-type rearrangement. Similarly, cleavage of the trigger generates a free phenol functionality, which can undergo a self-elimination reaction through a quinone-methide rearrangement to release the target molecule. The adaptor molecules have been applied in the field of drug delivery to release a drug from a targeting device and in the field of solid-phase synthesis to release a synthetic molecule from the solid support. A chemical adaptor molecule has also been used as a building unit to construct dendrimers with a triggered fragmentation.     

Investigation of isothiocyanate addition to alkylidene derivatives of malononitrile and cyanoacetic acid esters

Addition of arylisothiocyanates to active methylene compounds leads to a variety of compounds depending on the structure of the starting material and conditions used to conduct the addition. Addition of arylisothiocyanate to 1c leads to a pyrido[2,3-d]pyrimidine resulting from addition of a second mole of cyanate to the initial adduct. Addition of arylisothiocyanate to 1b led to a mixture of pyridine and thiopyran adducts, while addition to 1a led to open chain structures.     

Force balance of particles trapped at fluid interfaces

We study the effective forces acting between colloidal particles trapped at a fluid interface which itself is exposed to a pressure field. To this end, we apply what we call the "force approach," which relies solely on the condition of mechanical equilibrium and turns to be in a certain sense less restrictive than the more frequently used "energy approach," which is based on the minimization of a free energy functional. The goals are (i) to elucidate the advantages and disadvantages of the force approach as compared to the energy approach, and (ii) to disentangle which features of the interfacial deformation and of the capillary-induced forces between the particles follow from the gross feature of mechanical equilibrium alone, as opposed to features which depend on the details of, e.g., the interaction of the interface with the particles or the boundaries of the system. First, we derive a general stress-tensor formulation of the forces at the interface. On that basis we work out a useful analogy with two-dimensional electrostatics in the particular case of small deformations of the interface relative to its flat configuration. We apply this analogy in order to compute the asymptotic decay of the effective force between particles trapped at a fluid interface, extending the validity of the previous results and revealing the advantages and limitations of the force approach compared to the energy approach. It follows the application of the force approach to the case of deformations of a nonflat interface. In this context, we first compute the deformation of a spherical droplet due to the electric field of a charged particle trapped at its surface and conclude that the interparticle capillary force is unlikely to explain certain recent experimental observations within such a configuration. We finally discuss the application of our approach to a generally curved interface and show as an illustrative example that a nonspherical particle deposited on an interface forming a minimal surface is pulled to regions of larger curvature.     

Direct introduction of a hydrazide group into a quartz crystal microbalance surface with dodecanoic hydrazide embedded in a hybrid bilayer membrane

Hydrazide group has a potential of immobilizing an antibody on a sensor surface in a way that ensures an optimal orientation and efficiency of the antibody. However, a multi-step chemical process, required for the preparation of a hydrazide group, is a barrier to its extensive application. This paper describes a new method to introduce a hydrazide group to a sensor surface by a one-step process using dodecanoic hydrazide. The method is based on an ability of the dodecanoic hydrazide to be incorporated into a hybrid bilayer membrane (HBM) layer, thereby presenting its hydrazide group to the surface. Liposome containing dodecanoic hydrazide was added to a hydrophobic self-assembled monolayer surface of a quartz crystal microbalance for the formation of a HBM. Then, the hydrazide group, presented in the surface of the HBM layer, was utilized for the oriented immobilization of an antibody via its carbohydrate moiety which was partially oxidized prior to the conjugation reaction. Activity and stable status of the incorporated dodecanoic hydrazide was revealed by the efficiency and reproducibility of the resulting immunosensor chip.