High salt stability and protein resistance of poly(L-lysine)-g-poly(ethylene glycol) copolymers covalently immobilized via aldehyde plasma polymer interlayers on inorganic and polymeric substrates

The electrostatic adsorption onto charged surfaces of comb copolymers comprising a polyelectrolyte backbone and pendent PEG side chains, such as poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG), has in previous studies provided protein-repellent thin coatings, particularly on metal oxide surfaces. A drawback of this approach is, however, the instability of such adsorbed layers under extreme pH values or high ionic strength. We have overcome this limitation in the present study by covalently immobilizing PLL-g-PEG copolymers onto aldehyde plasma-modified substrates. Silicon wafers, optical waveguide chips, and perfluorinated ethylene-co-propylene (FEP) polymer substrates were first coated with a thin plasma polymer layer using a propionaldehyde plasma, followed by covalent immobilization of PLL-g-PEG via reductive amination between amine groups of the PLL backbone with aldehyde groups on the plasma-deposited interlayer. The stability in high salt media and the protein resistance of different molecular architectures of immobilized PLL-g-PEG layers were quantitatively investigated by XPS, an optical waveguide technique (OWLS), and ToF-SIMS. The adsorption of bovine serum albumin was found to be below the detection limit (<2 ng/cm(2)), as for electrostatically adsorbed PLL-g-PEG layers. However, after 24 h of exposure of covalently immobilized layers of PLL-g-PEG to high ionic strength buffer (2400 mM NaCl), no significant change in the protein resistance was observed, whereas under the same conditions electrostatically adsorbed PLL-g-PEG coatings lost their protein resistance. Moreover, covalent immobilization via an aldehyde plasma interlayer enabled the application of PLL-g-PEG layers onto substrates such as FEP onto which electrostatic binding is not possible. These findings create a generic platform for the covalent immobilization of PLL-g-PEG onto a wide variety of substrates.     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

Solution-based assembly of conductive gold film on flexible polymer substrates

Conductive films of gold were assembled on flexible polymer substrates such as Kapton and polyethylene using a solution-based process. The polymer substrates were modified by using argon plasma and subsequent coupling of silanes with amino- or mercapto- terminal groups. These modified surfaces were examined by X-ray photoelectron spectroscopy and contact angle measurements. Colloidal gold was assembled onto the silane-modified surface from solution. The gold particles are attached to the surface by covalent interactions with the thiol or amine group. Formation of a conductive film is achieved by increasing the coverage of gold by using a "seeding" method to increase the size of the attached gold particles. Field emission scanning electron microscopy was used to follow the growth of the film. The surface resistance of the films, measured using a four-point probe, was about 1 Omega/sq.     

Glass surfaces grafted with high-density poly(ethylene glycol) as substrates for DNA oligonucleotide microarrays

Surfaces carrying a dense layer of poly(ethylene glycol) (PEG) were prepared, characterized, and tested as substrates for DNA oligonucleotide microarrays. PEG bis(amine) with a molecular weight of 2000 was grafted onto silanized glass slides bearing aldehyde groups. After grafting, the terminal amino groups of the PEG layer were derivatized with the heterobifunctional cross-linker succinimidyl 4-[p-maleimidophenyl]butyrate to permit the immobilization of thiol-modified DNA oligonucleotides. The stepwise chemical modification was validated with X-ray photoelectron spectroscopy. Goniometry indicated that the PEG grafting procedure reduced surface inhomogeneities present after the silanization step, while atomic force microscopy and ellipsometry confirmed that the PEG layer was dense and monomolecular. Hybridization assays using DNA oligonucleotides and fluorescence imaging showed that PEG grafting improved the yield in hybridization 4-fold compared to non-PEGylated maleimide-derivatized surfaces. In addition, the PEG layer reduced the nonspecific adsorption of DNA by a factor of up to 13, demonstrating that surfaces with a dense PEG layer represent suitable substrates for DNA oligonucleotide microarrays.     

Surface modification. II. Functionalization of solid surfaces with vinylic monomers

A new method to functionalize surfaces of solid substrates such as glass, silicon crystals, and silica microspheres with appropriate vinylic monomers, i.e., methyl vinyl ketone, methyl acrylate, methacrolein, and acrolein, is described. The surface modification process was performed through the following sequence of reactions: (a) derivatization of the surfaces with to-nitrile groups by interacting the substrates with SiCl₃(CH₂)₃CN; (b) subsequent reduction of the a)-nitrile groups with diborane to w-amine groups; (c) binding of the vinylic monomers to the surfaces via the to-amine groups. pK_1/2 of the surface primary amine groups, as determined by contact angle titration, was found to be 2–4 units lower than the pK_1/2 values of primary amine analogous in solution. Methyl vinyl ketone and methyl acrylate were covalently bound to the amine surfaces only under basic conditions via the Michael addition reaction. Methacrolein and acrolein were covalently bound to the amine surfaces under both acidic and basic conditions via two major reactions: the Michael addition reaction and Schiff base bond formation. The concentration of the aldehyde groups of the surfaces obtained by the reaction with methacrolein and acrolein was significantly higher than that obtained using the common, published method in which glutaraldehyde interacts with the amine surfaces.     

Immobilized streptavidin gradients as bioconjugation platforms

Surface density gradients of streptavidin (SAV) were created on solid surfaces and demonstrated functionality as a bioconjugation platform. The surface density of immobilized streptavidin steadily increased in one dimension from 0 to 235 ng cm(-2) over a distance of 10 mm. The density of coupled protein was controlled by its immobilization onto a polymer surface bearing a gradient of aldehyde group density, onto which SAV was covalently linked using spontaneous imine bond formation between surface aldehyde functional groups and primary amine groups on the protein. As a control, human serum albumin was immobilized in the same manner. The gradient density of aldehyde groups was created using a method of simultaneous plasma copolymerization of ethanol and propionaldehyde. Control over the surface density of aldehyde groups was achieved by manipulating the flow rates of these vapors while moving a mask across substrates during plasma discharge. Immobilized SAV was able to bind biotinylated probes, indicating that the protein retained its functionality after being immobilized. This plasma polymerization technique conveniently allows virtually any substrate to be equipped with tunable protein gradients and provides a widely applicable method for bioconjugation to study effects arising from controllable surface densities of proteins.     

Chemical modifications of inert organic monolayers with oxygen plasma for biosensor applications

In this paper we present a study of using oxygen plasma for chemically modifying inert hydrocarbon self-assembled monolayers of octadecyltrichlorosilane (OTS-SAMs) and rendering active surfaces for protein immobilization. Detailed surface modification and protein immobilization were characterized by using ellipsometry, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared-attenuated total reflectance spectroscopy, and fluorescence microscopy. Our XPS results showed that the surface reaction between OTS-SAMs and oxygen plasma can generate new surface functional groups such as alcohol (C-O), aldehyde (C=O), and carboxylic acid (O-C=O), and their compositions can be controlled by using different treatment times and powers. A short treatment time ( approximately 1 s) and high power (10 W) can lead to a higher density of aldehyde groups, which can serve as linker groups for protein immobilization through the formation of Schiff bases with the amine groups of proteins. By using the fluorescence immunostaining method, we confirmed that human immunoglobulin (IgG) can be immobilized on a glass slide, only if the surface was decorated with OTS-SAMs and if the OTS-SAMs were pretreated with oxygen plasma. The protein immobilized on the oxygen-plasma-treated surface can only be recognized by using a highly specific antibody, FITC-anti-IgG, but not FITC-anti-biotin.     

Surface and bulk modification of polyolefins by functional aryl nitrenes as highly reactive intermediates

Aromatic azides with hindered amine light stabilizer (HALS) residues or hydrophilic groups such as glucose, sucrose and dextrine residues were synthesized and used for surface modification of polyolefins. By UV‐irradiation nitrenes were formed, which are able to react with polyolefin surfaces. By photochemical immobilization of the carbohydrates hydrophilicity of PE and PP was strongly increased (surface tensions > 44mN/m). Light stability of PP surfaces modified with HALS azides was comparable with PP, stabilised with Tinuvin 770. Bulk modification of ethylene‐propylene and ethylene‐octene copolymers was achieved by grafting nitrenes formed by thermal decomposition of azido benzoic acid. In a circulating air oven up to 1.55 wt% amino benzoic acid residues could be bonded covalently to ethylene‐propylene‐copolymers, less than half of it to ethylene‐octene‐copolymers. Reactive extrusion resulted in grafting yields of more than 50% for both types of copolymers.     

Immobilization of amine-modified oligonucleotides on aldehyde-terminated alkanethiol monolayers on gold

Chemistry is described for the fabrication of DNA arrays on gold surfaces. Alkanethiols modified with terminal aldehyde groups are used to prepare a self-assembled monolayer (SAM). The aldehyde groups of the monolayer may be reacted with amine-modified oligonucleotides or other amine-bearing biomolecules to form a Schiff base, which may then be reduced to a stable secondary amine by treatment with sodium cyanoborohydride. The surface modifications and reactions are characterized by polarization modulation Fourier transform infrared reflection absorption spectroscopy (PM-FTIRRAS), and the accessibility, binding specificity, and stability of the DNA-modified surfaces are demonstrated in hybridization experiments.     

"Click-functional" block copolymers provide precise surface functionality via spin coating

There are few existing methods for the quantitative functionalization of surfaces, especially for polymeric substrates. We demonstrate that alkyne end-functional diblock copolymers can be used to provide precise areal densities of reactive functionality on both hard (e.g., glass and silicon oxide) and soft (i.e., polymeric) substrates. Alkyne functionality is extremely versatile because the resultant functional surfaces are reactive toward azide functional molecules by Sharpless click chemistry. Spin-coated films of alpha-alkyne-omega-Br-poly( tert-butylacrylate- b-methylmethacrylate) (poly( tBA-MMA)) spontaneously self-assemble on the aforementioned substrates to present a surface monolayer of PtBA with a thickness in the range of 1 to 9 nm. The PMMA block physisorbs to provide multivalent anchoring onto hard substrates and is fixed onto polymer surfaces by interpenetration with the substrate polymer. The areal density of alkyne functional groups is precisely controlled by adjusting the thickness of the block copolymer monolayer, which is accomplished by changing either the spin coating conditions (i.e., rotational speed and solution concentration) or the copolymer molecular weight. The reactivity of surface-bound alkynes, in 1,3-dipolar cycloaddition reactions or by so-called "click chemistry", is demonstrated by covalent surface immobilization of fluorescently labeled azides. The modificed surfaces are characterized by atomic force microscopy (AFM), contact angle, ellipsometry, fluorescent imaging and angle-dependent X-ray photoelectron spectroscopy (ADXPS) measurements. Microarrays of covalently bound fluorescent molecules are created to demonstrate the approach and their performance is evaluated by determining their fluorescence signal-to-noise ratios.     

Integrated surface modification of fully polymeric microfluidic devices using living radical photopolymerization chemistry

Surface modification using living radical polymerization (LRP) chemistry is a powerful technique for surface modification of polymeric substrates. This research demonstrates the ability to use LRP as a polymer substrate surface‐modification platform for covalently grafting polymer chains in a spatially and temporally controlled fashion. Specifically, dithiocarbamate functionalities are introduced onto polymer surfaces using tetraethylthiuram disulfide. This technique enables integration of LRP‐based grafting for the development of an integrated, covalent surface‐modification method for microfluidic device construction. The unique photolithographic method enables construction of devices that are not substrate‐limited. To demonstrate the utility of this approach, both controlled fluid flow and cell patterning applications were demonstrated upon modification with various chemical functionalities. Specifically, poly(ethylene glycol) (375) monoacrylate and trifluoroethyl acrylate were grafted to control fluidic flow on a microfluidic device. Before patterning, surface‐functionalized samples were characterized with both goniometric and infrared spectroscopy to ensure that photografting was occurring through pendant dithiocarbamate functionalities. Near‐infrared results demonstrated conversion of grafted monomers when dithiocarbamate‐functionalized surfaces were used, as compared to dormant control surfaces. Furthermore, attenuated total reflectance/infrared spectroscopy results verified the presence of dithiocarbamate functionalities on the substrate surfaces, which were useful in grafting chains of various functionalities whose contact angles ranged from 7 to 86°. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1404–1413, 2006     

Formation of Polymer Nanolayers with Special Properties at Polymer Surfaces

A principal possibility of the utilization of polymer peroxides for the modification of polymer surfaces that provides an immobilization of the tailored quantity of peroxide groups at them has been established. The processes of polymer surface activation with following “grafting from” or “grafting to” utilizing immobilized peroxide groups has been studied using a FTIR-ATR spectroscopy, ellipsometry and measurements of contact angles. The proposed technique of polymer surface activation is based on the universal ability of carbon chain polymer to participate the free radical reactions.     

Immobilization of amphiphilic polycations by catechol functionality for antimicrobial coatings

A new strategy for preparing antimicrobial surfaces by a simple dip-coating procedure is reported. Amphiphilic polycations with different mole ratios of monomers containing dodecyl quaternary ammonium, methoxyethyl, and catechol groups were synthesized by free-radical polymerization. The polymer coatings were prepared by immersing glass slides into a polymer solution and subsequent drying and heating. The quaternary ammonium side chains endow the coatings with potent antibacterial activity, the methoxyethyl side chains enable tuning the hydrophobic/hydrophilic balance, and the catachol groups promote immobilization of the polymers into films. The polymer-coated surfaces displayed bactericidal activity against Escherichia coli and Staphylococcus aureus in a dynamic contact assay and prevented the accumulation of viable E. coli, S. aureus, and Acinetobacter baumannii for up to 96 h. Atomic force microscopy (AFM) images of coating surfaces indicated that the surfaces exhibit virtually the same smoothness for all polymers except the most hydrophobic. The hydrophobic polymer without methoxyethyl side chains showed clear structuring into polymer domains, causing high surface roughness. Sum-frequency generation (SFG) vibrational spectroscopy characterization of the surface structures demonstrated that the dodecyl chains are predominantly localized at the surface-air interface of the coatings. SFG also showed that the phenyl groups of the catechols are oriented on the substrate surface. These results support our hypothesis that the adhesive or cross-linking functionality of catechol groups discourages polymer leaching, allowing the tuning of the amphiphilic balance by incorporating hydrophilic components into the polymer chains to gain potent biocidal activity.     

In situ estimation of the chemical and mechanical contributions in local adhesion force measurement with AFM: the specific case of polymers

The atomic force microscope (AFM) was used to perform surface force measurements in contact mode to investigate surface properties of model systems at the nanoscale. Two types of model systems were considered. The first one was composed of a rigid substrate (silicon plates) which was chemically modified by molecular self-assembling (SAMs) to display different surface properties (hydroxyl, amine, methyl and ester functional groups). The second system consists of model polymer networks (cross-linked polydimethylsiloxane or PDMS) of variable mechanical properties, whose surfaces were chemically modified with the same groups as before with silicon substrates. The comparison of the force curves obtained from the two model systems shows that the viscoelastic or mechanical contribution dominates in the adhesion on polymer substrates. Finally, a relationship, which expresses the separation energy at a local scale as a function of the energy dissipated within the contact zone, on one hand and the surface properties of the polymer on the other, was proposed.     

Dense passivating poly(ethylene glycol) films on indium tin oxide substrates

We describe the formation and characterization of surface-passivating poly(ethylene glycol) (PEG) films on indium tin oxide (ITO) glass substrates. PEG chains with a molecular weight of 2000 and 5000 D were covalently attached to the substrates in a systematic approach using different coupling schemes. The coupling strategies included the direct grafting with PEG-silane, PEG-methacrylate, and PEG-bis(amine), as well as the two-step functionalization with aldehyde-bearing silane films and subsequent coupling with PEG-bis(amine). Elemental analysis by X-ray photoelectron spectroscopy (XPS) confirmed the successful surface modification, and XPS and ellipsometry provided values for film thicknesses. XPS and ellipsometry thickness values were almost identical for PEG-silane films but differed by up to 400% for the other PEG layers, suggesting a homogeneous layer for PEG-silane but an inhomogeneous distribution for other PEG coatings on the molecularly rough ITO substrates. Atomic force microscopy (AFM) and water contact angle goniometry confirmed the different degrees of surface homogeneity of the polymer films, with PEG-silane reducing the AFM rms surface roughness by 50% and the water contact angle hysteresis by 75% compared to uncoated ITO. The ability of the PEG layers to passivate the substrate against the nonspecific adsorption of biopolymers was tested using fluorescence-labeled immunoglobulin G and DNA oligonucleotides in combination with fluorescence microscopy. The results indicate a positive relationship between film density and homogeneity on one hand and the ability to passivate against biopolymer adhesion on the other hand. The most homogeneous layers prepared with PEG-silane reduced the nonspecific adsorption of fluorescence-labeled DNA by a factor of 300 compared to uncoated ITO. In addition, the study finds that the ratio of film thicknesses derived by ellipsometry and XPS is a useful parameter to quantify the structural integrity of PEG layers on molecularly rough ITO surfaces. The findings may be applied to characterize PEG or other polymeric films on similarly coarse substrates.     

Surface modification of poly(2‐hydroxyethyl methacrylate) hydrogel for contact lens application

The present study examined poly(2‐hydroxyethyl methacrylate) (PHEMA)‐based hydrogels that have been extensively used in biomedical applications, including contact lens. In this research, we aimed to reduce adsorption of protein components from tears and bacterial deposition by surface modification of the hydrogel with different functional groups that included carboxylic acid, primary amine, and quaternary ammonium. The PHEMA was treated with a solution of sulfuric acid for partial hydrolysis of the HEMA ester groups to induce acid groups on the surface of the hydrogel. Carboxylic acid groups of the modified PHEMA were converted to primary amine and quaternary ammonium groups via carbodiimide chemistry. The surface physical and chemical properties of different samples were investigated by atomic force microscopy and X‐ray photoelectron spectroscopy, respectively. We conducted the bicinchoninic acid assay to evaluate protein deposition from artificial tear fluid on samples. Antibacterial properties of the modified hydrogels were investigated with a culture of Staphylococcus aureus, one of the major causes of eye infections. Our data showed that positively charged amine and ammonium groups efficiently resisted protein adsorption and bacterial deposition compared to alcohol and carboxylic acid groups.     

Fabrication of block copolymer monolayers by adsorption from supercritical fluids: a versatile concept for modification and functionalization of polymer surfaces

We describe a generic method for polymer surface modification and functionalization that is applicable for substrates of arbitrary shape. The method involves the deposition of monolayer and submonolayer films of photoactive block copolymers from supercritical fluids. Poly(styrene-b-tert-butyl acrylate), poly(S-b-tBA), block copolymer monolayers form spontaneously on polystyrene substrates by adsorption from scCO2 when hexane is used as a cosolvent. Atomic force microscopy indicates the films are flat and without pores after modification. Ethylene glycol contact angles increase linearly with deposition pressure until a constant value, equal to that of pure P tBA, is attained at pressures of 18 MPa or greater at 40 degrees C. This trend mimics the change in block copolymer solubility with pressure and indicates that the block copolymer self-assembles and orders at the surface, presenting a P tBA layer at the air interface with the PS block orienting toward the PS substrate. The P tBA layer thickness, determined by angle dependent X-ray photoelectron spectroscopy, reaches a saturated monolayer value of ca. 2 nm for pressures of 18 MPa and higher, consistent with the thickness expected for unperturbed PtBA chains comprising a wet brush. This concept for polymer surface modification initially produces a hydrophobic surface due to surface adsorption of the low surface tension PtBA block, but can also be used to prepare hydrophilic, functional surfaces, either modified or patterned with carboxylic acid groups, by photolytic or acid catalyzed deprotection/hydrolysis of the tert-butyl ester groups.     

Chemical changes of polymeric surfaces after modification with multi-source cluster deposition

A new process for surface modification of polymers with multi-source cluster deposition apparatus has been reported in our previous work. The apparatus simultaneously supplies reactant of ammonium sulfamate and activator of energetic Ar(+) ion. In this work chemical changes are analyzed on the basis of XPS spectra and the relations of contact angle and platelet adhesion with chemical changes are discussed. Polymer film, setting on a turning holder, was irradiated by Ar(+) ions during bombardment with ammonium sulfamate clusters. The Ar(+) ion source served for activation of polymer surface and a cluster ion source supplied ammonium sulfamate molecules to react with activated surface. After thorough washing with deionized sterile water, the modified surfaces were evaluated in terms of contact angle of water, elemental composition and binding state on XPS and platelet adhesion with platelet rich plasma (PRP). The modification of polysulfone decreased the contact angle of water on surfaces from 82.6 down to 34.5 degrees. The adhesion number of platelets were decreased to one-tenth of the original surface. Ammonium, amine, sulfate and thiophene combinations were formed on the modified surfaces. The primary studies showed successful modification of polysulfone with ammonium sulfamate by assistance of Ar(+) ion irradiation. The polar groups like N-sulfate were formed on surfaces and contribute to the decrease of surface contact angle and adhesion number of platelets. Since the same process can also be applied to other polymeric materials with various substrates, combining with the features of no solvent and no topographic changes, this method might be developed in a promising way for modification of polymers.     

Qualitative degradation of the pesticide coumaphos in solution,controlled aerosol,and solid phases on quaternary ammonium fluoride polymer brushes

With the growing demand for measurements of organophosphate (OP) pesticide use in agriculture along with the potential threat of OP‐based chemical warfare agents, there is a need for new devices or surfaces that can quickly degrade OPs into less toxic substances in a variety of environments. Using surface‐initiated atom transfer radical polymerization and post‐polymerization synthesis, we prepared a series of quaternary ammonium fluoride‐based polymer brushes designed to absorb and degrade OPs. Specifically, a polymer brush was formed using 2‐dimethylamino‐ethyl methacrylate (DMAEMA) as monomer, which, following post‐polymerization quaternization of the tertiary amine with alkylating agents and fluoride ion exchange, afforded the OP‐reactive polymer surfaces. Poly(DMAEMA) brushes were grown to thicknesses of ~100 nm on silicon wafers and glass slides and characterized by ellipsometry, atomic force microscopy, and Raman spectroscopy. Quaternization and subsequent ion exchange of the brushes were characterized by Raman spectroscopy and X‐ray photoelectron spectroscopy, respectively. The interaction of the brushes with OPs was evaluated using the OP‐based pesticide coumaphos, through the presence of the highly fluorescent degradation product chlorferon; analyzed qualitatively via fluorescence microscopy; and confirmed via nuclear magnetic resonance and mass spectrometry. We found that the fluoride form of the brush reliably degraded coumaphos deposited via controlled solution‐based applications and aerosol applications (electrohydrodynamic jetting) and from microcontact printing of the dried solid directly onto the brush. No degradation was seen for coumaphos deposited on poly(DMAEMA) or the iodide form of the quaternized brush. Copyright © 2016 John Wiley & Sons, Ltd.     

-NH- termination of the Si(111) surface by wet chemistry

For over a quarter of a century the hydrogen-terminated Si(111) single-crystalline surface has been the gold standard as a starting point for silicon surface modification chemistry. However, creating a well-defined and stable interface based on Si-N bonds has remained elusive. Despite the fact that azides, nitro compounds, and amines do lead to the formation of surface Si-N, each of these modification schemes produces additional carbon- or oxygen-containing functional groups that in turn react with the surface itself, leaving contaminants that affect the interface properties for any further modification protocols. We describe the preparation of a Si(111) surface functionalized predominantly with Si-NH-Si species based on chlorination followed by the room temperature ammonia treatment utilizing NH(3)-saturated tetrahydrofuran (THF). The obtained surface has been characterized by infrared spectroscopy and X-ray photoelectron spectroscopy. This analysis was supplemented with DFT calculations. This newly characterized surface will join the previously established H-Si(111) and Cl-Si(111) surfaces as a general starting point for the preparation of oxygen- and carbon-free interfaces, with numerous potential applications.