Novel Anion Exchangers for Electrodes with Improved Selectivity to Divalent Anions

It has been found that replacing of several long‐chain alkyl substituents at the nitrogen atom of lipophilic quaternary ammonium salts (QAS) by methyls results in a dramatic increase of the potentiometric selectivity of ion‐selective electrodes (ISE) with QAS‐based plasticized PVC membranes to some divalent anions against the monovalent ones. The discussed effect of QAS cation nature on the potentiometric selectivity is also partly retained for ISE with neutral carrier‐based membranes doped with QAS to provide anion permselectivity. This opens up new possibilities to control the potentiometric selectivity of ISE for divalent anions by the appropriate selection of the anion exchanger.     

Influence of decyl alcohol on the potentiometric behavior of three p-alkylbenzenesulfonate ion-selective electrodes

The influence of decyl alcohol on the potentiometric response of three para-alkylbenzenesulfonate (p-RBS) electrodes is analyzed. The results are clearly dependent on the membrane surface polarity due to the presence of the alcohol. The ionophore was the complex trioctylmethylammonium-p-RBS, (TOMA+)-p-RBS-, with R=H, CH3, and C2H5. The nature of the complex plays a fundamental role on the potentiometric behavior of the electrode showing that the more hydrophobic the complex, the better the potentiometric responses. Moreover, the electrodes selectivities for several hydrophilic and hydrophobic interfering anions were determined. The potentiometric results with interfering anions were coherent with the Pearson's hard and soft acid-base character of these anions.     

Hydrophobic ionic liquids in plasticized membranes of ion-selective eletctrodes

Ionic liquids with substituted imidazole, pyridine, and pyrrolidine cations and hydrophobic anions are studied as ionophores of PVC membranes of ion-selective electrodes plasticized with 2-nitrophenyloctyl ether. These membranes show a response to hydrophobic organic cations. In solutions of cationic surfactants, the slope of the electrode function is close to the theoretical one and the limit of detection does not exceed n × 10⁻⁶ M. Ion-selective electrodes for anions are developed using a trioctylmethylammonium salicylate ionic liquid. The electrode on its basis shows a stable potentiometric response to the salicylate anion in a wide range of concentrations and is characterized by good selectivity in the presence of foreign anions.     

Evaluation of Ionic Liquids Based on Amino Acid Anions for Use in Liquid‐junction Free Reference Electrodes

In this paper we report on the novel polymeric membranes for the liquid junction‐free reference electrodes. The membranes contain the ionic liquids (ILs) based on the amino acid anions, namely valine‐, leucine‐, lysine‐ and histidine‐anions, and 1‐butyl‐3‐methylimidazolium cation. Addition of the ILs, and especially of the valine‐based one, to the polymeric plasticized membranes allows significant stabilization of the electrode potential and makes it insensitive to the solution composition. A simple criterion based on the calculated lipophilicities of the cation and anion of the IL is proposed for a priori estimation of its applicability for potential stabilization. The addition of the IL as a microcomponent is found to be advantageous over plasticizing the membrane with the IL due to better potential stability, higher dissociation degree and mobility of the species. The resistance of the novel reference membranes can be tuned by addition of the lipophilic membrane electrolytes, e. g. ETH500. The applicability of the developed reference electrodes is verified in the potentiometric calibration of the indicator K⁺‐ and Ca²⁺‐selective electrodes. Implementation of the amino acid‐based ionic liquids with low environmental toxicity can make a significant contribution to the development of nature‐friendly potentiometry.     

Polymeric membrane electrodes with improved fluoride selectivity and lifetime based on Zr(IV)- and Al(III)-tetraphenylporphyrin derivatives

Novel aluminum(III)- and zirconium(IV)-tetraphenylporhyrin (TPP) derivatives are examined as fluoride-selective ionophores for preparing polymer membrane-based ion-selective electrodes (ISEs). The influence of t-butyl- or dichloro-phenyl ring substituents as well as the nature of the metal ion center (Al(III) versus Zr(IV)) on the anion complexation constants of TPP derivative ionophores are reported. The anion binding stability constants of the ionophores are characterized by the so-called “sandwich membrane” method. All of the metalloporphyrins examined form their strongest anion complexes with fluoride. The influence of plasticizer as well as the type of lipophilic ionic site additive and their amounts in the sensing membrane are discussed. It is shown that membrane electrodes formulated with the metalloporphyrin derivatives and appropriate anionic or cationic additives exhibit enhanced potentiometric response toward fluoride over all other anions tested. Since selectivity toward fluoride is enhanced in the presence of both anionic and cationic additives, the metalloporphyrins can function as either charged or neutral carriers within the organic membrane phase. In contrast to previously reported fluoride-selective polymeric membrane electrodes based on metalloporphyrins, nernstian or near-nernstian (−51.2 to −60.1 mV decade⁻¹) as well as rapid (t < 80 s) and fully reversible potentiometric fluoride responses are observed. Moreover, use of aluminum(III)-t-butyltetraphenylporphyrin as the ionophore provides fluoride sensors with prolonged (7 months) functional lifetime.     

All-solid-state reference electrodes based on conducting polymers

A novel construction of solution free (pseudo)reference electrodes, compatible with all-solid-state potentiometric indicator electrodes, has been proposed. These electrodes use conducting polymers (CP): polypyrrole (PPy) or poly(3,4-ethylenedioxythiophene) (PEDOT). Two different arrangements have been tested: solely based on CP and those where the CP phase is covered with a poly(vinyl chloride) based outer membrane of tailored composition. The former arrangement was designed to suppress or compensate cation- and anion-exchange, using mobile perchlorate ions and poly(4-styrenesulfonate) or dodecylbenzenesulfonate anions as immobilized dopants. The following systems were used: (i) polypyrrole layers doped simultaneously by two kinds of anions, both mobile and immobilized in the polymer layer; (ii) bilayers of polypyrrole with anion exchanging inner layer and cation-exchanging outer layer; (iii) polypyrrole doped by surfactant dodecylbenzenesulfonate ions, which inhibit ion exchange on the polymer/solution interface. For the above systems, recorded potentials have been found to be practically independent of electrolyte concentration. The best results, profound stability of potentials, have been obtained for poly(3,4-ethylenedioxythiophene) or polypyrrole doped by poly(4-styrenesulfonate) anions covered by a poly(vinyl chloride) based membrane, containing both anion- and cation-exchangers as well as solid potassium chloride and silver chloride with metallic silver. Differently to the cases (i)-(iii) these electrodes are much less sensitive to the influence of redox and pH interferences. This arrangement has been also characterized using electrochemical impedance spectroscopy and chronopotentiometry.     

New BF(-)(4) and ClO(-)(4)-selective membrane electrodes and their pharmaceutical applications

The construction and general performance characteristics of ion-selective membrane electrodes sensitive to BF(-)(4) and ClO(-)(4) anions, respectively, are described. All electrodes show near-Nernstian responses in the range 10(-2) -10(-5)M. The selectivity of the electrodes to a number of organic and inorganic anions are reported. The electrodes are useful in the potentiometric determination of a few pharmaceutical preparations. The method is simple, rapid and does not require prior sample pre-treatment.     

Potentiometric anion selectivity of polymer-membrane electrodes based on cobalt, chromium, and aluminum salens

Metallo-salens of cobalt(II) (Co-Sal), chromium(III) (Cr-Sal), and aluminum(III) (Al-Sal) are used as the active ionophores within plasticized poly(vinyl chloride) membranes. It is shown that central metal-ion plays a critical role in directing the ionophore selectivity. Polymer-membrane electrodes based on Co-Sal, Cr-Sal, and Al-Sal are demonstrated to exhibit enhanced responses and selectivity toward nitrite/thiocyanate, thiocyanate, and fluoride anions, respectively. The improved anion selectivity of the three ionophore systems is shown to deviate significantly from the classical Hofmeister pattern that is based only on ion lipophilicity. For example, optimized membrane electrodes for nitrite ion based on Co-Sal exhibit logK(Nitrite,Anion)(pot) values of -5.22, -4.66, -4.48, -2.5 towards bromide, perchlorate, nitrate, and iodide anions, respectively. Optimized membrane electrodes based on Co-Sal and Cr-Sal show near-Nernstian responses towards nitrite (-57.9+/-0.9 mV/decade) and thiocyanate (-56.9+/-0.8 mV/decade), respectively, with fast response and recovery times. In contrast, Al-Sal based membrane electrodes respond to fluoride ion in a super-Nernstian (-70+/-3 mV/decade) and nearly an irreversible mode. The operative response mechanism of Co-Sal, Cr-Sal, and Al-Sal membrane electrodes is examined using the effect of added ionic sites on the potentiometric response characteristics. It is demonstrated that addition of lipophilic anionic sites to membrane electrodes based on the utilized metallo-salens enhances the selectivity towards the primary ion, while addition of cationic sites resulted in Hofmeister selectivity patterns suggesting that the operative response mechanism is of the charged carrier type. Electron spin resonance (ESR) data indicates that Co(II) metal-ion center of Co-Sal ionophore undergoes oxidation to Co(III). This process leads to formation of a charged anion-carrier that is consistent with the response behavior obtained for Co-Sal based membrane electrodes.     

Effect of lipophylic salts on ise detection limit: application to calixarene-based highly efficient potassium-selective electrodes

A new interpretative model for interpolation of potentiometric data from liquid membrane ion selective electrodes has been formulated; the model allows one to achieve information about partitioning equilibria establishing at the membrane-analysed solution interface of hydrophilic cations present in the membrane as counterions of exchanger lipophylic anions. The fundamental importance of such equilibria is related to their contribution to the detection limit of the electrodes. The soundness of the proposed model was positively verified by employing it in the characterization of new K(+)-selective electrodes based on a calixarenic ionophore. Although the validity of interpolation based on our model does not significantly differ from that obtained with the simpler model providing the inclusion of a constant parameter in the logarithmic argument of Nicolski-Eisenman's equation, the information obtained resulted to be analytically suitable for optimising the membrane composition and, as a consequence, the performance of the electrodes.     

An examination of some active organometallic substances for ion-selective electrodes

Examinations of a number of possible electroactive substances for use in both liquid membrane and solid-state ion-selective electrodes were carried out. Liquid membrane electrodes incorporating organometallic salts of lead and thallium were considered as constituents of sulphate, chromate, carbonate and nitrate responsive sensors. No practically useful device was, however, found. Several electrically semiconducting metal-phthalocyanines, metal-tetracyanoethylene (TCNE) polymers and metal-coordination polymers were also synthesized and investigated with solid-state electrode constructional techniques. Metal-phthalocyanine electrodes were found to be responsive to anions rather than to cations and some anion selectivity was observed. Metal-TCNE polymer electrodes showed response to metal ions identical with those contained in the polymer, and some good selectivities, operational activity ranges and response times were found. Electrodes made from coordination polymers incorporating copper showed a limited response to copper ions whilst inclusion of cadmium and iron(III) in the polymer matrix produced an electrode with anion reponse and slight anion selectivity.     

The synthesis and membrane transport characteristics of macrocyclic polyether ligands composed of 1,10-phenanthroline as carriers for primary amine species

Four macrocyclic polyether derivatives of o-phenanthroline were synthesized and used as neutral carriers for preparing poly(vinyl chloride) (PVC) membrane electrodes to sense primary amine species. The potentiometric response characteristics of the electrodes prepared were investigated. The electrode sensitive to benzyl amine as model analyte showed a linear response range of 8.0 x 10(-6)-0.1 mol/l with a detection limit of 8.9 x 10(-7) mol/l and a slope of 56.5 mV/decade. The linear potentiometric response of the mexiletine-sensitive electrode was 4.7 x 10(-6)-0.1 mol/l, and the detection limit was 5.0 x 10(-7)1 mol/l with a slope of 59.0 mV/decade. The transfer behavior of amines and ammonium ions through an organic phase was investigated by means of the bulk liquid membrane transport experiment. The effects of pH, counter anions and other factors on the transfer of the amine and ammonium species were studied. The mass transfer rates of the test species facilitated by macrocyclic polyether derivatives of o-phenanthroline were determined and the following sequence was found: benzyl amine > ethyl amine > tetramethyl ammonium > triethyl amine > diethyl amine > K(+) > ammonium > Na(+) > Ca(2+) > Mg(2+). This was exactly the potentiometric selectivity sequence of the membrane electrodes prepared by using these carriers. The mechanism of transfer of benzyl amine through a membrane phase induced by the carriers has been elucidated on the basis of experimental observations.     

流动载体膜阴离子选择电极电位选择性系数规律的探讨

离子选择电极的电位选择性系数K_ij^Pot是衡量电极性能的重要参数。电位选择性系数规律已经有过讨论^[1-3]。本文将对流动载体膜阴离子选择电极电位选择性系数与阴离子结构参数(z/r²)_j的关系进行讨论。     

Coated wire ion-selective electrode for palladium(II) and its application to catalyst analysis

The construction, performance and application of polymeric membrane (PME) and coated wire (CWE) palladium(II)-selective electrodes based on the ion pair between tetra bromopalladate(II) and hexadecylpyridinium cation (HDP⁺) in a poly(vinyl chloride) matrix, plasticized with o-NPOE are described. The influence of membrane composition, bromide ion concentration and pH on the potentiometric responses of electrodes were investigated. Nernstian responses were obtained for the two type of electrodes with low limits of detection (1.0×10⁻⁶ M for PME and 5.0×10⁻⁸ M for CWE). The potentiometric responses are independent of the pH of test solution in the range 3–8. The response time of electrodes are fast (30 s for PME and 10 s for CWE), and they can be used for at least 3 months without any considerable divergence in potentials. The proposed electrodes revealed good selectivity for palladium(II) respect to different cations and anions. They were used to the direct potentiometric determination of palladium(II) in silicon-alumina catalysts.     

Liquid membrane electrodes for the selective determination of nicotine in cigarette smoke

Five liquid membrane electrode systems responsive to the nicotinium cation are described. These electrodes are based on the use of the ion-association complexes of the nicotinium cation with tetraphenylborate, 5-nitrobarbiturate, flavianate, reineckate and picrolonate counter anions in nitrobenzene solvent as ion-exchange sites. The performance characteristics of these electrodes, evaluated according to IUPAC recommendations, reveal fast, stable and near-Nernstian responses for 10(-2)-10(-5) M nicotine over the pH range 3.5-7. Many inorganic and organic cations do not interfere. The direct potentiometric determination of 3 micrograms ml-1-1.6 mg ml-1 of nicotine in aqueous solutions showed an an average recovery of 99.5% and a mean standard deviation of 1.2%. The electrodes were also used for monitoring the titration of nicotine with sodium tetraphenylborate, measuring the pK of nicotine and determining nicotine in the smoke from different cigarettes. The results compare favourably with those obtained by the standard gas chromatographic method.     

Phosphate‐Binding Characteristics and Selectivity Studies of Bifunctional Organotin Carriers

The selective recognition of the orthophosphate anion by a series of bifunctional Lewis acidic organotin compounds is investigated. The binding affinity of these carriers to anions, as measured by NMR titrations in CH₂Cl₂ obeyed the potentiometric selectivity order phosphate > sulfate > perchlorate, and provided the corresponding complex‐formation constants. More accurate calculations of these values were obtained by the segmented‐sandwich‐membrane method performed directly inside the liquid polymeric membrane. These carriers were also studied potentiometrically in polymeric liquid membranes. The results indicate that (PhBr₂Sn)₂CH₂ is 2 to 5 orders of magnitude more selective towards phosphate over other oxoanions. These results set the ground for the development of a new series of highly selective anions carriers with a wide range of possible applications.     

Automated determination of detection limits and selectivity coefficients of ion-selective electrodes by using a microcomputer-controlled potentiometric system

The detection limit and the potentiometric selectivity coefficients of ion-selective electrodes are determined automatically with a microcomputer-controlled potentiometric system. Measurements of these parameters for three commercially available electrodes of the liquid membrane type (chloride, nitrate and calcium electrodes) gave results in good agreement with those reported in the literature. The non-linear least-squares fit evaluation of data (potential activities) and the selection of the appropriate transfer functions are described. The reproducibility of the results is discussed.     

Nitron tetrachloroaurate(III) electrodes with poly(vinyl chloride) and liquid membranes for the selective determination of gold

PVC matrix and liquid membrane electrodes have been developed for direct potentiometric determination of gold(III). The membranes incorporate nitron tetrachloroaurate(III) as electroactive material. Fast response for gold(III) over the concentration range 10(-5)-0.1M, with response slopes of 52.8-55.2 mV/decade is obtained. The electrodes show good selectivity for gold(III) at pH 2-5 in the presence of many anions and cations. The PVC membrane electrode offers the advantages of greater selectivity (except for Cr(3+), Mn(2+) and ClO(-)(4)) and higher thermal stability. The liquid membrane electrode gives a higher response slope and faster time of response than the PVC membrane electrode. Determination of AuCl(-)(4) over the range 2 mug/ml-2 mg/ml shows an average recovery of 98.5% and a mean standard deviation of 1.0%. Determination of gold in some gold alloys (58.3-99.9% Au) and pharmaceutical preparations gave an average recovery of 99.4% and a mean standard deviation of 0.7%, which are comparable with the performance obtained with the spectrophotometric Malachite Green and gravimetric U.S. Pharmacopeia methods.     

Ion-selective electrode for the determination of dimethylbenzylammonium ions

A sensor is proposed for the direct potentiometric determination of dimethylbenzylammonium in acid and neutral aqueous solutions. The sensor membrane is made of a polymeric composition on the basis of polyvinylchloride containing an ion associate and a solvent as a plasticizer. Salts of the tetraphenylborate anion and its derivatives served as ionophores. Basic electroanalytical parameters of the developed potentiometric sensors are studied and the pH range of their possible application is determined. The developed sensor is used as a reference electrode in the potentiometric titration of dimethylbenzylammonium with tetraphenylborate anions.     

Construction and assessment of some perchlorate-selective liquid membrane electrodes

Perchlorate-selective liquid membrane electrodes were developed by incorporating the ion-pair complexes of perchlorate with brucine, cinchonidine, emetine and benzyldimethyltetradecylammonium chloride (zephiramine) in nitrobenzene. The electrodes, which respond to perchlorate ion over the concentration range 1.0–5.0 × 10^?4 M ClO^?₄, have a fast response and wide pH range. The zephiramine-perchlorate electrode was the best in terms of its fast response, wide pH range and high reproducibility of potentials. Most common inorganic and organic anions, except permanganate, do not cause significant interference. Electrodes based on brucine-, emetine- and zephiramine-perchlorate were successfully employed for the direct potentiometric determination of perchlorate in the presence of halides, sulphate, nitrate and chlorate. The cinchonidine-perchlorate electrode showed comparatively poor selectivity.     

Nitrogenous synergists induced potentiometric response to metal ions with polymeric liquid membranes containing thenoyltrifluoroacetone as an ionophore.

The effects of nitrogenous synergists on the potentiometric responses to divalent transition metal ions were investigated concerning polymeric liquid membranes containing thenoyltrifluoroacetone (Htta) as an ionophore. The tested synergists were pyridine (py) and 4,4'-dioctyl-2,2'-bipyridyl (C8bpy). The potentiometric responses to metal ions, such as Cd2+, Co2+, Ni2+ and Zn2+, were induced by adding the synergists into the liquid membrane systems. The coexistence of Htta and a synergist was necessary for generating the membrane potential. The tta- anion adsorbed at the liquid membrane/solution interface and the complex formation between the synergist and a given metal ion appeared to participate in preferential uptake of metal ions.