Swelling equilibria and dye adsorption studies of chemically crosslinked superabsorbent acrylamide/maleic acid hydrogels

Superswelling acrylamide (AAm)/maleic acid (MA) hydrogels were prepared by free radical polymerization in aqueous solution of AAm with MA as comonomer with some multifunctional crosslinkers such as trimethylolpropane triacrylate and 1,4-butanediol dimethacrylate. AAm/MA hydrogels were used in experiments on swelling and adsorption of a water-soluble monovalent cationic dye such as Basic Blue 17 (Toluidin Blue). As a result of dynamic swelling tests, the influence of relative content of MA on the swelling properties of the hydrogel systems was examined. AAm/MA hydrogels were swollen in the range 1660-6050% in water, while AAm hydrogels swelled in the range 780-1360%. Equilibrium water content of AAm/MA hydrogels were calculated in the range 0.8873-0.9837. Water intake of hydrogels followed a non-Fickian type diffusion. The uptake of the cationic dye, BB-17 to AAm/MA hydrogels is studied by batch adsorption technique at 25 °C. In the experiments of the adsorption equilibrium, S-type adsorption in Giles's classification system was found. The binding ratio of hydrogel/dye systems was gradually increased with the increase of MA content in the AAm/MA hydrogels.     

pH/temperature - sensitive imprinted ionic poly(N-tert-butylacrylamide-co-acrylamide/maleic acid) hydrogels for bovine serum albumin

In this study, we have prepared pH/temperature-sensitive imprinted ionic poly(N-tert-butylacrylamide-co-acrylamide/maleic acid) [P(TBA-co-AAm/MA)] hydrogels for bovine serum albumin (BSA) by using molecular imprinting method. BSA adsorption from aqueous BSA solutions was investigated with two types of hydrogel systems prepared by non-imprinted and imprinted methods. Hydrogels imprinted with BSA showed higher adsorption capacity and specificity for BSA than hydrogels prepared by the usual procedure. At all studied conditions, the highest BSA adsorption was observed in the hydrogel imprinted with 8.63 wt.-% BSA. In addition, the imprinted hydrogels exhibited both for good selectivity BSA and high adsorption rate depending on the number of BSA-sized cavities. Adsorption studies showed that other stimuli, such as pH, temperature and initial BSA concentration also influenced the BSA adsorption capacity of both non-imprinted and imprinted hydrogels.     

Cationic dye adsorption by acrylamide/itaconic acid hydrogels in aqueous solutions

Acrylamide/itaconic acid (AAm/IA) hydrogels containing different quantities of itaconic acid have been irradiated with γ radiation. The hydrogels were used in an experiment concerning the adsorption of cationic dyes such as Basic Blue 9, Basic Violet 1 and Basic Blue 12. In the experiments of the adsorption of dyes from their synthetic aqueous solutions, type S adsorption isotherms were found. One mole of monomeric unit of AAm/IA hydrogels adsorbed 78.5–513.1 μmole of Basic Blue 9, 60.2–641.1 μmole of Basic Violet 1 and, 28.8–593.3 μmole of Basic Blue 12, while acrylamide hydrogel did not adsorb any cationic dye. As a result, it was shown that the AAm/IA hydrogels could be used as an adsorbent for water pollutants such as dyes, and immobilization of these organic contaminants in the hydrogels from waste water can solve one of the most important environmental problems of the textile industry. © 1997 John Wiley & Sons, Ltd.     

The effect of external stimuli on the Bovine Serum Albumin adsorption capacity of poly(acrylamide/maleic acid) hydrogels prepared by gamma rays

The effects of external stimuli such as pH of the buffer solution, ionic strength, temperature and the amount of poly-electrolyte monomer in the hydrogel system on the Bovine Serum Albumin (BSA) adsorption capacity of poly(acrylamide/maleic acid) [P(AAm/MA)] hydrogels were investigated. Poly-electrolyte P(AAm/MA) hydrogels with varying compositions were prepared by irradiating acrylamide/maleic acid/water mixtures with γ rays at ambient temperature. Langmuir type adsorption isotherms were observed for all prepared hydrogels. Increase of ionic strength of the buffer solution from 0.01 to 0.1 mol dm⁻³ decreased the adsorption capacity of hydrogels and zero adsorption was observed in the presence of 0.1 mol dm⁻³ Na⁺ and Ca²⁺ ion in the adsorption medium. The adsorption capacity of hydrogels was found to increase from 0 to 120 mg BSA/g dry gel, by changing external stimuli and hydrogel composition.     

Swelling studies of copolymeric acrylamide/crotonic acid hydrogels as carriers for agricultural uses

In this study, highly swollen acrylamide/crotonic acid hydrogels (in a rod form) containing some inorganic salts such as ammonium nitrate, potassium nitrate and ammonium sulphate used as fertilizer, an agricultural drug such as Dalapon (sodium 2,2‐dichloropropionate) and two crosslinkers such as ethylene glycol dimethacrylate and 1,4‐butandiol dimethacrylate were prepared by copolymerization of acrylamide and crotonic acid with γ‐radiation. As a result of swelling tests, the influence of γ‐ray dose and relative content of crotonic acid on the swelling properties, the diffusional behavior of water, diffusion coefficients and network properties of the hydrogel systems were examined. Acrylamide/crotonic acid hydrogels containing these salts and agricultural drug were swollen in the range 2045–400% in water, while polyacrylamide hydrogels swelled in the range 660–700%. Water intake of hydrogels followed a nonFickian‐type diffusion. Copyright © 2000 John Wiley & Sons, Ltd.     

Characterization of structured acrylamide/acrylic acid hydrogels by TMDSC and microscopy

The thermal behavior of hydrogels synthesized by solution polymerization between acrylamide, acrylic acid and diglycidyl acrylate (DGA) as a crosslinking agent was investigated. The structure of the hydrogel can be tightly controlled with the reaction temperature. This method produces a new type of hydrogels, which exhibit well defined structures at various scales of length simultaneously. These multi-structured hydrogels are hydrophilic, elastic, water insoluble, and soft polymers with an anisotropic optical response. The structure was observed by scanning electron microscopy (SEM), polarized light microscopy (PLM) and macroscopic visualization (CCD camera). In addition, structural transitions in the hydrogels were monitored by temperature modulated differential scanning calorimetry (TMDSC). Severe heating tests in an adiabatic oven were performed to analyze decomposition of the material. Fourier transform infrared (FTIR) spectroscopy was used to qualitatively analyze the hydrogels samples exposed to a sudden thermal treatment.     

Influence of some amino acids on the dynamic swelling behavior of radiation-induced acrylamide hydrogel

The influence of some amino acids—alanine, glycine, valine, glutamine, histidine, phenylalanine, and tryptophan—on the swelling behavior of acrylamide (AAm) hydrogel prepared by γ-radiation was investigated. Swelling experiments of AAm hydrogel were made in the universal buffer solutions and the amino acid solutions at certain pHs at 37°C. These selected pH values were pK₁, pK₂ and isoelectric point (pI) values such as ionization of α-carboxyl groups, ionization of α-amino groups, and the pIs of the amino acids, respectively. The swelling of AAm hydrogel increased when pH values of solutions were increased. The value of equilibrium swelling of AAm hydrogel in the solution of universal buffer was 880% at pH 10.0, whereas it was 670% at pH 2.0. The values of equilibrium swelling of AAm hydrogel in amino acid solutions were between 830 and 965% at pH 10.0, whereas they were between 635 and 775% at pH 2.0. The rate constant of swelling, initial swelling rate, theoretical maximum swelling, diffusional exponent, network parameter, and diffusion coefficient were calculated by swelling kinetics. Diffusions of the amino acid solutions into the hydrogel were generally found as non-Fickian in character. The diffusion coefficients of the hydrogel were between 0.91 × 10⁻⁶ and 2.41 × 10⁻⁶ cm²/s.     

Diffusion of dextran within poly(methacrylic acid) hydrogels

We describe an investigation of fluorescence correlation spectroscopy into the diffusion of fluorescein‐tagged dextran (FDEX) in a poly(methacrylic acid) (PMAA) hydrogel. The temperature dependence of FDEX diffusion is shown to follow Zimm behavior in pure water, and the decrease in the diffusion coefficient when in the PMAA hydrogel has been modeled. The addition of acid and alkali (HCl and NaOH, respectively) not only control the swelling and collapse of the hydrogel but also reveal a strong pH dependence of the dextran diffusion coefficient, which shows a (nonmonatonic) increase with pH. The addition of NaCl and CaCl₂ salts similarly showed evidence of network swelling, most notably at low salt concentration, but also that the diffusion coefficient within the gel at these low concentrations is larger than that in the equivalent solution without the hydrogel, indicating that the combination of hydrogel and salt works to increase the diffusion coefficient above that in pure water. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Aqueous Redox Polymerization of Acrylamide Initiated by Lactic Acid/Permanganate

Acrylamide was polymerized in aqueous solution at 35 ± 0.2°C with the redox pair potassium permanganate/lactic acid. The kinetics of polymerization was followed iodometrically. The effect of monomer, potassium permanganate, and lactic acid concentration and temperature on the rate of polymerization was studied. The dependence of the number-average degree of polymerization on the initial rate of polymerization and temperature was also determined.     

Radiation synthesis and uranyl‐ion adsorption of poly(2‐hydroxyethyl methacrylate/maleic acid) hydrogels

A new kind of copolymeric hydrogel adsorbent containing hydrophilic groups that both provides swelling in water and chelates with uranyl ions was synthesized, and its adsorptive ability for recovering uranium from aqueous media was investigated. The uranyl adsorption capacities of poly(2‐hydroxyethyl methacrylate/maleic acid) hydrogels were determined with a polarographic technique to be 3.2–4.8 (mg UO/g dry gel) from a 15‐ppm uranyl nitrate solution at pH, 6 depending on the molar content of maleic acid in the hydrogel. Adsorption studies showed that other stimuli, the temperature, and the ionic strength of the solution also have important roles in the uranyl‐ion adsorption capacity of these hydrogels. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 277–283, 2001     

Synthesis and characterization of acrylamide/acrylic acid hydrogels crosslinked using a novel diacrylate of glycerol to produce multistructured materials

In this work we propose a new crosslinking agent and the method to use it for the synthesis of acrylate based hydrogels. The use of this diacrylate of glycerol, synthesized in our laboratory, allows the generation of materials with well defined micro‐structures in the dry state, unique meso‐ and macro‐structures during swelling, and enhanced mechanical properties and swelling capacity in water. These properties depend on the crosslinking agent concentration, as well as synthesis thermal history. Poly(acrylamide‐co‐acrylic acid) hydrogels are commonly crosslinked with N, N′‐methylenebisacrylamide or N‐isopropylacrylamide. Here we obtain and use a new crosslinking agent, obtained from the reaction between glycerol and acrylic acid to produce a Diacrylate of glycerol (DAG). Two synthesis methods at equivalent molar ratio of acrylamide/acrylic acid (AM/AA) were analyzed. The mechanical properties, the swelling capacity, and the morphology at microscale of these hydrogels showed a well defined transition at a critical concentration of crosslinking agent. DAG induces the generation of hydrogels with hierarchichal structure. The micro‐structure surface morphology was investigated by scanning electron microscopy, the meso‐structure by polarized light microscopy and the macro‐structure by CCD imaging. The hydrogels with hierarchical structures showed improved mechanical properties when compared with structureless hydrogels. Control of the microstructure allows the generation of materials for different applications, i.e. templates or smart materials that interact with electromagnetic radiation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2667–2679, 2008     

Swelling characterization of novel ternary semi‐IPNs: acrylamide/1‐vinylimidazole/PEG hydrogels

New ternary semi interpenetrating polymer networks (semi‐IPNs) systems containing acrylamide (AAm), 1‐vinylimidazole (VI) and poly (ethylene glycol) (PEG) have been prepared. AAm/VI hydrogels and semi‐IPN's, poly (AAm/VI/PEG) with 0.25, 0.50, 0.75 and 1.00 g of PEG (per 1.00 g AAm) were prepared by free radical solution polymerization in aqueous solution of AAm with VI as comonomer and a multifunctional crosslinker such as 1,4 butanediol dimethacrylate (BDMA). Swelling experiments were performed in water at 25°C, gravimetrically. The influence of VI and PEG content in hydrogels were examined. AAm/VI and AAm/VI/PEG hydrogels showed large extents of swelling in aqueous media, the swelling being highly dependent on the chemical composition of the hydrogels. Percentage swelling ratio of AAm/VI hydrogels and AAm/VI/PEG hydrogels was shown as 650–4167%. The values of equilibrium water content (EWC) of the hydrogels are between 0.8990 and 0.9750. Diffusion behavior was investigated. Water diffusion into hydrogels was found to be non‐Fickian in character. Copyright © 2007 John Wiley & Sons, Ltd.     

In vitro swelling studies in simulated physiological solutions and biocompatibility of NIPAM-based hydrogels with some biochemical parameters of human sera

In modern medicine, commonly used biomaterials originating from metals, ceramics and polymers have shown biocompatibility with blood, tissues, cells, etc., in the human body. Polymeric biomaterials are usually understood as polymeric materials and articles made from them which are used in medicine, biotechnology biomedicine, bioengineering, pharmaceutical, veterinary, food industry, agriculture and related fields. In this in vitro study, swellings and the biocompatibility of environmentally sensitive N-isopropyl acrylamide-based (ES) hydrogels such as N-isopropyl acrylamide/acrylamide (ES/0), and N-isopropyl acrylamide/acrylamide/ carboxylic acids (ES/XAc) prepared by free radical polymerization in aqueous solutions has been investigated. Selected carboxylic acids for this study were acrylic, methacrylic, crotonic, itaconic, maleic, mesaconic and aconitic acid. The equilibrium swelling of the hydrogels are investigated in simulated physiological fluids or crystalloid solutions such as HCl-KCl buffer (pH = 1.1), universal buffer (pH = 5.5), phosphate buffer (pH = 7.4), urea, isotonic NaCl, isotonic KCl, 5% dextrose, 5% dextrose+isotonic NaCl, Ringer's lactate, human blood serum and human serum albumin solution at 37°C. For the analysis of biocompatibility, ES hydrogels are incubated in 5 different human sera and their biocompatibilities with some biochemical parameters have been investigated for 24 h at 37°C. No significant differences in values before and after the test procedures have been found. It is therefore concluded that environmentally sensitive N-isopropyl acrylamide-based hydrogels are biocompatible for biochemical parameters of human sera.     

温敏水凝胶溶胀行为及其分离性能

以甲基丙烯酸钠(SM)为单体与异丙基丙烯酰胺(NPA)共聚,N,N-亚甲基双丙烯酰胺(MBA)为交联剂,得到阴离子型温敏水凝胶;对其热敏性能、溶胀性能及它对甘草酸的分离性能进行了研究,并通过凝胶中水的状态理论对结果进行了分析和解释,还研究了阴离子浓度的变化对上述性能的影响。将其用于甘草酸粗品的分离吸收,探讨它用于分离中草药有效成分的可能性。     

高效液相色谱法分离和测定酒石酸和马来酸

１引言 酒石酸（２,３一二羟基丁二酸）和马来酸（顺丁烯二酸）都是重要的有机化工原料,它们被广泛地应用于有机合成和其它化工生产领域［１］． 酒石酸的制备常用钨酸作为催化剂,由马来酸识水溶液与过氧化氢进行环氧化反应再经水解精制而成,其中常含有微量的没有反应的马来酸,因此,建立有效的分离和测定酒石酸和马来酸的方法,对于酒石酸生产条件的选择与控制,以及产品的质量检测等都有十分重要的意义． 目前尚未发现有关同时分离和测定酒石酸和马来酸的文献报道．我们首次采用反相高效液相色谱法,跟踪监测了酒石酸生产过程中的物…     

Preparation and characterization of biodegradable gelatin-PAAm-based IPN hydrogels for controlled release of maleic acid to improve the solubility of phosphate fertilizers

In this study, interpenetrating polymer network (IPN) hydrogel systems including maleic acid (MA) were constituted to improve the solubility of phosphate fertilizers. A series of full and semi-IPN hydrogels were prepared from various gelatin/polyacrylamide mixtures by using two different cross-linkers. The effects of polymer composition on the morphological structures and swelling behaviors of the hydrogels were investigated. The swelling values of all hydrogels were found to be in between 435% and 830%. MA release from load0ed hydrogels was followed and it was determined that MA-loaded hydrogels efficiently decreased pH and improved the solubility of Ca₃(PO₄)₂ in releasing medium.     

液相色谱-串联质谱法测定淀粉及其制品中的顺丁烯二酸与顺丁烯二酸酐总含量

建立了测定淀粉及其制品中顺丁烯二酸和顺丁烯二酸酐总含量的高效液相色谱-串联质谱（HPLC-MS/MS）方法。样品经50%（v/v）甲醇提取、碱性条件下水解后,采用液相色谱-串联质谱对其进行分析,外标法定量。质谱分析采用电喷雾电离,负离子扫描,多反应监测模式。实验表明样品无明显的基质效应,添加水平为0.5~1000 mg/kg时,回收率为80.2%~115.3%,相对标准偏差（n=6）小于12%;方法检出限（LOD）为0.1 mg/kg,定量限（LOQ）为0.5 mg/kg。该方法提取效果好,具有良好的灵敏度、回收率和重复性,已被成功用于实际样品中顺丁烯二酸和顺丁烯二酸酐总含量的测定。     

Macroporous Poly(Acrylamide) Hydrogels: Swelling and Shrinking Behaviors

Macroporous poly(acrylamide) hydrogels have been synthesized by using poly(ethylene glycol) (PEG) with three different molecular weights as the pore‐forming agent. Scanning electron microscope graphs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights of PEG during the polymerization reaction. The swelling ratios of the PEG‐modified hydrogels were much higher than those for the same type of hydrogel prepared via conventional method. However, the swelling/deswelling ratios of the PEG‐modified hydrogels were affected slightly by the change in the amount of the PEG. Scanning electron microscopy experiments, together with swelling ratio studies, reveal that the PEG‐modified hydrogels are characterized by an open structure with more pores and higher swelling ratio, but lower mechanical strength, compared the conventional hydrogel. PAAm has potential applications in controlled release of macromolecular active agents.     

Acrylamide Hydrogels Preparation via Free Radical Crosslinking Copolymerization: Kinetic Study and Morphological Investigation

The simultaneous gravimetric and dilatometric techniques have been used to study the kinetics of aqueous free radical crosslinking copolymerization of acrylamide (AAm) and N,N^'-methylenebisacrylamide (MBA) at different crosslinker ratios, and reaction temperatures. In this study, the gel properties were investigated using swelling measurements and microscopic techniques. Based on the data, it was proposed that the deviation point of the results of dilatometric technique from those of the gravimetric one can be a new criterion for gel point. The monomer conversion and the equilibrium swelling ratio of the hydrogels were measured as a function of the reaction time. Experimental data showed an inverse dependence of the critical gel point on crosslinker concentration. As the MBA/AAm ratio was decreased to 0.1?wt%, the product appearance changed. In addition, the effects of temperature on the reaction rate and critical gel point were studied. At higher temperatures, the equilibrium swelling ratio reached to its minimum value earlier. Besides, the hydrogel surface became smoother.