The effects of hydrogen bonding on the liquid crystalline behavior of semiflexible poly(urethaneester)s

The peculiar liquid crystalline behavior of two poly(urethane-ester)s TDI-C6C4 and TDI-C6C8 is reported. Evidence is provided of the formation of two nematic mesophases, a cybotactic nematic and a conventional nematic mesophase, in TDI-C6C8 and of one cybotactic nematic mesophase in TDI-C6C4. IR spectroscopy indicates that different hydrogen bonded and non-bonded structures occur with varying temperature. The transition from the nematic cybotactic mesophase to the nematic mesophase, or to the isotropic phase, is accompanied by a substantial decrease of the strength of the hydrogen bonds. This is also reflected in the dynamic-mechanical behavior of these poly(urethane-ester)s which is similar to the one of slightly crosslinked thermoreversible networks.     

Rheological evidence for the existence of subphases in the liquid crystalline 4-n-alkoxybenzoic acids

The rheological behaviour of the homologous series, the alkyloxybenzoic acids, has been studied at steady flow and small amplitude oscillatory shear. The temperature dependencies of the viscosity were compared with differential scanning calorimetry data in order to estimate pretransitional phenomena in mesophases. The values of the viscosity and flow activation energy (E) can be indicative of the mesophase state. 4-n-pentyloxybenzoic acid yields a classic nematic (N) phase while the next homologues show a cybotactic nematic phase having a higher E value. The N phase is a Newtonian fluid of lower viscosity than that of the isotropic phase. The cybotactic nematic phase by its rheological properties takes an intermediate position between the N phase and a smectic C (SmC) phase. The SmC phase is a viscoelastic and viscoplastic medium. The SmC phase of 4-n-octyloxy-, 4-n-nonyloxy-, 4-n-decyloxy- and 4-n-dodecyloxybenzoic acid can exist in high- and low-ordered states. The more ordered smectic phase is characterised by higher stiffness, viscosity and yield stress than those of the less ordered. The SmC phase of 4-n-hexadecyloxybenzoic acid is characterised by the only state with unstable value of apparent viscosity. The phase state and the transition temperature can be dependent on the thermal history of the sample and a mechanical shear.     

Studies on the modification of poly(ω‐bromoalkyl‐1‐glycidylether)s with 4′‐methoxybiphenyl‐4‐oxy mesogenic groups

A series of poly[ω‐(4′‐methoxy‐biphenyl‐4‐oxy)alkyl‐1‐glycidylether]s were synthesized by chemically modifying the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐hydroxy‐4′‐methoxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yields and almost quantitative degrees of modification. They were all insoluble in THF and other common solvents. Characterization by ¹³C NMR confirmed that all the polymers had the expected structure. The liquid crystalline behavior of the polymers was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction studies. Polymers that had alkyl spacers with n = 2 and 4 were smectic C, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C again. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5998–6006, 2005     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Preparation and properties of laterally multifluorinated benzoxazole-based nematic mesogens

Series of laterally multifluorinated heterocyclic compounds, 2-(2?,3-difluoro-4?-alkoxy-1,1?-biphenyl-4-yl)-benzoxazole derivatives (nPF(2)PF(3)Bx), are prepared and characterised. They mainly display enantiotropic nematic mesophases with wider mesophase ranges of 12–107°C (heating process) and 22–134°C (cooling process) than the corresponding analogues. The enhanced nematic mesophase stability is achieved via slightly increasing inter-ring twist angle with inter-ring lateral fluorine substitute in biphenyl unit, as well as through improving the molecular polarity with multifluorine substitutes. Meanwhile, two inter-ring lateral fluorine atoms lead to a decrease in melting/clearing points and a wide nematic mesophase range, which makes it possible for heterocyclic mesogens nPF(2)PF(3)Bx to use in nematic liquid crystal display mixtures.     

Synthesis and characterization of side-chain liquid crystalline polysiloxanes containing 4-alkanyloxyphenyl trans-4-alkylcyclohexanoate side groups

The synthesis and characterization of nine polysiloxanes containing 4-alkanyloxyphenyl trans-4-alkylcyclohexane side groups are described. Six monomers which contain a pentenyloxy of a hexenyloxy flexible spacer display a nematic mesophase, while the other three monomers which contain an undecenyloxy flexible spacer display nematic, smetic A and smectic E mesophases. All synthesized polymers present two smectic mesophases except one containing 4-hexanyloxyphenyl trans-4-n-butylcyclohexanoate side groups presents one smectic mesophase and one containing 4-undecanyloxyphenyl trans-4-n-pentylcyclohexanoate side groups presents three smectic mesophases. Trans-cis isomerization of mesogens and side chain crystallization did not occur for any of the synthesized polymers.     

Effect of terminal perfluorocarbon chain containing mesogens on phase behaviors of chiral comb-like liquid crystalline polymers

A novel perfluorinated liquid crystal 4′-(2,2,3,3,4,4,5,5,6,6,7,7,8,8,8-pentadecafluorooctanoyloxy)biphenyl-4-yl undec-10-enoate (PFOBU) was synthesized, which exhibited smectic C phase. Several liquid crystalline polymers (PI–PVI) were synthesized by use of poly(methylhydrogeno)siloxane, PFOBU, and cholesteryl 3-(4-allyloxy-phenyl)-acryloate. The chemical structures and liquid crystalline (LC) properties of the monomers and polymers, and some ferroelectric properties of the chiral smectic C (S_C^*) phase were characterized by use of various experimental techniques. The effect of perfluorocarbon chains on phase behaviors of the fluorinated LC polysiloxanes was studied as well. PI and PII showed single chiral nematic (N^*) mesophase when they were heated and cooled, but PIII, PIV, PV, and PVI containing more perfluorocarbon chain units exhibited S_C^* phase besides N^* mesophase. Introduction of perfluorocarbon chain containing mesogens to the chiral cholesteryl-containing polymer systems resulted in a S_C^* mesophases, indicating that the fluorophobic effect could lead to microphase segregation and modifications of smectic mesophases from the chiral nematic phase.     

Dendrimers with laterally grafted mesogens

Nematic liquid crystalline phases have been obtained by attaching mesogenic units in a lateral manner to the periphery of dendrimer generations 1, 2, 3, 4 and 5 of poly(propyleneimine). Powder XRD studies of the compounds have been performed in order to confirm the natures of the mesophases. Patterns obtained from oriented samples show a nematic phase in which the molecules are preferentially aligned in the stretching direction and also indicate the presence of local smectic C fluctuations. All compounds display an additional low temperature mesophase. Careful study of the XRD patterns of these low temperature phases has led to their assignment as a modulated Sm[Ctilde] -tilde mesophase.     

Nematic mesophase enhanced via lateral monofluorine substitution on benzoxazole-liquid crystals

Fluorine is widely used as a lateral substituent to modify the physical properties of liquid crystals. Here, laterally monofluorinated compounds, 2-(4?-alkoxy-2-fluorobiphenyl-4-yl)-benzoxazole derivatives (nPPF(2)Bx) bearing different substituents (H, CH₃, NO₂, coded as nPPF(2)BH, nPPF(2)BM and nPPF(2)BN, respectively) at 5-position, were synthesised and characterised. It is interesting to note that these only display enantiotropic nematic mesophases with mesophase ranges of 12–28°C and 13–45°C on heating and cooling for nPPF(2)BH, 46–97°C and 62–120°C for nPPF(2)BM and 82–108°C and 87–113°C for nPPF(2)BN, which are very different from the corresponding monofluorine-substituted analogue (compounds I) with enantiotropic smectic or smectic/nematic mesophases. The enhanced nematic mesophase is attributed to the reduced π–π interaction/conjugation resulting from the twisted structure of the molecule caused by the introduction of a fluorine atom into the inter-ring of the biphenyl unit. These results suggest that modification of the monofluorine substituent position is an effective method to improve the nematic mesophase in benzoxazole-liquid crystals.     

Mesophase behaviour of azobenzene-based angular supramolecular hydrogen-bonded liquid crystals

New types of angular 1:1 hydrogen-bonded supramolecular complexes via hydrogen-bond formation between 4-alkoxyphenylazo benzoic acids (In) and 4-(3?-pyridylazo)-4??-alkoxybenzoates (IIm) with various alkoxy chains (from 6 to 16 carbons) were prepared and investigated for their mesophase behaviour by differential scanning calorimetry (DSC) and polarised-light microscopy (PLM). All prepared homologues were found to be dimorphic, possessing smectic C and nematic mesophases. The formation of 1:1 hydrogen-bonded supramolecular liquid crystals (LCs) complexes was confirmed by FTIR and UV?visible (UV?vis) absorption spectroscopy. The study revealed that nematic transition enhancement (ΔT) decreases with the increase of the alkoxy chain length on the base complement, while it increases with the increase of the chain attached to the acid complement of the complex, that is the stability of the nematic phase is more dependent on the length of the acid component.     

Synthesis of two naphthyl-containing homologous series of mesogenic ligands and the related metallomesogens containing Cu(II)

Two new naphthyl-containing homologous series of mesogenic ligands, the 4-n-alkoxy-2-hydroxybenzylidene-2'-naphthylamines (series I) and 4(4'-n-alkoxybenzoyloxy)-2-hydroxybenzylidene-2'-naphthylamines (series II), as well as the related metallomesogens of higher homologues containing a Cu(II) atom, have been synthesized. All the ligands and complexes were characterized by a combination of elemental analysis and standard spectroscopic methods. In series I, n-heptyloxy and n-octyloxy derivatives are non-mesogenic whereas the remaining higher members synthesized exhibit a monotropic nematic mesophase. In series II, all the members synthesized exhibit an enantiotropic nematic mesophase. All the metallomesogens of series I synthesized exhibit a monotropic smectic A mesophase, except for the n-octyloxy derivative, which is non-mesogenic, whereas metallomesogens of series II exhibit enantiotropic nematic mesophases up to the n-tetradecyloxy derivatives; the n-tetradecyloxy and n-hexadecyloxy derivatives also exhibit smectic C mesophases. All the members of series II and their metallomesogens exhibit mesophases with wide temperature ranges and greater thermal stability as compared to series I and their metallomesogens, respectively. The mesomorphic properties of both the present series and their metallomesogens are compared with each other and with other structurally related series to evaluate the effect of the naphthalene moiety on mesomorphism.     

New liquid crystalline di- and tetra-acrylates for network formation

New liquid crystalline diacrylates and tetra-acrylates containing four to six aromatic rings were synthesized and characterized, and their mesophase behaviour was investigated. They are designed to be used in combination with chiral molecules to form cholesteric mesophases which can be crosslinked by photopolymerization. The acrylates presented exhibit broad mesophase ranges since mesogenic moieties longer than three are employed. Most diacrylates show no isotropization, due to premature thermal polymerization above 180°C. Additionally, liquid crystalline dipropionates were synthesized as reference compounds which cannot be crosslinked, and selected examples of these exhibit isotropization temperatures as high as 238°C prior to thermal degradation. Substituents at the mesogenic moiety have a great influence on the mesophase characteristics. Bulky substituents such as the tert-butyl group, induce a nematic mesophase, whereas compounds with small substituents (e.g. OCH3) or unsubstituted molecules also exhibit smectic phases. Tetra-acrylates with unsubstituted and substituted mesogenic units feature nematic mesophases only as a result of the additional spacers attached. Here isotropization was observed without polymerization at temperatures around 120-160°C.     

Thermotropic liquid‐crystalline poly(oxadiazole)s with poly(methylene) spacers: Preparation and extraordinary odd–even effect

A novel synthetic procedure for the preparation of poly(oxadiazole)s was developed with nucleophilic substitution of α,ω-alkanediols with oxadiazole-activated bisfluoride. Seven poly(oxadiazole)s were successfully prepared by the solution polymerization of 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole and various α,ω-alkanediols [HO (CH₂)_n OH, n = 5–10 or 12] in diphenyl sulfone at temperature greater than 230 °C with K₂CO₃ as a catalyst. The reduced viscosities of the poly(oxadiazole)s were 0.14–0.51 dL/g, and the decomposition temperatures were greater than 350 °C and decreased from 436 to 379 °C with increasing spacer length (n). Corresponding model compounds, consisting of two terminal mesogenic 2,5-bisphenyl-1,3,4-oxadiazole units and central poly(methylene) spacers, were also prepared for comparison. Both the polymers and model compounds exhibited an extraordinary odd–even effect: odd ones showed higher transition temperatures (melting and clearing temperatures). With differential scanning calorimetry, polarized optical microscopy (POM), and X-ray diffraction, we found that the nematic mesophase was the only texture in the melts except for the polymers with longer methylene units (n = 9), in which smectic mesophases were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 293–301, 2002     

Preparation and mesomorphic properties of 1-methyl-1H-benzimidazole-based compounds

A series of 1-methyl-1H-benzimidazole-based compounds, 2-(4?-alkoxy-1,1?-biphenyl-4-yl)-1-methyl- 1H-1,3-benzimidazole derivatives (nPPMx-M) with terminal hydrogen, methyl and nitro moieties (coded as nPPMH-M, nPPMM-M and nPPMN-M, respectively), were prepared and their structures were characterised. The compounds display enantiotropic smectic mesophases for hydrogen and methyl terminated compounds (nPPMH-M and nPPMM-M), and enantiotropic nematic mesophases for nitro terminated compounds (nPPMN-M) with short alkoxy chain below than 10 carbon atoms, where the mesophase ranges are 24–72°C and 74–104°C on heating and cooling processes for nPPMH-M, 90–119°C and 110–135°C for nPPMM-M, and 102–129°C and 113–207°C for nPPMN-M, respectively. It is noted that the compounds nPPMx-M exhibit much lower melting points and much wider mesophase range both in heating and cooling than non-1-methyl substituted analogs, which are ascribed to the disruption of hydrogen bonding among the molecules caused by methyl substitution at 1-position of benzimidazole. Meanwhile, among the compounds nPPMx-M, much wider mesophase ranges are obtained for nPPMM-M and nPPMN-M, indicating a much high mesophase stability for the compounds bearing terminal moiety (CH₃ and NO₂).     

New liquid crystalline di- and tetra-acrylates for network formation

New liquid crystalline diacrylates and tetra-acrylates containing four to six aromatic rings were synthesized and characterized, and their mesophase behaviour was investigated. They are designed to be used in combination with chiral molecules to form cholesteric mesophases which can be crosslinked by photopolymerization. The acrylates presented exhibit broad mesophase ranges since mesogenic moieties longer than three are employed. Most diacrylates show no isotropization, due to premature thermal polymerization above 180°C. Additionally, liquid crystalline dipropionates were synthesized as reference compounds which cannot be crosslinked, and selected examples of these exhibit isotropization temperatures as high as 238°C prior to thermal degradation. Substituents at the mesogenic moiety have a great influence on the mesophase characteristics. Bulky substituents such as the tert-butyl group, induce a nematic mesophase, whereas compounds with small substituents (e.g. OCH3) or unsubstituted molecules also exhibit smectic phases. Tetra-acrylates with unsubstituted and substituted mesogenic units feature nematic mesophases only as a result of the additional spacers attached. Here isotropization was observed without polymerization at temperatures around 120-160°C.     

Studies on thermotropic liquid crystalline polymers. XV. Synthesis and properties of liquid crystalline copoly(imide-ester)s

Three series of the thermotropic liquid crystalline copoly(imide-ester)s were prepared by direct polycondensation. The first two series of the copoly(imide-ester)s were synthesized from N-(4-carboxyphenyl) trimellitimide with N,N-di(hydroxypropyl) pyromellitic diimide and various aromatic diols. The third series of copoly(imide-ester)s were prepared by N-(4-carboxyphenyl) trimellitimide with various imide-diols (methylene spacer = 2–6) and phenyl hydroquinone. The structures and thermal properties of the synthesized poly(imide-ester)s were examined by FTIR spectrum, wide-angle x-ray diffraction (WAXD), differential scanning calorimetry (DSC), thermal optical polarized microscope, and thermogravimetric analysis (TGA). The effects of the structures of the aromatic diols on the thermal properties of the resulting copoly(imide-ester)s were investigated. It was found that most of the copoly(imide-ester)s possessed excellent mesophase stabilities and thermostabilities. The mesophase stabilities of poly(imide-ester)s decreased with the increase of the size of lateral group, and the mesophase range increased with the increase of the amount of PhHQ. No significant odd-even effects were observed between the methylene spacer lengths and transition temperatures. © 1996 John Wiley & Sons, Inc.     

Molecular engineering of liquid crystal polymers by living polymerization. II. Living cationic polymerization of 11-[(4-cyano-4′-biphenyl) oxy] undecanyl vinyl ether and the mesomorphic behavior of the resulting polymers

The synthesis and living cationic polymerization of 11-[(4-cyano-4′-biphenyl)oxy]-undecanyl vinyl ether ( 6 – 11 ) are described. The mesomorphic phase behavior of poly( 6 – 11 ) with different degrees of polymerization was compared to that of 6 – 11 and of 11-[(4-cyano-4′-biphenyl) oxy] undecanyl ethyl ether ( 8 – 11 ) which is the model compound of the monomeric structural unit of poly( 6 – 11 ). 6 – 11 displays a monotropic S_A and a monotropic nematic mesophase while 8 – 11 an enantiotropic S_A mesophase. Poly( 6 – 11 ) with low degrees of polymerization exhibits an enantiotropic S_A mesophase. Poly( 6 – 8 ) with high degrees of polymerization displays an enantiotropic S_X (i. e., an unidentified smectic phase) and an enantiotropic S_C mesophase. These results demonstrate that the transformation of the nematic mesophase of the monomer into a smectic mesophase after polymerization, occurs at the level of monomeric structural unit.     

Mesogenic cinnamates with a substituted ethyl terminal chain*

Two new mesogenic homologous series of liquid crystalline cinnamates with substituted ethyl tails, β‐methoxyethyl [4‐(4′‐n‐alkoxycinnamoyloxy)benzoates (I) and β‐chloroethyl [4‐(4′‐n‐alkoxycinnamoyloxy)benzoates (II), have been synthesized and characterized by a combination of elemental analysis and standard spectroscopic methods. In series I, lower‐chain members exhibit nematic mesophase, middle members exhibit enantiotropic nematic as well as smectic A (SmA) mesophases, whereas higher members exhibit only an enantiotropic SmA mesophase. In series II, methoxy to n‐butyloxy derivatives exhibit a monotropic nematic mesophase. The SmA mesophase commences from n‐propyloxy derivative as monotropic and persists up to the last member synthesized. The mesomorphic properties of present series were compared with each other and with a structurally related mesogenic homologous series to evaluate the effects of substituted ethyl tail and cinnamoyloxy central linkage on mesomorphism.     

The synthesis and mesomorphic behaviour of tetracatenar di-hydrazine derivatives

Symmetrical four-chained (tetracatenar) di-hydrazine derivatives, namely oxalyl N',N'-bis(3,4-dialkoxybenzoyl)-hydrazide (BFH-n, n?=?4, 6, 8, 10), were synthesised. Investigations on the liquid crystalline properties by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD) and polarising optical microscopy (POM) showed that the di-hydrazine derivatives exhibited columnar mesophases and the symmetry of the mesophase changes from rectangular to hexagonal on increasing the temperature. The rectangular columnar mesophases of BFH-n (n?=?6, 8, 10) remained stable down to 10°C during cooling and the subsequent recrystallisation from the Col_r phase of BFH-n (n?=?6, 8, 10) was observed on the second heating runs. Furthermore, the average number of molecules packing in a column slice was estimated to be three, based on their X-ray diffraction results. Intermolecular hydrogen bonding between –C=O and ?N?H groups in crystalline and liquid crystalline phases was confirmed.     

Catalysis of O-(para-nitrophenyl) O,O-dimethyl thiophosphate decomposition by chromonic mesophases based on polymerized ionic amphiphiles

The formation of a nematic chromonic mesophase in aqueous solutions of quaternized poly(ethylene imine) has been found using polythermal polarization microscopy. The reaction kinetics of O-(para-nitrophenyl) O,O-dimethyl thiophosphate hydrolysis has been studied by spectrophotometry, and a comparative analysis of the effects of lyotropic liquid crystals constructed as hexagonal and chromonic mesophases on this kinetics has been performed. It has been found that the hydrolysis of the substrate in a nematic chromonic mesophase is accelerated due to the concentration of the reactants.