Syntheses and gas transport properties of polyarylates based on isophthalic and terephthalic acids and mixtures of bisphenol A and 1, 1 bi‐2‐naphthol

Polyarylates based on isophthalic (IA) and terephthalic (TA) acids and an equimolar mixture of the diols Bisphenol A (BPA) and 1,1 bi‐2‐naphthol (BN) were synthesized to produce BPA‐BN/IA and BPA‐BN/TA polymers and to measure their gas permeability coefficients, P(i), at several pressures and 35 °C, to the gases O₂, N₂, CH₄, and CO₂. For the BPA‐BN/IA membranes, at a 2 atm up‐stream pressure, the P(O₂) and P(CO₂) are 0.93 and 4.0 Barrers with O₂/N₂ and CO₂/CH₄ ideal separation factors of 6.7 and 27. For the BPA‐BN/TA, at a 2 atm up‐stream pressure, the P(O₂) and P(CO₂) are 2.0 and 9.9 Barrers with O₂/N₂ and CO₂/CH₄ ideal separation factors of 5.6 and 21. Comparing the selectivity–permeability balance of properties shown by the BPA/TA membranes with that shown by the copolymer BPA‐BN/TA, the balance moves in the direction of higher selectivity and lower permeability because of the incorporation of BN, which is a more rigid monomer than BPA. However, when the balance of properties for the pair O₂/N₂ shown by BPA‐BN/TA is compared with the one shown by other membranes such as those based on mixtures of diols and diacids, that is the bisphenol A‐naphthalene/I‐T polymers reported in the literature, the balance moves up and to the right of the typical selectivity–permeability trade‐off observed in the BPA‐polyarylate family. Thus, simultaneous incorporations of flexible and rigid monomers in both the diols and the diacids lead to more productive and more selective membranes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 256–263, 2006     

Structure/permeability relationships of polyimide membranes. Applications to the separation of gas mixtures

The permeability of nine different polyimide membranes to H₂, N₂, O₂, CH₄, and CO₂ has been determined at 35°C and at applied pressures of up to 9 atm. The dianhydride monomers used for the synthesis of the polymides were PMDA and 6FDA, whereas the diamine monomers were ODA, BDAF, and p-PDA. The selectivities of the 6FDA polymides toward CO₂ relative to CH₄ are higher than those of the PMDA polyimides at comparable CO₂ permeabilities. Both types of polyimides exhibit significantly higher CO₂/CH₄ selectivities than more common glassy polymers, such as cellulose acetate, polysulfone, and polycarbonate. The selectivities of the PMDA and 6FDA polyimides to O₂ relative to N₂ are of the same magnitude and generally higher than those of common glassy polymers with similar O₂ permeabilities. The polymides are more permeable to N₂ than to CH₄, whereas the opposite is true for many other glassy polymers. Possible factors responsible for the above behavior, such as segmental mobility, mean interchain distance, and formation of charge transfer complexes, are examined. The relevance of the study to the development of more highly gas-selective and permeable membranes for the separation of gas mixtures is also discussed.     

Gas transport properties of a series of high Tg polynorbornenes with aliphatic pendant groups

A study of gas transport properties of novel polynorbornenes with increasing length of an aliphatic pendant group R (CH₃ , CH₃(CH₂)₃ , CH₃(CH₂)₅ , CH₃(CH₂)₉ ) has been performed. These polymers were synthesized using novel organometallic complex catalysts via an addition polymerization route. This reaction route maintained the bridged norbornene ring structure in the final polymer backbone. Gas permeability and glass transition temperature were found to be higher than those for polynorbornenes prepared by ring-opening metathesis and reported in the literature. It was shown that for noncondensable gases such as H₂ and He the selectivity over N₂ decreased when the length of the pendant group increased, but remained relatively stable for the more condensable gases (O₂ and CO₂). The permeability coefficient is correlated well to the inverse of the fractional free volume of the polymers. The more condensable gases showed a deviation from this correlation for the longest pendant group, probably due to an increase of the solubility effect. This polymer series demonstrated a simultaneous increase in permeability and selectivity, uncommon for polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 797–803, 1998     

Predictions of cation and anion effects on solubilities,selectivities and permeabilities for CO2 in ionic liquid using COSMO based activity coefficient model

The solubilities and selectivities for CO₂, N₂ and CH₄ in ionic liquid were predicted using a COSMO based activity coefficient model, COSMO-SAC method. The 1-alkyl-3-methylimidazolium cations were focused in this work. The anion species include tetrafluoroborate [BF₄], hexafluorophosphate [PF₆], triflate [OTf], dicyanamide [dca] and bis(trifluoromethane)-sulfonimide [Tf₂N]. The predicted results of the solubilities of CO₂ in the ionic liquids by COSMO-SAC method are in agreement with the experimental data within the averaged deviation of 0.0017 in mole fraction. The predicted results of selectivities for CO₂/N₂ and CO₂/CH₄ represent the effects of anion species qualitatively. Permeability through supported liquid membrane can be presented by solubility and diffusion coefficients in the liquid. The permeabilities of CO₂ through the ionic liquid membranes were also predicted by a solution-diffusion model with COSMO-SAC method. The predicted results of the CO₂ permeabilities through the ionic liquids represent the experimental data within the order of the permeabilities.     

Effect of structure on the temperature dependence of gas transport and sorption in a series of polycarbonates

The permeabilities and solubilities of five gases are reported for bisphenol-A polycarbonate (PC), tetramethyl polycarbonate (TMPC), and tetramethyl hexafluoro polycarbonate (TMHFPC) at temperatures up to 200°C. The temperature dependence of permselectivity is discussed in terms of solubility and diffusivity selectivity changes with temperature for CO₂/CH₄ and He/N₂ gas separations. The activation energies for permeation and diffusion and the heats of sorption are also reported for each gas in the three polycarbonates. Analysis of these values provides a better fundamental understanding of the effect of polymer-penetrant interactions and polymer backbone structure on the temperature dependence of the transport and sorption properties of gases in membrane separation processes. Important factors affecting the solubility and diffusivity selectivity losses or gains with increased temperature are also identified through correlation of these data with physical properties of the gases and polymers. These conclusions provide a framework for choosing the most promising membrane materials for particular gas separations at elevated temperatures. © 1994 John Wiley & Sons, Inc.     

Effect of temperature and membrane preparation parameters on gas permeation properties of polymethacrylates

Permeabilities of N₂, Ar, O₂, CO₂, and H₂ gases in PEMA (Polyethylmethacrylate) membranes have been measured above and below glass transition in the temperature range of 25–70 °C. The permeabilities of the gases were observed increasing with temperature. Arrhenius plot of permeability versus temperature data showed that there is a slope discontinuity at near to T_g of PEMA. In addition, the effects of membrane preparation parameters by solvent casting method (percentage of polymer in solvent, annealing temperature, annealing time, evaporation temperature, and evaporation time) have been investigated by using homogenous dense membranes of PEMA. It is observed that membrane preparation parameters strongly affect the membrane performance and the reproducibility of the permeability measurements. On the other hand, the effect of polymer structure on membrane performance has been investigated. Comparison of the permeabilities of N₂, Ar, O₂, CO₂, and H₂ gases in PEMA and PMMA membranes shows that PMMA membranes have smaller permeabilities and higher selectivities than PEMA membranes because of their higher glass transition temperature, T_g. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3025–3033, 2007     

Gas transport properties of soluble poly(phenylene sulfone imide)s

Gas transport of helium, hydrogen, carbon dioxide, oxygen, argon, nitrogen, and methane in three soluble poly(phenylene sulfone imide)s based on 2,2-bis(3,4-decarboxyphenyl) hexafluoropropane dianhydride (6FDA) has been investigated. The effects of increasing length of well-defined oligo(phenylene sulfone) units on the gas permeabilities and diffusivities were determined and correlated with chain packing of the polymers. Activation energies of diffusion and permeation were calculated from temperature-dependent time-lag measurements. The influences of the central group in the diamine moiety of 6FDA-based polyimides on physical and gas transport properties are discussed. The incorporation of a long oligo(phenylene sulfone) segment in the polymer backbone decreases gas permeability and permselectivity simultaneously. The decreases in permeability coefficients can be mainly related to decreases in diffusion coefficients. Changing the central group of diamine moiety from  S to  SO₂ leads to a 45–50% decrease in CO₂ and O₂ permeabilities without appreciable increase in the selectivities. This is considered to be due to the formation of charge transfer complexes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1855–1868, 1997     

6FDA-containing polyimide-ionene + ionic liquid gas separation membranes

Polyimides (PI) synthesized from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA) with various diamines have been frequently studied as gas separation membranes. The use of 6FDA in polyimides creates a bent structure than can increase fractional free volume (FFV) and gas permeability. Here, we demonstrate that 6FDA is also a useful building block for PI-ionene materials, which contain cations directly within the polymer backbone. These new 6FDA-containing PI-ionenes were combined with several different imidazolium ionic liquids (ILs) to form thin membranes. The thermal properties of all the derivatives were investigated to determine the relationship between regiochemistry and degradation as well as the intermolecular forces that are present within these structures. The gas separation properties of these 6FDA-containing PI-ionene + IL materials were investigated, showing modest CO₂ permeabilities similar to other polyimide-ionenes and CO₂/CH₄ and CO₂/N₂ permselectivities that were relatively higher than other polyimide-ionenes.     

PEG modified poly(amide-b-ethylene oxide) membranes for CO2 separation

In the present work, membranes from commercially available Pebax^® MH 1657 and its blends with low molecular weight poly(ethylene glycol) PEG were prepared by using a simple binary solvent (ethanol/water). Dense film membranes show excellent compatibility with PEG system up to 50 wt.% of content. Gas transport properties have been determined for four gases (H₂, N₂, CH₄, CO₂) and the obtained permeabilities were correlated with polymer properties and morphology of the membranes. The permeability of CO₂ in Pebax^®/PEG membrane (50 wt.% of PEG) was increased two fold regarding to the pristine Pebax^®. Although CO₂/N₂ and CO₂/CH₄ selectivity remained constant, an enhancement of CO₂/H₂ selectivity (∼11) was observed. These results were attributed to the presence of EO units which increases CO₂ permeability, and to a probable increase of fractional free-volume. Furthermore, for free-volume discussion and permeability of gases, additive and Maxwell models were used.     

Gas permeation properties of ethylene vinyl acetate–silica nanocomposite membranes

The effect of silica nanoparticles on the gas separation properties of ethylene vinyl acetate (EVA) copolymer containing 28% vinyl acetate has been investigated. The EVA and hybrid EVA–silica membranes were prepared via thermal phase inversion method. Silica nanoparticles prepared by hydrolysis of tetraethylorthosilicate (TEOS), through the sol–gel mechanism. The prepared membranes were characterized using FT-IR, SEM, DSC and XRD methods. FT-IR and SEM results indicated the nanoscale dispersion of silica particles in polymer matrix. As confirmed by XRD and DSC analyses, increasing the silica content enhances the amorphous regions significantly. Gas permeation of EVA–silica nanocomposite membranes with silica contents of 5, 6 and 10 wt.% was studied for N₂, O₂, CO₂ and CH₄ single gases at pressures of 4, 6 and 8 bar. The obtained results suggest a significant increase in permeability of all gases and an increase in CO₂/N₂ and CO₂/CH₄ gases selectivities upon increasing the silica content. The possible reasons for such behavior were stated and discussed. The pressure dependence of the gas permeabilities of the membranes was also investigated.     

Synthesis and properties of polyimides from thianthrene-2,3,7,8-tetracarboxylic dianhydride-5,5,10,10-tetraoxide

Thianthrene - 2,3,7,8 - tetracarboxylic dianhydride - 5,5,10,10 - tetraoxide (TADATO), a dianhydride having two sulfonyls between two phenyl rings, was synthesized and polymerized with several diamines by a two-step method. Tough polyimide membranes were obtained with flexible diamines but not with rigid diamines. Most of TADATO-based polyimides are soluble in polar solvents such as N,N-dimethylacetamide and N-methyl-2-pyrrolidone. IR study confirmed that almost complete imidization of TADATO-based poly(amic acid) membranes could be achieved by thermal treatment at 100, 200, and 300°C for each 1 h. In a series of polyimides based on 4,4′-oxydianiline, the polyimide from TADATO showed higher gas permeability coefficient of CO₂ and higher selectivities of CO₂/N₂ and CO₂/CH₄ than those of polyimides from pyromellitic dianhydride and 3,3′,4,4′-biphenyltetracarboxylic dianhydride, and was comparable to that from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 485–494, 1998     

The effect of pressure on gas permeation through semicrystalline polymers above the glass transition temperature

A method is proposed to analyze the effect of pressure on permeation of gases through semicrystalline polymers above the glass transition temperature. The method utilizes similarities in molecular diameters of the gases and differences in their solubilities. Two polymers, polyethylene and polypropylene, and a series of gases are chosen for an application of the method, and the effect of pressure on the permeabilities for 10 gases is measured in the pressure range 1–130 atm at 25°C. For polymers, the logarithm of the permeability coefficient is linear in the pressure for each gas, with negative slope for slightly soluble gases (He, Ne, H₂, N₂, O₂, and Ar) and positive slope for highly soluble gases (CH₄, Kr, CO₂, and N₂O). Analyzing these slopes by the method proposed permits contributions of hydrostatic pressure and concentration to the pressure dependence of permeation to be evaluated. On the basis of the results, the mechanism of gas permeation in rubbery films under high pressures is discussed.     

Gas transport properties of poly(ether‐b‐amide) segmented block copolymers

The permeation properties of H₂, N₂, and CO₂ were determined at 35 °C and pressures up to 15 atm in phase‐separated polyether‐b‐polyamide segmented block copolymers. These polymers contain poly(ethylene oxide) [PEO] or poly(tetramethylene oxide) [PTMEO] as the rubbery polyether phase and nylon‐6 [PA6] or nylon‐12 [PA12] as the hard polyamide phase. Extremely high values of polar (or quadrupolar)/nonpolar gas selectivities, coupled with high CO₂ permeability coefficients, were observed. CO₂/H₂ selectivities as high as 9.8 and CO₂/N₂ selectivities as high as 56 were obtained in polymers with CO₂ permeability coefficients of approximately 220 × 10⁻¹⁰ cm³(STP) cm/(cm² s cmHg). As the amount of polyether increases, permeability increases. Gas permeability is higher in polymers with less polar constituents, PTMEO and PA12, than in those containing the more polar PEO and PA6 units. CO₂/N₂ and CO₂/H₂ selectivities are higher in polymers with higher concentrations of polar groups. These high selectivity values derive from large solubility selectivities in favor of CO₂. Because CO₂ is larger than H₂ and has, therefore, a lower diffusion coefficient than H₂, the weak size‐sieving ability of the rubbery polyether phase, which is the locus of most of the gas permeation, also contributes to high CO₂/H₂ selectivity. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2051–2062, 2000     

Transport properties of polyimides containing phenylquinoxaline moieties

The gas permeabilities of a number of new structurally related polyimides containing phenylquinoxaline moieties were studied for the first time. The test polymers had different dianhydride units, whereas their diamine components differed in the presence of flexible ether bonds-O-in the main chain, a structure that is reflected in the effective packing of chains and, as a result, in transport parameters. The permeability, diffusion, and solubility coefficients for the gases H₂, He, O₂, N₂, CO, CO₂, and CH₄, as well as the ideal separation factors for gas pairs, were determined. The transport characteristics of polymers were compared within the given polymer series and with published data for other polymer series.     

Gas transport properties of novel poly(arylene ether ketone)s containing dibenzoylbiphenyl and benzonaphthone moieties

In this work we present the results from studies on novel poly(arylene ether ketone)s, including gas permeability, wide-angle x-ray diffraction (WAXD), and dynamic mechanical analysis (DMA). Poly(arylene ether ketone)s containing 2,2′- and 3,3′-dibenzoylbiphenyl (DBBP) moieties were characterized to study the effect of biphenyl substitution on gas transport properties. Gas permeabilities of naphthalene-containing poly(arylene ether ketone)s were also measured. Higher permeabilities were observed for polymers prepared with 6F-BPA, compared to 9,9-bis(4-hydroxyphenyl)fluorene (HPF). The naphthalene-containing polymers exhibited higher permeabilities than the DBBP polymers, except for a polymer having the 2,2′-DBBP and tetramethylbiphenyl moieties. Based on our work, and results reported in the literature, the 3,3′-DBBP polymers showed the lowest permeabilities for DBBP-containing poly-(arylene ether ketone)s. The low permeabilities are due to more efficiently packed chains brought on by greater flexibility of the backbone, compared to the other polymers studied. DMA studies confirmed the higher barriers to rotation which are believed to be responsible for 2,2′-DBBP polymers having similar selectivities compared to 3,3′-DBBP polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 425–431, 1998     

Simplified analysis of gas/polymer selective solubility behavior

Interactions of penetrants with gas separation membrane materials can have both desirable and undesirable consequences. Improved permselectivity resulting from specific polymer/penetrant interactions must be balanced against potentially undesirable plasticization effects resulting from such interactions. Consideration is given to the utility of gas solubility measurements in low-molecular-weight solvents as an aid to understanding solubility data for polymer/gas systems. The solubility coefficients of gases in low-molecular-weight liquids and in polymeric media of similar chemical structure tend to be quite different in magnitude. “Equation-of-state” and combinatorial entropy differences for the free energy of mixing of gases with low-molecular-weight solvents and high-molecular-weight polymers presumably cause this discrepancy. The above complications are minimized and useful trends identified by considering the so-called solubility selectivity comprised of ratios of absolute gas solubilities in both low-and high-molecular-weight media of similar chemical natures. For example, both acetone and methyl acetate are highly sorptive of CO₂ and display a high degree of solubility selectivity for CO₂ relative to CH₄. These two solvents have mass densities of carbonyl groups that are similar to that in cellulose acetate and poly(methyl methacrylate). Both of these polymers are also highly sorptive of CO₂ and have solubility selectivities for CO₂ relative to CH₄ that are similar to that of acetone and methyl acetate. Anomalous behavior is encountered in the case of Kapton poly(ether diimide), which contains a high density of carbonyl groups (four per repeat unit). On the basis of the behavior of the other carbonyl-rich polymers, it was expected that Kapton would show high solubility selectivity for CO₂ relative to CH₄, but this was not observed. A hypothetical explanation for the Kapton behavior is presented. In addition, possible advantages of the Kapton-type behavior are discussed in the context of the reported good plasticization resistance of polyimides.     

Gravimetric study of high-pressure sorption of gases in polymers

A gravimetric method for determining precisely the solubility of gases in polymers at high pressure is described. The solubilities of N₂ and CO₂ in low-density polyethylene (LDPE); CO₂ in polycarbonate (PC); and N₂, CH₄, C₂H₆, and CO₂ in polysulfone (PSUL) have been measured as a function of pressure up to 50 atm. Most of the measured sorption isotherms agreed closely with published data, but reproducible and time-dependent hysteresis in the sorption of CO₂, C₂H₆, and CH₄ in glassy polymers, PC, and PSUL, was observed in this study for the first time. Like the well known conditioning effect of high-pressure CO₂ on the sorption capacity of glassy polymers, these hysteresis phenomena are believed to be due to the plasticizing effect of sorbed gases. On the basis of the current data, the dual-mode sorption model including the plasticization by sorbed gas is discussed and a primitive equation for the concentration of sorbed gases in a quasiequilibrium state of sorption or desorption is proposed.     

Solubility of carbon dioxide,methane, and propane in silicone polymers. Effect of polymer backbone chains

The solubility of carbon dioxide, methane, and propane in poly(dimethyl silmethylene) [(CH₃)₂SiCH₂]_x and poly(tetramethyl silhexylene siloxane) [(CH₃)₂Si (CH₂)₆Si (CH₃)₂O]_x was measured in the temperature range from 10.0 to 55.0°C and at elevated pressures. The present results are compared with similar measurements made with other silicone polymers. At a given temperature and pressure, the solubility of the above three gases is highest in poly(dimethyl siloxane) (Me₂SiO)_x. The gas solubility is decreased by either backbone-chain or side-chain substitutions of functional groups in (Me₂SiO)_x which increase the stiffness of the polymer chains and decrease the specific or fractional free volume of the polymers. It is conjectured that a decrease in the free volume of silicone polymers has a greater effect in decreasing the gas solubility than differences in gas/polymer interactions [with the exception of specific interactions (e.g., between CO₂ and polar groups in the polymer)]. © 1993 John Wiley & Sons, Inc.     

Permeation of binary gas mixture through glassy polymer membranes with concentration-dependent diffusivities

An analytical solution has been obtained for the modified dual-mode mobility model for a single gas proposed by Zhou and Stern and extended to a binary gas mixture to describe the pressure dependence of mean permeability coefficients for CO₂ and CH₄ mixtures in homogeneous cellulose triacetate membranes. The permeabilities calculated from the model fitted the corresponding experimental results quite well. Permeation experiments for equimolar CO₂ and CH₄ mixture in a homogeneous membrane of methyl methacrylate and n-sbutyl acrylate copolymer were performed along with sorption experiments for pure CO₂ and CH₄ to test the applicability of the model. The experimental permeabilities were close to those calculated from the model.     

Synthesis,characterization, and gas permeation properties of adamantane‐containing polymers of intrinsic microporosity

A new bis(catechol) monomer, namely, 4,4′‐((1r,3r)‐adamantane‐2,2‐diyl)bis(benzene‐1,2diol) (THADM) was synthesized by condensation of 2‐adamantanone with veratrole followed by demethylation of the formed (1r,3r)‐2,2‐bis(3,4 dimethoxyphenyl)adamantane. Polycondensation of THADM and various compositions of THADM and 5,5,6′,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane was performed with 2,3,5,6‐tetrafluoroterephthalonitrile (TFTPN) to obtain the homopolymer and copolymers. These polymers demonstrated good solubility in common organic solvents such as dichloromethane, chloroform, and tetrahydrofuran and could be cast into tough films from their chloroform solutions. GPC analysis revealed that number average molecular weights of polymers were in the range 48,100–61,700 g mol⁻¹, suggesting the formation of reasonably high molecular weight polymers. They possessed intrinsic microporosity with Brunauer‐Emmett‐Teller (BET) surface area in the range 703–741 m² g⁻¹. Thermogravimetric analysis of polymers indicated that 10% weight loss temperature was in the range 513–518 °C demonstrating their excellent thermal stability. THADM‐based polymer of intrinsic microporosity (PIM) showed P(CO₂) = 1080, P(O₂) = 232 and appreciable selectivity [α(CO₂/CH₄) = 22.6, α(CO₂/N₂) = 26.7, and α(O₂/N₂)= 5.7]. The gas permeability measurements revealed that with increase in the content of adamantane units in PIMs, selectivity increased and permeability decreased, following the trade‐off relationship. The gas separation properties of PIMs containing adamantane units were located close to 2008 Robeson upper bound for gas pairs such as CO₂/CH₄, CO₂/N₂, H₂/N₂, and O₂/N₂. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 16–24