CdS和CdSe薄膜的制备及其光电化学性质

本文采用简易的化学水浴沉积法和自牺牲模板法制备CdS、CdSe薄膜,对两种薄膜进行了XRD表征,比较了两种薄膜的紫外吸收光谱并研究了CdS、CdSe薄膜作为太阳能电池中的光阳极时所产生的光电流和光电压,对两种薄膜的电化学性能进行了比较.     

Copolymers of nylon 266 and nylon 66: Synthesis and characterization

Copolymers of nylon 266 and nylon 66 were prepared by interfacial polymerization of N-glycyl hexanediamine and hexanediamine with adipoyl chloride. According to the results of intrinsic viscosity measurements and GPC analysis, the molecular weights of the copolymers were relatively high. The structure of the copolymers was confirmed by FTIR, and the compositions were determined by ¹H-NMR spectroscopy. The copolymers have similar solubility features as nylon 66. Both melting and glass transition temperatures showed a minimum at around 20–30% nylon 66 content. The copolymers are semicrystalline. Copolymers with lower T_m could be melt-spun into fibers without appreciable thermal degradation. © 1993 John Wiley & Sons, Inc.     

Electrical DC conduction mechanism in some newly synthesized nylon 6/12 copolymers

The synthesis and the study of DC electrical transport properties (electrical conductivity, σ, and Seebeck coefficient, S) as a function of temperature of some recently synthesized nylon 6/12 copolymers with 0, 5, 10, 20, 30, and 50 wt % laurolactam (LL), respectively, are reported. Nylons were obtained by rotational molding via the anionic activated copolymerization of ε‐caprolactam and LL. As evidenced by XRD analyses, they are semicrystalline. The temperature dependences of σ and S are typical for polycrystalline semiconducting (p‐type) materials. The activation energy of electrical conduction lay in the range 0.79–1.22 eV, while the ratio of charge carrier mobilities ranged between 0.53 and 0.77. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 794–799, 2007     

A novel approach to thermal Analysis of Thin films

A novel instrument is described called the Thin film Analyser (TFA) which quantitatively measures changes in mechanical and rheological properties of drying films in-situ on a test panel. It is based around a simple force-sensing device, capable of carrying various probes, which can be positioned in anX-Y plane over the panel. Temperature control is achieved by means of a heating block under the sample. By imposing a thermal gradient along the block, measurements can be obtained at a series of temperatures in a single experiment. Several applications of the TFA to the drying of curable and latex-based coatings are discussed, as well as some more specialized uses. The TFA concept represents a novel approach to the thermal analysis of thin films.The authors gratefully acknowledge the design, engineering and software development work of the Instrument Group at ICI Paints, in particular John Hayton, Neil Burrows, Tony Evans and Ian Francis, who have now built three versions of the TFA.     

Morphology and thermomechanical properties of latex films

Latex films involve polymers, copolymers and (or) polymer blends, with more or less complex morphologies. First of all, the mechanical behavior of their amorphous polymeric component is considered. A theoretical approach, which relates macroscopic behavior to molecular processes, is used to model its dynamic mechanical properties and also plastic behavior. Then, in the case of heterogeneous films, we propose that information about the morphology of samples can be deduced from a comparison of their measured viscoelastic properties with the corresponding properties calculated for a suitable model. After a brief review of the theoretical approaches for the mechanical behavior of multiphase systems, we show the validity of the procedure in the case of latex films obtained from different copolymerization pathways. Thus, it is possible (a) to get information about the morphology of binary systems, (b) to determine the stability of the morphology, and (c) to characterize a third phase as an interphase between nodules and matrix. High stress–strain behavior is discussed in the case of latex films reinforced with nanoparticles of silica or with cellulose whiskers.     

含氮磷酸锂薄膜在空气中的稳定性

利用射频(RF)磁控溅射方法制备了含氮磷酸锂(LiPON)薄膜. 采用SEM、XRD、XPS等技术以及交流阻抗法和电位线性扫描法, 研究了空气湿度对LiPON薄膜形貌、组成和性能的影响. 结果表明, LiPON薄膜在湿度为40%的空气环境中放置24 h后, 将发生明显的水解反应, 使LiPON薄膜表面形貌变得疏松、局部突起; PH3和NH3的产生, 使薄膜中磷元素和氮元素含量减少, 而Li2CO3的生成, 则使薄膜中碳元素和氧元素含量有明显的增加. LiPON电解质薄膜形貌和组成的变化, 造成了薄膜电化学性能的严重恶化.     

Ferroelectric and piezoelectric properties of nylon 11/poly(vinylidene fluoride) bilaminate films

The ferroelectric and piezoelectric properties of a new class of polymer ferroelectric and piezoelectric materials, nylon 11/polyvinylidene fluoride (PVF₂) bilaminate films, prepared by a co-melt-pressing method, is presented. The bilaminate films exhibit typical ferroelectric D-E hysteresis behavior with a remanent polarization, P_r, of about 75 mC/m², which is higher than the value of 52 mC/m² observed for PVF₂ or nylon 11 films measured under the same conditions. The coercive field, E_c, of the bilaminate films is ～ 78 MV/m, which is higher than that of either PVF₂ or nylon 11 films. Measurements of the temperature dependence of the piezoelectric strain coefficient, d₃₁, and the piezoelectric stress coefficient, e₃₁, were also carried out. The bilaminate films exhibit a piezoelectric strain coefficient, d₃₁, of 41 pC/N at room temperature, which is significantly higher than the PVF₂ films (25 pC/N) and the nylon 11 films (3.1 pC/N). When the temperature is increased to 110°C, d₃₁ of the bilaminate films reaches a maximum value of 63 pC/N, more than five times that of PVF₂ (11 pC/N) and more than four times that of nylon 11 (14 pC/N) at the same temperature. The piezoelectric stress coefficient, e₃₁, of the bilaminate films shows a value of 109 mC/m² at room temperature, almost twice that of the PVF₂ films (59 mC/m²) and about 18 times that of the nylon 11 films (6.2 mC/m²). Measurement of the temperature dependence of the hydrostatic piezoelectric coefficient, d_h, of the bilaminate films also shows an enhancement with respect to the individual components, PVF₂ and nylon 11. ©1995 John Wiley & Sons, Inc.     

Critical properties of thin films of polymer solutions

The critical properties of polymer solutions confined in thin‐film environments is studied with simple scaling arguments and a molecular theory. For purely repulsive surfaces, the critical volume fraction is a universal function of x = N^1/2/L, where N is the chain length and L is the film thickness. The critical volume fraction is nonmonotonic in x and shows a deep minimum at a film thickness several times larger than the chain's radius of gyration. This nonmonotonic behavior results from the interplay between the surface–polymer entropic repulsion and the tendency of the film to avoid large density gradients. The critical temperature is a monotonically increasing function of L, as L goes from the two‐dimensional limit to the three‐dimensional limit. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1849–1853, 2005     

Pattern replication in blends of semiconducting and insulating polymers casted by horizontal dipping

Pattern replication in solution‐deposited thin films of insulating and conjugated polymer mixtures might provide an alternative to spatially resolved printing techniques for the fabrication of polymer‐based circuitries. Though it has been previously shown that phase separation in the course of spin‐casting leads to the formation of domain structures resembling the chemical patterns pre‐set on the film substrate, finding optimal casting conditions is a tedious process, which requires multiple sample preparations. Here, we have demonstrated pattern replication in a mixture of poly(3,3′′′‐didodecyl quarter thiophene) (PQT‐12) and deuterated poly(styrene‐co?4‐bromostyrene) (dPBrS) deposited by horizontal‐dipping on substrates, patterned with self‐assembling molecules by micro‐contact printing. Moreover, we show that casting conditions for accomplishing pattern replication can be efficiently screened by preparing thickness gradient samples. We have optimized the reconstruction of the substrate pattern in the PQT‐12:dPBrS film. Our results prove that desired structures of semiconducting and insulating polymers can be produced in a simple, high‐throughput technological process. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1419–1426     

Studies on surface structures of poly(ethylene oxide)‐segmented nylon films

The surface structures of three kinds of poly(ethylene oxide)‐segmented nylon (PEO‐Ny) molten films were investigated using a scanning electron microscopy (SEM), an electron spectroscopy for a chemical analysis (ESCA), and a static secondary ion mass spectrometry (SSIMS). The PEO‐Ny's used were high semicrystalline PEO‐segmented poly(iminosebacoyliminohexamethylene) (PEO‐Ny610), low semicrystalline PEO‐segmented poly(iminosebacoylimino‐m‐xylene) (PEO‐NyM10), and amorphous PEO‐segmented poly(iminoisophthaloyliminomethylene‐1,3‐cyclohexylenemethylene) (PEO‐NyBI). SEM observations show that the surfaces of the PEO‐Ny610 and PEO‐NyM10 films are composed of spherulite, and that PEO‐NyBI film has a smooth surface. The results of ESCA and SSIMS exhibit the significant enrichments of PEO segment at the surfaces of all the films regardless of the crystallinity. The reason for the enrichment of PEO segment was discussed in terms of the surface tension of the corresponding homopolymers in the melting state. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1045–1056, 2000     

Combinatorial Mapping of Substrate Step Edge Effects on Diblock Copolymer Thin Film Morphology and Orientation

We have used a combinatorial gradient technique to map precisely how the terrace structure and microdomain lattice alignment in a thin film of a sphere‐forming diblock copolymer are affected by both the thickness of the copolymer film and the height of a series of parallel step edges fabricated on the substrate. We find that for film thicknesses slightly incommensurate with integer numbers of sphere layers, the step edges act as nucleation sites for regions with one more or one fewer layers of spheres. We also find that for our system, the hexagonal lattice formed by a single layer of spheres on the low side of a step edge is aligned along the direction of the step edge only where the film on the high side is sufficiently thin to support only a wetting layer of copolymer material. This work will guide the tuning of film thickness and step height in future studies and applications of graphoepitaxy in block copolymer films.

     

Morphology of nylon 6/polypropylene blends compatibilized with maleated polypropylene

Transmission electron microscopy (TEM) was used to examine the morphology of blends of nylon 6 and polypropylene (PP) containing various maleated polypropylenes (PP-g-MA). The size of the dispersed polypropylene particles decreases as the content of maleic anhydride in the PP-g-MA increases for binary blends of nylon 6 and the maleated polypropylenes. Ternary blends of nylon 6, PP, and PP-g-MA show morphologies that depend on the content of maleic anhydride of the PP-g-MA and on the miscibility of PP and PP-g-MA. Blends where PP and PP-g-MA are immiscible show a bimodal distribution of particle sizes. Miscibility of the PP and PP-g-MA was determined by TEM using a special staining technique. Experimental observations of miscibility were further corroborated by thermodynamic calculations. The morphology of the ternary blends was also found to be dependent on the ratio of PP/PP-g-MA. By changing this ratio it was possible to induce drastic changes of morphology, going from a continuous nylon 6 phase to a continuous PP phase at a fixed composition. The mechanical properties of these blends were found to be dependent on their morphology. ©1995 John Wiley & Sons, Inc.     

Surface Morphology Evolution of a Thin Polymeric Supramolecular Film by Tuning Interactions

Summary: A polymeric supramolecule consisting of symmetric polystyrene‐block‐poly(4‐vinylpyridine) (PS‐b‐P4VP), dodecylbenzenesulfonic acid (DBSA), and 3‐pentadecylphenol (PDP) was formed by proton transfer and hydrogen bonding. The surface morphology of a thin film of the polymeric supramolecule has been investigated. The spherical PS microdomains embedded in a P4VP(DBSA)_1.0(PDP)_1.0 matrix are observed for the as‐cast film because the weight fraction, f_comb, of the P4VP(DBSA)_1.0(PDP)_1.0 blocks is much higher than that of PS as a result of the non‐covalent interactions of P4VP and DBSA and DBSA and PDP. Upon annealing the PS‐b‐P4VP(1:1)(DBSA)_1.0(PDP)_1.0 film at high temperatures, the hydrogen bonding between the DBSA and PDP diminishes, which leads to a change of overall morphology from an ordered sphere to a pitted structure.

AFM topographic image of a PS‐b‐P4VP(1:1)(DBSA)_1.0(PDP)_1.0 thin film.     

Thin films sensitive to pH changes prepared by sol-gel method

The light absorption change of phenolphthalein entrapped in a silica or titania matrix coated as a thin film onto a quartz optical fibre or on planar substrate by the sol-gel technique has been studied. The possibility to use this effect together with evanescent wave principle for the monitoring of pH changes has been tested. The film drying conditions necessary for the film to be sensitive to pH changes were determined experimentally. The stability and reversibility of the colour change was found to be better in the case of titanium matrix.     

Thin films of mesoporous silica: preparation and characterization

Preparation of mesoporous materials in a thin film geometry was first reported in 1996. Recently, improvement of the preparation methods yielded stable films with well-defined symmetries, controlled pore orientation, continuity and film thickness. The ability to tailor film properties is important for their utilization in applications ranging from catalysis to microelectronics, where morphological control in the meso-domain is vital.     

The effect of different substrate temperatures on the structure and luminescence properties of Y2O3:Bi3+ thin films

Y₂O₃:Bi³⁺ phosphor thin films were prepared by pulsed laser deposition in the presence of oxygen (O₂) gas. The microstructure and photoluminescence (PL) of these films were found to be highly dependent on the substrate temperature. X-ray diffraction analysis showed that the Y₂O₃:Bi³⁺ films transformed from amorphous to cubic and monoclinic phases when the substrate temperature was increased up to 600 °C. At the higher substrate temperature of 600 °C, the cubic phase became dominant. The crystallinity of the thin films, therefore, increased with increasing substrate temperatures. Surface morphology results obtained by atomic force microscopy showed a decrease in the surface roughness with an increase in substrate temperature. The increase in the PL intensities was attributed to the crystallinity improvement and surface roughness decrease. The main PL emission peak position of the thin films prepared at substrate temperatures of 450 °C and 600 °C showed a shift to shorter wavelengths of 460 and 480 nm respectively, if compared to the main PL peak position of the powder at 495 nm. The shift was attributed to a different Bi³⁺ ion environment in the monoclinic and cubic phases.     

Anti-biofouling properties of amphiphilic phosphorylcholine polymer films

Surfaces of amphiphilic phosphorylcholine polymer (PC1036) prepared by spin-coating were characterized by spectroscopic ellipsometry, water contact angle and atomic force microscopy. The antifouling properties of the PC1036 films to marine benthic diatom Nitzschia closterium MMDL533 were also investigated. The results showed that the dry PC1036 film promoted the adhesion of N. closterium MMDL533 because the hydrophobic lauryl groups were present in the film surface. The 2 h-swelled PC1036 films had excellent anti-fouling properties with extremely low attachment densities and retention densities no matter what the annealing temperature was. The thickness of the coated films lower than 147 Å had a profound effect on the film anti-fouling properties. Otherwise, when the film thickness was higher than that value, there was no more improvement of diatom cell reduction observed. The annealing temperature had only a little effect on the film resistant to diatom adhesion, which might be attributed to two factors including the PC group packing densities in the outer PC layer and the equilibrated water volume fraction in the 2 h-swelled PC1036 films.     

Nanomechanical properties in ultrathin polymer films: Measurement on rectangular versus circular bubbles

Prior studies of inflation of circular membranes of ultrathin polystyrene (PS) films have evidenced a reduced glass transition temperature (T_g) and rubbery stiffening, whose origins remain unclear. Here, we describe results from inflation of rectangular, ultrathin films of the same PS material. The bubble shapes obtained from the experiment are consistent with finite element (FE) simulations. The accuracy of three approximate solutions for modulus obtained from the inflation of the thin, rectangular films was evaluated by comparison with FE analysis. The best among the three solutions was used to determine the creep compliance and rubbery stiffness of the thin films. It is found that the reduction of T_g and the rubbery stiffening for rectangular bubbles are consistent with results obtained using circular bubbles, although there is some indication that the rectangular bubbles give somewhat greater rubbery stiffening. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012