Ketene acetal monomers: Cationic photopolymerization

A study of the photoinduced cationic polymerization of a novel series of cyclic and acyclic ketene acetal monomers was carried out. It was observed that the cyclic monomers underwent facile cationic polymerization to give high molecular weight polymers while the acyclic ketene acetals did not. Thermally induced polymerization was also observed on standing catalyzed by glass surfaces. Photoinduced cationic polymerizations employing both diaryliodonium and triarylsulfonium salt photoinitiators were studied. It was observed that the position and type of substitutents in the cyclic ketene acetals was the major factor in determining the proportion of vinyl and ring-opening polymerizations that take place. © 1996 John Wiley & Sons, Inc.     

Synthesis and cationic photopolymerization of electroactive monomers containing functional groups

The synthesis and cationic photopolymerization of different cationically polymerizable monomers containing electroactive groups are reviewed with 98 references. The preparation of various compounds containing electron‐donor or electron‐acceptor moieties and photopolymerizable functional groups is described. After a short discussion of basic principles of cationic polymerization, photoinduced cationic polymerizations of various cationically polymerizable monomers containing both electron‐donor or electron‐acceptor chromophores and the functional groups such as epoxy, vinyl, thiiranyl, oxetanyl and others are reviewed. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and cationic photopolymerization of alkoxyallene monomers

A series of cationically polymerizable mono-and difunctional alkoxyallene monomers have been prepared via the straight forward base catalyzed isomerization of the corresponding propargyl ethers. Rate studies conducted using real-time infrared spectroscopy showed that these monomers exhibit high reactivity in photoinitiated cationic polymerization. Monomers bearing a single alkoxyallene group undergo rapid polymerization to yield crosslinked polymers indicating that both double bonds react during polymerization. A mechanism has been proposed that explains this observation. © 1995 John Wiley & Sons, Inc.     

Synthesis and cationic photopolymerization of 1-butenyl ether monomers

A new series of cationically polymerizable mono-, di- and multifunctional 1-butenyl ether monomers have been prepared in high yields by the ruthenium catalyzed isomerization of the corresponding crotyl (2-butenyl) ethers. Their straightforward synthesis and high reactivity in photoinitiated cationic polymerization make these monomers highly attractive for a variety of applications. Cationic polymerization rate studies showed that these monomers exhibited comparable reactivity to their related vinyl and 1-propenyl ether analogues. © 1995 John Wiley & Sons, Inc.     

Synthesis and cationic photopolymerization of new silicon‐containing oxetane monomers

The cationic photopolymerization of oxetane‐based systems containing silicon monomers was investigated. For this purpose, three new silicon‐containing oxetane monomers were synthesized through a simple and straightforward synthetic method. The silicon‐containing monomers were added to a typical oxetane resin, 3,3′‐[oxydi(methylene)]bis(3‐ethyloxetane), in concentrations of 1–5 wt %. They exploited a certain surface tension effect without affecting the rate of polymerization. Enrichment only on the air side was achieved, which induced hydrophobicity in the photocured films, depending on the monomer structure and concentration. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1415–1420, 2004     

Performance of amidocoumarins as probes for monitoring of cationic photopolymerization of monomers by fluorescence probe technology

The performance of 7‐benzamido‐4‐methylcoumarin ( B ) and 7‐acetamido‐4‐methylcoumarin ( C ) as fluorescent probes for monitoring of progress of cationic photopolymerization of monomers by fluorescence probe technology has been evaluated in comparison with 7‐diethylamino‐4‐methylcoumarin ( A ). It has been found that the probes B and C do not cause such a delay of the polymerization start as the probe A does, but in the case of B and C , the cure monitoring using the fluorescence intensity ratio at two wavelengths as an indicator of the polymerization progress is not applicable. An alternative monitoring parameter has been applied successfully and a method for compensation of the effects of probe photolysis is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of epoxy monomers that undergo synergistic photopolymerization by a radical‐induced cationic mechanism

A series of novel, cycloaliphatic, cationically photopolymerizable epoxide monomers bearing benzyl ether groups were prepared. These monomers display a considerable enhancement in the rate of their cationic ring‐opening polymerizations in comparison with monomers that do not contain such groups. In this article, a synergistic free‐radical mechanism is proposed that accounts for this effect, and supporting evidence is offered for its verification. During UV irradiation of an onium salt cationic photoinitiator, the aryl radicals that are generated abstract labile benzyl hydrogens present in such monomers to generate the corresponding carbon‐centered radicals. Subsequently, these radicals are oxidized to benzyl carbocations by the onium salt via a nonphotochemical chain process. The observed increase in the rate and extent of the cationic ring‐opening polymerization of the epoxide monomers is due to the aforementioned mechanism, which effectively increases the number of reactive cationic species present during polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3578–3592, 2001     

Synthesis and cationic photopolymerization of monomers based on nopol

Starting with nopol [(R)‐(−)‐2‐(2′‐hydroxyethyl)‐6,6‐dimethyl‐8‐oxatricyclo[3.1.1.1^2,3]octane, I] as a substrate, two new, interesting monomers, allyl nopol ether epoxide III and nopol 1‐propenyl ether epoxide IV, were prepared. The photoinitiated cationic polymerizations of these two monomers as well as several other model compounds were studied using real‐time infrared spectroscopy. Surprisingly, the rates of epoxide ring‐opening polymerization of both monomers were enhanced as compared to those of the model compounds. Two different mechanisms which involve the free radical induced decomposition of the diaryliodonium salt photoinitiator were proposed to explain the rate acceleration effects. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1199–1209, 1999     

Synthesis and characterization of side-chain liquid-crystalline poly(ether ester)s having p-substituted biphenyl mesogenic side groups

Several novel mesogenic spiro-orthoester monomers such as 1,6,10-trioxaspiro[4,5]decanes 4 , containing biphenyl mesogens at the C-8 positions of the five- and six-membered spirocyclic ring, through the alkylene spacers of different lengths were prepared by condensation reaction of the corresponding biphenyl mesogenic 1,3-propanediol 3 with 2,2-diethoxytetrahydrofuran, with 50–75% yields. Through cationic double ring-opening polymerization, carried out with boron trifluoride etherate as an initiator (5 mol % vs. monomer) in bulk at 150°C, spiro-orthoester monomers 4 afforded a novel class of side-chain thermotropic LC polymers with a poly(ether ester) as the main chain 8 . The liquid-crystalline properties of the spiro-orthoester monomers and the resulting polymers were examined by differential scanning calorimetry and optical polarized microscopy. Biphase separation was observed in the side-chain liquid-crystalline poly(ether ester)s upon annealing in the broad isotropic region. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2439–2455, 1998     

Cationic photopolymerization of alkyl glycidyl ethers

An investigation of the photoactivated cationic ring‐opening frontal polymerizations of a series of alkyl glycidyl ethers was carried out with the aid of a novel technique, optical pyrometry. With this technique, the effects of various experimental parameters, such as the photoinitiator type and concentration, as well as the effects of the monomer structure on the frontal behavior of these monomers were examined. Upon irradiation with UV light, the photopolymerizations of many alkyl glycidyl ethers displayed a prominent induction period at room temperature as the result of the formation of long‐lived, relatively stable secondary oxonium ions. The input of only a small amount of thermal activation energy was required to induce the further reaction of these species with the consequent autoaccelerated exothermic ring‐opening polymerization. Photoactivated frontal polymerizations were observed for both mono‐ and polyfunctional alkyl glycidyl ether monomers. The ability of monomers to exhibit frontal behavior was found to be related to their ability to stabilize the secondary oxonium ion intermediates through hydrogen‐bonding effects. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3036–3052, 2006     

Vinylcarbonates and vinylcarbamates: Biocompatible monomers for radical photopolymerization

The last decade has seen a remarkable interest in the use of biocompatible and biodegradable polymers as scaffolds for tissue engineering. The fabrication of 3D scaffolds by lithography‐based additive manufacturing technology (AMT) represents an appealing approach. As poly(lactic acid), the state of the art biocompatible and biodegradable material, cannot be processed by these photopolymerization‐based techniques, it has so far been necessary to use selected (meth)acrylates. By developing new photopolymers based on vinyl carbonates and vinyl carbamates as a reactive group we have been able to avoid most of the disadvantages of classical (meth)acrylate‐based photopolymers. The new generation of biocompatible monomers show low cytotoxicity, have good storage stability, and are sufficiently photoreactive to be structured by lithography based AMT. The mechanical properties and rates of degradation of the polymers can be easily tuned over a broad range. Degradation results in the formation of nonacidic and nontoxic degradation products of low molecular weight that can be easily transported within the human body. Initial in vivo tests showed significant osseointegration of the 3D cellular scaffolds and no signs of implant rejection. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A di‐tert‐butyl acrylate monomer for controlled radical photopolymerization

A new di‐tert‐butyl acrylate (diTBA) monomer for controlled radical polymerization is reported. This monomer complements the classical use of tert‐butyl acrylate (TBA) for synthesis of poly(acrylic acid) by increasing the density of carboxylic acids per repeat unit, while also increasing the flexibility of the carboxylic acid side‐chains. The monomer is well behaved under Cu(II)‐mediated photoinduced controlled radical polymerization and delivers polymers with excellent chain‐end fidelity at high monomer conversions. Importantly, this new diTBA monomer readily copolymerizes with TBA to further the potential for applications in areas such as dispersing agents and adsorbents. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 801–807     

Cationic photopolymerization of epoxynorbornane linseed oils: The effect of diluents

New epoxynorbornane linseed oils (ENLOs) were prepared as a function of the norbornene content. The cationic photopolymerization of ENLOs was investigated with real‐time infrared spectroscopy and photo‐differential scanning calorimetry. The effects of reactive and nonreactive diluents on the polymerization rate were also studied. The diluents reduced the viscosity of the formulations, markedly accelerated the rate of polymerization of ENLOs, and increased their final conversions. The effects of the reactive diluent were compared for ENLOs and epoxidized linseed oil. The relative reactivity of the oxiranes was not as important as the viscosity of the reacting system, and it was proposed that the cationic photopolymerization of ENLOs was controlled by diffusion. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3440–3456, 2003     

Synthesis and cationic photopolymerization of new fluorinated,polyfunctional propenyl ether oligomers

New fluorinated, polyfunctional propenyl ether functionalized resins were synthesized, and their behavior in cationic photopolymerization was investigated. The photopolymerization proceeded efficiently with a high double‐bond conversion (>90%), giving rise to UV‐cured coatings characterized by low glass‐transition temperatures (?33 °C ≤ glass‐transition temperature ≤ ?15 °C) and hydrophobic surface properties. A fluorinated additive was also employed as a reactive additive in the cationic photopolymerization of trimethylolpropane tripropenyl ether, increasing the double‐bond conversion, polymer network flexibility, thermal stability, and surface hydrophobicity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6943–6951, 2006     

Novel N‐methylbenzothiazolium salts as hardeners for epoxy and acrylate monomers

Novel N‐methylbenzothiazolium salts [N‐methyl‐2‐benzylthiobenzothiazolium, N‐methyl‐2‐(4‐nitrobenzylthio)benzothiazolium, N‐methyl‐2‐(1‐ethoxycarbonylethylthio)benzothiazolium, and N‐methyl‐2‐methylthiobenzothiazolium hexafluoroantimonates] were synthesized by the reaction of the corresponding 2‐substituted benzothiazole with dimethylsulfate, followed by anion exchange with KSbF₆. These benzothiazolium salts cationically polymerized an epoxy monomer by photoirradiation. They also polymerized an acrylate monomer via a photoradical process. The use of aromatic compounds such as 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers was effective in enhancing the polymerization. These benzothiazolium salts also served as thermal cationic initiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3828–3837, 2003     

Synthesis and photopolymerization of 1-propenyl glycidyl ether

The ambifunctional monomer, 1-propenyl glycidyl ether, was prepared from allyl glycidyl ether, by a ruthenium-catalyzed isomerization reaction in high yield. 1-Propenyl glycidyl ether undergoes facile photoinduced cationic polymerization to yield a crosslinked polymer. The structure of this polymer was studied using ¹H- and, ¹³C-NMR spectroscopies and employing well-characterized related polymers as models. The model polymers were prepared by the cationic polymerization of allyl glycidyl ether with BF₃OEt₂ followed by isomerization of the pendant allyl groups by a ruthenium catalyst. Subsequently, the resulting polyether-bearing pendant 1-propenyl ether groups was subjected to a diaryliodonium salt-photoinitiated polymerization. A comparison of the spectra of the polymers indicated the presence of cyclic acetal units in the polymer backbone. © 1994 John Wiley & Sons, Inc.     

Reactivity of oxetane monomers in photoinitiated cationic polymerization

Studies of the onium salt photoinitiated cationic ring‐opening polymerizations of various 3,3‐disubstituted oxetane monomers have been conducted with real‐time infrared spectroscopy and optical pyrometry. The polymerizations of these monomers are typified by an extended induction period that has been attributed to the presence of a long‐lived tertiary oxonium ion intermediate formed by the reaction of the initially formed secondary oxonium ion with the cyclic ether monomer. Because the extended induction period in the photopolymerization of these monomers renders oxetane monomers of limited value for many applications, methods have been sought for its minimization or elimination. Three general methods have been found effective in markedly shortening the induction period: (1) carrying out the photopolymerizations at higher temperatures, (2) copolymerizing with more reactive epoxide monomers, and (3) using free‐radical photoinitiators as synergists. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3205–3220, 2005     

Visible light photopolymerization: Synthesis of new fluorone dyes and photopolymerization of acrylic monomers using them

Several 3-alkoxy-5, 7-diiodo-6-fluorones (λ_max ≈ 470 nm) have been synthesized and evaluated as initiators for photopolymerization triggered with the 515.5 nm line of an Ar⁺ laser. 2-Acyl- and 2-alkyl-4,5,7-triiodo-3-hydroxy-6-fluorones were also tested at 515.5 nm. 9-Cyano-2-Acyl- and 9-cyano-2-alkyl-4,5,7-triiodo-3-hydroxy-6-fluorones were studied and could be excited with the 632 nm line of a He–Ne laser. Dyes with long linear carbon chain alkoxy groups at C-6 showed larger molar extinction coefficients and formed polymers with better mechanical properties than did compounds with shorter carbon chains, or did the corresponding C-6 phenols. The optimum side chain length of the C-6 ether alkyl group is between 4–7 carbon atoms. With longer carbon chain alkoxy groups at C-8, e.g., octyl, the mechanical properties of the formed polymers are inferior to systems formed with the butyl isomer as photoinitiator. In the case of alkoxy groups with branched alkyl groups (e.g., 2-ethylbutyl), the relationship between dye structure and the properties of the polymers formed is less straightforward. Though the dyes react from their triplet state, the fluorescence quantum yields of the dyes and the performance of the dyes as photoinitiators appear directly related. © 1995 John Wiley & Sons, Inc.     

Synthesis and solution properties of poly(vinyl ether)s with long alkyl chain,biphenyl, and cholesteryl pendants

The judicious choice of reaction conditions permitted living cationic polymerization of vinyl ethers with bulky and strongly interacting pendant groups, such as crystalline long alkyl chains and liquid crystalline mesogenic structures, using appropriate combinations of Lewis acids with added bases. Thus, well‐defined random and block copolymers with various pendants were also synthesized. Highly sensitive UCST‐type phase separation in various organic solvents was achieved employing crystallization of octadecyl pendants of homopolymers and random copolymers. This phase separation behavior is unusual for a polymer‐organic solvent system. Furthermore, thermally induced reversible physical gelation was conducted using this thermosensitive behavior. These specific pendants were very effective not only in organic media but also in water, in obtaining hydrogels with relatively low polymer concentrations. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4392–4406, 2008     

Synthesis and cationic photopolymerization of epoxy‐functional siloxane monomers and oligomers

A series of difunctional silicon‐containing monomers were prepared with a novel method consisting of the monohydrosilation of an α,ω‐difunctional Si? H‐terminated siloxane with a vinyl‐functional epoxide or oxetane followed by the dehydrodimerization of the resulting Si? H‐functional intermediate. This method used simple, readily available starting materials and could be conducted as a streamlined one‐pot, two‐step synthesis. This novel method was also applied to the synthesis of several epoxy–silicone oligomers. The reactivities of these new monomers and oligomers were examined with Fourier transform real‐time infrared spectroscopy and optical pyrometry. Those monomers containing epoxycyclohexyl groups displayed excellent reactivity in cationic ring‐opening polymerization in the presence of lipophilic onium salt photoinitiators. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3056–3073, 2003