Crowned polyacetylene. I. Synthesis and characterization of poly(4′-ethynylbenzo-15-crown-5)

4′-Ethynylbenzo-15-crown-5 ( EB15C5 ) polymerized with high yields in the presence of (bicyclo[2.2.1] hepta-2,5-diene) rhodium(I) chloride dimer and triethylamine as a cocatalyst in chloroform at 30°C. Common catalysts for the polymerization of substituted acetylenes, WCl₆ and MoCl₅, did not produce any polymer from EB15C5 . The structure of the main chain for poly(4′-ethynylbenzo-15-crown-5) ( PEB15C5 ) was determined to be predomi-nantly cis form, based upon the relatively sharp signals attributed to the main chain atoms that was observed in the ¹H and ¹³C NMR spectra. The cation-binding properties of PEB15C5 are very similar to that of poly(4′-vinylbenzo-15-crown-5), and the selectivity is in the order of K⁺> Rb⁺ ? Cs⁺ ? Na⁺, Li⁺. The electrical conductivity of PEB15C5 increased from 1.3 × 10^?10 to 1.3 × 10^?6 S. cm^?1, when the polymer was doped with iodine. © 1995 John Wiley & Sons, Inc.     

Proton Nuclear Magnetic Resonance Measurements of 2′-Aminodeoxyuridylyl-3′,5′-Deoxyuridine

A dideoxyribonucleotide, 2′-amino-2′-deoxyuridylyl 3′,5′-deoxyuridine, containing an unsual base (2′-amino-2′-deoxyuridine) that isresistant to nucleases was investigated by ′H NMR. The pK_a of the protonation of the amino group (5.8) was determined by profiles of chemical shifts of protons in the vicinity of amino group versus pH. However, protonation of the amino group has little effect on the conformation of the dimer, assumed to be B-form DNA. This conclusion is drawn from the chemical shift data and coupling constants of H₁-H₂. Thus, 2′-amino-2′-deoxyuridine can be used in antisense and anticode oligonucleotides.     

Preparation and physical properties of poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) films

To prepare thermally stable and high‐performance polymeric films, new solvent‐soluble aromatic polyamides with a carbamoyl pendant group, namely poly(4,4′‐diamino‐3′‐carbamoylbenzanilide terephthalamide) (p‐PDCBTA) and poly(4,4′‐diamino‐3′‐carbamoylbenzanilide isophthalamide) (m‐PDCBTA), were synthesized. The polymers were cyclized at around 200 to 350 °C to form quinazolone and benzoxazinone units along the polymer backbone. The decomposition onset temperatures of the cyclized m‐ and p‐PDCBTAs were 457 and 524 °C, respectively, lower than that of poly(p‐phenylene terephthalamide) (566 °C). For the p‐PDCBTA film drawn by 40% and heat‐treated, the tensile strength and Young's modulus were 421 MPa and 16.4 GPa, respectively. The film cyclized at 350 °C showed a storage modulus (E′) of 1 × 10¹¹ dyne/cm² (10 GPa) over the temperature range of room temperature to 400 °C. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 775–780, 2000     

Preparation of 3-(3′-,4′-Hydroxyphenyl)sydnones

3-(3′-,4′-Hydroxyphenyl)sydnones were prepared by dealkylation of 3-(3′-,4′-alkoxyphenyl)sydnones with concentrated sulfuric acid at room temperature in a range of 59 to 86% yield.     

Acid-Base Properties of the Ground and Excited States of Ruthenium(II) Tris(4′-methyl-2,2′-bipyridine-4-carboxylic Acid)

The acid dissociation constant, pK_a, for the ground and excited states of ruthenium tris(4′-methyl-2,2′-bipyridine-4-carboxylic acid) complex have been measured. The ground state pK_a obtained from the pH titration curve of the complex absorption at 454 nm was 2.5. The lifetimes of the excited-state for deprotonated and protonated ruthenium complexes are 595 and 150 ns, respectively. The excited-state pK_a* is obtained from the emission titration curve at 630 nm and corrected for the excited-state lifetime to be 4.2. The increase of 1.7 pH units in the acid dissociation constant in the excited-state indicates that the ligand is much more basic in the excited-state. This result confirms the MLCT assignment for the lowest electronic transition of [Ru(mbpyCOOH)₃]²⁺.     

Two Bulky Conjugated 4′‐(4‐Hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine‐based Layered Complexes: Synthesis,Structure, and Photocatalytic Hydrogen Evolution Activity

Two new layered complexes with the formulas of {[Cu(H₂O)(HL)₂Cl](NO₃)}_n ( 1 ) and {[Cu(H₂O)₂(HL)₂](NO₃)₂}_n ( 2 ) were solvothermally synthesized by the reactions of the bulky conjugated 4′‐(4‐hydroxyphenyl)‐4,2′:6′,4′′‐terpyridine ligand (HL) with different Cu^II salts, which were further used as photocatalysts to achieve hydrogen production from water splitting. Single‐crystal structural analyses reveal that both complexes feature coplanar (4 4) layers with different connection manners between the HL extended Z‐shaped chains. More interestingly, 1 possessing more negative conduction band potential and higher structural stability exhibits a large hydrogen production rate of 2.43 mmol · g^–1 · h^–1, which is four times higher than that of 2 . Thus, the Cu^II‐based coordination polymers modified by the bulky conjugated organic ligand can become potentially promising non‐Pt photocatalysts for hydrogen production from water splitting.     

Tissue distribution and metabolism of the putative cancer chemopreventive agent 3′,4′,5′‐trimethoxyflavonol (TMFol) in mice

3′,4′,5′‐Trimethoxyflavonol (TMFol) is a synthetic flavonol with preclinical cancer chemopreventive properties. The hypothesis was tested that, in mice, p.o. administration of TMFol results in measureable levels of the parent in target tissues. A single oral dose (240 mg/kg) was administered to mice (n = 4 per time point) with time points ranging from 5 to 1440 min. TMFol and its metabolites were identified and quantitated in all tissues by high‐performance liquid chromatography (HPLC). Plasma levels of TMFol were at the limit of quantification or below, although metabolites were identified. Peak levels of TMFol in the gastrointestinal tract and the prostate averaged 1671 ± 265 µg/g (5.3 µmol/g) and 6.0 ± 1.6 µg/g (18.4 nmol/g), and occurred 20 and 360 min post‐dose, respectively. The area under the tissue concentration–time curve (AUC) for TMFol was greater than those of the metabolites, indicating that TMFol is relatively metabolically stable. Micromolar TMFol levels are easily achieved in the prostate and gastrointestinal tract, suggesting that TMFol might exert chemopreventive efficacy at these tissue sites. Further investigations are warranted to elucidate the potential chemopreventive potency of TMFol. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Masking of Lewis acidity trends in the solid‐state structures of trichlorido‐ and tribromido(2,2′:6′,2′′‐terpyridine‐κ3N,N′,N′′)gallium(III)

The molecular structures of trichlorido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaCl₃(C₁₅H₁₁N₃)], and tribromido(2,2′:6′,2′′‐terpyridine‐κ³N,N′,N′′)gallium(III), [GaBr₃(C₁₅H₁₁N₃)], are isostructural, with the Ga^III atom displaying an octahedral geometry. It is shown that the Ga—N distances in the two complexes are the same within experimental error, in contrast to expected bond lengthening in the bromide complex due to the lower Lewis acidity of GaBr₃. Thus, masking of the Lewis acidity trends in the solid state is observed not only for complexes of group 13 metal halides with monodentate ligands but for complexes with the polydentate 2,2′:6′,2′′‐terpyridine donor as well.     

Interaction of dimethyltin(IV) dichloride with 5′‐IMP and 5′‐UMP

The formation constants of the species formed in the systems H⁺ + dimethyltin(IV) + 5′‐IMP and 5′‐UMP, H⁺ + 5′‐IMP and H⁺ + 5′‐UMP have been determined in aqueous solution in the pH range 1.5–9.5 at constant temperature (25 °C) and constant ionic strength (0.1 mol dm⁻³ NaClO₄), using spectrophotometric and potentiometric techniques. ¹H and ³¹P NMR investigations in aqueous solution confirmed the species formation. The precipitated complexes of IMP and UMP by Me₂Sn(IV)²⁺ at low pH values were characterized by elemental analysis and FTIR spectroscopy methods, the bonding sites of the ligands were determined and ruled out purine and pyrimidine moieties (N‐7 and N‐1 in IMP and N‐3 in UMP, respectively) while a bidentated coordination of the phosphate group is concluded in both cases. Finally, the experiments revealed the existence of complexes with trigonal bipyramidal structures that is in agreement with similar systems resulted previously. Copyright © 2008 John Wiley & Sons, Ltd.     

反相离子对色谱法分析3′, 5′反向寡核苷酸

3′,5′反向寡核苷酸是碱基组成和长度完全相同、碱基顺序相反的两个寡核苷酸序列。以三乙胺为离子对试剂,研究了缓冲液浓度(0.025～0.15 mol/L)、pH (5.0～6.8)、柱温(25～45 ℃)、流速(0.3～0.7 mL/min)以及不同初始洗脱强度和洗脱梯度条件下,6个3′,5′反向寡核苷酸模拟样品保留和分离的变化特点。三组反向序列在缓冲液浓度为0.05 mol/L,pH 6.8和流速0.4 mL/min条件下获得最大分离,温度对分离的影响不大,而初始洗脱强度对反向序列的影响远大于洗脱梯度。实验结果表明3′,5′反向寡核苷酸的分离和保留趋势不完全一致,色谱条件的优化应有利于实现样品在柱上的弱保留。研究结果还显示寡核苷酸序列中5′末端的保留强于3′末端。     

Synthesis and characterization of di‐n‐butyltin(IV) complexes with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids: X‐ray crystal structures of [{(n‐C4H9)2Sn(OCOC12H8NO2−4′)}2O]2 and (n‐C4H9)2Sn{OCOC12H8NO2−4′}2

Reactions of di‐n‐butyltin(IV) oxide with 4′/2′‐nitrobiphenyl‐2‐carboxylic acids in 1 : 1 and 1 : 2 stoichiometry yield complexes [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)}₂O]₂ ( 1 and 2 ) and (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′/2′)₂ ( 3 and 4 ) respectively. These compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C and ¹¹⁹Sn) spectroscopy. The IR spectra of these compounds indicate the presence of anisobidentate carboxylate groups and non‐linear C? Sn? C bonds. From the chemical shifts δ (¹¹⁹Sn) and the coupling constants ¹J(¹³C, ¹¹⁹Sn), the coordination number of the tin atom and the geometry of its coordination sphere have been suggested. [{(n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)}₂O]₂ ( 1 ) exhibits a dimeric structure containing distannoxane units with two types of tin atom with essentially identical geometry. To a first approximation, the tin atoms appear to be pentacoordinated with distorted trigonal bipyramidal geometry. However, each type of tin atom is further subjected to a sixth weaker interaction and may be described as having a capped trigonal bipyramidal structure. The diffraction study of the complex (n‐C₄H₉)₂Sn(OCOC₁₂H₈NO₂?4′)₂ ( 3 ) shows a six–coordinate tin in a distorted octahedral frame containing bidentate asymmetric chelating carboxylate groups, with the n‐Bu groups trans to each other. The n‐Bu? Sn? n‐Bu angle is 152.8° and the Sn? O distances are 2.108(4) and 2.493(5) Å. The oxygen atom of the nitro group of the ligand does not participate in bonding to the tin atom in 1 and 3 . Crystals of 1 are triclinic with space group P1 and of that of 3 have orthorhombic space group Pnna. Copyright © 2003 John Wiley & Sons, Ltd.     

Density functional theory study of a molecular allosteric switch for 2,2′‐bipyridyl‐3,3′‐15‐crown‐5

A classical model of “molecular machine,” which acts as an ON–OFF switch for 2,2′‐bipyridyl‐3,3′‐15‐crown‐5 ( L ), has been theoretically studied. It is highly important to understand the mechanism of this switch. The alkali‐metal cations (Na⁺ and K⁺) and W(CO)₄ fragment are introduced to coordinate with the different active sites of L , respectively. The density functional theory (DFT) method is used for understanding the stereochemical structural natures and thermodynamic properties of all the target molecules at B3LYP/6‐31G(d) and SDD (Stuttgart–Dresden) level, together with the corresponding effective core potential (ECP) for tungsten (W). The fully optimized geometries have been performed with real frequencies, which indicate the minima states. The nucleophilicity of L has been investigated by the Fukui functions. The natural bond orbital analysis is used to study the intermolecular charge‐transfer interactions and explore the origin of the internal forces of the molecular switch. In addition, the binding energies, enthalpies, Gibbs free energies, and the cation exchange energies have been studied for L , W(CO)₄ L , and their corresponding complexes. The properties of the complexes displayed by in presence or absence of the W(CO)₄ fragment are also analyzed. The calculated results of allosterism displayed by L are in a good agreement with the experimental results. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011     

Synthesis and anti-inflammatory-analgesic activity of 2′,4′-difluoro-3-（carbamoyl）biphenyl-4-yl benzoates

Eighteen 2′,4′-difluoro-3-（carbamoyl）biphenyl-4-yl benzoates were synthesized from diflunisal in three steps with total yields from 72% to 86%. All compounds were identified by IR, 1^H NMR, MS and elemental analysis. The anti-inflammatory activity and analgesic activity for 18 compounds were evaluated. The preliminary assay results showed that compounds 4a and 4p exhibited potent anti-inflammatory-analgesic activity.     

Synthesis and properties of poly(amide-imide)s based on the diimide-diacid condensed from 2,2′- bis(4-aminophenoxy)biphenyl and trimellitic anhydride

A new dicarboxylic acid having a kinked structure was synthesized from the condensation of 2,2′-bis(4-aminophenoxy)biphenyl and trimellitic anhydride. A series of biphenyl-2,2′-diyl-containing aromatic poly(amide-imide)s having inherent viscosities of 0.23–0.94 dL/g was prepared by the triphenyl phosphite activated polycondensation from the diimide-diacid II with various aromatic diamines in a medium consisting of N-methyl-2-pyrrolidone (NMP), pyridine, and calcium chloride. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents including NMP and N,N-dimethylacetamide (DMAc). Transparent, flexible, and tough films of these polymers could be cast from DMAc or NMP solutions. The glass transition temperatures of these polymers were in the range of 227–261°C and the 10% weight loss temperatures were above 520°C in nitrogen. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1169–1177, 1998     

Synthesis and characterization of poly(β‐hydroxybutyrate) and poly(ϵ‐caprolactone) copolyester by transesterification

To synthesize the copolyester of poly(β‐hydroxybutyrate) (PHB) and poly(?‐caprolactone) (PCL), the transesterification of PHB and PCL was carried out in the liquid phase with stannous octoate as the catalyzer. The effects of reaction conditions on the transesterification, including catalyzer concentration, reaction temperature, and reaction time, were investigated. The results showed that both rising reaction temperature and increasing reaction time were advantageous to the transesterification. The sequence distribution, thermal behavior, and thermal stability of the copolyesters were investigated by ¹³C NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, wide‐angle X‐ray diffraction, optical microscopy, and thermogravimetric analysis. The transesterification of PHB and PCL was confirmed to produce the block copolymers. With an increasing PCL content in the copolyesters, the thermal behavior of the copolyesters changed evidently. However, the introduction of PCL segments into PHB chains did not affect its crystalline structure. Moreover, thermal stability of the copolyesters was little improved in air as compared with that of pure PHB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1893–1903, 2002     

Study of complexation of phenylaza-15-crwon-5, 4-nitrobenzo- 15-crown-5, and benzo-15-crown-5 with Ag+, Tl+ and Pb2+ ions in methanol by competitive potentiometry

The complexation reaction of phenylaza-15-crwon-5, 4- nitrobenzo- 15-crown-5, and benzo-15-crown-5 with Ag⁺, Tl⁺ and Pb²⁺ ions in methanol solution have been studied by a competitive potentiometric method. The Ag⁺/Ag electrode used both as an indicator and reference electrode in a concentration cell. The emf of cell monitored as the crown ethers concentration varies through the titration. The stoichiometry and stability constants of resulting complexes have been evaluated by MINIQUAD. The stoichiometry for all resulting complexes was 1:1. The stability of these metal ions with derivatives of 15-crown-5 are in order phenylaza-15-crown-5 > Benzo-15-crown-5 > 4-nitrobenzo-15-crown-5, and for the each used crown ethers are as Pb²⁺ > Ag⁺ > Tl⁺. The effect of the substituted group on the stability of resulting complexes was considered. The obtained results are novel and interesting.     

Structural and theoretical characterization of a new twisted 4′‐substituted terpyridine compound: 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine

4′‐Substituted derivatives of 2,2′:6′,2′′‐terpyridine with N‐containing heteroaromatic substituents, such as pyridyl groups, might be able to coordinate metal centres through the extra N‐donor atom, in addition to the chelating terpyridine N atoms. The incorporation of these peripheral N‐donor sites would also allow for the diversification of the types of noncovalent interactions present, such as hydrogen bonding and π–π stacking. The title compound, C₂₄H₁₆N₄, consists of a 2,2′:6′,2′′‐terpyridine nucleus (tpy), with a pendant isoquinoline group (isq) bound at the central pyridine (py) ring. The tpy nucleus deviates slightly from planarity, with interplanar angles between the lateral and central py rings in the range 2.24 (7)–7.90 (7)°, while the isq group is rotated significantly [by 46.57 (6)°] out of this planar scheme, associated with a short H_tpy…H_isq contact of 2.32 Å. There are no strong noncovalent interactions in the structure, the main ones being of the π–π and C—H…π types, giving rise to columnar arrays along [001], further linked by C—H…N hydrogen bonds into a three‐dimensional supramolecular structure. An Atoms In Molecules (AIM) analysis of the noncovalent interactions provided illuminating results, and while confirming the bonding character for all those interactions unquestionable from a geometrical point of view, it also provided answers for some cases where geometric parameters are not informative, in particular, the short H_tpy…H_isq contact of 2.32 Å to which AIM ascribed an attractive character.     

Novel Amphiphilic Degradable Poly(ε‐caprolactone)‐graft‐poly(4‐vinyl pyridine), Poly(ε‐caprolactone)‐graft‐poly(dimethylaminoethyl methacrylate) and Water‐Soluble Derivatives

New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.

     

One‐dimensional CuII coordination polymers containing C2h‐symmetric 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate linkers

Two new one‐dimensional Cu^II coordination polymers (CPs) containing the C_2h‐symmetric terphenyl‐based dicarboxylate linker 1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylate (3,3′‐TPDC), namely catena‐poly[[bis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ⁴O,O′:O′′:O′′′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂]·H₂O}_n, (I), and catena‐poly[[aquabis(dimethylamine‐κN)copper(II)]‐μ‐1,1′:4′,1′′‐terphenyl‐3,3′‐dicarboxylato‐κ²O³:O^3′] monohydrate], {[Cu(C₂₀H₁₂O₄)(C₂H₇N)₂(H₂O)]·H₂O}_n, (II), were both obtained from two different methods of preparation: one reaction was performed in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) as a potential pillar ligand and the other was carried out in the absence of the DABCO pillar. Both reactions afforded crystals of different colours, i.e. violet plates for (I) and blue needles for (II), both of which were analysed by X‐ray crystallography. The 3,3′‐TPDC bridging ligands coordinate the Cu^II ions in asymmetric chelating modes in (I) and in monodenate binding modes in (II), forming one‐dimensional chains in each case. Both coordination polymers contain two coordinated dimethylamine ligands in mutually trans positions, and there is an additional aqua ligand in (II). The solvent water molecules are involved in hydrogen bonds between the one‐dimensional coordination polymer chains, forming a two‐dimensional network in (I) and a three‐dimensional network in (II).