Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

Kinetics of cationic photopolymerizations of divinyl ethers characterized using in situ Raman spectroscopy

In situ Raman spectroscopy experiments were used to determine effective kinetic propagation constants for a series of unsteady-state divinyl ether polymerizations at different isothermal temperatures and light intensities. Raman spectroscopy was found to be ideally suited for monitoring cationic photopolymerizations because the technique allows isothermal experiments to be performed with excellent time resolution and allows several spectral features to be observed simultaneously. In addition, the Raman experiments provided direct information about the vinyl bond concentration in situ as the reaction takes place. For these cationic photopolymerizations, the reaction rate and limiting conversion were both found to increase as the reaction temperature was increased. At all temperatures, the profile for the propagation rate constant, k_p, exhibited a dramatic increase at the start of the reaction, plateaued at a value between 10 and 40 l/mol s (depending upon temperature), and then decreased as the reaction reached a limiting conversion due to trapping of the active centers. Finally, the overall activation energy for polymerization was found to be 25.1 ± 6.1 kJ/mol. © 1996 John Wiley & Sons, Inc.     

Photocationic and radical polymerizations of epoxides and acrylates by novel sulfonium salts

Novel sulfonium salts [methyl‐, 2‐indany‐, or 1‐ethoxycarbonylethyl methyl‐2‐naphthylsulfonium hexafluorophosphate and 2‐indany‐, 1‐ethoxycarbonylethyl‐, 2‐methyl‐2‐phenylpropyl‐, 2‐phenylpropyl‐, 2‐phenylethyl‐, 2‐(4‐methoxyphenyl)‐ethyl‐, or 3‐(4‐methoxyphenyl)‐2‐propyl methylphenylsulfonium hexafluorophosphates] were synthesized by the reaction of dimethylsulfate and the corresponding sulfides followed by anion exchange with KPF₆. These sulfonium salts could polymerize epoxy monomers at lower temperatures than previously reported for benzylsulfonium salt initiators. In particular, sulfonium salts with naphthyl groups showed higher photoactivity than already reported for di(4‐tert‐butylphenyl)iodonium and triphenylsulfonium hexafluorophosphates. These sulfonium salts showed higher activity in photoradical polymerization and photocationic polymerization. The photopolymerization was accelerated by the addition of 4‐methoxy‐1‐naphthol, N‐ethylcarbazole, 2,4‐dimethylthioxanthone, phenothiazine, and 2‐ethyl‐9,10‐dimethoxyanthracene as photosensitizers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3816–3827, 2003     

Synthesis and study of novel polyol‐bound photosensitizers for cationic UV‐curable systems

Novel cationic intramolecular hydrogen abstraction photosensitizers (IHA‐PSs) based on a proposed intramolecular hydrogen abstraction photosensitization (IHAP) mechanism were synthesized and found to have a pronounced photosensitization effect in cycloaliphatic epoxide based cationic UV‐curable systems using sulfonium salt photoinitiators. A series of polyol‐based photosensitizers were synthesized with naphthalene attached. One photosensitizer, P‐Na, was found to have a more pronounced photosensitization effect in three different formulation systems, as revealed by real‐time Fourier transform infrared and differential photocalorimetry experiments. Such a phenomenon can be explained by a proposed facile IHAP mechanism, which is possible only with the unique molecular structure of P‐Na. The effect of P‐Na was further confirmed by comparison with two non‐polyol‐type photosensitizers. A designed IHA‐PS molecule was synthesized with the proposed principles ofthe IHAP mechanism, and it achieved a photosensitization effect similar to that of P‐Na with a much lower molecular weight and fewer hydroxyl groups per molecule. This further validated the proposed IHAP mechanism. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4435–4449, 2006     

Modification of photoinitiated cationic epoxide polymerizations by sulfides

The addition of sulfides has a marked effect on the rates of onium salt induced photoinitiated cationic ring‐opening polymerizations of epoxide monomers. Various behaviors have been observed that depend on the structure of the sulfide. Dialkyl sulfides strongly inhibit the photopolymerizations of these monomers, whereas diaryl sulfides have a retarding effect on the photopolymerizations. Real‐time infrared spectroscopy and optical pyrometry have been employed as analytical methods to probe the kinetic effects of the addition of a variety of sulfides on cationic epoxide ring‐opening photopolymerizations. A mechanism is proposed that involves the formation of sulfonium salts as intermediates. The observations made in this study have important implications for cationic photopolymerizations in general and for photoinitiated cationic ring‐opening polymerizations of epoxides in particular. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2504–2519, 2005     

Gel formation in cationic polymerization of divinyl ethers. I. 1,4-Bis(2-vinyloxyethoxy)benzene

Polymerization of 1,4-bis(2-vinyloxyethoxy)benzene (CH₂C O CH₂ CH₂ O C₆H₄ O CH₂CH₂ O CCH₂; 1 ) was investigated in CH₂Cl₂ at 0°C with the use of a variety of cationic initiators. SnCl₄, SnBr₄, AlEtCl₂, and BF₃OEt₂ (strong Lewis acids) and CF₃SO₃H (a strong protonic acid) yielded crosslinked insoluble polymers immediately after the polymerizations were initiated. The binary initiating systems such as HCl/ZnCl₂ and (C₆H₅O)₂P(O)OH/ZnCl₂ also produced insoluble poly( 1 )s. At the low initial concentration of ZnCl₂, however, the (C₆H₅O)₂P(O)OH/ZnCl₂ system gave the soluble polymers quantitatively, and gelation occurred only when the reaction mixture was stored for a long time after complete consumption of the monomer. The content of the unreacted pendant vinyl ether groups of the soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble polymer obtained at 100% monomer conversion; this may be ascribed to frequent occurrence of intramolecular crosslinking. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 675–683, 1998     

Gel formation in cationic polymerization of divinyl ethers. II. 2,2-Bis{4-[(2-vinyloxy)ethoxy]phenyl}propane

Cationic polymerization of 2,2-bis{4-[(2-vinyloxy)ethoxy]phenyl}propane [CH₂CH O CH₂CH₂O C₆H₄ C(CH₃)₂ C₆H₄ OCH₂CH₂ O CHCH₂; 2], a divinyl ether with oxyethylene units adjacent to the polymerizable vinyl ether groups and a bulky central spacer, was investigated in CH₂Cl₂ at 0°C with the diphenyl phosphate [(C₆H₅O)₂P(O)OH]/zinc chloride (ZnCl₂) initiating system. The polymerization proceeded quantitatively and gave soluble polymers up to 85% monomer conversion. In the same fashion as the polymerization of 1,4-bis[2-vinyloxy(ethoxy)]benzene (CH₂CH O CH₂CH₂O C₆H₄ OCH₂CH₂ O CHCH₂; 1) that we already studied, the content of the unreacted pendant vinyl ether groups of the produced soluble polymers decreased with monomer conversion, and almost all the pendant vinyl ether groups were consumed in the soluble products prior to gelation. Alternatively, endo-type double bonds were gradually formed in the polymer main chains by chain transfer reactions and other side reactions as the polymerization proceeded. The polymerization behavior of isobutyl vinyl ether (3), a monofunctional vinyl ether, under the same conditions, showed that the endo-type olefins in the polymer backbones are of no polymerization ability with the growing active species involved in the present polymerization systems. These results indicate that the intermolecular crosslinking reactions occurred primarily by the pendant vinyl ether groups, and the final stage of crosslinking process leading to gelation also may occur by the small amount of the residual pendant vinyl ether groups (supposedly less than 2%). The formation of the soluble polymers that almost lack the unreacted pendant vinyl ether groups is most likely due to the frequent occurrence of intramolecular crosslinking reactions. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1931–1941, 1999     

Synthesis and cationic photopolymerization of new fluorinated,polyfunctional propenyl ether oligomers

New fluorinated, polyfunctional propenyl ether functionalized resins were synthesized, and their behavior in cationic photopolymerization was investigated. The photopolymerization proceeded efficiently with a high double‐bond conversion (>90%), giving rise to UV‐cured coatings characterized by low glass‐transition temperatures (?33 °C ≤ glass‐transition temperature ≤ ?15 °C) and hydrophobic surface properties. A fluorinated additive was also employed as a reactive additive in the cationic photopolymerization of trimethylolpropane tripropenyl ether, increasing the double‐bond conversion, polymer network flexibility, thermal stability, and surface hydrophobicity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6943–6951, 2006     

Performance of amidocoumarins as probes for monitoring of cationic photopolymerization of monomers by fluorescence probe technology

The performance of 7‐benzamido‐4‐methylcoumarin ( B ) and 7‐acetamido‐4‐methylcoumarin ( C ) as fluorescent probes for monitoring of progress of cationic photopolymerization of monomers by fluorescence probe technology has been evaluated in comparison with 7‐diethylamino‐4‐methylcoumarin ( A ). It has been found that the probes B and C do not cause such a delay of the polymerization start as the probe A does, but in the case of B and C , the cure monitoring using the fluorescence intensity ratio at two wavelengths as an indicator of the polymerization progress is not applicable. An alternative monitoring parameter has been applied successfully and a method for compensation of the effects of probe photolysis is proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Effect of central spacer chain structure on cationic cyclopolymerization tendency of divinyl ethers

To clarify the effects of the central spacer chain structure of divinyl ethers on their cationic cyclopolymerization tendencies, 1,4‐bis[(2‐vinyloxy)ethoxy]benzene ( 1 ), 1,4‐bis[(2‐vinyloxy)ethoxy]butane ( 2 ), 1,6‐bis[(2‐vinyloxy)ethoxy]hexane ( 3 ), 1,8‐bis[(2‐vinyloxy)ethoxy]octane ( 4 ), and 1,4‐bis[(4‐vinyloxy)butoxy]butane ( 5 ) were polymerized with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at 0 °C at low initial monomer concentration ([M]₀ = 0.15 M). The polymerizations of divinyl ethers 2 and 3 gave soluble polymers quantitatively. In contrast, the polymerizations of divinyl ethers 1 , 4 , and 5 underwent gel formation at high monomer conversion. The content of the unreacted vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. Judging from the relatively low vinyl contents of the polymers produced even in the early stage of the polymerization (monomer conversion < ～20%), the cyclopolymerization occurred to some extent for 2 , 3 , and 4 . On the contrary, the polymers produced from 1 and 5 exhibited the relatively high vinyl content, indicating that the cyclopolymerization tendencies of 1 and 5 were lower than those of 2 , 3 , and 4 . These results are discussed in terms of the structural variety of the spacer chains: (1) the presence of benzene ring ( 1 vs 2 ), (2) their length ( 2 vs 3 and 4 ), and (3) the position of ether oxygen ( 4 vs 5 ). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4002–4012, 2002     

Photoinduced cationic ring‐opening frontal polymerizations of oxetanes and oxiranes

The photoinitiated cationic ring‐opening polymerizations of certain epoxides and 3,3‐disubstituted oxetanes display the characteristics of frontal polymerizations. When irradiated with UV light, these monomers display a marked induction period, during which little conversion of the monomer to the polymer takes place. The local application of heat to an irradiated monomer sample results in polymerization that occurs as a front propagating rapidly throughout the entire reaction mass. For the characterization of these frontal polymerizations, the use of a new monitoring technique, employing optical pyrometry, has been instituted. This method provides a simple, rapid means of following these fast polymerizations and quantitatively determining their frontal velocities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1630–1646, 2004     

Near‐infrared spectroscopy investigation of water effects on the cationic photopolymerization of vinyl ether systems

Real‐time Fourier transform near‐infrared spectroscopy has been used to monitor monomer and water concentrations simultaneously during cationic vinyl ether photopolymerization. The use of near‐infrared peak area methods allows the water content to be conveniently and nondestructively determined in any monomer or polymer for which the water peak has previously been calibrated by gravimetric analysis. Although the shape of the absorption band due to absorbed water in a monomer changes with the quantity of water, the integrated intensity from about 5350 to 4900 cm^?1 can be correlated directly to the water concentration, and this region is well removed from the vinyl‐based absorption at approximately 6190 cm^?1. This approach provides a highly informative, dynamic technique for examining the influence of moisture on polymerization reactions. Significant differences have been observed in the effects of absorbed water on the cationic photopolymerization kinetics of vinyl ether monomers with or without an ? OH group. Along with the rapid consumption of water coupled to vinyl ether polymerization, acid‐catalyzed hydrolysis reactions have also been spectroscopically observed, giving rise to the formation of aldehyde groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1985–1998, 2004     

Photo‐Induced Cross‐Linking of Divinyl Ethers by Using Diphenyliodonium Salts With Highly Nucleophilic Counter Anions in the Presence of Zinc Halides

This study describes the use of diphenyliodonium salts with highly nucleophilic counter anions to photoinitiate the cationic cross‐linking of divinyl ethers. Both direct and indirect initiating modes are used. In the direct acting system, only a diphenyliodonium salt with a highly nucleophilic counter anion and a zinc halide are employed as initiator and activator, respectively. In the indirect systems, in addition to direct system components, photosensitive additives such as anthrecene, perylene, 2,2‐dimethoxy‐2‐phenyl acetophenone, benzophenone, and thioxanthone, which absorb the energy of the incident light and activate the iodonium salt, are used to initiate polymerization. All systems employed in this study initiated quite vigorous polymerizations.

     

Propenyl ethers. II. Study of the photoinitiated cationic polymerization of propenyl ether monomers

The results of studies of the photoinitiated cationic polymerization of mono-, di-, and multifunctional propenyl ethers are reported in this article. Real-time infrared spectroscopy and differential scanning photocalorimetry were used to determine the reactivity of the monomers with respect to each other and in relation to other types of cationically polymerizable monomers. Propenyl ethers were observed to be highly reactive monomers in photoinitiated cationic polymerization undergoing very high conversions to polymer at very short irradiation times. Attempts were also made to correlate the structures of these monomers with their reactivity as well as to examine the effects of various experimental parameters on their photopolymerization. © 1993 John Wiley & Sons, Inc.     

Fluorescence quenching of anthracene by N,N-diethylaniline in the O/W microemulsion

Photoinduced electron-transfer system of anthracene-N,N-di-ethylaniline (DEA) was studied in the oil in water (O/W) mi-croemulsions formed by SDS (sodium dodecyl sulfate),BA (benzyl alcohol) and H2O.The time-resolved fluorescence study showed that the fluorescence quenching of the excited anthracene by DEA occurs at the interface of the O/W mi-croemulsions.Besides as the quencher of the excited anthracene,N,N-diethylaniline could act as a cosurfactant to change the structures of the microemulsions,just as BA did.The quenching rate constants for the different structures of the system were determined.     

Synthesis and cationic photopolymerization of 1-butenyl ether monomers

A new series of cationically polymerizable mono-, di- and multifunctional 1-butenyl ether monomers have been prepared in high yields by the ruthenium catalyzed isomerization of the corresponding crotyl (2-butenyl) ethers. Their straightforward synthesis and high reactivity in photoinitiated cationic polymerization make these monomers highly attractive for a variety of applications. Cationic polymerization rate studies showed that these monomers exhibited comparable reactivity to their related vinyl and 1-propenyl ether analogues. © 1995 John Wiley & Sons, Inc.     

Visible‐light‐sensitive photoredox catalysis by iron complexes: Applications in cationic and radical polymerization reactions

The development of iron complexes for the photoredox catalysis is a huge challenge. Indeed, Iron complexes can be ideal candidates due to their potential visible light absorption and redox properties but also because they are less toxic, inexpensive and environmentally friendly compared to other catalysts. In the present paper, a series of novel iron complexes have been synthesized and utilized to initiate the free radical promoted cationic polymerization of epoxides or the free radical polymerization of acrylates through photoredox catalysis processes upon exposure to near UV (385 nm) or visible violet (405 nm) light emitting diodes (LEDs). When combined with an iodonium salt and N‐vinylcarbazole, the iron complex‐based photoinitiating systems are able to generate radicals, cations, and radical cations. The initiation efficiency is investigated through real‐time Fourier transform infrared spectroscopy and a satisfactory initiating ability is found. The mechanisms for the generation of the reactive initiating species through photoredox catalysis are studied by different methods (steady state photolysis, cyclic voltammetry and electron spin resonance spin trapping techniques) and discussed in detail. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2247–2253     

Photosensitization of carbazole derivatives in cationic polymerization with a novel sensitivity to near‐UV light

Photosensitizers based on the carbazole structure were designed and developed for cationic polymerization. Along with triarylsulfonium and diaryliodonium salts, the carbazole derivatives showed a high photosensitization effect in the cationic photopolymerization of epoxides. The photophysical properties of the carbazole derivatives were studied in terms of electronic absorption, fluorescence, and phosphorescence spectrometry. Moreover, a unique photosensitization mechanism of the carbazole derivatives was discussed after studies of the fluorescence quenching, redox behavior, and kinetics of the photopolymerization by time‐resolved fluorescence spectrometry, cyclic voltammetry, and photo differential scanning calorimetry, respectively. The results confirmed the redox photosensitization of the carbazole derivatives in cationic polymerization. The photosensitization of the carbazole and its ring or N‐alkylated derivatives occurred predominantly in singlet excited states at the rate of the diffusion limit, whereas the carbazole derivatives with carbonyl substituents sensitized onium salts via triplet excited states on the basis of the Rehm–Weller equation in the photoinduced electron‐transfer process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 90–100, 2000     

Novel photocurable monomers: The synthesis of difunctional vinyl ethers with a phosphonate group and difunctional 1‐propenyl ethers with a phosphonate group and their photoinitiated cationic polymerization

Phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were prepared by the regioselective addition reaction of glycidyl vinyl ether (GVE) or 1‐propenyl glycidyl ether with diaryl phosphonates with quaternary onium salts as catalysts. The reaction of GVE with bis(4‐chlorophenyl) phenylphosphonate gave bis[1‐(4‐chlorophenoxy methyl)‐2‐(vinyloxy)ethyl]phenylphosphonate in a 68% yield. The structures of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were confirmed by IR and ¹H NMR spectra and elemental analysis. Photoinitiated cationic polymerizations of the resulting phosphorus‐containing vinyl ether monomers and 1‐propenyl ether monomers were investigated with photoacid generators. The polymerization of vinyl ether groups and 1‐propenyl ether groups of the obtained monomers proceeded very smoothly with a sulfonium‐type cationic photoinitiator, bis[4‐(diphenylsulfonio)phenyl]sulfide‐bis(hexafluorophosphate), upon UV irradiation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3105–3115, 2005     

Gel formation in cationic polymerization of divinyl ethers. III. Effect of oligooxyethylene chain versus oligomethylene chain as central spacer units

Cationic polymerizations of two series of divinyl ethers were carried out to clarify the effects of their central spacer chain structure on their crosslinking polymerization behavior. One series of the monomers involves divinyl ethers with an oligooxyethylene central spacer chain: diethylene glycol divinyl ether ( O‐3 ), triethylene glycol divinyl ether ( O‐4 ), tetraethylene glycol divinyl ether ( O‐5 ), pentaethylene glycol divinyl ether ( O‐6 ), and heptaethylene glycol divinyl ether ( O‐8 ) (see Scheme 1 ). The other series includes divinyl ethers with an oligomethylene central spacer chain: 1,4‐butanediol divinyl ether ( C‐4 ), 1,6‐hexanediol divinyl ether ( C‐6 ), and 1,8‐octanediol divinyl ether ( C‐8 ). Cationic polymerizations of these monomers were carried out with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in methylene chloride (CH₂Cl₂) at ?30 °C ([Monomer]₀ = 0.15 M; [HCl]₀ = 5.0 mM; [ZnCl₂]₀ = 0.5 mM). The polymerizations of the oligomethylene‐based divinyl ethers C‐6 and C‐8 caused gel formation at high monomer conversions (～90%), whereas C‐4 formed soluble polymers even at almost 100% monomer conversion. The oligooxyethylene‐based divinyl ethers O‐3 , O‐4 , O‐5 , and O‐6 underwent gel‐free polymerizations up to 100% monomer conversion and O‐8 did so at least up to ～80% conversion. The content of unreacted pendant vinyl groups of the obtained soluble polymers was measured by ¹H NMR spectroscopy. In the polymerizations of the oligomethylene‐based divinyl ethers ( C‐4 , C‐6 , and C‐8 ), the vinyl contents of the polymers decreased monotonously with increasing monomer conversion, and their number‐average molecular weights (M_n's) and polydispersity ratios (M_w/M_n's) increased considerably just before the gelation occurred. On the contrary, the vinyl contents of the polymers obtained from the oligooxyethylene‐based divinyl ethers ( O‐3 , O‐4 , O‐5 , O‐6 , and O‐8 ) decreased steeply even in the early stage of the polymerizations and almost all the pendant vinyl ether groups were consumed in the soluble polymers at the final stage of the polymerizations. The oligooxyethylene spacer units adjacent to the pendant unreacted vinyl ether groups may solvate intramolecularly with the carbocationic active center to accelerate frequent occurrence of intramolecular crosslinking reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3729–3738, 2004