Synthesis of highly fluorescent materials: Isoindole-containing polymers

A series of stable, highly fluorescent and highly phenylated isoindoles have been synthesized by treating the respective o-dibenzoylbenzenes with anilines at 200°C in the presence of a catalytic amount of p-toluenesulfonic acid. The correlation between the emission frequences and the structures of the isoindoles is described. The same reaction has also been used to transform a series of poly(o-dibenzoylbenzene)s into poly(isoindole)s. The resulting polymers have been studied by ¹H-NMR, DSC, TGA, and fluorescence spectra. They are highly fluorescent materials with high molecular weights, high glass transition temperatures, and high thermal stabilities. The tetraphenyl substituted isoindole-containing polymers have a maximum emission around 468 nm, whereas the diphenyl substituted isoindole-containing polymers have their maximum emission around 486 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3293–3299, 1999     

Model studies on the structure of poly(amide oxime)s and their cyclodehydration reactions leading to poly(1,2,4-oxadiazole)s

To obtain an understanding of the low molecular weight character of wholly aromatic poly(1,4-arylene acyldiamide oxime)s (PAAs) having n-alkyloxymethyl side braches and the additional decrease in molecular weight during their cyclodehydration reaction leading to the corresponding poly(1,4-arylene-1,2,4-oxadiazole)s (PAOs), tautomeric structures of poly[1,4-phenylene-2,5-bis(n-octyloxymethyl)terephthaldiamide oxime] (C₈-PAA) were ¹H-NMR-spectroscopically investigated by using two model compounds: O,O'-dibenzoyl terephthaldiamide oxime (H-PAA-M, 4) and O,O'-dibenzoyl-2,5-bis(n-octyloxymethyl) terephthaldiamide oxime (C₈-PAA-M, 5). In solution H-PAA-M existed exclusively as oximino isomer, while C₈-PAA-M consisted only of imino tautomer and C₈-PAA contained both the oximino and imino form, the former being dominant in composition. It was found that the presence of imino tautomer caused serious effects both on the low molecular weight character of C₈-PAA and on the additional decrease in molecular weight during thermal cyclodehydration to C₈-PAO, whereas the presence of oximino tautomer showed practically little effect. A discussion on the results is provided from mechanistic viewpoint. © 1993 John Wiley & Sons, Inc.     

Synthesis,characterization, and blends of high temperature poly(arylether sulfone)s

The preparation of poly(4-oxy-1,4-phenylenesulfonyl-4,4′-biphenylene-4-sulfonylphenylene) (PBP) has been accomplished by the base mediated, polycondensation reaction between two biphenyl containing monomers. The bisphenol, 4,4′-bis[(4-hydroxyphenyl) sulfonyl]biphenyl (HSB), was reacted with 4,4′-bis[(4-chlorophenyl)sulfonyl]-biphenyl (CSB) in tetramethylene sulfone solvent. The highest mechanical properties and glass transition temperature was observed for polymer PBP with a reduced viscosity around 1.0 dL/g. Consequently, the current synthesis route provides polymer with higher properties than other historical preparative routes. Blends of PBP with a different poly(ether sulfone) were miscible based on the observance of a single glass transition temperature. The T_gs of the polymer blends exhibited an unusual positive deviation from the weighted linear averages of the components.     

Poly(ester amide)s derived from L‐tartaric acid and amino alcohols. II. Aregic polymers

A series of aregic poly(ester amide)s (a‐PEAT6) with ester/amide ratios (a : b) varying from 1 : 19 to 1 : 2 were prepared with L ‐tartaric acid, 6‐aminohexanol, and 1,6 hexanediamine as the starting materials. Polycondensation in a solution of the diamine with mixtures of pentachlorophenyl‐activated di‐O‐methyl‐L ‐tartaric and 6‐aminohexyl‐di‐O‐methyl‐L ‐tartaric acids led to a‐PEAT6(a : b), with the a : b ratio determined by the composition of the feed. The newly synthesized poly(ester amide)s were characterized by elemental analysis, size exclusion chromatography, and IR and NMR spectroscopy. They had number‐average molecular weights between 25,000 and 45,000 and were highly crystalline, showing melting temperatures ranging from 100 to 230 °C and glass‐transition temperatures oscillating between 50 and 100 °C. The thermal degradation of a‐PEAT6(a : b) began above 200 °C and concluded with a final weight loss between 60 and 90% of the initial mass. The process evolved with the formation of cyclic tartarimide units and extensive main‐chain scissions. The degradation mechanism is discussed in relation to the chemical composition and microstructure of the polymers. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2687–2696, 2000     

Synthesis and characterization of new poly(arylene ether)s containing heterocyclic units. II.

A series of new poly(arylene ether)s, containing naphthalene, pyridine, and quinoline units have been prepared by solution condensation polymerization. The synthesis involves nucleophilic displacement of aromatic dihalides with aromatic potassium bisphenates in an anhydrous dipolar aprotic solvent at elevated temperatures. The polymers, having inherent viscosity from 0.24 to 1.32 dL/g, were obtained in quantitative yield, have excellent thermal stability as shown by 10% weight loss temperatures in nitrogen and air (above 450 and 430°C, respectively) and high glass transition temperatures (in the range of 150–220°C). The introduction of quinoline moieties in the polymer backbone positively influences the thermal properties, such as high T_g/T_m ratios. © 1995 John Wiley & Sons, Inc.     

Stereoselective Interaction between Isotactic and Optically Active Poly(lactic acid) and Phenyl‐Substituted Poly(lactic acid)

Isotactic and optically active poly(D ‐lactic acid) (PDLA) and phenyl‐substituted poly(lactic acid)s (Ph‐PLAs), i.e., poly(D ‐phenyllactic acid) (Ph‐PDLA) and poly(L ‐phenyllactic acid) (Ph‐PLLA), were synthesized and stereospecific interactions between the synthesized polymers were investigated by their thermal properties and crystallization behavior using differential scanning calorimetry (DSC). The DSC measurements indicated that PDLA is miscible with Ph‐PLAs and that the attractive interaction between PDLA and L ‐configured Ph‐PLA is higher than that between PDLA and D ‐configured Ph‐PDLA. In other words, the latter result means that poly(lactic acid) (PLA) has a higher stereoselective attractive interaction with Ph‐PLA with the reverse configuration than with Ph‐PLA of the same configuration. These results strongly suggest that PLA‐based materials with a wide variety of physical properties and biodegradability can be fabricated by blending them with substituted PLAs with the reverse and same configurations.

     

Synthesis and characterization of new AB-type poly(etherimide)s containing bisphenol moieties

A series of new AB-type poly(etherimide)s having bisphenol-type moiety was prepared by the one-pot polyimidization using triphenylphosphite(TPP) in N-methyl-2-pyrrolidone(NMP)/pyridine solution at 150°C. Complete cyclodehydration was observed in the polymerizations as well as in model reactions. Polymers were obtained with inherent viscosities in the 0.27–0.49 dL/g range. The M_n and M_w/M_n of poly[4-(1,4-phenyleneoxy-1,4-phenylenehexafluoro-isopropylidene-1,4-phenylene)oxyphthalimide] (4d) with η_inh = 0.49 dL/g were 73,400 g/mol and 1.5, respectively. Most polymers could readily be dissolved in common organic solvents such as DMAc, NMP, and m-cresol. The polymer 4d was soluble even in chloroform. These polymers had glass transition temperatures between 205 and 235°C, and 5% weight loss temperatures in the range of 511–532°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3530–3536, 1999     

Synthesis and properties of poly[arylene ether (N-arylenebenzimidazole)]s

Poly(arylene ether)s containing N-arylenebenzimidazole groups were prepared by the aromatic nucleophilic displacement reaction of two new bis(hydroxyphenyl-N-arylenebenzimidazole)s with activated aromatic difluorides in sulfolane at 200°C in the presence of anhydrous potassium carbonate. The bis(hydroxyphenyl-N-arylenebenzimidazole)s were prepared from bis(o-aminoanilino) arylenes and phenyl-4-hydroxybenzoate. The polymers were soluble in N-methyl-2-pyrrolidinone and m-cresol and exhibited inherent viscosities from 0.37–0.86 dL/g and glass transition temperatures from 219–289°C. Thermogravimetric analyses showed 5% weight losses from 463–506°C in air and 467–522°C in nitrogen. Unoriented thin films exhibited tensile strengths, moduli, and break elongations at 23°C of 10.2–12.5 ksi, 318–365 ksi, and 4–7%, respectively, and at 177°C of 5.1–6.9 ksi, 256–296 ksi, and 1–5%, respectively. A 50 : 50 random copolymer prepared from 1,3-bis(4-fluorobenzoyl) benzene, 1,1'-(4,4'-biphenylene)-bis[2-(4-hydroxyphenyl)benzimidazole], and 5,5'-bis[2-(4-hydroxyphenyl)benzimidazole] exhibited higher moisture absorption and lower tensile properties than those predicted by a rule of mixtures relationship. The chemical, physical, and mechanical properties of these polymers are discussed. © 1993 John Wiley & Sons, Inc.?     

Synthesis and characterization of phthalazinone containing poly(arylene ether)s via a novel N–C coupling reaction

High‐molecular‐weight poly(phthalazinone)s with very high glass‐transition temperatures (T_g's) were synthesized via a novel N–C coupling reaction. New bisphthalazinone monomers ( 7a–e ) were synthesized from 2‐(4‐chlorobenzoyl) phthalic acid in two steps. Poly(phthalazinone)s, having inherent viscosities in the range of 0.34–0.91 dL/g, were prepared by the reaction of the bis(phthalazinone) monomers with an activated aryl halide in a dipolar aprotic solvent in the presence of potassium carbonate. The poly(phthalazinone)s exhibited T_g's greater than 230 °C. polymer 8b synthesized from diphenyl biphenol and bis(4‐flurophenyl) sulfone demonstrated the highest T_g of 297 °C. Thermal stabilities of the poly(phthalazinone)s were determined by thermogravimetric analysis. All the poly(phthalazinone)s showed a similar pattern of decomposition with no weight loss below 450 °C in nitrogen. The temperatures of 5% weight loss were observed to be about 500 °C. The poly(phthalazinone)s containing 4,4′‐isopropylidenediphenol and 4,4′‐(hexafluoroisopropylidene) diphenol and diphenyl ether linkage were soluble in chlorinated solvents such as chloroform. Other poly‐(phthalazinone)s were soluble in dipolar aprotic solvents such as N,N′‐dimethylacetamide. The soluble poly(phthalazinone)s can be cast as flexible films from solution. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2481–2490, 2003     

Crystallization and crystal structure of poly(ester amide)s derived from L‐tartaric acid

The crystal structure and crystallization behavior of a series of poly(ester amide)s derived from L ‐tartaric acid, 1,6‐hexanediamine, and 6‐amino‐1‐hexanol were examined. The study included aregic polymers containing 5, 10, and 20% of ester groups in addition to the syndioregic polymer containing equal amounts of amide and ester groups. X‐ray diffraction data revealed that all the aregic poly(ester amide)s adopt the same crystal structure as the parent polyamide made of L ‐tartaric acid, and 1,6‐hexanediamine. In this structure, chains are slightly compressed and arranged as in the α‐form of nylon 66. Solid‐state nuclear magnetic resonance (NMR) revealed that ester groups are excluded from the crystal phase except for the case of the syndioregic polymer. Isothermal crystallization kinetics was analyzed according to the Avrami theory. Crystallization rates were found to decrease regularly with increasing contents in ester groups and with increasing crystallization temperature. Avrami exponent values close to 2 were found whereas spherulitic morphologies were observed by optical microscopy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 116–125, 2007     

Synthesis and characterization of copoly(arylene sulfide)s

Copolymerizations of p-dichlorobenzene (DCB)/4-bromophenyl ether (BPE), DCB/4,4′-dibromobiphenyl (DBB), and DBB/BPE pairs with sodium sulfide under high temperature (270–290°C) utilizing N-methyl-2-pyrrolidinone (NMP) as solvent were carried out to give C(DCB/BPE), C(DCB/DBB), and C(DBB/BPE) copolymers, respectively. The reactivity of dihaloaromatic monomers toward thiolate anion in the polycondensation reaction followed the order DBB > DCB > BPE. The reactivity gap between DBB and DCB toward thiolate anion seemed to be smaller than that between BPE and DCB, resulting in both high yield and high molecular weight in the C(DCB/DBB) copolymers compared to C(DCB/BPE) copolymers. The copolymerization of DBB/BPE pair with sodium sulfide, which has larger reactivity gap than the DCB/DBB or DCB/BPE pair, gave mixtures of PBS and PPSE homopolymers especially in the range of 50–80 mol % BPE in the feed. The C(DCB/DBB) and C(DCB/BPE) copolymers, however, exhibited random copolymer character in all comonomer ratios in the feed as evidenced by copolymer composition and DSC data. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2311–2317, 1999     

新型热反应大分子单体的合成与表征

溶液法合成了一些低分子量的羟端基低聚苯醚砜,并由相转移催化剂将之转为热反应大分子单体——α,ω-双甲基丙烯酸聚苯醚砜酯;用FTIR、~1H-NMR对其结构进行了表征,GPC、VPO对其分子量进行了分析和测定;用DSC、DTA对聚苯醚砜双烯大分子单体的转变温度、热反应过程进行了测定和分析。     

Synthesis of high molecular weight poly(ether ketone)s by polycondensation of activated bis(aryl chloride)s with bisphenolates

The ability to achieve high molecular weight poly(ether ketone)s from the polycondensation of bis(aryl chloride)s with bis(phenolate)s has been consistently demonstrated. The polymerizations presented here help to delineate for specific bis(aryl chloride)/bisphenolate pairs the reaction conditions required to obtain high molecular weight polymers. Polycondensation of 1,3-bis(4-chlorobenzoyl)-5-tert-butylbenzene ( 6 ) and 2,2′-bis(4-chlorobenzoyl)-biphenyl ( 15 ) with various bisphenolates as well as of 2,2′-bis(4-hydroxyphenoxy)biphenyl ( 33 ) with 4,4′-dichlorobenzophenone ( 41 ) and 1,3-bis(4-chlorobenzoyl)benzene ( 43 ) were used as representative model systems to select reaction conditions that led to high molecular weight polymers. © 1995 John Wiley & Sons, Inc.     

Preparation and properties of novel soluble poly(aryl ether)s bearing covalently bound tetrapyrazinoporphyrazine units

Thermooxidatively stable amorphous poly(dicyanopyrazine ether)s with high glass transition temperatures are synthesized and converted into poly(aryl ether)s bearing covalently bound zinc(II) 2,3,9,10,16,17,23,24-octaphenyltetrapyrazinoporphyrazine units. They are soluble in common organic solvents and can be cast into strong and flexible films. The maximum absorption wavelength of the poly(aryl ether)s bearing zinc (II) 2,3,9,10,16,17,23,24-octaphenyltetrapyrazinoporphyrazine units in chloroform is 654 nm. © 1995 John Wiley & Sons, Inc.     

Highly phenylated poly(aryl ether phthalazine)s

Two series of novel amorphous poly(aryl ether phthalazine)s have been prepared via an intramolecular ring closure reaction of poly(aryl ether ketone)s (PAEKs) with hydrazine monohydrate. Fluorinated PAEKs, which display solubility in solvents incorporating a ketone functionality such as acetone or ethyl acetate, were converted to poly(aryl ether phthalazine)s to observe if these polymers would display similar solubility characteristics. The poly(aryl ether phthalazine)s have glass transition temperatures in the range of 278–320°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. The fluorinated poly(aryl ether phthalazine)s were not soluble in ketonic solvents. A series of poly(aryl ether phthalazine)s incorporating pendant 2-naphthalenyl moieties has been prepared in an attempt to produce amorphous, thermally stable polymers with high glass transition temperatures. The polymers have glass transition temperatures in the range of 287–334°C and show 5% weight loss points greater than 500°C in air and nitrogen atmospheres. Poly(aryl ether phthalazine)s undergo an exothermic reaction above the glass transition temperature. The major product of this reaction is a rearrangement of the phthalazine moieties to quiazoline moieties, however some crosslinking of the polymers occurs. Cured samples of the poly(aryl ether phthalazine)s show a small increase in the polymer T_g and are insoluble in all solvents tested. © 1996 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 34:1897–1905, 1996     

New rigid-rod poly(benzoxazole-imide)s containing chloro-substituted p-phenylene units in the main chain

A series of new poly(o-hydroxy amide-imide)s with high molecular weights were synthesized by low-temperature solution polycondensation from a preformed imide ring and chloro- or dichloro-substituted p-phenylene-containing diacid chlorides of 2,5-bis(trimellitimido)chlorobenzene or 1,4-bis(trimellitimido)-2,5-dichlorobenzene and three bis(o-amino phenol)s. All the poly(o-hydroxy amide-imide)s were readily soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone and N,N-dimethylacetamide. Transparent and flexible films of these polymers were cast from their solutions. The cast films had tensile strengths ranging from 88 to 102 MPa and elongations at break of 8–12%. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide-imide)s afforded novel poly(benzoxazole-imide)s. The poly(benzoxazole-imide)s exhibited glass-transition temperatures in the range of 310–338 °C and were stable up to 500 °C in nitrogen, with 10% weight-loss temperatures recorded between 550 and 570 °C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4151–4158, 1999     

Para-Xylylenes and analogues by base-induced elimination from 1,4-bis-(dialkylsulfoniomethyl)arene salts in poly(1,4-arylene vinylene) synthesis by the wessling soluble precursor method

para-Xylylenes are generated by treatment of various 1,4-bis(dialkylsulfoniomethyl)arene dihalides with base in water, methanol, and aqueous acetonitrile, as shown by UV-Vis spectroscopy. This procedure allows the monitoring of the transient xylylene monomers that yield polyelectrolyte precursor polymers for poly(arylene vinylene)s, formed by variations of the chemistry developed originally by Wessling and co-workers. Alkoxy, alkyl, and halogen ring substituents on the sulfonium salt precursors do not greatly affect the ability to generate and observe the growth and decay of steady-state concentrations of the para-xylylene intermediates. Use of strong resonance-acceptor substituents—such as cyano or nitro—on the ring reduces production of a strong para-xylylene absorption, possibly due to reluctance of the ylides initially formed from the bis-sulfonium salts to eliminate to the xylylenes. By variation of UV-Vis conditions, it was found that use of 20% aqueous acetonitrile rather than water allowed formation of low to modest molecular weight polyelectrolytes in cyano-substituted cases (M_w = 8000–37,000). Use of UV-Vis test experiments should be useful for screening of bis sulfonium salt precursors that may be expected to give high molecular weight polyelectrolytes—in cases where para-xylylene formation is easy—as well as for finding reaction conditions that will optimize polymer formation. © 1992 John Wiley & Sons, Inc.     

Synthesis and properties of novel aromatic polyhydrazides and poly(amide–hydrazide)s based on the bis(ether benzoic acid)s from hydroquinone and substituted hydroquinones

4,4′‐(1,4‐Phenylenedioxy)dibenzoic acid as well as the 2‐methyl‐, 2‐tert‐butyl‐, or 2‐phenyl‐substituted derivatives of this dicarboxylic acid were synthesized in two main steps from p‐fluorobenzonitrile and hydroquinone or its methyl‐, tert‐butyl‐, or phenyl‐substituted derivatives. Polyhydrazides and poly(amide–hydrazide)s were prepared from these bis(ether benzoic acid)s or their diacyl chlorides with terephthalic dihydrazide, isophthalic dihydrazide, or p‐aminobenzoyl hydrazide by means of the phosphorylation reaction or low‐temperature solution polycondensation. Most of the hydrazide polymers and copolymers are amorphous and readily soluble in various polar solvents such as N‐methyl‐2‐pyrrolidone (NMP) and dimethyl sulfoxide. They could be solution‐cast into transparent, flexible, and tough films. These polyhydrazides and poly(amide–hydrazide)s had T_gs in the range of 167–237°C and could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazole)s and poly(amide–1,3,4‐oxadiazole)s approximately in the region of 250–350°C, as evidenced by the DSC thermograms. All the tert‐butyl‐substituted oxadiazole polymers and those derived from isophthalic dihydrazide were organic soluble. The thermally converted oxadiazole polymers exhibited T_gs in the range of 208–243°C and did not show significant weight loss before 450°C either in nitrogen or in air. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1169–1181, 1999     

A facile synthesis of hydrophilic poly(ε-caprolactone)-based poly(ether-ester-amide)s

Segmented poly(ether-ester-amide)s, (PEEA)s, of controlled hydrophilicity degree, based on poly(ε-caprolactone) (PCL), were synthesized according to a facile two-step procedure using α,ω-dihydroxy oligomeric PCL, 4,7,10-trioxa-1,13-tridecanediamine and macromers prepared from poly(ethylene glycol)s and adipoyl chloride. The PEEAs showed M _n values in the range 5–11.5 kDa. A PCL-type crystallinity was found by WAXS. DSC indicated T_m values (49–51 °C) close to that of PCL macromer. Single glass transitions were observed both by DSC and DMTA techniques and the T_g values (−58–−50 °C by DSC) were slightly higher than that of PCL. The water uptake was in the range 4.8–26.0 wt.-% depending on the length of the poly(ethylene glycol) segment.

Monomers used to prepare the PEEAs.     

Poly(2‐ethyl‐2‐oxazoline) as Alternative for the Stealth Polymer Poly(ethylene glycol): Comparison of in vitro Cytotoxicity and Hemocompatibility

Limitations of PEG in drug delivery have been reported from clinical trials. PEtOx (0.4–40 kDa) as alternative is synthesized by a living, microwave‐assisted polymerization, and is directly compared to PEG of similar molar mass regarding cytotoxicity and hemocompatibility. In short‐term treatments, both types of polymers are well tolerated even at high concentrations. Moderate concentration and molar mass dependent cytotoxic effects occurred only after long‐term incubation at concentrations higher than therapeutic doses. PEtOx possesses not only an easy route of synthesis and beneficial physicochemical characteristics such as low viscosity and high stability, which are advantageous over PEG, but additionally in vitro toxicology comparable to PEG.