Microwave-assisted rapid electrophilic fluorination of 1,3-dicarbonyl derivatives with Selectfluor

A microwave-assisted fluorination method for 1,3-dicarbonyl compounds using Selectfluor^® has been developed. 2-Monofluorinated products can be obtained in high yield in neutral reaction conditions with addition of 1 eq. of Selectfluor^®. Treatment of 1,3-dicarbonyls with 3 eq. of Selectfluor^® in the presence of tetrabutylammonium hydroxide (TBAH) as the base results in the formation of 2,2-difluorinated derivatives only.     

Synthesis and Diazotization of Diethyl 6-Amino-2-Hydroxyazulene-1,3-Dicarboxylate and Its 2-Acetoxyl Derivative

Diethyl 6-amino-2-hydroxyazulene-1,3-dicarboxylate ( 6a ) and 2-acetoxyl derivative ( 6b ) were synthesized by reduction of the 6-azido derivatives ( 5a,b ) with zinc/acetic acid in excellent yields. 5a and 5b were prepared by azidation of diethyl 2-acetoxy-6-bromoazulene-1,3-dicarboxylate (4). Diazotization of 6a with sodium nitrite in the presence of concentrated sulfuric acid in dioxane gave diethyl 2-hydroxy- ( 7a ), 2,6-dihydroxy- ( 8a ), and 2-hydroxy-6-[2-(2-hydroxyethoxy)ethoxy]-azulene-1,3-dicarboxylates ( 9a ), in 5, 35 and 20% yields, respectively. Similar reaction of 6b gave the corresponding acetates 7b, 8b , and 9b , compounds of the same type from 6a . No evidence for the formation of 6-diazo-1,3-diethoxycarbonyl-2(6H) azulenone ( 2b ) was obtained in the employed reaction conditions.     

Diastereoselective Cyanation of α‐Keto Amides Derived from N‐Phenyl Camphorpyrazolidinone and Camphorsultam

The diastereoselective cyanation of α‐keto amides using trimethylsilyl cyanide in the presence of a Lewis acid is described. The corresponding O‐acetylated cyanohydrins are obtained in good to high levels of stereoselectivities. The predominance of products with the S absolute configuration at the newly generated stereogenic center was deduced from single crystal X‐ray analysis. ¹³C NMR data suggest that a preferential s‐cis conformation was formed by the chelation of a Lewis acid to the dicarbonyl oxygen atoms.     

碳酸二乙酯的合成方法

碳酸二乙酯是绿色的化工原料和合成中间体，具有很高的工业应用价值，它的合成受到国内外研究者的极大重视。本文简述了近些年来碳酸二乙酯合成方法的研究进展，介绍了光气法、酯交换法、氧化羰基化法、脱羰基法、二氧化碳直接合成法以及生化法的优缺点，并着重介绍了乙醇氧化羰基合成法。     

高活性Cu/SiO2催化剂应用于丙二酸二乙酯加氢制1,3-丙二醇

作为聚对苯二甲酸丙二醇酯(PTT)的不可替代原料,1,3-丙二醇(1,3-PDO)广泛应用于聚酯、树脂、化妆品、润滑剂和制冷剂等领域.采用丙二酸二乙酯(DEM)一步加氢合成1,3-PDO可避免传统化学工艺中醛类副产物的生成和生物法中产品纯度不高的问题,进而满足下游PTT的品质要求. Cu/SiO2催化剂因铜与载体间的强相互作用以及硅胶的弱酸性有利于催化活性中心的建立而被广泛应用于气相加氢反应,可以选择性地活化C?O键而不活化C?C键.因此,本文将Cu/SiO2催化剂应用于DEM加氢反应,重点考察了焙烧温度对催化剂结构与性能影响的本质原因.
　　采用蒸氨法制备Cu/SiO2催化剂,将一定量氨水滴加到硝酸铜水溶液中形成铜氨溶液后滴加JN-30硅溶胶,经老化、过滤、洗涤、烘干、焙烧、压片成型后得到40?60目的催化剂.将不同温度(623?1023 K)焙烧的Cu/SiO2催化剂装填入自制连续高压固定床反应器中进行DEM加氢反应,并采用N2物理吸脱附、电感耦合等离子体发射光谱、N2O化学吸附、X射线衍射、傅里叶红外光谱、H2程序升温还原(TPR)、透射电镜及X射线光电子能谱等手段对不同温度焙烧催化剂进行表征.结果表明,在723 K焙烧的催化剂具有最大的比表面积和最均一的孔径分布,其铜组分分散均匀,活性铜表面积最大,焙烧后可以形成最多的页硅酸铜,导致还原后Cu+/Cu0比例较高.在该催化剂作用下,于473 K、2.0 MPa、氢酯摩尔比330和液体空速1.8 h–1条件下, DEM转化率为90.7%,1,3-PDO选择性为32.3%.
　　焙烧温度对Cu/SiO2催化剂组成、织构、结构、形貌及还原后的价态有较大影响.在焙烧温度为623?1023 K时,低温焙烧有利于生成页硅酸铜,而高温焙烧则有利于形成CuO.在焙烧温度升高的过程中,铜组分形态会发生较大变化,在623?723 K焙烧的催化剂中页硅酸铜含量不断增加;继续升高温度至823 K,页硅酸铜含量减少,但是分散变差,导致铜的比表面积、孔体积和孔径最小;进一步升高温度至923 K,页硅酸铜消失, CuO分散均匀, H2-TPR的还原峰窄且对称;当温度升高到1023 K时,铜晶体迅速长大而较难被还原.     

Tributylphosphine as a superior catalyst for the α-C-addition of 1,3-dicarbonyl compounds to electron-deficient alkynes

The present work describes an improved one pot access to α-(gem-difunctional) cinnamate esters and to conjugated 1,3-diketones exploiting the addition of 1,3-diketones, β-keto esters and malonates to alkynoates catalyzed by phosphines. Among the catalysts, nBu₃P was found as one of the most effective allowing the reaction to proceed in milder conditions and in a more general manner than with other phosphines.     

Molecular chains in the structure of a Zinc(Ii) Complex with Pyrazine-2,6-Dicarboxylate and Water Ligands

Crystals of catena-[diaqua-(μ-pyrazine-2,6-dicarboxylato-N,O,O′-μ-N′)]zinc(II) contain molecular chains in which the Zn(II) ions are bridged by pyrazine-2,6-dicarboxylate ligands via two symmetry-related oxygen atoms, each donated by a different carboxylic group [Zn–O(1) and O(1) ^I : 2.182(2)?Å] and the hetero-ring nitrogen atom [Zn–N(1): 2.049(3)?Å] situated between them on one side and the second hetero-ring nitrogen atom [Zn–N(2) ^II 2.118(3)?Å] from the adjacent ligand on the other. The Zn(II) ion and four coordinating atoms are coplanar. Two symmetry related water molecules [Zn–O3 and O: 2.116(2)?Å] situated above and below this plane complete the coordination around the Zn(II) ion to six atoms forming a distorted octahedron.     

Synthesis of 1,3-enynes via Suzuki-type reaction of vinylic tellurides and potassium alkynyltrifluoroborate salts

The palladium-catalyzed cross-coupling reaction between potassium alkynyltrifluoroborate salts and vinylic tellurides proceeds readily to afford 1,3-enynes with moderate to good yields.     

New Approach to the Synthesis of 1,3-Chloroisothiocyanatoalkanes. Synthesis of Tetrahydro-1,3-thiazine-2-thiones and 2-Alkylamino-5,6-dihydro-1,3-thiazines

A method was developed to prepare 1,3-chloroisothiocyanatoalkanes by reducing 1,3-isothiocyanato ketones using sodium borohydride at pH ~7 and subsequent treatment of the resultant 1,3-isothiocyanato alcohols with thionyl chloride. The reaction of 1,3-chloroisothiocyanatoalkanes with sodium hydrosulfide or amines gives substituted tetrahydro-1,3-thiazine-2-thiones or 2-amino-5,6-dihydro-1,3-thiazines.     

Nucleophilic Ring Enlargement of 2-Substituted-3-isothiazolones to 1,3-Thiazin-4-ones

Abstract

1,3-Thiazin-4-ones 9 and 10 have been prepared from the corresponding isothiazolones 7 and 8 by a clean and smooth reaction with tertiary amines at room temperature. This rearrangement is attributed to the abstraction of a methine proton from the 2-position isothiazolone substituent, followed by ring enlargement through cleavage of the S-N bond.     

The enhancement of luminescent properties of Tb3+ complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold

This is the first report on the synthesis and characterization of tetra-1,3-diketone derivatives of tetrthia- and calix[4]arenes substituted by acetylacetonyl or dipivaloylmethanyl moieties at the upper rim and bearing hydroxyl groups at the lower rim as ligands for Tb³⁺ complexes. The spatial structure and tautomeric content for the synthesized ligands have been determined by means of X-ray, IR and NMR spectroscopy. Comparison of the sensitizing properties of tetrathiacalix[4]arenes and their calix[4]arene analogues on the Tb³⁺-centered luminescence in DMF solutions has been performed. A substantial enhancement of the luminescent properties of Tb³⁺- complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold was established.     

Design, synthesis, characterization, and preliminary complexation studies of chromogenic vanadophiles: 1,3-alternate thiacalix[4]arene tetrahydroxamic acids

New chromogenic supramolecular vanadophiles were designed and synthesized by incorporating hydroxamic acid chains on a 1,3-alternate thiacalix[4]arene scaffold and were found to show high affinity toward vanadate ions. The article describes a comprehensive design process to devise a tailor-made co-ordination cavity for vanadate ions by pre-organization of hydroxamic acid chelating moieties on a 1,3-alternate thiacalix[4]arene scaffold. These receptors simultaneously co-ordinate two vanadate ions giving a highly ‘staggered’ geometry with almost D_2d symmetry. Proposed structures and complexation behavior of the receptors were explained by critical examination of FTIR, UV-visible, mass, and ¹H NMR data.     

Comparison of the electrophilic and free-radical addition of halogens with hexafluoro-1,3-butadiene and 1,3-butadiene

Ionic and photochemical reaction of chlorine (Cl₂), bromine (Br₂) and iodine monochloride (ICl) to hexafluoro-1,3-butadiene (1) and 1,3-butadiene (2) were carried out under conditions that would provide product distributions under controlled ionic or free-radical conditions. Product distributions for ionic reaction of Cl₂ and Br₂ with 1 are similar and suggest a weakly-bridged halonium ion species. Theoretical calculations support weakly-bridged chloronium and bromonium ions for both dienes 1 and 2. There are more of the 1,4-dihalo-2-butene products from ionic halogenation of 1 than 2 which correlates with the greater charge density on carbon-4 of halonium ions from 1. Ionic and free-radical reactions of ICl with 1 give 8 and 2% of 3-chloro-4-iodohexafluoro-1-butene and 4-chloro-3-iodohexafluoro-1-butene, respectively. The minor cis-1,4-dihalo-2-butene products from 1 and 2 are reported when formed.     

一氯二乙基铝／氯苄／吡啶引发体系引发的异丁烯阳离子聚合

活性聚合是控制聚合物的分子量、分子量分布、结构和端基的最有效和简单的方法之一。就异丁烯单体(IB)而言,自Kennedy首次报道其活性阳离子聚合以来,陆续报道了一些新的活性引发聚合体系,这些体系主要有两类:一类是叔丁基的酯、醚、醇与路易斯酸构成的引发体系;另一类是特丁基氯与路易斯酸加电子给予体(如DMSO、DMA等),其中以     

TiO2-Mediated,One-Pot,Four-Component 1,3-Dipolar Cycloaddition Reaction: A Facile Synthesis of Dispiro-pyrrolidine Ring Systems

An expedient regioselective synthesis of dispiroindenoquinoxaline pyrrolidine derivatives mediated by TiO₂ in a one-pot, four-component 1,3-dipolar cycloaddition reaction is described.     

Iodine-alumina as an efficient and useful catalyst for the regeneration of carbonyl functionality from the corresponding 1,3-oxathiolanes and 1,3-dithiolanes in aqueous system

A simple and useful method has been demonstrated for the deprotection of 1,3-oxathiolanes and 1,3-dithiolanes to the corresponding carbonyl compounds in excellent yield by employing catalytic amount (30 mol %) of iodine supported on neutral alumina in ethanol-water or water. The major advantages of this protocol are mild reaction conditions, less reaction time, easy to handle, high yields, inexpensive reagent and environmentally benign.     

分子筛超强酸SO_4~(2-)/TiO_2/USY催化合成胡萝卜酸乙酯的研究

以USY分子筛为载体,采用共沉淀-浸渍法制备分子筛超强酸SO42-/Ti O2/USY,用其催化丙二酸、无水乙醇合成胡萝卜酸乙酯。考察了不同反应时间、带水剂种类、带水剂用量、醇酸比、催化剂用量、催化剂重复使用性等因素对反应酯化率的影响。结果表明:在丙二酸用量为0.1mol,醇酸摩尔比为3.1:1,催化剂用量为1.0g,反应时间为3h,带水剂环已烷用量为5m L时,酯化率达到92.13%,催化剂重复使用5次以后仍然有很高的活性。说明SO42-/Ti O2/USY对该反应具有很强且极稳定的催化活性。     

Calix[4]arenes with a Lid in their Upper Rims: 1,3-Dipolar Cycloaddition Reactions of Benzonitrile Oxides with 5-Allyl-, 5,11-Dially- and 5,17-Diallylcalix[4]arenes

The upper rim substituted mono- and diisoxazolinomethylcalix[4]arenes 9-23 are synthesized in good yields from 1,3-dipolar cycloaddition reactions of papa-substituted phenyl nitrileoxides with 5-allyl-, 5,11-diallyl-and 5,17-diallycalix[4]arenes 5-7 ; the structures of 9-23 are consistent with a ‘cone’ conformation and the ‘vase-with-a-lid’ structure of 11 was confirmed by a single-crystal x-ray analysis. Preliminary results show that the monoisoxazolinomethylcalix[4] arene can form an inclusion complex with ammonium cation.     

荧光光谱法研究磷酰化5,7-二羟基黄酮与ctDNA的相互作用

以溴化乙锭(EB)为荧光探针,研究了磷酰化5,7-二羟基黄酮与ctDNA的相互作用。实验结果表明,磷酰化5,7-二羟基黄酮与ctDNA间存在相互作用。随着温度的升高,磷酰化5,7-二羟基黄酮对ctDNA-EB体系的荧光猝灭常数降低,磷酰化5,7-二羟基黄酮可与ctDNA形成复合物,此猝灭过程为静态猝灭。根据Stern-Volmer方程,算出25℃及37℃下磷酰化5,7-二羟基黄酮对ctDNA-EB体系的荧光猝灭常数分别为Kq1=30 860 L/mol及Kq2=27 760 L/mol,并且算出它与ctDNA结合的平衡常数为KM=2.39×107L/mol。     

1,3-二叔丁基-5,5-二硝基嘧啶烷的合成及反应机理研究

1,3-二叔丁基-5,5-二硝基嘧啶烷(3)是混合炸药含能增塑剂1,3,5,5-四硝基-1,3-二氮杂环环己烷的关键硝化前体. 通过研究3的合成反应机理, 目的是为制备1,3,5,5-四硝基-1,3-二氮杂环环己烷的工艺优化提供理论依据. 以2,2-二硝基-1,3-丙二醇(1)、甲醛和叔丁胺为原料, 通过Mannich缩合反应得到1,3-二叔丁基-5,5-二硝基嘧啶烷. 采用同位素示踪技术以及分离关键中间体对反应机理进行推测. 以氘代甲醛、1和叔丁胺缩合得到氘标记的3, ¹H NMR和MS分析结果表明: 在反应过程中1首先解离生成偕二硝基甲烷和甲醛, 小分子碎片随机组合生成了3. 分离出了关键中间体1-叔丁氨基-2,2-二硝基乙烷. 根据所获得的证据, 推断了3的合成反应机理.