异氰酸酯交联的环氧树脂基二阶非线性光学聚合物

通过双酚A 二 (缩水甘油醚 )与苯胺的逐步聚合反应合成环氧树脂类先驱聚合物BPAN ,进一步通过先驱聚合物的后重氮偶合反应 ,制备了侧链带偶氮生色团的二阶非线性光学聚合物BPAN 1A NT .将BPAN 1A NT与适当量的异氰酸酯交联剂M2 0S混合 ,得到了双组分非线性光学聚合物体系BPAN 1A NT M2 0S .该体系在电场极化的同时可发生交联固化 ,极化后其二阶非线性光学系数高达 10 5 2pm v(λ =1 0 6 4 μm) ,同时还具有很好的极化偶极取向稳定性 ,2 0 0℃时的非线性光学系数仍可维持在初始的 80 %以上 .上述双组分非线性光学聚合物材料 (BPAN 1A NT M2 0S)同时具有高二阶非线性光学系数和高极化偶极取向稳定温度 ,可以预期 ,在聚合物电光调制器、光开关等器件中将有很好的应用前景 .     

Second-Order Nonlinear Optical Properties of a Polymer Exhibiting Optical Transparency Down to 340 nm

Abstract

The synthesis and characterization of an epoxy-based nonlinear optical (NLO) polymer exhibiting optical transparency down to 340 nm is reported. The synthesized polymers show spectroscopic properties (NMR, IR, UV) in accordance with the proposed structures. A glass transition temperature (T_g) of 92°C and a thermal degradation temperature (T_d) of 322°C were recorded. The poled polymer film exhibits stable second-order nonlinear optical activity (d₃₃ = 4.2 pm/V) over a period of 800 hours as characterized by the temporal response of the second harmonic signal at room temperature.     

POLYIMIDE/INORGANIC INTERPENETRATING POLYMER NETWORKS FOR STABLE SECOND-ORDER NONLINEAR OPTICS

Thermally stable NLO interpenetrating polymer networks (IPNs) based on an organosoluble polyimides functionalized with methacryloyl groups (PIB), and an alkoxysilane dye (ASD) have been developed. IPNs were formed through the free radical polymerization of methacryloyl group containing PIB, and sol-gel process of ASD. Optically clear samples exhibit large second-order optical nonlinearity (d₃₃ = 6.9-39.6 pm/V at 1064 nm) after poling and curing at 180°C for 2 hours. The temporal stability of the PIB/ASD IPN samples was much better than the inter-chain crosslinking polyimide/inorganic samples. The high rigidity of the polymer backbone and the interpenetrating structure of the polymer networks prevent the randomization of the aligned NLO chromophores     

PREPARATION AND SECOND-ORDER OPTICAL NONLINEARITY OF NOVEL PHENOXYSILICON NETWORKS BY SOL-GEL PROCESS**

 Four phenoxysilicon networks for nonlinear optical (NLO) applications were designed and prepared by an extended sol-gel process without additional H₂O and catalyst. All poled polymer network films possess high second-order nonlinear optical coefficients (d₃₃) of 10-?～10-8 esu. The investigation of NLO temporal stability at room temperature and elevated temperature (120℃) indicated that these films exhibit high d33 stability because the orientation of the chromophores are locked in the phenoxysilicon organic/inorganic networks.     

Synthesis of nonlinear optical polymers with large photoconductive sensitivity and transparency

Novel nonlinear optical (NLO) chromophore, 2-{3-[2-(4-methylsulfonylphenyl)vinyl]carbazol-9-yl}ethanol was synthesized and subsequently reacted with methacryloyl chloride to give a photoconducting NLO monomer ( M1 ). 2-Methylacrylic acid 2-[3-(diphenylhydrazonomethyl)carbazol-9-yl]ethyl ester ( M2 ) was also synthesized as a comonomer to enhance the carrier mobility of the NLO polymer. Photoconducting NLO polymers, P1 and P2 were obtained by the copolymerization of Ml with methyl methacrylate and M2 , respectively. These polymers were well soluble in organic solvents and showed glass transition at 177 °C and 196 °C, respectively. Polymer films of P1 and P2 were optically clear, and were transparent at wavelengths longer than 420 nm. The electro-optic coefficient (r₃₃) of poled P1 films was measured to be ∼5 pm/V at 632.8 nm. The photoconductive sensitivities of P1 and P2 were 6.2 × 10⁻¹⁴ S·cm⁻¹/mW·cm⁻² and 5.6 × 10⁻¹¹ S·cm⁻¹/mW·cm⁻².     

Synthesis and characterization of NLO chromophores bearing poly(1,6-heptadiyne)s for electro-optic application

We utilized the metathesis reaction to synthesize a new type of multifunctional polymer that contains a conjugated backbone and a second-order NLO chromophore as a pendant group. The 1,6-heptadiyne derivatives bearing NLO chromophores were easily polymerized by using a metathesis catalyst to give corresponding polymers with large optical nonlinearities. Molecular structural characterizations for the resulting polymers were achieved by ¹H- and ¹³C-NMR, FTIR, and UV-visible spectroscopies. Soluble polymers were obtained up to 72 mol % of chromophore monomer portion in the copolymer. These amorphous polymers exhibited good film-forming abilities and thermal stability. The electro-optic coefficient, r₃₃, of the poled polymer films was in the range of 0.5–10.1 pm/V, and the nonresonant values of the third-order NLO coefficient, χ⁽³⁾ was found to be about 10⁻¹¹ esu. © 1996 John Wiley & Sons, Inc.     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

Synthesis of polymers having photocrosslinkable moieties for second-order nonlinear optics

Second-order non-linear optical polymers having photocrosslinkable moieties were synthesized by cationic polymerization of monomer (I) and monomer (II). The polymerization proceeded rapidly to give linear polymers in high yields. Monomer reactivity ratios were calculated to be r₁ = 0.90 and r₂ = 0.96 (r₁r₂ = 0.86), indicating that these monomers copolymerized through the almost ideal copolymerization mechanism. The photocrosslinking reaction of an equimolar copolymer film underwent the conversion of up to ca. 70% upon irradiation with a 500 W high-presure mercury lamp for 5 min. The electric field induced polar orientation of the chromophores (pendant 4-nitrophenyloxy groups) in a photocrosslinked polymer was stable for more than 10 days. This polymer exhibits a nonlinear coefficient d₃₃ of 5.6 × 10^-10 esu measured at a pumping wavelength of 1064 nm.     

High glass transition temperature chromophore functionalised poly(phenylquinoxalines) for nonlinear optics

New chromophore functionalised second-order nonlinear optical (NLO) poly(phenylquinoxalines) were prepared by reaction of a bis(1,2-dicarbonyl)chromophore monomer and a tetraamine at room temperature. The heterocyclic polymers have high glass transition temperatures (>195 °C) and can therefore be excellent polymeric materials with high poling stabilities of the NLO effect.     

Novel Crosslinked Guest-Host System with Stable Second-Order Nonlinearity

Abstract

An epoxy-based nonlinear optical (NLO) polymeric material incorporating 4-(4′-nitrophenylazo) phenylamine has been synthesized and subsequently functionalized with acryloyl groups. A glass transition temperature (T ₈)of 108°C and a degradation temperature (air) of 251°C were recorded. After crosslinking at 160°C for 2 hours, the T ₈ of the polymer increased to 146°C. In order to increase the nonlinear optical chromophore concentration and the crosslinking density, the crosslink-able NLO dye, 2,4-acryloyloxy (4′-phenylazo nitrobenzene), was processed and poled in this epoxy-based NLO material matrix in a manner similar to a typical guest-host system, and thermally crosslinked under the above condition in the poled phase. The crosslinked guest-host material was found to be amorphous with a T ₈ of approximately 132°C. It also exhibits a second-order nonlinear optical coefficient d ₃₃ of 14.14 pm/V at a maximum doping level of 33% by weight of the NLO dye, and retains 93% of its original d ₃₃ value after being subjected to thermal treatment at 100°C for 168 hours. The behavior of the crosslinked polymer and the crosslinked guest-host polymer is discussed.     

Synthesis and characterization of main‐chain NLO oligomers and polymer that contain 4‐dialkylamino‐ 4′‐(alkylsulfonyl)azobenzene chromophores

An ω‐amino carboxylic acid monomer that contained a nonlinear optical (NLO) chromophore was prepared by a convergent synthesis. Strategies for selective protection/deprotection of the amino and carboxylic acid functionalities were developed. The protected monomer, 4‐[N‐(4‐benzyloxycarbonyl)butyl‐N‐methylamino]‐4′‐[2″,5″‐bis(decyloxy)‐4″‐(phthalimidomethyl)benzylsulfonyl]azobenzene, could be deprotected selectively or sequentially to give HOOC‐monomer‐N‐phthaloyl, benzyl‐OOC‐monomer‐NH₂, or HOOC‐monomer‐NH₂. Sequential synthesis was performed to yield main‐chain NLO dimers and tetramers. This was accomplished by selective deprotection and dicyclohexylcarbodiimide coupling. The HOOC‐monomer‐NH₂ was polymerized by treatment with diphenylphosphoryl azide to give a main‐chain NLO polyamide. The monomer, dimer, tetramer, and polymer NLO materials were characterized by ¹H, ¹³C, IR, and UV–visible spectroscopy as well as by gel permeation chromatography, differential scanning calorimetry, and elemental analysis. The NLO properties of these materials were measured. Thin films of the oligomers and polymer were prepared by spin casting on indium‐tin oxide coated glass. The second‐order NLO properties of the oligomers and polymer thin films were studied by in situ corona poling/second‐harmonic generation and attenuated total reflection methods. The optimal poling temperatures were significantly lower than the melting temperatures or glass‐transition temperatures of the oligomers and polymer. The poling efficiency increased in the following order: monomer, oligomers, and polymer. An electro‐optic coefficient of 4 pm/V at 1.06 μm was obtained for the polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 546–559, 2000     

Design and synthesis of a thermally stable second‐order nonlinear optical chromophore and its poled polymers

A multiple charge‐transfer second‐order nonlinear optical (NLO) chromophore 2,3‐bis(4‐aminophenyl)‐5,6‐dicyanopyrazine (BAPDCP) was successfully designed and synthesized. It was characterized by ¹H NMR, mass spectrometry, Fourier transform infrared spectroscopy, and elemental analysis. The first hyperpolarizability β of BAPDCP was measured with the Hyper–Rayleigh scattering technique, which was 123.5 × 10^?30 esu. The donor‐embedded prepolyimide and prepolyurea were also synthesized by a polyaddition reaction. Thermogravimetric analysis and differential scanning calorimetry demonstrated that either the chromophore or the polymers have fine thermal stability. The thin films of prepolymers were prepared by coating on ITO glass substrate and poled by corona poling at elevating temperature. The second‐order NLO coefficients d₃₃ of the films were measured by in situ second‐harmonic generation measurements. The d₃₃ were deduced as 27.7 and 16.5 pm/V for polyurea and polyimide at 1064 nm fundamental wavelength, respectively. The onset depoling temperature of the polyimide and polyurea were both as high as 200 °C. To understand the temperature effect to the orientation thermal stability of polyimide, two films were treated at different final poling temperatures. The depoling experimental results showed that the orientation stability is higher, as raising the final treated temperature but the d₃₃ value are almost similar. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2846–2853, 2003     

Electro-optical properties and nonlinear response of side chain liquid crystalline polymers

Among the NLO processes that have been studied, one of the most visually dramatic is the frequency doubling. In the field of optical information storage this process can provide the conversion of near-infrared laser light from diode lasers into deep blue light. Compared to the more traditional inorganic NLO materials, polymers with polarizable aromatic pendant side groups are increasingly being recognized as the materials of the future. Recently it has been pointed out that the axial ordering spontaneously present in nematic and smectic A polymers can be used to enhance field-induced polar ordering by elongating the orientational distribution function along the electric field direction. Depending on the value of the microscopic order parameters <P>₂ and <P>₄, the performance may be improved by a factor of 1 to 5 by using LCPs instead of ordinary amorphous polymers for SHG.^1-4) Interesting results have been obtained for copolyethers prepared by chemical modification of polyepichlorohydrin with classical 4-cyano-4'-hydroxybiphenyl mesogenic group which possesses NLO properties itself.^5-8) These copolyethers afford the opportunity to fine-tune the polymer properties by varying the concentration of the mesogenic side groups. As the concentration is increased, we move from a purely isotropic polymer to a nematic polymer. Spin-coated films have been activated using the corona poling technique and the order parameters <P>₂ have been determined from optical absorption spectra. The second harmonic coefficients d₃₃ and d₃₁ have been measured and compared with different statistical models. In view of the great practical importance, characterization of the wavelength dispersion has been carried out. It agrees well with the two-level approximation model. The dynamics of optical SHG has been investigated. It has been shown that both the presence of LC character in the material and the temperature at which the films are stored below Tg are important in determining the stability of the SH coefficients. A polyacrylate and a polymethacrylate bearing the same 4-cyanobiphenyl-based side groups have also been studied.^7-8) Of particular interest is the fact that the former is nematic while the latter is purely isotropic at rest, the addition of a methyl group to each structural unit of the polyacrylate backbone creating a higher conformational barrier to mesogen packing. Studies of the temporal and thermal characteristics of the poling process have been performed to: •understand and control the poling process with the intention of maximizing poling induced nonlinearity and stability. •elucidate the influence of the polymer backbone, our data including the use of the same mesogenic unit attached to increasing flexible backbones (e.g. polymethacrylate and polyether). •establish if, in the isotropic cases, noticeable axial order can be induced by the poling field, especially when the system is pulled through nematic/isotropic transition by the electric field.     

Synthesis and second-order nonlinear optical properties of a crosslinkable functionalized hyperbranched polymer

A new implementation of copper-free thermal Huisgen 1,3-dipolar crosslinking reaction into a high T_g hyperbranched polyimide polymer in order to stabilize the electro-optic (EO) activity of second-order non linear materials is reported. Towards this goal, two different synthetic approaches were explored. The first strategy is based on the post-functionalization of the polymer with mixtures of DR1 azido derivative and propargylic alcohol, whereas, the second consists in the preparation of two complementary functionalized hyperbranched polymers that are mixed just before the preparation of films. Materials exhibit good second-order nonlinear optical coefficients (d₃₃) close to 30 pm/V at the fundamental wavelength of 1064 nm. Moreover, the thermal stability of the NLO properties of these materials reaches temperatures as high as 150 °C, and probably higher. This represents the highest thermal stability of crosslinkable EO polymers based on the crosslinking Huisgen reaction.     

Synthesis of nonlinear optical polyimides containing azodiamine derivative chromophores and their electrooptic and thermal properties

Some thermally stable second‐order nonlinear optical (NLO) polyimides were synthesized. The polyimides were prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride and pyromellitic dianhydride with two aromatic azodiamine derivatives as the NLO chromophores. These chromophores, based on a nitro group connected with azobenzene as the acceptor end of a donor–π‐bridge–acceptor chromophore and a diamine group as the donor end, had specific chemical stability. On the basis of ZERNER'S INDO methods, according to the sum‐over‐states formula, a program for the calculation of nonlinear second‐order optical susceptibilities was devised. The resulting polyimides had high number‐average and weight‐average molecular weights of up to 26,000 and 53,500, respectively, and a large glass‐transition temperature of 248 °C. With an in situ poling and temperature ramping technique, the optimal temperatures (T_opt's) for corona poling were obtained for the largest second‐order NLO response. The electrooptic coefficient (γ₃₃) of a polyimide at a wavelength of 830 nm was up to 21 pm/V after corona poling under its T_opt, and the value remained at elevated temperatures (>90.6% was retained at 240 °C for >120 h). The thermal stability of the NLO polyimides was studied with UV spectrometry after poling of the films. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2478–2486, 2002     

Interpenetrating polymer networks with stable second order nonlinear optical properties

Interpenetrating polymer networks (IPNs) based on polyurethane and polyacrylate-containing 4-(4'-nitrophenylazo) aniline chromophore groups were synthesized and characterized by infrared spectra, gel content and differential scanning calorimetry. Thin, transparent films of the IPNs were prepared by spin-coating, followed by thermal curing and corona poling. The poled IPN film shows very good optical properties and exhibits only one glass transition temperature. The second-order nonlinear optical (NLO) properties of the poled film were studied by visible light absorbance measurement according to one-dimensional rigid oriented gas model. The second-order nonlinear optical polarizability can reach 10^-7 e.s.u. The poled IPN film of defined composition showed a good temporal stability of NLO properties at 120°C for more than 160 hr.     

Synthesis and properties of a second‐order nonlinear optical side‐chain polyimide

A thermal stable aromatic polyimide (PI) with side‐chain second‐order nonlinear optical (NLO) chromophores has been developed. The PI was prepared by the ring‐opening polyaddition of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride with a new diamine having two N‐ethyl‐N‐[4‐[(6‐chlorobenzothiazol‐2‐yl)diazenyl]phenyl]‐2‐aminoethanol units as the NLO chromophore, followed by poling during or after the thermal imidization process. The resulting PI had number and weight‐average molecular weights (M_n, M_w) of 25,000 and 80,000, respectively, and a relatively high glass transition temperature of 180°C. The second harmonic coefficient (d₃₃) of PI at the wavelength of 1.064 μm was 138 pm/V (329.6 × 10⁻⁹ esu) and remained unchanged at elevated temperatures. The corona poling process of the NLO‐substituted poly(amic acid) to the PI was also studied in detail by measuring the second harmonic generation (SHG) from the polymer films. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1321–1329, 1999     

Organic sol-gel materials for second-order nonlinear optics based on melamines

A series of all organic nonlinear optical (NLO) sol-gel materials based on melamines and an azobenzene dye (Disperse Orange 3; DO3) have been investigated. Different contents of DO3 were covalently bonded with the melamine-based organic network via condensation of amino and methylol groups. The optically clear samples exhibited second-order optical nonlinearity (second-harmonic coefficient d₃₃) = 35.4 and 11.5 pm/V at 1064 and 1542 nm, respectively) after poling and curing at 220°C for 1 h. Thermal behavior of these organic NLO sol-gel systems was studied by temperature-dependent dielectric relaxation. The results indicate that the incorporation of rigid NLO-active chromophore into the melamine-based matrix leads to high rigidity and dense packing of the organic network. Subsequently, higher glass transition temperatures were obtained for the organic NLO sol-gel material with higher DO3 content. The influence of composition on the temporal stability at 100°C was also investigated. Temporal stability at 100°C was studied as a function of system composition. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2503–2510, 1999     

THE ESTIMATION OF ORDERING DEGREE OF CORONA-POLED NONLINEAR OPTICAL POLYMER FILMS

The investigation of electrochromic effect of corona-poled nonlinear optical polymer films is an effective method for the estimation of poling level and the selection of poling conditions. The poling electric field E_p and orientational order parameter Φ, which are the important parameters to predict d_(33) of poled films, can be calculated by a simple operation from the number of red shift of charge transfer absorption band. The calculated results are in good agreement with the experimental data.     

Synthesis of nonlinear optical maleimide copolymer by polymer reaction and their electro-optic properties

Thermally stable poly(α-methyl styrene-co-maleimide) (MSMI) and poly(α-methyl styrene-co-4-carboxyphenyl maleimide) (MSCM) substrate polymers were obtained readily by free radical polymerization of comonomers. Introduction of a DR1 chromophore to the maleimide units of MSMI substrate polymer by the Mitsunobu reaction was dependent on the reaction solvent. The degree of substitution of DR1 into the MSMI polymer was bound to be 91.1 mol % and 0.4 mol % by UV spectrometers in the THF and DMF solvent, respectively. DR1 chromophore was, however, substituted in the MSCM polymer at 33.0 mol % by Mitsunobu reaction in the THF solvent. Both substrate and NLO polymer exhibited high thermal stability due to the incorporation of maleimide units in the polymer chain. The glass transition temperature (T_g) and initial decomposition temperature (T_i) of the NLO polymer were in the range of T_g = 185°C and T_i = 310–345°C. The electro-optic coefficient (r₃₃) of NLO polymer was determined with an experimental setup capable of the real-time measurement while varying both the poling field and temperature. The NLO polymer MSMI-THF had a higher r₃₃ value than MSCM-DR due to an increased degree of substitution of DR1 chromophore. MSMI-THF had a maximum r₃₃ value of 16 pm/V at 135 MV/m poling field with a 632.8 nm light source. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3715–3722, 1999