Dissolved butyltins in marine waters of the netherlands three years after the ban

In 1990 the Dutch government banned the use of tributyltin-containing antifouling paint for ships up to 25m long. Concentrations of dissolved (<0.45 μm) tributyltin and its degradation products di- and mono-butyltin were determined in six selected marinas during three consecutive years with a frequency of five times a year, starting in 1990. The highest butyltin concentrations were found in Scharendijke located in the salt water lake Grevelingen: up to 2500 ng dm^?3. In tidal-water marinas butyltin concentrations were in the order of 50–300 ng dm^?3, depending on the boating and dredging activity. In some marinas higher butyltin concentrations were found during the summer period, probably indicating the illegal use of tributyltin-containing antifouling paints. No clear trend of decrease in dissolved tributyltin concentrations in the different marinas has been found. Due to the equilibrium between the butyltins dissolved in the water and the butyltins adsorbed onto the sediment, water concentrations will remain more or less constant.     

Organotin stability during storage of marine waters and sediments

Summary The stability of organotin compounds in water and sediment samples during storage and pre-treatment is of paramount importance. This study presents experiments with butyltin compounds showing that the storage of filtered natural seawater in the dark at pH 2 in pyrex glass bottles is suitable to preserve the stability of tributyltin (TBT) over 4 months both at 20–25°C and 4°C. The other butyltin compounds (mono- and dibutyltin) are stable at 4°C but display some losses at 25°C. A poor recovery of butyltins in turbid water hampered the assessment of the stability on a quantitative basis: however, it could be demonstrated on a qualitative basis that the butyltin stability is uneasily achieved in water samples with high suspended matter. Finally, wet storage and freezing are found to be suitable to preserve the tributyltin stability in sediments, as well as ovendrying (at 50°C), freeze-drying and air-drying. Mono- and dibutyltin are generally subject to changes during the storage of sediments using the different methods.     

Determination of Trace Butyltin Compounds in Sea Water by Gas Chromatography-Atomic Absorption Spectrometry

A gas chromatography-atomic absorption spectrometric (GC-AAS) method has been developed for the determination of trace butyltin compounds in sea water. Aqueous butyltin compounds were reduced to the volatile hydride forms by NaBH₄ and were extracted with dichloromethane simultaneously. The dichloromethane extract was concentrated under reduced pressure, followed by direct injection into the GC-AAS system for analysis. The butyltin species were separated with a 2-m glass column packed with 2% OV-101 on Chromosorb G HP (100-120 mesh). Following GC separation, each species was transferred into an electrothermally heated (800 °C) quartz furnace for atomization. The tin atoms produced from individual butyltin compound were detected at 224.6 nm by an atomic absorption spectrometer. With a sea water sample (1 L), the detection limits (3σ) for monobutyltin, dibutyltin and tributyltin were approximately 20, 20 and 70 ng Sn L^?1, respectively. The method has been applied to the analysis of trace butyltin compounds in the sea water of Keelung Harbor.     

Sources and Accumulation of Butyltin Compounds in Ganges River Dolphin,Platanista gangetica

Concentrations of butyltin compounds (mono-, di-, and tri-butyltin) were determined in dolphin ( Platanista gangetica ), fish, invertebrates and sediment collected from the River Ganges, India, in order to understand the contamination levels, sources, and potential for biomagnification in freshwater food chains. Total butyltin concentration in dolphin tissues was up to 2000 ng g⁻¹ wet wt, which was about 5–10 times higher than in their diet. The concentrations in fish and benthic invertebrates, including polychaetes, were 3–10 times greater than in sediment. The biomagnification factor for butyltins in river dolphin from its food was in the range 0.2–7.5. Butyltin concentrations in Ganges river organisms were higher than those reported for several persistent organochlorine compounds. Discharge of untreated domestic sewage was one of the major sources of butyltin residues in Ganges river biota. High concentrations of butyltin compounds in freshwater food chains suggest the need to assess their toxic effects in aquatic organisms and to regulate their use. © 1997 by John Wiley & Sons, Ltd.     

Optimization of butyltin measurements for seawater,tissue, and marine sediment samples

Optimized techniques for measuring butyltins at the sub-part-per-trillion (ppb; 1:10¹²) level in seawater and at the part-per-billion (ppb; 1:10⁹) level in tissues and sediments are presented. Purge and trap/hydride derivatization followed by atomic absorption (AA) detection was optimized to give better sensitivity than was previously attained for seawater, yielding environmental detection limits of 0.08–0.2 ng dm^?3. Improvement in precision and reproducibility in measurement of butyltins in tissues and sediments was attained by adjustment of the concentration in an organic extract to minimize matrix effects and by use of internal standards. The tissues and sediments were homogenized and extracted with methylene chloride (CH₂Cl₂) after acidification. The butyltins in the organic layer were derivatized with hexylmagnesium bromide and analyzed by gas chromatography (GC) with a flame photometric detector (FPD). The absolute detection limits in tissues and sedimets were 0.1 ng for tributyltin (TBT), 0.12 ng for dibutyltin (DBT) and 0.29 ng for monobutyltin (MBT).     

Voltammetric speciation of butyltin compounds

A sensitive and selective procedure for the determination of tributyltin chloride (TBT), dibutyltin dichloride (DBT) and monobutyltin trichloride (MBT) based on solid phase extraction (SPE) with ENVI-Carb non-porous carbon as column material followed by adsorptive cathodic stripping voltammetry (AdSV) in the presence of tropolone is reported. The determination limits achieved using a 500 mL water sample were 210 ng L^–1 (as Sn) for TBT, 30 ng L^–1 (as Sn) for DBT and 40 ng L^–1 (as Sn) for MBT. The method was used to determine the levels of butyltin species in surface water from the yacht harbour at Zewen on the Mosel River and in the tap water supply in Trier.Dedicated to Professor Dr. K. Doerffel and Professor Dr. H. Kriegsmann on the occasion of their 70th birthdays     

Determination of Butyltin and Phenyltin by GC–FPD Following Ethylation by NaBEt4

An organotin speciation method was optimized for the simultaneous determination of mono-, di- and tri-butyltin compounds and mono-, di- and tri-phenyltin compounds in water. The procedure was based on a one-step simultaneous ethylation and extraction using the sodium tetraethylborate reagent directly in the aqueous phase in the presence of an iso-octane layer. Direct extract analysis was performed using capillary gas chromatography and flame photometric detection (GC–FPD). This derivatization procedure reduces drastically the number of analytical steps, thus saving time and improving reliability. Relative detection limits range from 0.4 to 0.8 ng dm⁻³ for butyltin species and from 0.7 to 2.1 ng dm⁻³ for phenyltin species; the linearity ranges from 0 to 400 ng dm⁻³. Analysis of environmental aqueous samples and a Certified Reference Material (CRM) demonstrates the accuracy of the analytical method.     

Determination of butyltin species in natural waters using aqueous phase ethylation and off-line room temperature trapping

Monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) were determined in natural water samples by aqueous phase ethylation with sodium tetraethylborate (STEB), room temperature trapping of the resulting volatile derivatives on Tenax TA^®, followed by gas chromatography-quartz furnace atomic absorption spectrometry (GC-QFAAS). Recoveries of butyltin spikes from natural water samples were 90-109% at concentrations of ∼100 ng Sn/l. The method precision at ∼100 ng Sn/l was ≤6% RSD for butyltins spiked into natural waters. The detection limits for 1 l water samples were <1 ng Sn/l for all butyltin species. Sample throughput of the method is high (greater than three samples per hour) due to the two-stage nature of the procedure, which allows derivatisation/trapping and GC-QFAAS quantitation to be performed separately. Off-line trapping is also advantageous as it extends the life of the GC column and quartz furnace to at least 12 months due to minimisation of carry-over of co-purged material.     

Isotope dilution analysis mass spectrometry for the routine measurement of butyltin compounds in marine environmental and biological samples

The highly qualified primary method of species-specific isotope dilution analysis has been employed in this work to evaluate for the first time the levels of butyltin compounds in the estuary of the river Eo (Northwest Spain) where there is, since many years, a high oyster farming activity. A spike solution containing mono-, di- and tributyltin enriched in ¹¹⁹Sn allowed the simultaneous determination of the three compounds in different marine environmental and biological samples collected in this area (seawater samples, sediments and biological tissues of four different marine species). The results obtained in this work showed toxic TBT levels for many marine species in 45% of the seawater samples analyzed whereas significant organotin concentrations were found to be obtained only in one of the sediments analyzed. On the other hand, TBT levels ranging from 20 to almost 200 ng g^− 1 (dry weight) were obtained in the different biological tissues analyzed demonstrating the bioaccumulation of organotin compounds in certain marine species.     

Levels of polycyclic aromatic hydrocarbons,polychlorinated byphenyls,methylmercury and butyltins in the natural UNESCO reserve of the biosphere of Urdaibai (Bay of Biscay,Spain)

Polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), methylmercury (MeHg⁺) and butyltins (mono-, di- and tri-butyltin, MBT, DBT and TBT) were monitored in oysters (Crassostrea sp.) and sediments collected in different sampling points of the UNESCO reserve of the biosphere of Urdaibai (Bay of Biscay) from March 2006 to June 2007. In the case of oyster samples, concentrations in the 290–1814 µg kg^?1 (PAHs), 70–475 µg kg^?1 (PCBs), 75–644 µg kg^?1 (MeHg⁺) and 200–1300 µg kg^?1 (as a sum of the three butyltins) ranges were obtained. In most samples TBT was the most abundant butyltin, followed by DBT and MBT. It should be highlighted that most samples exceeded the highest range (367 µg kg^?1) found in the last mussel watch programme carried out by the National Oceanic and Atmospheric Administration (NOAA) for butyltins in oyster samples. This could be due to the presence of a shipyard in the estuary. Sediment concentrations ranged as follows: total PAHs (856–3495 µg kg^?1) and total PCBs (58–220 µg kg^?1). Organometallic species were always below the limits of detection (LODs) (0.24 µg kg^?1 for MeHg⁺, 0.6 µg kg^?1 for MBT, 0.48 µg kg^?1 for DBT and 1.1 µg kg^?1 for TBT). In both sediment and oyster PAH sources were mostly combustion. In the case of PCBs, 4-6 chlorine-atom congeners were the most abundant ones. Slight differences in the profile of PAHs as well as PCBs can be detected when the matrices were compared with each other. Finally, in the case of PAHs, sediment and water column played the main role in the accumulation pathway into the organisms in all the sampling stations.     

Solid-phase extraction-liquid chromatography-fluorimetry for organotin speciation in natural waters

Summary A method is reported for the determination of dibutyltin (DBT), diphenyltin (DPhT), tributyltin (TBT), and triphenyltin (TPhT) species at the nanogram per litre concentration level in natural water samples. Analytes were isolated from samples by solid-phase extraction and analysed both off-line and on-line by reversed-phase high-performance liquid chromatography with post-column derivatization and fluorimetric detection. Several SPE cartridges and eluents were evaluated; C₁₈ enrichment and elution with a mixture of methanol, acetic acid, and water was found most suitable. Preconcentration factors up to 250 can be achieved when a 500-mL sample is processed. Detection limits, recovery rates, and the precision of the whole process have been determined. The method has been applied to the determination of organotin species in spiked natural water samples collected on the NW Mediterranean coast. Recovery rates range from 75 to 110% and detection limits are at the low ng L⁻¹ level (1–3 ng Sn L⁻¹ for DPhT, DBT, and PhT and 40 ng Sn L⁻¹ for TBT when 250 mL spiked sea water is processed.)     

GC FPD method for the simultaneous speciation of butyltin and phenyltin compounds in waters

A method is described for the simultaneous determination of nanogram amounts of mono-, di- and tri-butyltin compounds in water. The procedure is based on the conversion of tin compounds to volatile species by Grignard pentylation and analysis using GC with flame photometric detection (GC FPD). The ionic compounds are extracted from diluted acidified (HBr) aqueous solutions by using a pentane-tropolone solution. The extracted organotin compounds are pentylated by a Grignard reagent and purified on a Fluorisil column before analysis by GC FPD. The detection limits are 20 ng dm^?3 for butyltin compounds and 50 ng dm^?3 for phenyltin compounds. Recoveries from spiking experiments in tap-water and natural seawater matrices, in which no organotin compounds were detected, were greater than 90% for most of the alkyltin compounds.     

海水中甲基,丁基锡的形态分析

对海水中甲基、丁基锡的氢化反应与捕集、色谱分离及其原子化等进行了条件实验和最佳化。采用１５ｃｍＣｈｒｏｍｏｓｏｒｂＧＡＷ—ＤＭＣＳ载体和ＯＶ—３固定液，色谱分离锡的无机、一甲、二甲、三甲、一丁、二丁、三丁基化合物的保留时间分别为４０、１００、１２５、１３９、１６０、１９１、２２８ｓ；在０．２００ｄｍ３水样中直接测定海水中各形态锡的检出限分别为１．９、１．６、１．８、３．０、１．３、１．４、２２．４、ｎｇＳｎ·ｄｍ－３；其相应的测量精密度在１０％左右。     

Emission to air of volatile organotins from tributyltin‐contaminated harbour sediments

An analytical method for determining the presence in air of volatile forms (e.g. chlorides) of tributyltin (TBT) and that of methylbutyltins Me _nBu_(4?n)Sn (n = 1–3) was developed and used to establish whether dredged harbour sediments contaminated with TBT served as sources of air pollution with respect to organotin compounds. The method was based on active sampling of the air being analysed and sorption of analytes onto Poropak‐N. Sorbed methylbutyltins were extracted with dichloromethane and analysed by gas chromatography using flame photometric detection. Other butyltins were converted into butyltin hydrides prior to analysis by gas chromatography. It was shown that TBT‐contaminated sediments from Marsamxett Harbour, Malta, placed in 0.5 l chambers through which air was displaced by continuous pumping for 11 days released mainly methylbutyltins, with concentrations (as tin) reaching maximum 48 h mean values of 8.7 (Me₃BuSn), 22.1 (Me₂Bu₂Sn) and 93.0 ng m^?3(MeBu₃Sn) being measured. Other volatile forms of TBT, dibutyltin and monobutyltin were detected in the headspace air, but very infrequently and at much lower tin concentrations (<2 ng m^?3). It was also shown that methylbutyltins dissolved in sea‐water ([Sn] = 0.2 to 400 ng l^?1) were very difficult to exsolve from this medium, even on prolonged evaporation of the solutions using mechanical agitation and active ventilation. The results suggest that emission of methylbutyltins from contaminated sediments probably occurs only from the surface of the material. The environmental implications of these findings in the management of TBT‐polluted harbour sediments are discussed. Copyright © 2002 John Wiley & Sons, Ltd.     

Acid extraction treatment of sediment samples for organotin speciation; occurrence of butyltin and phenyltin compounds on the cadiz coast,south-west spain

A method is described for leaching of nanogram amounts of mono-, di and tri-butyltin compounds and mono-, di- and tri-phenyltin compounds from sediments. The procedure is based on soaking the sediments in a water–hydrogen bromide mixture (2:3) with magnetic stirring for 1 h followed by extraction with 0.02% (w/v) tropolone solution in pentane for 2 h. Organotins are determined by GF FPD after clean-up through a Florisil column and derivatization by Grignard pentylation. The method has been applied to the study of water and sediments in different areas of south-west Spain. Predominant species are butyltins, especially tributyltin (TBT), which has high values in waters and sediments of Puerto de Santa Maria and Cadiz Bay, as well as in sediments of the Sancti Petri Channel, which suggests a harmful action on biota. A direct relation has been found beween organotin levels and distance of potential focus determined by boating activities. In addition, the relative occurrence of dibutyltin (DBT) and monobutyltin (MBT) together with TBT has been noted, possibly as a result of a degractation process, and the influence of grain size of sediment and presence of organic matter on organotin accumulation has been studied.     

Molecular modeling for the interaction between proteasome beta 5 subunit and organotin compounds

It has been reported that organotins can inhibit the proteasomal chymotrypsin-like activity and induce cell death, but the interaction mode of organotins with proteasome has not been well defined. In this study, the IC₅₀ of butyltins and phenyltins against the proteasomal activity and the nature of their inhibition were investigated. It was found that both mono- and di-organotins were weak, reversible inhibitors against the proteasome, while tributyltin and triphenyltin were potent, irreversible proteasome inhibitors. In silico studies using the reversible organotin proteasome inhibitors demonstrated a tight correlation of the estimated proteasomal inhibition constants (Ki) with the experimental IC₅₀ values for proteasome inhibition. Furthermore, the Sn atom in TBT and TPT was found susceptible to form a coordinate bond with Thr 1 O^γ of the β5 subunit, which may account for the irreversible proteasome inhibition. The computational docking approach well predicted the inhibition nature of organotins toward the proteasomal chymotrypsin-like activity. This predictive model might aid in understanding the cytotoxic behavior of similar organometallic compounds.     

Bioaccumulation of Butyltin Compounds in Marine Mammals: The Specific Tissue Distribution and Composition

Although organotins are notorious man-made organometallic species introduced into the aquatic environment, no investigation had been concerned with contamination of higher trophic animals such as marine mammals until the last few years. Our recent work demonstrated the detection of butyltin compounds (BTCs), including mono- (MBT), di-(DBT), and tri-butyltin (TBT) in marine mammals. This paper reviews BTC contamination in higher trophic animals, based on our recent publications. Analysis for BTCs showed significant accumulation in tissues and organs of three finless porpoises ( Neophocaena phocaenoides ) collected from Japanese coastal waters. More than 10 μg of butyltin ions per gram on a wet weight basis were detected in the liver of a porpoise collected in the semi-closed sea. Distribution of BTCs in the tissues and organs of the porpoises showed a similar pattern to several other marine mammal species: higher concentrations in liver and kidney, and lower in muscle and blubber. In addition, tissues and organs from two water birds and one sea turtle species were also analyzed for BTCs, and their concentrations and compositions were compared among the species. The results showed that the distribution of these contaminants extends widely, not only to marine mammals but also to other higher trophic species. On the other hand, the composition of the BTCs exhibited a specific profile in each species. The ratios of hepatic concentrations of DBT or MBT to TBT for marine mammals were relatively lower than those of water birds and the sea turtle, indicating that metabolism and excretion of TBT may be less efficient in the mammalian species. © 1997 by John Wiley & Sons, Ltd.     

Isotope dilution analysis as a definitive tool for the speciation of organotin compounds

Different spike solutions available for the determination of butyltin compounds by isotope dilution analysis are described and applied for the determination of butyltin compounds in PACS-2 certified reference material. Additionally, those spike solutions were evaluated during the course of an interlaboratory exercise organised by the National Research Council of Canada and the Laboratory of the Government Chemist (UK) in order to quantify tributyltin in a pilot sediment. The aim of this project was to evaluate the capabilities of isotope dilution mass spectrometry to reduce the uncertainty in the certification of Reference Materials for the speciation of organotin compounds. All participants were supplied with a 17Sn-enriched TBT solution from the Laboratory of the Government Chemist (UK). In our case, we performed the analysis of the pilot sediment also using a 119Sn enriched spike (mixed mono-, di- and tributyltin) and a 118Sn-119Sn double spike. The use of these additional spike solutions not only allowed the determination of monobutyltin and dibutyltin in the pilot sediment but also the evaluation and correction of possible extraction-derived rearrangement reactions. An excellent agreement amongst our results and between the participants was obtained with a precision of 8.4% RSD at a level of ca. 80 ng TBT g(-1) (as Sn).     

Gas-chromatographic determination of phenols in aqueous samples after solid phase extraction

27 phenols including mono-, di-, tri-, tetra- and pentachlorophenols, mono- and dinitrophenols, mono-and dinitrocresols and dimethylnitrophenols have been extracted from aqueous samples by solid phase extraction using both modified silica gel (C₁₈) and XAD resin-adsorbents and determined by gas chromatography (GC) using capillary columns with specially desactivated weakly polar phases. If a 11 sample of spiked water is used, a considerable breakthrough is observed with phenol itself, while all other phenols are almost quantitatively extracted. The recovery of phenol itself can be improved by employing smaller sample volumes.     

Determination of organotin compounds in environmental samples by supercritical fluid extraction and gas chromatography with atomic emission detection

The extraction of six tetraalkyltin and seven ionic organotin compounds from spiked topsoil samples with supercritical carbon dioxide and carbon dioxide modified with 5 percent methanol was investigated. Analysis of the soil extracts was performed by gas chromatography with atomic emission detection. Retention times, minimum detectable concentrations, and detector linear ranges are included for nine organotin compounds (seven of the nine compounds were derivatized with n-pentylmagnesium bromide prior to gas chromatographic analysis). A 2³ factorial experimental design was used to study the effect of three variables (pressure, temperature, and extraction time) on compound recovery. The results indicate that the tetraalkyltin compounds are extracted from topsoil samples with recoveries ranging from 90 to 110 percent. Recoveries for the ionic organotin compounds ranged from 50 to 75 percent for trimethyltin chloride, triethyltin bromide, and tributyltin iodide; they were below 20 percent for dimethyltin dichloride, dibutyltin dichloride, diphenyltin dichloride, and butyltin trichloride. When sodium diethyldithiocarbamate was added to the soil samples prior to extraction, followed by extraction with carbon dioxide modified with 5 percent methanol, recoveries ranged from 70 to 90 percent for trimethyltin chloride, triethyltin bromide, dimethyltin dichloride, tributyltin iodide, and dibutyltin dichloride; recoveries were approximately 40 percent for butyltin trichloride and diphenyltin dichloride.