Determination of alkali, alkaline earth and transition metal ions in UO2, ThO2 powders and sintered (Th,U)O2 pellets by ion chromatography

An ion chromatographic method has been developed for the determination of traces of Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Sr²⁺, Fe³⁺, Cu²⁺, Ni^2+, Co²⁺, Zn²⁺, Cd²⁺, Mn²⁺ in UO₂, ThO₂ powders and sintered (Th,U)O₂ pellets. This new method utilizes poly-(butadiene-maleic acid) (PBDMA) coated silica cation exchange column and mixed functionality column of anion and cation exchange to achieve the separation of alkali, alkaline earths and transition metal ions, respectively. It involves matrix separation after sample dissolution by solvent extraction with TBP (tri butyl phosphate)-TOPO (tri octyl phosphine oxide)/CCl₄. Interference of transition metal ions in the determination of alkali, alkaline earth metal ions are removed by using pyridine 2,6-dicarboxylic acid (PDCA) in the tartaric acid mobile phase. Mobile phase composition is optimized for the base line separation of alkali, alkaline earth and transition metal ions. Linear calibration graphs in the range 0.01–20 μg mL⁻¹ were obtained with regression coefficients better than 0.999. The respective relative standard deviations were also determined. Recoveries of the spiked samples are within ±10% of the expected value. The developed method is authenticated by comparison with certified standards of UO₂ and ThO₂ powders.     

Determination of organic acids in alcoholic and nonalcoholic beverages by reversed-phase high-performance liquid chromatography

A procedure for the quantification of 9 organic acids, acetic, formic, citric, tartaric, lactic, malic, succinic, oxalic, and fumaric, in alcoholic and alcohol-free beverages by reversed-phase HPLC on a Pronto-SIL C18 AQ (300 × 3 mm) column (3 μm) with the mobile phase 5 mM Li₂SO₄ (pH 3.00, H₂SO₄) at the rate 0.5 mL/min and conductometry detection. The analytical ranges made 5–200 mg/L for tartaric, malic, lactic and acetic acids, 2–200 mg/L for the citric and fumaric, 10–400 mg/L for succinic, 15–400 for oxalic, and 20–200 for the formic acids, and so the detection limits: 1 mg/L for tartaric, formic, malic and fumaric, 2 mg/L for lactic, acetic and citric, 5 mg/L for succinic, and 10 mg/L for oxalic acids. The analysis of alcoholic beverages takes 30–40 min, and of non-alcoholic ones, 20–30 min; the standard deviation of the results of analyses does not exceed 5%.     

Use of Ionic liquids as additives in ion exchange chromatography for the analysis of cations

The behavior of acids (citric acid, nitric acid, oxalic acid, tartaric acid) as a mobile phase and imidazolium ionic liquids (the bromides, tetrafluoroborates and hexafluorophosphates of 1‐ethyl, 1‐butyl, and 1‐hexyl‐3‐methylimidazolium) as additives in ion exchange chromatography for cations (Na⁺, K⁺, Mg²⁺, Ca²⁺) separation were studied. The results showed that nitric acid and 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate offered the most interesting features in the separation of cations, such as lower retention time and better resolution. The selected optimal conditions were achieved by adding 0.10 mM 1‐hexyl‐3‐methyl‐imidazolium hexafluorophosphate in 4.0 mM HNO₃ mobile phase for the separation of four cations with the flow rate of 0.9 mL/min at room temperature (25°C). The linear regression equations of Na⁺, K⁺, Mg²⁺, Ca²⁺ were S  = 4.4763c  + 0.0209, S  = 3.8903c  – 0.0087, S  = 6.3974c  – 0.0173, and S  = 7.601c  – 0.0339 and the limits of detection of Na⁺, K⁺, Mg²⁺, Ca²⁺ were 0.296, 4.98, 0.0970, and 1.22 μg/L, respectively. In this work, four cations in samples were successfully detected.     

Application of co-electroosmotic capillary electrophoresis for the determination of inorganic anions and carboxylic acids in soil and plant extract with direct UV detection

Summary Indirect UV detection in capillary zone electrophoresis (CZE) is frequently used for the determination of inorganic anions and carboxylic acids. However, there are few reports on direct UV detection of these solutes in real samples. This paper describes the use of direct UV detection of inorganic anions and organic acids in environmental samples using co-electroosmotic capillary zone electrophoresis (co-CZE) at 185 nm. The best separation and detection of the solutes was achieved using a fused silica capillary with an electrolyte containing 25 mM phosphate, 0.5 mM tetradecyltrimethylammonium bromide (TTAB) and 15% acetonitrile (v/v) at pH 6.0. Four common inorganic anions (Cl⁻, NO₂ ⁻, NO₃ ⁻ and SO₄ ²⁻) and 11 organic acids (oxalic, formic, fumaric, tartaric, malonic, malic, citric, succinic, maleic, acetic, and lactic acid), were determined simultaneously in 15 min. Linear calibration plots for the test solutes were obtained in the range 0.02–0.5 mM with detection limits ranging from 1–9 μM depending on the analyte. The proposed method was successfully used to determine inorganic anions and carboxylic acids in soil and plant tissue extracts with direct injection of the sample.     

Grewichtsanalytische Bestimmung und Abtrennung der Oxals?ure als Thoriumsalz von Wein-, ?pfel-, Citronen- und Bernsteins?ure

Zusammenfassung Es wird ein Verfahren zur gravimetrischen Oxalatbestimmung empfohlen, das zufriedenstellende Ergebnisse liefert. Hierbei wird Oxalat als Thoriumoxalat gefällt und der Niederschlag zu ThO₂ verglüht. Die Methode kann auch zur Trennung der Oxalsäure von Wein-, Äpfel-, Citronen- und Bernsteinsäure benutzt werden.

---

Summary Oxalate can be determined with satisfactory results by precipitating it as thorium oxalate, igniting the precipitate and weighing the ThO₂ obtained. This method is also suitable for the separation of oxalic acid from tartaric, malic, citric, and succinic acid.

     

Study on synthesis and evolution of sodium potassium niobate ceramic powders by an oxalic acid-based sol–gel method

Potassium sodium niobate (KNN) ceramic powders by a variation of sol–gel method is synthesized. The metal precursors used for the KNN synthesis are potassium carbonate, sodium carbonate and niobium hydroxide, ethylene glycol are used as chelating and esterification agent, respectively. The effects of amount of oxalic acid (OA) and ethylene glycol (EG), pH value on the stability of the precursor sol were investigated. The evolution of (K_0.5Na_0.5)NbO₃ crystal phase was also investigated by XRD, IR, SEM and TG-DTA. The results showed that stable precursor sol was formed when n_(OA):n_(Mn+) = 3:1, n_(OA):n_(EG) = 1:2 and pH value was in the range of 2.5–3.5. Xerogel was sintered in the range of 500–650 °C to prepare K₆Nb_10.88O₃₀ and Na₂Nb₄O₁₁ powder. Then the compound was sintered at 750 °C to produce perovskite (K_0.5Na_0.5)NbO₃ ceramic powders. The grain size is about 100–200 nm.     

Separation of uranium from different uranium oxide matrices employing supercritical carbon dioxide extraction

Uranium from different uranium oxide matrices was extracted with tri-n-butyl phosphate–nitric acid (TBP–HNO₃) adduct using supercritical carbon dioxide (SC CO₂). While 30 min dissolution time at 323 K was sufficient for U₃O₈ and UO₂ powder, UO₂ granule (at 333 K) and crushed green pellet (at 353 K) required 40 min. Crushed sintered pellet required 60 min at 353 K for complete dissolution. Influence of various experimental parameters such as temperature, pressure, volume of TBP–HNO₃ adduct, acidity of nitric acid used for preparing TBP–HNO₃ adduct and extraction time on uranium extraction efficiency was also investigated. For UO₂ powder, temperature of 323 K, pressure of 15.2 MPa, 1 mL TBP–HNO₃ adduct, 10 M nitric acid and 30 min extraction time was found to be optimum. ~70% uranium extraction efficiency was obtained on extraction with SC CO₂ alone which increased to 90% with the addition of 2.5% TBP in SC CO₂ stream. Extraction efficiency was found to vary linearly with TBP percentage and nearly complete uranium extraction (~99%) was observed with 20% TBP. Nearly complete extraction was also achieved with addition of 2.5% thenoyltrifluoroacetylacetone (TTA) in methanol. The optimized procedure was extended to remove uranium from simulated tissue paper waste matrix smeared with uranium oxide solids.     

Uranium(VI) sequestration by polyacrylic and fulvic acids in aqueous solution

Stability data on the formation of dioxouranium(VI) species with polyacrylic (PAA) and fulvic acids (FA) are reported with the aim to define quantitatively the sequestering capacity of these high molecular weight synthetic and naturally occurring ligands toward uranium(VI), in aqueous solution. Investigations were carried out at t = 25 °C in NaCl medium at different ionic strengths and in absence of supporting electrolyte for uranyl–fulvate ( \textUO₂²⁺ {{\text{UO}}_{2}}^{2+} –FA) and uranyl–polyacrylate ( \textUO ₂ ²⁺ {{\text{UO}}_{ 2}}^{ 2+ } –PAA, PAA MW 2 kDa) systems, respectively. The experimental data are consistent with the following speciation models for the two systems investigated: (i) UO₂(FA₁), UO₂(FA₁)(FA₂), UO₂(FA₁)(FA₂)(H) for \textUO ₂ ²⁺ {{\text{UO}}_{ 2}}^{ 2+ } –fulvate (where FA₁ and FA₂ represent the carboxylic and phenolic fractions, respectively, both present in the structure of FA), and (ii) UO₂(PAA), UO₂(PAA)(OH), (UO₂)₂(PAA)(OH)₂ for \textUO ₂ ²⁺ {{\text{UO}}_{ 2}}^{ 2+ } –polyacrylate. By using the stability data obtained for all the complex species formed, the uranium(VI) sequestration by PAA and FA was expressed by the pL₅₀ parameter [i.e. the −log(total ligand concentration) necessary to bind 50% of uranyl ion] at different pH values. A comparison between pL₅₀ values of FA and PAA and some low molecular weight carboxylic ligands toward uranyl ion is also given.     

Preparation and characterization of uranyl complexes with phosphonate ligands

The preparation, spectroscopic characterization and thermal stability of neutral complexes of uranyl ion, UO₂ ²⁺, with phosphonate ligands, such as diphenylphosphonic acid (DPhP), diphenyl phosphate (DPhPO) and phenylphosphonic acid (PhP) are described. The complexes were prepared by a reaction of hydrated uranyl nitrate with appropriate ligands in methanolic solution. The ligands studied and their uranyl complexes were characterized using thermogravimetric and elemental analyses, ESI-MS, IR and UV–Vis absorption and luminescence spectroscopy as well as luminescence lifetime measurements. Compositions of the products obtained dependent on the ligands used: DPhP and DPhPO form UO₂L₂ type of complexes, whereas PhP forms UO₂L complex. Based on TG and DTG curves a thermal stability of the complexes was determined. The complexes UO₂PhP·2H₂O and UO₂(DPhPO)₂ undergo one-step decomposition, while UO₂PhP · 2H₂O is decomposed in a two-step process. The thermal stability of anhydrous uranyl complexes increases in the series: DPhPO < PhP < DPhP. Obtained IR spectra indicate bonding of P–OH groups with uranyl ion. The main fluorescence emission bands and the lifetimes of these complexes were determined. The complex of DPhP shows a green uranyl luminescence, while the uranyl emission of the UO₂PhP and UO₂(DPhPO)₂ complexes is considerably weaker.     

Capillary ion electrophoresis-capacitively coupled contactless conductivity detection of inorganic cations in human saliva on a polyvinyl alcohol-coated capillary

Capillary ion electrophoresis–capacitively coupled contactless conductivity detection (CIE-C4D) with a polyvinyl alcohol chemically coated capillary (PVA capillary) was used to analyze inorganic cations (Na⁺, K⁺, NH₄⁺, Mg²⁺, and Ca²⁺) commonly found in human saliva. The PVA capillary, which was made by our laboratory, minimized electro-osmotic flow in the wide pH range of the background electrolyte (BGE), and the PVA layer adsorbed to capillary wall did not affect the conductimetric background level. In this study, we determined an optimized BGE of 30 mM lactic acid/histidine plus 3 mM 18-crown-6 for the CIE-C4D system using the PVA capillary, which could simultaneously improve the separation of Mg²⁺ and Ca²⁺ from Na⁺ and that of K⁺ from NH₄⁺. This system obtained highly reproducible separation of cations in human saliva samples within 8 min at 20 kV without deprotonation. The quantifiability of cations in human saliva samples on the CIE-C4D system was demonstrated through identification by ion chromatography with satisfactory results.     

Kinetics study on the dissolution of UO<Subscript>2</Subscript> particles by microwave and conventional heating in 4 mol/L nitric acid

The dissolution of UO₂ particles in 4 mol·L⁻¹ nitric acid medium at temperatures of 90–110°C by microwave heating and conventional heating has been investigated, respectively. It is found that the dissolution ratios of UO₂ particles by microwave heating were 10%–40% higher than that by conventional heating. Kinetics research shows that the dissolution of UO₂ particles in 4 mol·L⁻¹ nitric acid is controlled by the diffusion control model for microwave heating and by the surface reaction control model for conventional heating. The diffusion control model for the dissolution of UO₂ particles by microwave heating could be explained by the diffuseness on the surface of UO₂ particles.     

Dissolution of sintered thorium dioxide in phosphoric acid using autoclave and microwave methods with detection by gamma spectrometry

A quantitative and fast method of dissolution of refractory thoria (ThO₂) was developed for the determination of thorium (Th) in a given sample. The dissolution of sintered ThO₂ powder, microspheres and pellets using 88% phosphoric acid was investigated. The conditions of quantitative dissolution of ThO₂ microspheres were optimized by conventional heating in autoclave and also by microwave heating. 100 mg of sintered ThO₂ microspheres were dissolved in 8 g of phosphoric acid in an autoclave, and heating at 170 °C for 3 h, in comparison to 5 g of phosphoric acid by microwave heating (375 W) at 220 °C for 1 h. Dissolution studies on the powder form of sintered ThO₂ were also performed. 1 g of sintered ThO₂ powder could be dissolved in 6.5 g of phosphoric acid in autoclave heating at 170 °C for 1 h. Strong complexing of (PO₄)³⁻ with Th⁴⁺ may be the influencing factor for quantitative dissolution of ThO₂.     

Preparation and evaluation of a functionalized polymer-coated silica based sorbent for metal ion separation

A silica based sorbent with an anion complexone polymer coating, [24]ane-N₆ macrocycle, was prepared. The chelation properties of this material were investigated by elemental analysis, infrared spectra and Voige’s method. The polymer-coated silica column (25– 40 μm, 100 × 4.6 mm i.d.) was employed for trace metal analyses. Oxalic acid, malonic acid, succinic acid, citric acid, phthalic acid and acetic acid were used as mobile phases. Their retention characteristics were elucidated. Oxalic acid was found to be the most effective eluent. With a mobile phase consisting of oxalic acid (25 mM) and sodium nitrate (25 mM) at pH 4.2, the separation of copper(II), cadmium(II), cobalt(II) and zinc(II) in sea water could be achieved. The identification of metal ions was performed at 510 nm using 4(2-pyridylazo)resorcinol (1 × 10^–4 M) as post column reagent. The limits of detection were 5 × 10^–7 M, 1 × 10^–5 M, 3 × 10^–5 M and 2 × 10^–6 M for copper(II), cadmium(II), cobalt(II) and zinc(II) based on three times the standard deviation of the response for the lowest concentration (n = 5) in the chromatogram with a sample volume of 50 μL. For evaluation of data reliability, oyster tissue (NIST SRM 1566 a) was studied with the proposed system. Received: 9 February 1998 / Revised: 15 May 1998 / Accepted: 16 June 1998     

The study of the speciation of uranyl–sulphate complexes by UV–Vis absorption spectra decomposition

Uranyl–sulphate complexes are the predominant U(VI) species present in acid solutions resulting either from underground uranium ore leaching or from the remediation of leaching sites. Thus, the study of U(VI) speciation in these solutions is of practical significance. The spectra of UO₂(NO₃)₂ + Na₂SO₄ solutions of different Φ _S = [SO₄²⁻]/[U(VI)] ratio at pH = 2 were recorded for this purpose. As the presence of uranyl-nitrate complexes should be expected under these experimental conditions, the spectra of UO₂(NO₃)₂ + NaNO₃ solutions with different Φ _N = [NO₃⁻]/[U(VI)] ratio at pH = 2 were also measured. The effects of Φ _S and Φ _N ratios value were most pronounced in wavelength interval 380–500 nm. Therefore, these parts of experimental overall spectra were used for deconvolution into the spectra of individual species by the method proposed. It enabled to calculate stability constants of anticipated species at zero ionic strength. The Specific Ion Interaction Theory (SIT) was used for this purpose. Stability constants of UO₂SO₄, UO₂(SO₄)₂²⁻, UO₂NO₃ ⁺ and UO₂(NO₃)₂ coincided well with published data, but those for UO₂(SO₄)₃⁴⁻ and UO₂(NO₃)₃⁻ were significantly lower.     

Sandwich-type Uranium-Substituted of Bismuthotungstate: Synthesis and Structure Determination of [Na(UO2)2(H2O)4(BiW9O33)2]13?

The sandwich-type [Na(UO₂)₂(H₂O)₄(BiW₉O₃₃)₂]¹³⁻ uranium (VI) has been synthesized by reacting the trivacant species of B-α-[BiW₉O₃₃]⁹⁻ with and investigated by IR and UV–Vis spectroscopy, and elemental analysis. The X-ray single crystal analysis was carried out on Na₁₃[Na(UO₂)₂(H₂O)₄(BiW₉O₃₃)₂] · 33H₂O (I) which crystallizes in the orthorhombic system, space group Pna2₁ with a = 33.8454(19) ?, b = 21.1484(12) ?, c = 13.2403(7) ?, α = 90°, β = 90°, γ = 90°, and Z = 4. The polyanion consists of two lacunary B-α-[BiW₉O₃₃]⁹⁻ groups which sandwich two uranyl cations and one sodium cation. The uranium atoms adopt distorted pentagonal–bipyramidal coordination, achieved by two equatorial bonds to each BiW₉O₃₃ unit and one external water ligand. The coordination of each uranium atom is evident by the shift of ν_as(W–O_b–W) and ν_as(Bi–O) stretching vibrational bonds. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Oxalic acid-assisted preparation of LiFePO4/C cathode material for lithium-ion batteries

LiFePO₄/C composite is synthesized by oxalic acid-assisted rheological phase method. Fe₂O₃ and LiH₂PO₄ are chosen as the starting materials, sucrose as carbon sources, and oxalic acid as the additive. The crystalline structure and morphology of the products are characterized by X-ray diffraction and field emission scanning electron microscopy. The charge–discharge kinetics of LiFePO₄ electrode is investigated using cyclic voltammetry and electrochemical impedance spectroscopy. It is found that the introduction of appropriate amount of oxalic acid leads to smaller particle sizes, more homogeneous size distribution, and some Fe₂P produced in the final products, resulting in reduced polarization, impedance, and improved Li⁺ ion diffusion coefficient. The best cell performance is delivered by the sample with R = 1.5 (R of the molar ratio of oxalic acid to LiH₂PO₄). Its discharge capacity is 154 mAh g⁻¹ at 0.2 C rate and 120 mAh g⁻¹ at 5.0 C rate. At the same time, it exhibits an excellent cycling stability; no obvious decrease even after 1,000 cycles at 1.0 C rate.     

Heat capacity and thermal expansion coefficient of rare earth uranates RE<Subscript>6</Subscript>UO<Subscript>12</Subscript> (RE = Nd,Gd and Eu)

Rare earth uranates Nd₆UO₁₂, Gd₆UO₁₂ and Eu₆UO₁₂ were prepared by combustion synthesis and characterized by XRD. Single-phase rhombohedral structure was observed for all the above compounds. Heat capacity measurements were carried out on Nd₆UO₁₂ and Gd₆UO₁₂ with differential scanning calorimetry in the temperature range 298–800 K. Enthalpy, entropy and Gibbs energy functions were computed. Heat capacity values of Nd₆UO₁₂ and Gd₆UO₁₂ at 298 K are 436 and 400 J K⁻¹ mol⁻¹, respectively. Thermal expansion characteristics were studied using high temperature X-ray diffraction (HTXRD) in the temperature range 298–873 K. The coefficients of thermal expansion measured for Eu₆UO₁₂ are 10.5 × 10⁻⁶ and 7.3 × 10⁻⁶ K⁻¹ along a- and c-axis, respectively. Similarly, the coefficients of thermal expansion of Gd₆UO₁₂ along a-axis are 10.0 × 10⁻⁶ K⁻¹ and along c-axis is 9.7 × 10⁻⁶ K⁻¹.     

Complexation of U(VI), Ce(III) and Nd(III) with acetohydroxamic acid in perchlorate aqueous solution

Complexes of UO₂ ²⁺, Ce³⁺ and Nd³⁺ (M) with acetohydroxamic acid (AHA or L) in an aqueous solution have been investigated by the pH-spectral titration method at 25 °C in an aqueous medium of 1.0 M NaClO₄ ionic strength. Cerium(III) and neodymium(III) form [ML]²⁺, [ML₂]⁺, [ML₃] complexes with acetohydroxamic acid, while in case of UO₂ ²⁺ form [UO₂L]⁺, [UO₂L₂] complexes with acetohydroxamic acid. Data processing with SQUAD program calculates the best values for the stability constants from pH-spectrophotometric titration data. The protonation constant obtained was pK₁ = 9.15 ± 0.04 at 25 °C. The stability constants for acetohydroxamic acid with UO₂ ²⁺, Ce³⁺ and Nd³⁺ were β₁ = 7.22 ± 0.011, β₂ = 14.89 ± 0.018 for UO₂ ²⁺ and β₁ = 5.05 ± 0.062, β₂ = 10.60 ± 0.076, β₃ = 16.23 ± 0.088 for Ce³⁺ and β₁ = 5.90 ± 0.028, β₂ = 12.22 ± 0.038, β₃ = 18.58 ± 0.042 for Nd³⁺, respectively.     

Electrocatalytic behaviour of citric acid at a cobalt phthalocyanine-modified screen-printed carbon electrode and its application in pharmaceutical and food analysis

Cobalt phthalocyanine-modified screen-printed carbon electrodes (CoPC-SPCEs) have been investigated as disposable sensors for the measurement of citric acid. The analyte was found to undergo an electrocatalytic oxidation process involving the Co²⁺/Co³⁺ redox couple. Calibration plots were found to be linear in the range 2 mM to 2.0 M; replicate determinations of a 5.2 mM citric acid (n = 4) solution gave a coefficient of variation of 1.43%. Additions of metal ions, such as Ag⁺, Pb²⁺, Cu²⁺, Fe³⁺ and Ca²⁺, were found not to interfere. The effects of hesperidin, cysteine, ethylenediaminetetraacetic acid (EDTA), ascorbic, formic, malic, malonic, tartaric, oxalic and trichloroacetic acids on the determination of citric acid were examined and, under the conditions employed, only oxalic acid and EDTA were found to give any significant interference. The sensors were evaluated by carrying out citric acid determinations on spiked and unspiked samples of an acid citrate dextrose (ACD) formulation, lime flesh and juice. For lime juice, recoveries were calculated to be 96.8% (% CV = 2.7%) for a sample fortified with 5% citric acid and for ACD 99.4% (%CV = 2.6%) when fortified at 2.30% citric acid. Further studies showed the possibility of determining citric acid concentrations in lime juice and fruit directly, without the need for an added electrolyte. These performance characteristics indicate that reliable data may be obtained for citric acid measurements in such samples. To our knowledge, this is the first report on the electrocatalytic oxidation of citric acid and its application using a CoPC-SPCE.     

Analysis of methotrexate and its eight metabolites in cerebrospinal fluid by solid-phase extraction and triple-stacking capillary electrophoresis

We establish a triple-stacking capillary electrophoresis (CE) separation method to monitor methotrexate (MTX) and its eight metabolites in cerebrospinal fluid (CSF). Three stacking methods with different mechanisms were combined and incorporated into CE separation. Complete stacking and sharp peaks were achieved. Firstly, the optimized buffer (60 mM phosphate containing 15% THF and 100 mM SDS) was filled into the capillary, which was followed by the higher conductivity buffer (100 mM phosphate, 2 psi for 45 s). The analytes extracted from CSF were injected at 2 psi for 99.9 s, which provided long sample zones and pH junction for focusing. Finally, the stacking step was performed by sweeping, and separation was achieved by micellar electrokinetic chromatography. The results of the linear regression equations indicated high linearity (r ≥ 0.9981) over the range of 0.5–7 μM. In intra- and inter-batch results, all data of RSD and RE were below 11%, indicating good precision and accuracy of this method. The LODs (S/N = 3) were 0.1 μM for MTX, 7-hydroxymethotrexate (7-OHMTX) and MTX-polyglutamates (MTX-(Glu) _{n, n = 2–5}), 0.2 μM for MTX-(Glu)₆, and 0.3 μM for 2,4-diamino-N ¹⁰-methylpteroic acid (DAMPA) and MTX-(Glu)₇. Our method was implemented for analysis of MTX and its metabolites in the CSF, and could be used for evaluation of its curative effects of acute lymphoblastic leukemia patients. The data were also confirmed by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. The results showed good coincidence.