共查询到19条相似文献,搜索用时 250 毫秒
1.
分析了直螺线管磁场缺陷的来源,考虑了电子束的空间电荷作用,采用数值方法模拟计算了磁场缺陷对电子束横向温度的影响 ,获得了电子冷却装置中直螺线管磁场的均匀性要求.结果表明,当相对磁场缺陷小于1× 1 0-3时 ,影响可以被忽略.In order to obtain the tolerance requirement for the magnetic field homogeneity of the solenoids in electron cooling device, the source of the magnetic imperfection and its influence on the transverse temperature of electron beam were investigated by means of numerical simulation, and taking the space charge effect of electron beam into account. The calculated result shows that the influence of the imperfection of magnetic field will be negligible when the relative magnetic field... 相似文献
2.
Design Consideration of 650-MHz Circular Electron-Positron Collider Klystron and Simulation of Its Beam Tester
下载免费PDF全文
![点击此处可从《中国物理快报》网站下载免费的PDF全文](/ch/ext_images/free.gif)
《中国物理快报》2017,(1)
We present the first phase RD for the 800 kW cw, 650 MHz klystron for the future circular electron-positron collider(CEPC) project in China. The CEPC requires 192 klystrons and it is desired to be designed in the Institute of High Energy Physics,CAS, and manufactured domestically. Therefore,we present the manufacturing schedule of this project; the three-stage development from the beam test tube to the klystron having a high efficiency structure. Design of the beam test tube that comprises electron gun and collector is presented. First, gun simulation having a modulating anode is performed using DGUN software. The uniform beam trajectories with a beam perveance of 0.64 μA/V~(3/2) are simulated. We employ a Ba-dispenser cathode of radius 35 mm with φ10 hole at the center and obtain a current density on cathode less than 0.45 A/cm~2. The beam trajectories are also simulated over beam test tube of length about 2 m with a magnetic field of 213 Gauss. Thermal analysis of the collector is performed using the ANSIS-CFX code and hence the cooling structure is determined. Mechanical design is almost carried out and it is in manufacturing stage. 相似文献
3.
Commissioning of electron cooling in CSRe 总被引:1,自引:0,他引:1
杨晓东 冒立军 李国宏 李杰 马晓明 晏太来 原有进 宋明涛 杨建成 刘勇 赵铁成 夏佳文 张玮 高大庆 周忠祖 燕宏斌 毛瑞士 何源 韩少斐 郑建华 杨晓天 赵红卫 肖国青 殷达钰 李朋 贾欢 Parkhomchuk Vasily Reva Vladimir Skorobogatov Dmitry 《中国物理 C》2010,34(7):998-1004
The 400 MeV/u 12C6+ ion beam was successfully cooled by the intensive electron beam near 1 A in CSRe.The momentum cooling time was estimated near 15 s.The cooling force was measured in the cases of difierent electron beam profiles,and the difierent angles between the ion beam and electron beam.The lifetime of the ion beam in CSRe was over 80 h.The dispersion in the cooling section was confirmed as positive close to zero.The beam sizes before cooling and after cooling were measured by the moving screen.The beam diameter after cooling was about 1 mm.The bunch length was measured with the help of the signals from the beam position monitor.The difiusion was studied in the absence of the electron beam. 相似文献
4.
A practical 2.45-GHz microwave-driven Cs-free Hˉ source was improved based on the experimental Hˉ source at Peking University(PKU). Several structural improvements were implemented to meet the practical requirements of Xi'an Proton Application Facility(XiPaf). Firstly, the plasma chamber size was optimized to enhance the plasma intensity and stability. Secondly, the filter magnetic field and electron deflecting magnetic field were enhanced to reduce co-extracted electrons. Thirdly, a new two-electrode extraction system with farther electrode gap and enhanced water cooling ability to diminish spark and sputter during beam extraction was applied. At last, the direct Hˉ current measuring method was adopted by the arrangement of a new pair of bending magnets before Faraday cup(FC) to remove residual electrons. With these improvements, electron cyclotron resonance(ECR) magnetic field optimization experiments and operation parameter variation experiments were carried out on the Hˉ ion source and a maximum 8.5-mA pure Hˉ beam was extracted at 50 kV with the time structure of 100 Hz/0.3 ms. The root-mean-square(RMS) emittance of the beam is 0.25 Π·mm·mrad. This improved Hˉ source and extraction system were maintenance-free for more than 200 hours in operation. 相似文献
5.
Particles in a storage ring oscillate in the longitudinal and transverse dimensions. Therefore, the signal that beam has generated can be analyzed in the frequency domain to extract many beam parameters, such as tune, momentum spread, emittance and their evolution with time and so on. In this paper, the transverse spectrum in HIRFL-CSR was simulated and analyzed under different conditions, including electron cooling, hollow electron beam, solenoid effect, the tune shift caused by power supply ripple and the misalignment between ion and electron beams. The result of the simulation shows that the longitudinal magnetic field of the electron cooling device should be compensated by a “compensation solenoid”, and the power supply ripple must be controlled, otherwise the accumulation would be affected and the beam would be lost. 相似文献
6.
In this paper, we focus on a PIG source for producing intense H-ions inside a 9 MeV cyclotron. The properties of the PIG ion source were simulated for a variety of electric field distributions and magnetic field strengths using a CST particle studio. After analyzing the secondary electron emission (SEE) as a function of both magnetic and electric field strengths, we found that for the modeled PIG geometry, a magnetic field strength of 0.2 T provided the best results in terms of the number of secondary electrons. Furthermore, at 0.2 T, the number of secondary electrons proved to be greatest regardless of the cathode potential. Also, the modified PIG ion source with quartz insulation tubes was tested in a KIRAMS-13 cyclotron by varying the gas flow rate and arc current, respectively. The capacity of the designed ion source was also demonstrated by producing plasma inside the constructed 9 MeV cyclotron. As a result, the ion source is verified as being capable of producing an intense H- beam and high ion beam current for the desired 9 MeV cyclotron. The simulation results provide experimental constraints for optimizing the strength of the plasma and final ion beam current at a target inside a cyclotron. 相似文献
7.
Linewidth of electromagnetically induced transparency under motional averaging in a coated vapor cell
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The linewidth of electromagnetically induced transparency(EIT) in a coated Rb vapor cell was studied under a magnetic field gradient.The nonlinear broadening of the EIT linewidth with the magnetic field gradient was observed.It was found that the motional averaging of the field gradient was more pronounced at higher laser intensities and larger beam sizes.In the same regime,there was a small linewidth decrease with the increasing magnetic field gradient.We have established a Monte-Carlo model,which gave results in good qualitative agreement with our experiment.Physics pictures for the above phenomena were also suggested.These results provide an understanding of the EIT linewidth behavior under motional averaging,and should be useful for applications in quantum optics and metrology based on coated vapor cells. 相似文献
8.
Linewidth of electromagnetically induced transparency under motional averaging in coated vapor cell
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
The linewidth of electromagnetically induced transparency (EIT) in a coated Rb vapor cell was studied under a magnetic field gradient. The nonlinear broadening of the EIT linewidth with the magnetic field gradient was observed. It was found that the motional averaging of the field gradient was more pronounced at higher laser intensities and larger beam sizes. In the same regime, there was a small linewidth decrease with the increasing magnetic field gradient. We have established a Monte-Carlo model, which gave results in good qualitative agreement with our experiment. Physics pictures for the above phenomena were also suggested. These results provide an understanding of the EIT linewidth behavior under the motional averaging, and should be useful for applications in quantum optics and metrology based on coated vapor cells. 相似文献
9.
10.
Theoretical research on electron beam modulation in a field-emission cold cathode electron gun
下载免费PDF全文
![点击此处可从《中国物理 B》网站下载免费的PDF全文](/ch/ext_images/free.gif)
In order to develop miniaturized and integrated electron vacuum devices, the electron beam modulation in a field- emission (FE) electron gun based on carbon nanotubes is researched. By feeding a high-frequency field between the cathode and the anode, the steady FE electron beam can be modulated in the electron gun. The optimal structure of the electron gun is discovered using 3D electromagnetism simulation software, and the FE electron gun is simulated by PIC simulation software. The results show that a broadband (74-114 GHz) modulation can be achieved by the electron gun with a rhombus channel, and the modulation amplitude of the beam current increases with the increases in the input power and the electrostatic field. 相似文献
11.
在HIRFL-CSR实验环电子冷却装置上采用了独立的高精度螺线管串联产生纵向磁场的设计,获得很高的冷却段磁场平行度。使用霍尔片测量磁场的分布,使用磁针测磁方法测量冷却段磁场的磁轴偏角,并根据测量及计算结果对单个线圈磁轴进行微调。测量及调试结果表明,在施加电流为额定电流的一半时,冷却段磁感应强度为0.078 T,剩余磁场小于2×10-4 T,磁场不平行度小于1×10-4,达到了预期的设计目标。 相似文献
12.
在HIRFL-CSR实验环电子冷却装置上采用了独立的高精度螺线管串联产生纵向磁场的设计,获得很高的冷却段磁场平行度。使用霍尔片测量磁场的分布,使用磁针测磁方法测量冷却段磁场的磁轴偏角,并根据测量及计算结果对单个线圈磁轴进行微调。测量及调试结果表明,在施加电流为额定电流的一半时,冷却段磁感应强度为0.078 T,剩余磁场小于2×10-4 T,磁场不平行度小于1×10-4,达到了预期的设计目标。 相似文献
13.
L. V. Zinovyev A. V. Smirnov A. S. Sergeev S. V. Semenov S. Y. Kolesnikov E. A. Kulikov Y. A. Tumanova A. V. Alfeyev M. I. Bryzgunov A. V. Bubley V. B. Reva 《Physics of Particles and Nuclei Letters》2018,15(7):745-748
In order to achieve the required beam parameters in the NICA booster, the electron cooling system (ECS) was designed and manufactured at the Institute of Nuclear Physics (INP), Novosibirsk. In 2017, the system was shipped to JINR and its assembly and commissioning started. A specific feature of this system is that, for the first time ever, the electron cooling method with a magnetized e-beam is applied at the superconducting synchrotron; this imposes some additional requirements for the design and start of the ECS, operating at room temperature. This paper describes the main steps of the ECS assembly and start at the straight section of the booster, including mounting mechanical, electrical, and plumbing systems (water, electricity, air, and oil system) and geodetic works on installing the system on site. The measured magnetic field homogeneity for the straight solenoid is given. The assembly of vacuum and magnet systems takes several steps because of the ECS design features. At the final assemblage stage of the vacuum system, the vacuum chamber is baked up and the bulk getters and the cathode of the electron gun are activated. Upon completing assembly and testing the high voltage system, the E-beam is conducted from the gun to the collector. 相似文献
14.
Booske J.H. Radack D.J. Antonsen T.M. Jr. Bidwell S.W. Carmel Y. Destler W.W. Freund H.P. Granatstein V.L. Latham P.E. Levush B. Mayergoyz I.D. Serbeto A. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1990,18(3):399-415
The design and feasibility of a 1-MW continuous-wave (CW) free electron laser (FEL) oscillator are reviewed. The proposed configuration includes a short-period (I w~ 1 cm) planar wiggler, a sheet electron beam, a 0.5-1.0-MV thermionic electron gun, a hybrid waveguide/quasi-optical resonator, commercial DC power supplies, and a depressed collector. Cavity ohmic RF losses are estimated to be extremely low (⩽10-100 W/cm2) at 1/MW output power, while thermal heat transfer studies conservatively indicate that wall cooling up to 1500 W/cm2 should be possible. Experiments have convincingly verified theory and simulations which predict that negligible body currents will be achievable with low-emittance low-space-charge sheet beams. High-voltage sheet beam gun design studies indicate that the required beam quality can be achieved with CW compatible devices. The spent beam energy distribution is consistent with highly efficient spent beam energy recovery, and the proposed resonator cavity should provide mode discrimination and beam/RF separation capability 相似文献
15.
McDermott D.B. Balkcum A.J. Luhmann N.C. Jr. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1996,24(3):613-619
A 50-kV third-harmonic gyrotron is shown to be capable of high efficiency. Operation at the third harmonic allows the required magnetic field for 35 GHz generation to be supplied by a 4.5-kG permanent magnet. Two gyrotrons employing sliced circuits for mode control have been evaluated with a large-signal nonself-consistent particle-tracing simulation code and found to be capable of producing 25 kW continuously. The preliminary design of a third-harmonic TE41 gyrotron utilizing a magnetron injection electron gun is predicted to yield a device efficiency of 17%, which can potentially be increased to 46% with an ideal single-stage depressed collector, while an axis-encircling electron beam from a Cusp electron gun is predicted to drive a third-harmonic TE31 gyrotron with a device efficiency of 23%, which can theoretically be increased to 45% through the use of an ideal depressed collector 相似文献
16.
17.
强流重离子加速器装置(HIAF)将采用电子冷却技术,降低重离子束流的发射度和动量分散,提高核物理及原子物理实验的精度与亮度。电子冷却装置的冷却段磁场均匀度是影响冷却效率的主要参数,HIAF电子冷却装置采用多个独立高精度线圈串联产生纵向磁场的设计,获得极高的冷却段磁场均匀度。本文介绍了一种测量高精度线圈磁轴偏角的装置,采用定位装置测量线圈的几何对称轴,通过旋转霍尔探头测量线圈中心平面上的径向与轴向磁场分布,再根据磁场测量数据计算出线圈磁轴与几何对称轴之间的偏角。实际测量表明该装置的磁轴偏角测量精度达到±0.10 mrad。测量得到的HIAF电子冷却装置冷却段线圈样品的磁轴偏角为(1.28±0.10)mrad,达到设计要求。 相似文献
18.
Piosczyk B. Iatrou C.T. Dammertz G. Thumm M. 《IEEE transactions on plasma science. IEEE Nuclear and Plasma Sciences Society》1996,24(3):579-585
Two 140 GHz gyrotrons with a single-step depressed collector have been operated. The different position of the isolating collector gap in the stray magnetic field causes the electron motion in the retarding region to be in one case adiabatic and in the other case nonadiabatic. The kind of motion within the retarding field influences strongly the behavior of the gyrotron with a depressed collector. In the case of nonadiabatic motion a significant amount of transverse momentum is given to the electrons reflected at the collector potential. This causes the reflected electrons to be trapped between the magnetic mirror and the collector. The electrons escape from the trap by diffusion across the magnetic field to the body of the tube thus contributing to the body current. Despite the high body current there is no observable influence of the collector voltage on the RF output power. In the case of adiabatic motion the reflected electrons do not gain a sufficient amount of transverse momentum to be trapped by the magnetic mirror. They pass the cavity toward the gun and they are trapped between the negative gun potential and the collector. The interaction with the RF field by electrons traveling through the cavity enhances the diffusion in the velocity space thus enabling the trapped electrons to overcome the potential barrier and escape toward the collector. Therefore the body current stays at low values since in this case the reflected electrons do not contribute to it. However, at higher collector voltages a reduction of RF power occurred and some noise in the electron beam was observed 相似文献
19.
设计了一套0.22THz折叠波导行波管电子光学系统,详细介绍了电子枪和周期永磁聚焦系统的设计过程,在电子枪电子束束腰与磁系统不匹配情况下,对磁场过渡区进行了优化设计,以此为基础利用磁场仿真软件对磁场进行模拟和优化,并把磁场位形代入电磁仿真软件进行电子束传输仿真,优化后的电子光学系统发射束流10mA,阴极电压15kV,束流通过率96%。通过实验验证,流通管束流通过率93%,高频样管束流通过率94%,与设计相符。高频样管实现连续波运行,功率大于0.4 W,3dB带宽大于12GHz。 相似文献