ss—DNA在纳米金上固载和杂化的化学传感研究

将２－氨乙基硫醇（ＡＥＴ）固载到玻碳电极（ＧＣＥ）表面,进而化学吸附纳米金（ＮＧ）,并在纳米金上固载ss－ＤＮＡ得到ss－ＤＮＡ／ＮＧ／ＡＥＴ／ＧＣＥ,以Ｃo（ｂｐ ｙ）３＾３＋,但用pＨ７．０的磷酸缓冲液浸泡可基本上避免这种变性,并时显提高杂化反应的识别能力。结合在ds－ＤＮＡ／ＮＧ／ＡＥＴ／ＧＣＥ上的Ｃo（bpy）３＾３＋的峰电流与扫速的线性关系可保持到８０mＶ／s,与电沉积法固载纲米金相比较,本电极更稳定     

Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Herein, we are described a green route to prepare reduced graphene oxide supported cobalt inorganic complex nanocomposite (GRGO/[Co(bpy)₃]) (bpy=2,2′‐bipyridine) through facile and wet chemical approach. The formation of the nanocomposite was confirmed through suitable physical and chemical characterization techniques. The GRGO/[Co(bpy)₃] nanocomposite was coated on the pretreated glassy carbon electrode (GCE). The GCE/GRGO/[Co(bpy)₃] modified electrode has excellent electrocatalytic ability towards methyl parathion reduction, while the overpotential drops drastically to –0.18 V (vs. Ag/AgCl). Moreover, the effect of concentration, scan rate and electrolyte pH were detail studied. Besides, the linear response range was 0.05‐1700 μM and the detection limit was 0.0029 μM (S/N=3) and the sensitivity was 1.8197 μA μM⁻¹ cm⁻². Moreover, the fabricated electrode has high level of selectivity, which delivers satisfactory repeatability, reproducibility and stability. The sensing method was successfully demonstrated in real samples such as, tomato and apple samples.     

ss-DNA在纳米金上固载和杂化的电化学传感研究

将2-氨乙基硫醇(AET)固载到玻碳电极(GCE)表面,进而化学吸附纳米金(NG),并在纳米金上固载ss-DNA得到ss-DNA/NG/AET/GCE,以Co(bpy)₃³⁺为电化学指示剂可以识别研究ss-DNA的杂化反应.结果表明,纳米金能使固载其上的ss-DNA发生部分变性而结合Co(bpy)₃³⁺,但用pH7.0的磷酸缓冲液浸泡可基本上避免这种变性,并明显提高杂化反应的识别能力.结合在ds-DNA/NG/AET/GCE上的Co(bpy)₃³⁺的峰电流与扫速的线性关系可保持到80mV/s.与电沉积法固载纳米金相比较,本电极更稳定和可靠.     

玻碳电极上Ru（bpy）3^2＋的吸附及其电致化学发光的研究

通过电化学循环伏安法和电致化学发光方法,研究了Ru(bpy)32 在玻碳电极上的吸附,研究结果表明,2Ru(bpy)3 的浓度和与玻碳材料接触的时间,直接影响了Ru(bpy)32 在玻碳上的吸附.还考察了吸附的Ru(bpy)32 在玻碳电极上被氧化后脱附的情况.     

基于杂环羧酸配体的金属有机骨架化合物合成、表征及性质研究

以噻吩-2,5-二羧酸为主要配体,借助第二配体----4,4-联吡啶或者邻菲罗啉通过水热法合成了三种MOFs材料,分别是[Cd (tdc) (bpy)]n、[Zn (tdc) (bpy)]n、[Co (tdc) (phen)]n。利用X射线单晶衍射仪、红外光谱仪对三种MOFs材料进行了结构表征与分析,同时利用荧光光谱仪、热重分析仪和电化学工作站测定了三种MOFs材料的荧光性质、热稳定性和MOFs材料修饰玻碳电极的电化学行为,结果表明,三种MOFs材料比配体更好的荧光强度和热稳定性,制备的[Co (tdc) (phen)]n修饰玻碳电极,对铁氰化钾溶液和含1.0mmol/L NaNO2的pH = 5 PBS溶液,均比裸玻碳电极表现出更强的循环伏安响应,有望作为修饰剂应用于修饰玻碳电极中。     

Dechlorination of beta-methylallyl chloride by electrogenerated [Co(I)(bipyridine)3]+: an electrochemical study in the presence of cationic surfactants

We have investigated the electrocatalytic dehalogenation of beta-methylallyl chloride (beta-mAC), widely used in the polymer industry, using [Co(I)(bpy)3]+ (where bpy=2,2'-bipyridine) electrochemically generated in situ from [Co(II)(bpy)3]2+ at a glassy carbon electrode in the presence of three different cationic surfactants in aqueous solution. Cetyltrimethylammonium bromide (CTAB), tetradecyltrimethylammonium bromide (TDTAB), and cetylbenzyldimethylammonium chloride (CBDAC) were employed in the present investigation. The [Co(II)(bpy)3]2+-cationic surfactant systems show excellent electrocatalytic activity toward dehalogenation of beta-mAC. The dependence of the catalytic current, the corresponding potential, and the current function on the potential scan rate has been analyzed to assess the nature of the catalytic reaction. The second-order rate constant, kchem, for the reaction between the beta-mAC substrate and the electrogenerated-micelle stabilized-Co(I) complex has been calculated by a cyclic voltammetry technique. The reduction products after 3 h of bulk electrolysis have been identified by GC/MS to be one nonchloro compound (2-methyl-1,5-hexadiene (IV)) and two chloro compounds (1-chloro-2,5-dimethyl-2,5-hexadiene (V) and spiro[1.2]cylopropyl-6-chloro-5-methyl-hex-4-ene (VI)). Based on the electrochemical results and the mass spectral data, a reaction scheme involving all the reduction products has been proposed. Finally, a good correlation between the catalytic efficiency and the structural features of the surfactant molecules is demonstrated. The present study emphasizes the need for further optimization work to achieve maximum yield of nonchloro compound (IV) to employ the present [Co(II)(bpy)3]2+-cationic surfactant systems with a high catalytic efficiency as promising for possible applications.     

DNA Immobilization on Nano-Gold Modified Glassy Carbon Electrode

IntroductionTheimmobilizationofDNAonanelectronicallyconductivesurfaceisofinterestbothinthestudyofDNAitselfandinvariousapplications.Forexample,immobilizationofDNAonanelectrodeisusedtoproduceDNAbiosensors.VariousDNAelectrochemicalblosensorshavebeenpreparedbyimmobilizingDNAonthesurfaceofglassycarbon,carbonpasteandgoldelectrodes'-'.Thepropertiesofnano-scalegoldandbulkgoldexhibitseveraldifferences.Morenoteworthyarethesurfacecharge,highsurfaceareaandbiocompatibilityofnano-scalegold'.Thestrat…     

Tris(2,2′-bipyridyl)cobalt(III)-doped silica nanoparticle DNA probe for the electrochemical detection of DNA hybridization

A new and sensitive electrochemical DNA hybridization detection assay, using tris(2,2′-bipyridyl)cobalt(III) [Co(bpy)₃³⁺]-doped silica nanoparticles as the oligonucleotide (ODN) labeling tag, and based on voltammetric detection of Co(bpy)₃³⁺ inside silica nanoparticles, is described. Electro-active Co(bpy)₃³⁺ is not possible for directly linking with DNA, it is doped into the silica nanoparticles in the process of nanoparticles synthesis for DNA labeling with trimethoxysilylpropydiethylenetriamine (DETA) and glutaraldehyde as linking agents. The Co(bpy)₃³⁺ labeled DNA probe is used to hybridize with target DNA immobilized on the surface of glassy carbon electrode. Only the complementary sequence DNA (cDNA) could form a double-stranded DNA (dsDNA) with the DNA probe labeled with Co(bpy)₃³⁺ and give an obvious electrochemical response. A three-base mismatch sequence and non-complementary sequence had negligible response. Due to the large number of Co(bpy)₃³⁺ molecules inside silica nanoparticles linked to oligonucleotide DNA probe, the assay showed a high sensitivity. It allows the detection at levels as low as 2.0×10⁻¹⁰ mol l⁻¹ of the target oligonucleotides.     

多壁碳纳米管/壳聚糖-联吡啶钌复合物修饰的石墨电极上电化学发光行为的研究及分析应用

基于盐酸曲马多对联吡啶钌(Ru(bpy)32+)的电化学发光信号有较强的增敏作用, 建立了一种多壁碳纳米管/壳聚糖-联吡啶钌复合物修饰的石墨电极上电化学发光检测盐酸曲马多的电化学发光新方法. 通过循环伏安扫描结果表明, 多壁碳纳米管表现出极好的电分析活性, 对联吡啶钌具有较好的电催化作用, 并可应用于盐酸曲马多药物的测定. 在最佳实验条件下, 测定曲马多浓度在6.0×10-4～5.0×10-6 mol/L与相对发光强度成线性关系(r=09982), 检出限(S/N=3)为2.0×10-6 mol/L. 连续平行测定曲马多溶液(5.0×11-5 mol/L) 8次, 发光强度的RSD为3.1%.     

Co(phen)2TATP3+与DNA在旋转金盘金环电极上的相互作用研究

在pH=7.2的Tris缓冲溶液中,利用旋转环盘电极法研究了金电极上Co(phen)₂TATP³⁺与DNA的相互作用,并根据扩散控制和电化学控制下得到的各种参数,对它们作用的模式进行了讨论.发现当一定量的DNA存在时,Co(phen)₂TATP³⁺的扩散系数、还原反应的传递系数和半波电位下的速率常数、还原产物Co(phen)₂TATP²⁺的收集系数和脱出率等都发生了较大幅度的减小.利用Co(bpy)₃³⁺进行比较研究表明,Co(phen)₂TATP³⁺与Co(bpy)₃³⁺在加入DNA后在收集系数和传递系数变化上存在较大的差异.     

L-半胱氨酸修饰金电极电化学发光法测定罗红霉素

在裸金电极上制备了L-半胱氨酸自组装膜修饰电极(L-Cys-Au/SAM/CME).考察了联吡啶钌和罗红霉素在此修饰电极上的电化学及其发光行为.结果表明,此修饰电极表现出了很好的电化学活性和电化学发光(ECL)响应.基于罗红霉素的存在可增大了联吡啶钌的发光强度,建立了测定罗红霉素片的电化学发光分析方法.在最佳实验条件下,罗红霉素浓度在1.0×10-7～1.0×10-4 mol/L范围内与其相对发光强度呈线性关系,其线性回归方程为I=2×107C+384.02, r=0.9977; 检出限(S/N=3)为1.0×10-7 mol/L.连续测定1.8×10-5 mol/L罗红霉素10次,发光强度的RSD为1.93% , 表明此修饰电极具有较好的重现性,并将本方法用于罗红霉素片剂的检测.     

Fabrication and Photoelectrochemical Properties of [Ru(bpy)2dppz]2+ on ITO Electrode Associated with the Oxidation of Guanine

<正>Electrochemical assembly of[Ru(bpy)_2dppz]~(2+){bpy=2,2'-bipyridine,dppz=dipyrido[3,2-a:2',3'-c]phenazine} on an ITO electrode in the presence of guanine and photoelectrochemical properties of the assembled layer were investigated.It has been found that[Ru(bpy)_2dppz]~(3+/2+) can be assembled onto the ITO electrode by the method of repetitive voltammetric sweeping,and the assembly is enhanced by guanine.The peak currents of prewaves increase linearly up to a guanine concentration of 0.25 mmol/L.More importantly,upon illumination with 470 nm light source and at an applied potential of 0.2 V,cathodic current for the fabricated layer on the ITO electrode indicate a linear enhancement with the rise of guanine concentration.Meanwhile,[Ru(bpy)_2dppz]~(2+) can be served as an excellent mediator to prompt the oxidation of guanine,and the mediated peak current increases linearly with added guanine concentration from 0.01 to 0.25 mmol/L.In addition,the assembly mechanism of[Ru(bpy)_2dppz]~(2+) on the ITO electrode associated with the oxidation of guanine and the assistance of light irradiation were discussed.     

Electrochemiluminescence of Ru(II) complexes immobilized on a magnetic microbead surface: distribution of magnetic microbeads on the electrode surface and effect of azide ion

The electrochemiluminescence (ECL) of magnetic microbeads modified with tris(2,2'-bipyridine)ruthenium(II) ([Ru(bpy)3]2+) was studied in the presence of tri-n-propylamine (TPA) to develop highly sensitive ECL detection system, where the employed microbead has a diameter of 4.5 microm. The ECL signal of the [Ru(bpy)3]2+ derivative-modified magnetic microbeads was found to be affected by the geometrical distribution of the magnetic microbeads on the electrode surface. The ECL peak intensity increased with increasing the number of the beads on the electrode surfaces up to 1.6 x 10(6) beads cm(-2), although above 1.6 x 10(6) beads cm(-2), it decreased. The ECL decrease arises from the physical prevention of the ECL from reaching the photomultiplier tube by the excessive beads. The observed peak ECL signal of the [Ru(bpy)3]2+ derivative-modified magnetic microbeads in the presence of NaN3, which serves as a preservative substance, mainly appeared at a potential of +0.90 V vs Ag/AgCl where [Ru(bpy)3]2+ is hardly oxidized, whereas the ECL signal in the absence of NaN3 appeared at a potential of +1.15 V. The presence of NaN3 on the electrode surface retards formation of an oxide layer on the electrode surfaces and promotes TPA oxidation. The ECL response at +0.90 V was mainly attributed to ECL reaction of excited-state [Ru(bpy)3]2+* formed by oxidation of [Ru(bpy)3]+ with TPA radical cation, where the [Ru(bpy)3]+ was generated by reduction of [Ru(bpy)3]2+ with TPA radical.     

Two Dawson-templated three-dimensional metal-organic frameworks based on oxalate-bridged binuclear cobalt(II)/Nickel(II) SBUs and Bpy linkers

The Dawson anion P 2W 18O 62 (6-) has been used as a noncoordinating polyoxoanion template for the construction of two metal-organic frameworks, namely, [M 2(bpy) 3(H 2O) 2(ox)][P 2W 18O 62]2(H 2-bpy). nH 2O (M = Co(II), n = 3 ( 1); M = Ni(II), n = 2 ( 2)) (bpy = 4,4'-bipyridine; ox = C 2O 4 (2-)). Single-crystal X-ray analysis reveals that both of the structures exhibit 3D host frameworks constructed from the oxalate-bridged binuclear superoctahedron secondary building units (SBUs) and bpy linkers and the voids of which are occupied by Dawson anions, guest bpy, and water molecules. Magnetic studies reveal that there are antiferromagnetic exchange interactions among the transition-metal centers in compounds 1 and 2. Furthermore, a compound 1-modified carbon paste electrode ( 1-CPE) displays good electrocatalytic activity toward the reduction of nitrite.     

Flow injection determination of cobalt after its sorption onto polyurethane foam loaded with 2-(2-thiazolylazo)-p-cresol (TAC)

An electrochemically stable monolayer of tris(2,2'-bipyridyl)ruthenium(II) was obtained for the first time. It was based on the electrostatic attachment of Ru(bpy)(3)(2+) to the benzene sulfonic acid monolayer film, which was covalently bound onto glassy carbon electrode by the electrochemical reduction of diazobenzene sulfonic acid. The surface-confined Ru(bpy)(3)(2+) underwent reversible surface process, and reacted with the coreactant, tripropylamine, to produce electrochemiluminescence. In view of the stability of the electrode, the results strongly suggested that light was emitted from the surface-confined Ru(bpy)(3)(2+), not from the detached Ru(bpy)(3)(2+). The Ru(bpy)(3)(2+) modified electrode was used to the determination of tripropylamine. It showed good linearity in the concentration range from 5 muM to 1 mM with a detection limit of 1 muM (S/N=4). The good stability of the Ru(bpy)(3)(2+) modified electrode also showed that the benzene sulfonic acid monolayer film prepared can be served as an excellent support to construct multilayers.     

钌(II)多吡啶配合物的合成、荧光性质及与脱氧核糖核酸DNA的 作用机制研究

设计合成含多个配位中心的多吡啶配体ODCIP (3,4-二氯基苯并咪唑并[4,5-f][1,10]邻菲咯啉)及其钌(II)多吡啶配合物[Ru(bpy)2ODCIP]2＋. 运用元素分析、红外光谱、核磁谱和质谱对配体及配合物进行结构表征. 利用紫外吸收光谱、荧光光谱和粘度法研究了[Ru(bpy)2ODCIP]2＋与DNA(脱氧核糖核酸)的作用机制、与Co2＋配位后与DNA的作用机制及其荧光变化情况. 结果表明[Ru(bpy)2ODCIP]2＋与DNA通过部分插入模式作用, [Ru(bpy)2ODCIP]2＋与Co2＋配位形成的双核配合物[Ru(bpy)2(ODCIP)Co]4＋也能与DNA插入结合. 进一步利用稳态荧光发射光谱、荧光淬灭实验等方法研究了单核配合物[Ru(bpy)2ODCIP]2＋和双核配合物[Ru(bpy)2(ODCIP)Co]4＋的荧光性质.     

碳纳米管负载铂修饰玻碳电极用于电化学发光的研究及其对富马酸酮替芬的测定

在玻碳电极上制备了碳纳米管负载纳米铂修饰电极(Pt-MWCNTs/GCE)。考察了联吡啶钌和富马酸酮替芬在3个不同电极上的电化学及其发光行为,并对其进行了对比。结果表明,在Pt-MWCNTs/GCE上富马酸酮替芬对联吡啶钌的电化学发光强度有明显的增敏作用,其增敏效果约为MWCNTs/GCE电极的2倍,约为裸玻碳电极的3.5倍,据此,建立了一种Pt-MWCNTs/GCE电极上电化学发光法检测富马酸酮替芬的新方法。在优化实验条件下,富马酸酮替芬的浓度在1.0×10-7～1.0×10-4mol/L范围内与其相对发光强度呈线性关系,线性回归方程为I=48.805×106c+221.03(r=0.9969),检出限为2.4×10-9mol/L,连续平行测定1.0×10-5mol/L的富马酸酮替芬溶液5次,发光强度的RSD为3.3%。对样品进行回收率实验,回收率为99%～104%,RSD为2.1%。     

Nafion–RuO2–Ru(bpy)3 composite electrodes for efficient electrocatalytic water oxidation

Electrocatalytic water oxidation to evolve O₂ was studied on a Nafion–RuO₂–Ru(bpy)₃²⁺ composite electrode. The O₂ evolution current efficiency was largely improved for the multi-component electrode over the Nafion–RuO₂ and Nafion–Ru(bpy)₃²⁺ individuals. The redox mediation through the Ru(bpy)₃²⁺ was found to dominate over the RuO₂ catalytic effect in the water oxidation mechanism. The specific surface area of the RuO₂, which was prepared at different temperatures (300–700°C), used in fabricating the composite electrode also played an important role in the overall water oxidation mechanism. Both the reaction and electrode parameters were optimized to get effective electrocatalytic current values in this study.     

DHP和SWCNTs促进[Ru(bpy)2tatp]3+/2+在ITO上的电化学组装

应用循环伏安法和微分脉冲伏安法研究了[Ru(bpy)2tatp]3+/2+(bpy=2,2′-联吡啶, tatp=1,4,8,9-四氮三联苯)在ITO表面上的电化学组装及双十六烷基磷酸盐(DHP)和单壁碳纳米管(SWCNTs)对其组装效果的影响. 研究结果表明, [Ru(bpy)2tatp]2+在ITO电极上1.057 V(vs. Ag/AgCl)电位下呈现出清晰的扩散控制峰. 随着连续伏安扫描次数的增多, 微分脉冲伏安图逐渐呈现出明显的吸附控制峰. 当DHP浓度在0.05~0.22 mmol/L区间内时, 不管有无SWCNTs存在, DHP均能增强[Ru(bpy)2tatp]2+在缓冲溶液中的扩散系数和促进其在ITO上的电化学组装, 而SWCNTs在其中起减弱作用. 讨论了DHP和SWCNTs参与的[Ru(bpy)2tatp]3+/2+在ITO上的电化学组装机理.     

多吡啶钴(Ⅲ)配合物与Zn2+形成的新型“关-开”荧光探针

近十几年来,对小分子过渡金属配合物与大分子DNA键合与识别机理的研究一直是国际上生物无机化学领域十分活跃的研究课题[1￣3],已发展了一系列具有特定功能的配合物,如DNA结构探针和DNA荧光探针等。与其他类型的金属配合物相比,八面体过渡金属多吡啶配合物具有丰富的光化学和光物理信息,当这些配合物与DNA相互作用时,由于结构匹配或微环境的差异,配合物的光谱特征会出现不同程度的改变,从而达到对DNA的检测。传统的DNA荧光探针有[Ru(bpy)2dppz]2 和[Ru(phen)2dppz]2 (bpy=2,2′-联吡啶,phen=1,10-菲咯啉,dppz=二吡啶[3,2-a∶2′,3′…