2—取代—1,7—二氧螺（4.4）壬—8—酮的合成研究

分别用Ｋ２ＣＯ３，１，５－二氮双环（４．３．０）壬－５－烯（ＤＢＮ）和四丁基氟化铵（ＴＢＡＦ）等碱催化３－（３－羟基丙基）－γ－丁烯酸内酯的分子内Ｍｉｃｈｅａｌ加成反应合成了２－取代－１，７－二氧螺（４．４）壬－８－酮     

螺双内酯及其衍生物化学的研究进展

螺双内酰是一类含双内酯环和螺碳原子这一特定结构的化合物。这种特定螺双内酯结构决定了这类化合物具有特殊的物理和化学性质。本文主要综述了螺双内酯及衍生物的合成方法、衍生化反应、手性拆分以及在合成高分子领域的研究现状和进展。     

螺噻唑并咪唑类化合物的合成

由螺［５．５］十一烷－３－酮与硫脲在碘的存在下反应，生成了４，５－二氢螺［苯并［ｄ］噻唑－６－（７Ｈ），１′－环己烷］－２－胺（３），３与溴甲基苯基甲酮在苯中缩合得到相应的酮４ａ～４ｃ，然后在醇中加热环化生成二氢螺［咪唑并［２，１－ｂ］苯并［ｄ］噻唑］化合物５ａ～５ｃ。新化合物５ａ～５ｃ的分子组成及结构经元素分析、１ＨＮＭＲ、１３ＣＮＭＲ证实，其中产物５ｂ的分子结构经Ｘ－射线衍射晶体分析确认。     

多手性中心的螺-环丙烷类化合物的合成

研究了 5 (l 孟氧基 ) 3 溴 2 ( 5H) 呋喃酮新手性源 ( 1)与亲核性醇类化合物发生的串联不对称双Michael加成 /分子内亲核取代反应 ,通过此反应 ,一举生成了 4个新的手性中心 ,得到了一般方法难以合成的含有多个手性中心的丁内酯并螺 环丙烷类化合物 5a～ 5d .详细报道了 5a～ 5d的合成方法以及它们的 [α],IR ,UV ,1HNMR ,13 CNMR ,MS和元素分析等结构分析数据 .经X 四圆衍射确定了 5 (l 孟氧基 ) 3 溴代丁内酯并 [3,4,1″,2″] 螺 [4 .2 ] [环丙烷 3″,3′ ( 4′ 甲氧基 5′ 孟氧基丁内酯 ) ]( 5a)的立体化学结构 .此不对称串联反应为进一步设计某些光学活性的复杂结构的分子提供了重要的合成途径     

螺环单体的合成、聚合及与环氧树脂的固化反应

合成了新螺环原碳酸酯单体：３，９－二（对甲氧基苄基）－１，５，７，１１－四氧杂螺环［５，５］十一烷．以ＢＦ３·ＯＥｔ２为催化剂，实现了其阳离子聚合．聚合产物的１ＨＮＭＲ、１３ＣＮＭＲ、ＩＲ及元素分析均表明发生了双开环聚合反应．探讨了其聚合历程．用ＤＳＣ和ＩＲ跟踪环氧树脂及其与螺环单体混合后的固化反应过程，研究了固化剂、反应条件对固化反应的影响     

含联萘基团旋光性聚酰亚胺的合成与性质

从１,１′－联萘－２,２′－二胺出发,合成了旋光性二酐单体及相应的外消旋体：（Ｓ）－,（Ｒ）－和（±）－２,２′－（３,３′,４,４′－四酸二酐）二苯甲酰胺－１,１′－联萘．二酐与二胺单体通过溶液缩聚反应制得一系列旋光性聚酰胺酰亚胺．聚合物具有较好的热稳定性、旋光稳定性、良好的溶解性以及独特的光学性质     

两个环己烷螺含氮杂环化合物的合成和晶体结构

环己酮与硫代碳酰肼在不同介质中的反应，合成出两个不同的环己烷螺含氮杂环化合物。经Ｘ－射线结构分析确定它们分别为１，２，４，５－四氮螺［５，５］十一烷－３－硫酮，Ｃ＿７Ｈ＿（１４）Ｎ＿４Ｓ（Ⅰ）和１，２，４，－三氮螺［４，５］癸－１－烯－４－氨基－３－硫酮。Ｃ＿７Ｈ＿（１２）Ｎ＿４Ｓ＿ｘ（Ｓ＿ｘ＝０．８Ｓ＋０．２Ｏ）（Ⅱ）。晶体学参数分别为（Ⅰ）：Ｐ２＿１／ｃ，ａ＝１２．０２６（４），ｂ＝２６．８１７（６），ｃ＝１２．０４２（３），β＝１１５．９４（２）°，Ｚ＝４，Ｖ＝９３３．４（１０），Ｍ＿ｒ＝１８６．２８；（Ⅱ）：Ｐ２＿１／ｍ，ａ＝６．５９５（７），ｂ＝６．８１７（６），ｃ＝１０．５７２（６），β＝１０６．３（１）°，Ｖ＝４５６（１），Ｚ＝２，Ｍ＿ｒ＝１８１．０５。最终一致因子分别为Ｒ＝０．０５４，Ｒ＿ｗ＝０．０６５和Ｒ＝０．０８９，Ｒ＿ｗ＝０．０９６。两个化合物中，环己烷都为椅式构型，它与其螺联的６员氮杂环，５员氮杂环的最小二乘平面间的夹角分别为６８．９４和９０°。并对合成反应途径作了初步讨论。     

3,9—二（对甲氧基苄基）—1,5,7,11—四氧杂螺环[5.5]十一烷的合成及体…

合成了新型膨胀单体３，９－二（对甲氧基苄基）－１，５，７，１１－四氧杂螺环「５．５」十一烷。以ＢＦ３．ＯＥｔ２为催化剂，在二氯乙烷中实现了其双开环阳离子聚合。此单体对热固体脂进行改性。     

含1,1′-联萘基团可溶性聚酯酰亚胺的合成与性质

从１ ,１′联２ ,２′萘酚出发合成了新型具有非共平面结构的联萘类二酐单体,即２ ,２′（３ ,３′,４ ,４′四酸二酐） 二苯甲酰氧基１ ,１′联萘． 通过联萘二酐与不同二胺单体的溶液缩聚反应制备得到了一系列新型聚酯酰亚胺． 聚合物表现出良好的溶解性、热性能及薄膜透光性．     

聚酰胺的合成——N-羟基-5-降冰片烯-2,3-双甲酰亚胺的双活性酯与脂族二胺间在温和条件下的缩聚反应

<正> 在合成聚酰胺的研究中,关于由N-羟基化合物O,O′-双酰基衍生物与二元胺在温和条件下合成聚酰胺的报道较少。Overberger及ebenda首先研究了N-羟基丁二酰亚胺的双活性酯及N-羟基邻苯二甲酰亚胺的双活性酯与派嗪间的缩聚反应。Ueda、Imai等则报道了另两类活性双酯,如1-羟基苯并三氮唑的双活性酯及O,O′-间苯二甲酰双肟与二元胺间的缩聚合成聚酰胺的结果。     

含二苯甲烷结构四元共缩聚杂萘聚芳酰胺的合成与性能

采用自制二胺1,2-二氢-2-(4-氨基苯基)-4-[4-(4-氨基苯氧基)-苯基]-二氮杂萘-1-酮、商品二胺4,4′-二氨基二苯甲烷和对苯二胺与对苯二甲酰氯进行低温溶液缩聚反应,改变三种二胺的比例,得到了一系列共聚酰胺树脂,其特性粘数为1·24~2·32dL/g,用FT-IR、1H-NMR手段研究了聚合物的结构;利用DSC和TGA研究了聚合物的耐热性能,结果表明,该类聚合物具有较高玻璃转化温度(301℃以上);氮气气氛中5%热失重温度在438℃以上;用一定比例的二胺制得的聚合物分别能溶于N-甲基吡咯烷酮、N,N-二甲基乙酰胺等非质子极性溶剂中并浇注得到韧性薄膜.     

Synthesis and characterization of new aromatic polyamides bearing crown ethers or their dipodal counterparts in the pendant structure. I. Benzo‐12‐crown‐4 and ortho‐bis(2‐ethoxyethoxy)benzene

Two novel isophthalic diacid‐based monomers have been synthesized by inclusion in ring position 5 of a functionalized benzoylamine moiety. The functionalization includes a 12‐crown‐4 ether group fused with the benzene subunit and a dipodand substructure, formally a disubstitution of the benzene ring, with two sequences of ethyl‐terminated ethylene oxide units, which represent the open‐chain counterpart of the alicylic crown moiety. The polycondensation of the two diacids with five aromatic diamines yielded 10 new polyamides with crown or podand pendant substructures. The polyamides had previously been chemically characterized by NMR, IR, and elemental analysis. The polymers showed high glass transition temperatures of up to 349 °C, good thermal stability (T_{donset, N2} ≈ 400 °C), and improved solubility in organic solvents. The presence of acyclic or alicyclic oxyethylene sequences as crown ether or podand substructures and an additional amide side group per repeat unit made the polymers essentially amorphous and improved their water absorption ability in comparison with nonsubstituted polyamides. Water uptake values as high as 12% were observed at 65% relative humidity. All the polyamides showed a good film‐forming ability, and the mechanical properties of these films are considered to be satisfactory for experimental aromatic polyamides. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2270–2281, 2006     

Poly(4,4′-dipiperidyl)amides

Polyamides from 4,4′-dipiperidyl, 1,2-ethylene-, and 1,3-propylene- bridged dipiperidyls were prepared via solution and interfacial polycondensation techniques. In sharp contrast to the polyamides from N,N′-alkyl-substituted alkylene diamines and aromatic diacids, the polyamides from 4,4′-dipiperidyls are high-melting (up to 455°C) and alcohol-insoluble. Tough films were cast from formic acid solutions of the polymers; fiber of good physical properties was prepared from a formic acid solution of the polyterephthalamide of 1,2-di(4-piperidyl)ethane.     

POLYMERIZATION OF N,N′-(PYROMELLITOYL)-BIS-L-LEUCINE DIACID CHLORIDE WITH HYDANTOIN DERIVATIVES BY MICROWAVE IRRADIATION

Facile and rapid polycondensation reactions of N,N′-(pyromellitoyl)-bis-L-leucine diacid chloride 1 with eight different derivatives of hydantoin compounds 2a-h were developed by using a domestic microwave oven in the presence ora small amount of polar organic medium such as o-cresol. The polycondensation reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7-10 min, producing a series of novel optically active poly(amide-imide)s 3a-h with high yield and inherent viscosity of 0.35-0.65 dL/g. All of the above polymers were fully characterized by FT-IR, elemental analyses, inherent viscosity (ηiaa), solubility test and specific rotation. Some structural characterization and physical properties of these optically active poly(amide-imide)s are reported.     

Polyamides incorporating phosphine oxide groups. II. Aromatic polymers containing sulfone functionality

Four novel polyamides have been prepared in high yields by the polycondensation reactions of bis(3-carboxyphenyl)- and bis(4-carboxyphenyl)phenylphosphine oxide with 3,3′- and 4,4′-diaminodiphenylsulfone. The thermal properties of these materials were studied using differential scanning calorimetry and thermogravimetric analysis. It was found that the presence of both phosphine oxide and sulfonyl groups within the polymer backbone brought about remarkable modifications in the thermal behavior. Glass transition temperatures 40–50°C lower than those of conventional polyamides i.e., in the range 170–200°C, were recorded. However, we observed greater thermooxidative stability (5% weight loss at >410°C) and high char yield upon prolonged heating at 800°C (20–34%). Also, good solubility in polar aprotic solvents was observed for all polyamides together with some solubility in aqueous solvent mixtures, e.g. tetrahydrofuran/water (95:5). © 1997 John Wiley & Sons, Inc.     

Synthesis,characterization and properties of novel polyamides containing ferrocene unit and flexible spacers

Synthesis and characterization of ferrocene‐containing main‐chain polyamides are reported in this article. A new, interesting type of organometallic monomer (FDADO) based on ferrocene was prepared by interfacial condensation of 1,1′‐dichlorocarbonyl ferrocene with 2 mol 1,8‐diamino‐3,6‐dioxaoctane (DADO). A series of ferrocene‐based polyamides was prepared via polycondensation of the ferrocenyl diamine (FDADO) with different diacid chlorides using two different methods. The monomer and polymers were characterized by elemental analysis, infrared and NMR spectroscopy. The thermal stability and behavior of the synthesized polymers were evaluated by thermal gravimetric analysis (TGA), dynamic mechanical thermal analysis (DMTA), and differential scanning calorimetry (DSC). The crystallinity of polymers was examined by X‐ray diffraction analysis. Inherent viscosity, solubility and flame‐retardancy of the polymers were also studied. The obtained polymers showed good heat‐resistance and flame‐retardancy, and improved solubility vs generally reported polyamides in some common organic solvents. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

磺化聚酰胺的合成及性能

以对苯二酚及对氟苯甲腈为原料, 合成了芳香二羧酸单体1,4-二(4-羧基苯氧基)苯(BCPOB-COOH), 再经磺化反应合成了磺化芳香二羧酸单体1,4-二(4-羧基苯氧基)苯-2-磺酸钠(BCPOBS-Na). 另外, 以芳香二胺单体4,4'-二氨基二苯醚(ODA)为原料, 合成了磺化芳香二胺单体4,4'-二氨基二苯醚-2,2'-二磺酸(ODADS). 以N-甲基-2-吡咯烷酮(NMP)为溶剂、 亚磷酸三苯酯(TPP)与吡啶(Py)为缩合剂, 氯化钙或氯化锂或二者的组合为催化剂, 通过Yamazaki-Higashi直接缩聚, 使芳香二羧酸和芳香二胺中的磺化单体与非磺化单体反应, 制得了两种磺化芳香聚酰胺(Sulfonated polyamide, SPA). 通过红外光谱、 核磁共振波谱及热重分析等手段对聚合物的结构及性能进行了表征与分析, 并研究了聚合物的特性黏度、 溶解性、 成膜性及聚合物薄膜的力学性能等. 结果表明, 通过Yamazaki-Higashi直接缩聚制备的2种磺化芳香聚酰胺在极性非质子性溶剂中具有优良的溶解性能、 较高的耐热性能及优异的力学性能.     

双邻位甲基取代的聚芳醚酮合成与表征

两种单体 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基二苯酮 (o M2 DPOBP)和 2 ,2′ ,6 ,6′ 四甲基 4 ,4′ 二苯氧基三苯二酮 (o M2 DPOTPDK) ,分别与对苯二甲酰氯 (TPC)和间苯二甲酰氯 (IPC)低温亲电溶液缩聚 ,合成了 4种含双邻位甲基侧基聚醚酮醚酮酮 (DM PEKEKK和DM PEKEKMK)及含双邻位甲基侧基聚醚酮酮醚酮酮 (DM PEKKEKK和DM PEKKEKMK)聚合物 .用FT IR、1 H NMR、DSC、TGA、WAXD等方法对聚合物进行了表征 ,研究了聚合物的溶解性能 .结果表明 ,该 4种聚合物具有较高的玻璃化转变温度 ,良好的热稳定性和优良的溶解性能 .     

Synthesis and properties of polyamides of 3,3′-dimethylnaphthidine and its model compounds

A number of polyamides and model amides based on 3,3′-dimethylnaphthidine and various dicarboxylic acids were synthesized in N-methylpyrrolidone containing lithium chloride either by low temperature solution or by direct polycondensation using triphenyl phosphite and pyridine. The polyamides had inherent viscosities of 0.36?5.42 dL g^?1 and were, in general, readily soluble in N-methylpyrrolidone. Amorphous members exhibited relatively high glass transition temperatures in the range of 340–380 and 200–230°C for aromatic and aliphatic polymers, respectively. All polyamides showed good thermal stability in nitrogen and in air.