Studies of radioactivity and heavy metals in phosphate fertilizer

The extraction of mercury(II) from chloride and thiocyanate solutions has been studied by tracer techniques using bis(2-ethylhexyl) sulphoxide (B2EHSO) in benzene as an extractant. These extraction data have been analyzed theoretically by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexation in the organic phase. The results demonstrate that Hg(II) is extracted as HgX₂ and HgX₂·nB2EHSO (where X=Cl^– or SCN^– andn=1 or 2). The effect of the foreign ions on the extraction of Hg(II) has also been investigated.     

Synergic effect of triphenylphosphine oxide (TPPO) on the extraction of Hg(II), Se(IV), Co(II) and Mn(II) with fluorinated pyrazolone (HPMTFP)

Extraction of Hg(II), Se(IV), Mn(II) and Co(II) has been carried out with 1-phenyl-3-methyl-4-trifluoroacetyl-2-pyrazolin-5-one (HPMTFP) and triphenylphosphine oxide (TPPO) into chloroform from pH 1–10. Quantitative extraction of Hg(II), Mn(II) and Co(II) at pH 4 with equimolar 0.05M (PMTFP+TPPO) in chloroform was observed. Se(IV) remains unextracted at this pH range. The stoichiometric composition of the extracted complexes M(PMTFP)₂·nH₂O (M=Mn, Hg), M(PMTFP)₂·2TPPO (M=Mn and Co) and Co(PMTFP)₂·TPPO·H₂O at less than 0.1M TPPO has been established. The formation constantsK _m,0 andK _m,n and stability constants _m,n have been computed. The analytical method developed was applied to the IAEA standard reference material (SRM) potato fluor V-4 for the determination of these elements using NAA technique.     

Homo‐ and heteropolynuclear copper(II) complexes containing a new diimine–dioxime ligand and 1,10‐phenanthroline: synthesis,characterization, solvent‐extraction studies,catalase‐like functions and DNA cleavage abilities

A series of homo‐, heterodinuclear and homotrinuclear copper(II) complexes containing a new Schiff base ligand and 1,10‐phenanthroline were synthesized. Based on results of elemental analyses, FTIR, ¹H‐ and ¹³C‐NMR spectra, conductivity measurements and magnetic susceptibility measurements, the complexes had general compositions {[Cu(L)(H₂O)M(phen)₂](ClO₄)₂ [M = Cu(II), Mn(II), Co(II)]} and {[Cu₃(L)₂(H₂O)₂](ClO₄)₂}. The metal:L:phen ratio is 2:1:2 for the dinuclear copper(II) complexes and the metal:L ratio was 3:2 for the trinuclear copper(II) complex. The liquid–liquid extraction of various transition metal cations [Mn(II), Co(II), Ni(II), Cu(II), Zn(II), Pb(II), Cd(II), Hg(II)] from the aqueous phase to the organic phase was carried out using the diimine–dioxime ligand. It was concluded that the ligand can effectively be used in solvent extraction of copper(II) from the aqueous phase to the organic phase. Furthermore, catalytic activitiy of the complexes for the disproportionation of hydrogen peroxide was also investigated in the presence of imidazole. Dinuclear copper(II)–manganese(II) complex has some similarity to manganese catalase in structure and activity. The interaction between these complexes and DNA has also been investigated by agarose gel electrophoresis; we found that the homo‐ and heterodinuclear copper complexes can cleave supercoiled pBR322 DNA to nicked and linear forms in the presence of H₂O₂. Copyright © 2009 John Wiley & Sons, Ltd.     

Ionic strength effect on the liquid–liquid extraction of zinc(II) and cadmium(II) from sulphate medium by 1-phenyl-3-methyl-4-benzoylpyrazol-5-one in chloroform

The liquid–liquid extraction of zinc(II) and cadmium(II) from sulphate medium by 1-phenyl-3-methyl-4-benzoylpyrazol-5-one (HPMBP) in chloroform is studied. The ionic strength effect of the aqueous phase shows that the extraction of the metal increases with decreasing concentration of sulphate. At initially of about 10^?4?M with three different sulphate concentrations 0.033, 0.16 and 0.33?M in the aqueous phase, Zn(II) and Cd(II) are extracted as the complexes Zn(PMBP)₂ and Cd(PMBP)₂. Sulphate complexes of Zn(II) and Cd(II) are formed in the aqueous phase. The metal–sulphate interaction has been made in evidence by using the Debye–Huckel extended limiting law of ionic activity coefficient.     

The separation of zinc(II) and cadmium(II) by liquid-liquid extraction

The extraction of Zn(II) and Cd(II) from thiocyanate solutions with bis-2-ethylhexyl sulphoxide (B₂EHSO) in benzene as an extractant has been studied by tracer techniques. For comparison, extraction has also been carried out with tributylphosphate (TBP). The extraction data have been analysed by both graphical and theoretical methods by taking into account complexation of the metal in the aqueous phase by inorganic ligands and plausible complexes extracted into the organic phase. The results demonstrate that Zn(II) is extracted as Zn(SCN)₂·2B2EHSO and Zn(SCN)₂·2TBP. In the case of Cd(II), the extracted species are Cd(SCN)₂·4B2EHSO/4TBP. The synergistic extraction of Zn(II) and Cd(II) with mixtures of 1-phenyl-3-methyl-4-benzoyl-pyrazolone-5 (HPMBP) and B2EHSO or TBP or trioctylphosphine oxide (TOPO) from acetate buffer solutions has also been investigated. Zn(II) is extracted as Zn(PMBP)₂·B2EHSO/TBP/TOPO. On the other hand, Cd(II) is found to be not extracted with these mixed-ligand systems under the experimental conditions. These results also demonstrate the mutual separation of Zn(II) and Cd(II) using the synergistic extraction with HPMBP in the presence of various neutral oxodonors.     

Liquid-liquid extraction of copper (II) with dialkyl sulphoxides

The extraction behaviour of Cu(II) from hydrochloric acid and lithium chloride solutions with di-n-pentyl sulphoxide (DPSO) and di-n-octyl sulphoxide (DOSO) has been investigated over a wide range of conditions. At a given strength of the extradant, the extraction increases with increase in HCl and LiCl concentrations. The extraction of the metal also increases with increase in extractant concentration at constant [HCl] or [LiCl]. The species extracted would appear to be CuCl₂·2DPSO/2DOSO and CuCl ₄ ²⁻ ·2DPSO. The extraction of the metal decreases with increase in initial aqueous metal concentration and also with increase in temperature. The extraction also depends on the nature of the diluent employed.     

Extraction—spectrophotometric determination of manganese(II) with xanthates

Manganese(II) (0.04–2 μmol) is extracted into chloroform from an aqueous phase at pH 6.5–9.0, containing a large excess of (n-butyl) xanthate and measured spectrophotometrically at 457 nm. The apparent molar absorptivity is 5.5 × 10³ dm³ mol^-1 cm^-1. The extractability of the manganese complexes decreases in the order n-butyl = benzyl- ? n-propyl- ? ethyl- ? methyl-xanthate. Interfering ions can be removed by a preliminary extraction with ethylxanthate. Ni, Co, Zn, Cd, Pb, Hg(II), Fe(III), As(III), Ce(III), Se(IV), V(V), Mo(VI), and the alkali and alkaline earth metals do not interfere.     

Extraction of scandium(III) by bis(diphenylphosphorylmethylcarbamoyl)alkanes

The extraction of trace amounts of scandium(III) from HCl,HNO₃, and HClO₄ solutions in the form of complexes with neutral polyfunctional organophosphorus compounds bis(diphenylphosphorylmethylcarbamoyl)alkanes [Ph₂P(O)CH₂C(O)NH]₂(CH₂) _n (n = 3, 5, 8) was studied. The effect of the structure of the extractant, the aqueous phase composition, and the nature of the organic solvent on the efficiency of transition of scandium(III) ions into the organic phase was considered, and the stoichiometry of the extracted complexes was determined. The studied ligands exhibit a higher extraction power toward scandium(III) ions than their analog Ph₂P(O)CH₂C(O)NHC₉H₁₉ containing only one bidentate carbamoylmethylphosphoryl moiety per molecule. Scandium(III) passes into the organic phase most efficiently in the presence of HClO4 in the aqueous phase. It was shown that scandium(III) can be selectively recovered and preconcentrated by a complexing adsorbent obtained by noncovalent immobilization of bis(diphenylphosphorylmethylcarbamoyl)pentane on a macroporous polymer matrix.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Preparation of metal Niacin complexes and characterization using spectroscopic and electrochemical techniques

Metal complexes of Niacin (3-pyridin carboxylic acid) were prepared in aqueous medium and characterized by different physico-chemical methods. On the basis of elemental analysis the empirical formula of the complexes have been proposed as [Fe(C₆H₄NO₂)]Cl₂, [Co(C₆H₄NO₂)]Cl, [Zn(C₆H₄NO₂)]Cl, [Cd(C₆H₄NO₂)]Cl and [Hg(C₆H₄NO₂)]Cl. IR spectral data indicate that the metal-ligand bonding occurs through nitrogen atom of aromatic ring and oxygen atom of COO⁻-group. UV-visible spectra show that Fe(III) and Co(II) complexes show d-d electronic transition in addition to π → π*, n → π* and n → σ* transitions. The Fe(II) and Co(II) complexes are paramagnetic. QSTG analysis data strongly support the absence of water molecules in the complexes, and the weight of the residue corresponds to the respective metal oxides. Cyclic voltammetric studies suggest that the redox properties of Zn(II), Cd(II) and Hg(II) in their complexes are modified compared to the uncoordinated metal ion. The CV data also indicate that the charge transfer processes are not reversible.     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Solvent extraction of zinc by 2-hexylpyridine in benzene from aqueous mineral acid — Thiocyanate media

Solvent extraction of Zn(II) by 2-hexylpyridine (HPy) in benzene has been studied from aqueous mineral acid—thiocyanate media. The extraction, though dependent on the acidity of the aqueous phase, is poor from mineral acids (HCl, HNO₃ or H₂SO₄). Addition of 0.02M KSCN to the aqueous phase enhances the distribution ratio by a factor of almost one thousand. The stoichiometry of the extracted complex established by the usual slope analysis method indicates that an ionic type complex, e.g. Zn(SCN)₄·(HPyH)₂, is responsible for extraction. Complexing anions like acetate, oxalate or citrate at 1 M concentration mask the extraction of Zn(II) almost completely. Separation factors determined at optimal conditions (0.1M HPy in benzene −0.05M H₂SO₄+0.2M SCN⁻) indicate that Zn(II), along with Hg(II), can be separated in a single extraction from a number of metals, e.g. Cs(I), Sr(II), Ln(III), Y(III), Cr(III) and (VI). Other metals of interest like Cu(II), Co(II), Fe(III), Mo(VI), U(VI) and Tc(VII) are coextracted but the separation factors are large enough to allow separation in a multistage extraction process.     

Extraction of cobalt (II) and nickel (II) by a solvent impregnated resin containing bis(2,4,4-trimethylpentyl)monothiophosphinic acid

In the present work, studies have been conducted on the equilibrium distribution of cobalt (II) and nickel (II) between aqueous hydrochloric solution and macromolecular resin impregnated with bis(2,4,4-trimethylpentyl)monothiophosphinic acid (Cyanex302, HL). Effects of extraction time, pH values, metal ion concentration, and temperature were investigated. Analysis of the results shows that the extraction of the two metal ions can be explained assuming the formation of metal complexes in the resin phase with a general composition ML ₂. An extraction reaction is proposed and the equilibrium constants of the complexes were determined. The Freundlich isotherm and thermodynamic quantities, i.e., ΔG, ΔH and ΔS were also obtained. Both of the extraction reactions of cobalt (II) and nickel (II) are endothermic ones. The efficiency of the resin in the separation of cobalt (II) and nickel (II) is provided according to the separation factors. Under the experimental conditions employed, pH₅₀ values for cobalt (II) and nickel (II) are 3.76, 5.01, respectively. The logarithmic value of separation factor was calculated as 2.50.     

Extraction of cobalt by the AOT microemulsion system

The extraction of cobalt by Winsor II microemulsion system was studied. In the bis (2-ethylhexyl) sulfosuccinate sodium salt (AOT)/n-pentanol/n-heptane/NaCl system, AOT was used as a anionic surfactant to form microemulsion in n-heptane, n-pentanol was injected in the microemulsion as a cosurfactant. Co(II) was found to be extracted into the microemulsion phase due to ion pair formation such as Co²⁺(R–SO₃ ⁻)Cl. The influence of different parameters such as the volume ratio of aqueous phase to microemulsion, surfactant concentration, pH of the feed solutions, cosurfactant concentration as well as temperature on the extraction yield (E%) were investigated. The results showed that it was possible to extract 95% of cobalt by the AOT Winsor II microemulsion.     

Studies on the liquid-liquid extraction of iron(III) and titanium(IV) with 3-phenyl-4-benzoyl-5-isoxazolone

The extraction behaviour of iron(III) and titanium(IV) from acidic chloride solutions has been investigated using 3-phenyl-4-benzoyl-5-isoxazolone (HPBI) in xylene as an extractant. The results demonstrate that these metal ions are extracted into xylene as Fe(PBI)(3) and TiO(PBI)(2). The equilibrium constants of the extracted complexes have been deduced by non-linear regression analysis by taking into account complexation of metal ion with inorganic ligands in the aqueous phase and all plausible complexes extracted into the organic phase. IR and proton NMR ((1)H NMR) spectra were used to further clarify the nature of complexes extracted into organic phase. The effect of the nature of the diluent on the extraction of iron(III) and titanium(IV) has been studied and correlated with dielectric constants. The extraction behaviour of titanium(IV) has also been compared with that of other metal ions, viz. magnesium(II), vanadium(V), chromium(VI), iron(III), manganese(II), zinc(II) and zirconium(IV), which are associated with the titanium in waste chloride liquors of the titanium-mineral-processing industry.     

New homoleptic metal complexes of Schiff bases derived from 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one

New bidentate Schiff-base ligands 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarbothioamide HL¹ and 2-(2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-ylidene)hydrazinecarboxamide HL² were synthesized from the condensation of 2,4-di-p-tolyl-3-azabicyclo[3.3.1]nonan-9-one with thiosemicarbazide and semicarbazide, respectively. Homoleptic complexes of these ligands, of general formula K[Cr(L ⁿ )₂Cl₂], K₂[Mn(L ⁿ )₂Cl₂], K₂[Fe(L¹)₂Cl₂] and [M(L ⁿ )₂] (where M = Co(II), Ni(II) Cu(II), Zn(II), Cd(II), and Hg(II) ions; n = 1 or 2) are reported. The mode of bonding and overall geometry of the complexes were determined through IR, UV-Vis, NMR and mass spectral studies, magnetic moment measurements, elemental analysis, metal content, and conductance. These studies revealed octahedral geometry for Cr(III), Mn(II), and Fe(II) complexes, square planar for Cu(II), Co(II), and Ni(II) complexes and tetrahedral for Zn(II), Cd(II), and Hg(II) complexes.     

Heavy metal separation with polymer inclusion membranes

Using functionalized calix[4]arene carrier 1 in a PIM system, Hg(II) is transported with high selectivity from acidic aqueous source phase solutions of Cd(II), Hg(II) and Pb(II) with high NaNO₃ concentration into aqueous receiving solutions containing EDTA. To gain insight into this transport selectivity, complexation studies of the three heavy metal perchlorate species by ligand 1 were conducted in acetonitrile. Although 1:1 complexation of the divalent heavy metal cation by 1 was observed for Cd(II), the stoichiometries were more complicated for Hg(II) and Pb(II). Selective Hg(II) transport across the PIM is attributed to both the strength and stoichiometry of the metal ion-carrier species forming at the source phase-membrane interphase and its stripping from the membrane into the receiving phase by EDTA.     

硫、氮双齿配体与Cd(II)和Hg(II)配合物的合成与表征

以HMFC[(反)-肉桂酰基二茂铁缩(S)-甲基二硫代碳酰腙]与HBFC[(反)-肉桂酰基二茂铁缩(S)-苄基二硫代碳酰腙]两种Schiff碱分别与醋酸镉[Cd(OAc)₂•2H₂O]、醋酸汞[Hg(OAc)₂]反应, 合成了6个未见文献报道的配合物Cd(MFC)₂•H₂O, Cd(MFC)•OAc, Cd(BFC)₂, Hg(MFC)₂, Hg(MFC)•OAc, Hg(BFC)₂, 考察了其物理性质, 并利用元素分析、IR, ¹H NMR及摩尔电导表征了其组成、可能结构, 推断了配位过程. 结果表明: 这两种Schiff 碱都是反式双齿配体, 经烯硫醇化并失去质子后, 以负硫离子与过渡金属离子形成共价键, 氮原子与中心金属离子形成配位键.     

Green Synthesis of new Trizole Based Heterocyclic Amino Acids Ligands and their Transition Metal Complexes. Characterization,Kinetics, Antimicrobial and Docking Studies

Two novel amino acids imine ligands (H₂L₁ and H₂L₂) have been synthesized using green condensation reaction from 2‐[3‐Amino‐5‐(2‐hydroxy‐phenyl)‐5‐methyl‐1,5‐dihydro‐[1, 2, 4]triazol‐4‐yl]‐3‐(1H‐indol‐3‐yl)‐propionic acid with benzaldehyde/p‐flouro benzaldehyde (1:1 molar ratio) in the presence of lemon juice as a natural acidic catalyst in aqueous medium. Their transition metal complexes have been prepared in a molar ratio (1:1). Characterization of the ligands and complexes using elemental analysis, spectroscopic studies, ¹HNMR, ¹³CNMR, and thermal analysis has been reported. E*, ΔH*, ΔS* and ΔG* thermodynamic parameters, were calculated to throw more light on the nature of changes accompanying the thermal decomposition process of these complexes. The molar conductance measurement of metal complexes showed nonelectrolyte behavior. The metal complexes of the two ligands have tetrahedral geometry with a general molecular structure [M(H₂L)X_n], where [(M = Mn (II), Co (II), Cu (II) and Zn (II), X = Cl, n = 2]; M = VO (II), X = SO₄, n = 1] for H₂L₁. [M = Co (II), Cu (II), Zn (II)] for H₂L₂. Antibacterial activity of the complexes against (Bacillis subtilis, Micrococcus luteus, Escherichia coli), also antifungal activity against (Aspergillus niger, Candida Glabarta, Saccharomyces cerevisiae) have been screened. The results showed that all complexes have antimicrobial activity higher than free ligands. Molecular docking studies results showed that, all the synthesized compounds having minimum binding energy and have good affinity toward the active pocket, thus, they may be considered as good inhibitor of targeting PDB code: 1SC7 (Human DNA Topo‐isomerase I).