Nanoparticle routes to mesoporous titania thin films

Controlled aging of TiO2 nanoparticles blended with diblock copolymers and processed into dip-coated thin films led to ordered mesostructures with cubic and hexagonal symmetries that can be transformed into mesoporous TiO2 by calcination.     

Formation of highly ordered mesoporous titania films consisting of crystalline nanopillars with inverse mesospace by structural transformation

Highly ordered mesoporous titania films consisting of crystalline nanopillars with open-spaced, perpendicular, and continuous porosity have been prepared via structural transformation from a 3D hexagonal mesostructure during the thermal treatment. The mechanism of the structural transformation is explained by the crystallization of the titania framework and the large contraction of the initial 3D hexagonal mesostructured film upon calcination. This structural transformation provides a new approach to generate mesoporous thin-film materials with unique structures.     

Synthesis and properties of photosensitive polyimide-nanocrystalline titania optical thin films

In this study, synthesis, morphology, and properties of high refractive index photosensitive polyimide-nanocrystalline titania hybrid materials are reported. A soluble polyimide grafted with carboxylic acid or methacrylate groups (P1) was first synthesized from 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), 3,5-diaminobenzoic acid (DABA), 4-aminobenzoic acid (4ABA), and 2-hydroxyethyl methacrylate (2HEMA). The residual carboxylic acid groups could undergo an esterification reaction with titanium butoxide to provide an organic-inorganic bonding. On the other hand, the grafted methacrylate groups rendered photosensitive property for photopatterning. A homogeneous hybrid solution was obtained through the formulation on different mole ratios of titanium butoxide/carboxylic acid, water/acid content in a mixed solvent. It was followed by spin-coating, photocuring and post-baking. The titania domain size in the hybrid materials analyzed by high resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) was around 4-7 nm. The prepared optically transparent films had tunable refractive index (1.583 < n < 2.029), relatively good surface planarity and high thermal stability. A fine pattern with a line width of 50 μm was produced by direct lithographic process on the hybrid films. The present study demonstrates a novel approach for preparing high refractive index hybrid photosensitive materials with patternability.     

Using the effects of pH and moisture to synthesize highly organized mesoporous titania thin films

Highly ordered mesoporous titania films were synthesized within a short time period by controlling the pH of sols and moisture exposure of as-prepared films.     

Manganese oxide thin films prepared by potentiodynamic electrodeposition and their supercapacitor performance

Manganese oxide film for supercapacitor applications was prepared by potentiodynamic electrodeposition in a manganese acetate plating solution. The effects of the potential sweep rate on the oxide microstructure, crystallinity, and chemical states were examined using a scanning electron microscope, an X-ray diffractometer, and an X-ray photoelectron spectrometer, respectively. Electrochemical performance of the film electrodes was evaluated using a cyclic voltammetric measurement. The experimental results indicate that the deposition potential sweep rate significantly affected the material properties of the prepared oxide films. The oxide-specific capacitance increased from 262 to 337 F/g when the sweep rate was increased from 100 to 400 mV/s. The key material factors that govern the specific capacitance and cyclic stability of the oxide electrodes were discussed.     

Tetrazine-functionalized and vertically-aligned mesoporous silica films with electrochemical activity and fluorescence properties

In spite of their attractive physico-chemical properties making them very promising in the field of functional molecular materials, s-tetrazine derivatives remain underexploited in practical devices mainly because their immobilization in a stable form maintaining all their features is still challenging. Here, we show that combining a ‘click chemistry azide/alkyne’ approach with an electrochemically-assisted self-assembly (EASA) method, which is likely to generate azide-functionalized and vertically-aligned mesoporous silica films, and further derivatization of the ordered mesoporous material with propargyl–tetrazine via a soft Huisgen coupling reaction, enable one to reach this goal. The resulting tetrazine-functionalized films formed onto transparent indium–tin oxide (ITO) electrodes exhibit well-defined voltammetric signals, with peak currents proportional to the functionalization level and stable upon multiple potential scanning, as well as effective fluorescence properties as evidenced from fluorescence spectra with maximum emission at 555–560 nm.     

Fabrication and nanoindentation properties of TiN/NiTi thin films and their applications in electrochemical sensing

Nanocrystalline TiN/NiTi thin films have been grown on silicon substrate by dc magnetron sputtering to improve the corrosion and mechanical properties of NiTi based shape memory alloys without sacrificing the phase transformation effect. Interestingly, the preferential orientation of the TiN films was observed to change from (1 1 1) to (2 0 0) with change in nature of sputtering gas from 70% Ar + 30% N₂ to 100% N₂. In present study the influence of crystallographic orientation of TiN on mechanical and corrosion properties of TiN/NiTi thin films was investigated. TiN (2 0 0)/NiTi films were found to exhibit high hardness, high elastic modulus, and thereby better wear resistance as compared to pure NiTi and TiN (1 1 1)/NiTi films. Electrochemical test revealed that TiN coated NiTi film exhibits better corrosion resistance in 1 M NaCl solution as compared to uncoated NiTi film. The application of TiN/NiTi films in the electrochemical sensing of dopamine, which has a critical physiological importance in Parkinson's disease, has been demonstrated. A comparison of voltammetric response of dopamine at silicon based electrodes modified with different nanocrystalline coatings indicated that these films catalyze the oxidation of dopamine.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Spectroscopic and electrochemical properties of thin solid films of yttrium bisphthalocyanine

Langmuir—Blodgett (LB) and evaporated thin solid films of the yytrium bisphthalocyanine complex (YPc₂) have been prepared on various substrates. Cyclic voltammograms of films are discussed and the electrochromic effect on LB films is reported. A detailed spectroscopic characterization of the YPc₂ material is given using resonance Raman scattering (RRS), surface-enhanced resonance Raman scattering (SERRS), transmission and reflection absorption FT-IR spectroscopy and UV—vis spectra. The spectroscopic characterization of the chemical and electrochemical oxidations products of YPc₂ films and solutions was carried out by in situ UV—vis spectroscopy. Potential applications are discussed.     

Visible and near-IR luminescence via energy transfer in rare earth doped mesoporous titania thin films with nanocrystalline walls

Selected photoluminescence in the wavelength range of 600-1540 nm is generated by energy transfer from a light-gathering mesostructured host lattice to an appropriate rare earth ion. The mesoporous titania thin films, which have a well-ordered pore structure and two-phase walls made of amorphous titania and TiO₂ nanocrystallites, were doped with up to 8 mol% lanthanide ions, and the ordered structure of the material was preserved. Exciting the titania in its band gap results in energy transfer and it is possible to observe photoluminescence from the crystal field states of the rare earth ions. This process is successful for certain rare earth ions (Sm³⁺, Eu³⁺, Yb³⁺, Nd³⁺, Er³⁺) and not for others (Tb³⁺, Tm³⁺). A mechanism has been proposed to explain this phenomenon, which involves energy transfer through surface states on titania nanocrystals to matching electronic states on the rare earth ions.     

Photoinduced one-electron reduction of MV2+ in titania nanosheets using porphyrin in mesoporous silica thin films

Composite films of a meso-(tetramethylpyridinium)porphyrin (TMPyP) hybrid incorporated in mesoporous silica (MPS) and cast on a methyl viologen (MV2+)/titania nanosheet hybrid were synthesized and a light-induced charge separation between the two could be observed. These composite thin films were able to initiate a one-electron reduction of the MV2+ ions accompanied by the simultaneous decomposition of the TMPyP organic dye within the mesoporous silica channels.     

Permanent electrochemical promotion of C3H8 oxidation over thin sputtered Pt films

The effect of “permanent electrochemical promotion of catalysis” (P-EPOC) was studied for the first time in the catalytic deep oxidation of C₃H₈ over a thin (～ 150 nm) sputtered Pt film on YSZ, under excess of oxygen at 350 °C. Short positive potential application (+ 1 V) resulted in a 5.6-fold increase of the catalytic rate, where C₃H₈ conversion reached 33%, while the apparent Faradaic efficiency was ～ 330. After positive current interruption the catalytic rate remained in a highly active steady-state, determined by the total charge of the anodic polarization step. Restoration of the catalytic activity to the initial value occurred only by a similar negative potential imposition. This new stable steady-state after current interruption can be interpreted by storage of a non-reactive oxygen species upon anodic polarization at the proximity of the Pt/YSZ interface and subsequent enhanced migration of spillover O^δ? species from the electrolyte support to the Pt/gas interface under open-circuit conditions.     

Synthesis and photocatalytic properties of highly crystalline and ordered mesoporous TiO2 thin films

Highly crystalline and ordered mesoporous TiO2 thin films have been synthesized by stabilization of the mesostructure with confined carbon; the films exhibit 2.5% photoconversion efficiency for the water photolysis at zero-bias and Xe lamp illumination of 40 mW cm(-2).     

Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalitic properties

We demonstrate practical aerosol-assisted approach to synthesize spherical mesoporous titania particles with high surface areas. Scanning electron microscopy observation of the spray-dried products clearly shows spherical morphology. To remove surfactants and enhance crystallinity, the spray-dried products are calcined under various temperatures. The crystalline structures inside the particles are carefully detected by wide-angle XRD measurements. With increase of the calcination temperatures, anatase crystal growth proceeds and transformation from anatase to rutile is occurred. The effect of various calcination temperatures on the mesostructures is also studied by using N₂ adsorption desorption isotherms. The mesoporous titania particles calcined at 350, 400, and 500 °C exhibit type IV isotherms with a capillary condensation step and shows a hysteresis loop, which is a characteristic of mesoporous materials. The reduction in the surface areas and the pore volumes is confirmed by increasing the calcination temperatures, while the average pore diameters are increased gradually. This is attributed to the distortion of the mesostructures due to the grain growth of the anatase phase and the transformation to the rutile phase during the calcination process. As a preliminary experimental photocatalytic activity, oxidative decomposition of acetaldehyde under UV irradiation is examined. The mesoporous titania calcined at 400 °C shows the highest photocatalytic activity, due to both high surface area and well-developed anatase crystalline phase.     

普鲁士蓝膜的电沉积及其电化学阻抗谱

利用循环伏安法在两种不同组成的电解液中进行铂电极上普鲁士蓝膜的电化学沉积，在氯化钾溶液中测量了修饰膜的循环伏安行为，比较了两种膜的电化学阻抗谱。修饰普鲁士蓝膜铂电极的电化学阻抗谱测量结果表明，沉积条件及其沉积膜厚度均对电子传递过程产生影响。     

Photocatalytic properties of titania nanostructured films fabricated from Titania nanosheets

We examined the photochemical properties of well-ordered multilayer films of titania nanosheets prepared on quartz-glass substrate using the layer-by-layer deposition method. The photocatalytic decomposition of gaseous 2-propanol and bleaching of Methylene Blue dye under UV light illumination were measured to evaluate the photocatalytic oxidation ability. Photoinduced hydrophilicity was also studied by measuring the contact angle of water droplets on the film. The results indicated that titania nanosheets had good photoinduced hydrophilicity. The monolayer film of titania nanosheets showed almost identical activity compared with well investigated sol-gel derived anatase TiO(2) film, while its photocatalytic oxidation activity was low by more than an order of magnitude. This fact suggests that photoinduced hydrophilicity could not be explained simply in terms of the photocatalytic removal of hydrophobic organic species adsorbed on the surface. The photocatalytic oxidation activity and the photoinduced hydrophilic conversion rate decreased with increasing number of nanosheet layers, suggesting that photogenerated carriers produced in the internal part of the multilayer films can hardly diffuse to the surface layer. Photochemical properties of ultrathin anatase films obtained simply by heating the titania nanosheet films were evaluated as well, and also revealed high photoinduced hydrophilicity.     

In situ electrodeposition of Pt nanoclusters on glassy carbon surface modified by monolayer choline film and their electrochemical applications

Pt nanoclusters attached to the monolayer choline (Ch) modified glassy carbon surface were successfully synthesized by use of in situ cyclic voltammetry (CV) method. Field emission scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and electrochemical impedance spectroscopy (EIS) were used to characterize the properties of this modified electrode. It was demonstrated that Ch was immobilized onto the carbon surface forming a covalently planted Ch monolayer, which could induce the formation of Pt nanoclusters. The preliminary study found that the homogeneous nanostructured Pt/Ch film exhibited remarkable electrocatalytic activity towards the oxidation of methanol and nitrite.