Extraction with benzene and its derivatives

The extractability of selenium halides with benzene and some of its derivatives has been investigated using a radioactive tracer technique in order to establish the optimum conditions for its extraction. It has been found that Se(IV) is poorly extracted from HCl, HBr or H₂SO₄ solutions but high distribution ratios are observed with binary mixtures of 9M H₂SO₄ and acid halides. The extraction of some other elements is also studied under the conditions selected for Se(IV) extraction and it has been found that only antimony follows Se(IV) in the organic phase. In view of the data obtained, analytical advantages are mentioned and separation procedures are recommended. The extraction mechanism is also discussed and the role of sulfuric acid in the extraction system is explained.     

Solvent extraction of tetravalent selenium

Summary A systematic study has been carried out on the extraction of SeI₄, by various water-immiscible organic solvents. Extraction has been investigated as a function of H₂SO₄ and KI concentrations. It has been found that the Se(IV) extraction is appreciably increased by addition of iodide ion to sulphuric acid solutions. In addition, the presence of water-miscible alcohols and acetone was found to enhance Se(IV) extraction from H₂SO₄-KI solutions. In the light of the obtained results an extraction mechanism is suggested.

---

Untersuchungen zur Extraktion von vierwertigem Selen

Zusammenfassung Es wurde eine systematische Untersuchung zur Extraktion von SeI₄ mittels verschiedener mit Wasser nicht mischbarer organischer Lösungsmittel unternommen. Es wurde die Abhängigkeit der Extraktion von der Konzentration an H₂SO₄ und KI untersucht, wobei sich zeigte, daß die Se(IV)-Extraktion durch Zusatz von Iodid-Ionen zur schwefelsauren Lösung beträchtlich zu steigern ist. Weiters wurde gefunden, daß der Zusatz von wassermischbaren Alkoholen oder Aceton ebenfalls die Extraktion aus H₂SO₄-KI-Lösungen verbessert. Auf Basis dieser Resultate wird ein Extraktionsmechanismus vorgeschlagen.

     

Studies on the extraction behaviour of zirconium from mixed aqueous media with TBP

A systematic study is presented on the extraction of Zr(IV) by tri-n-butylphosphate from H₂SO₄, HNO₃, HCl and HBr solutions as well from binary mixtures of H₂SO₄ and halogen acids. It has been found that Zr(IV) extraction is appreciably increased by addition of halogen acid to sulphuric acid solutions. On the other hand, the presence of water-miscible alcohols and acetone was found to enhance Zr(IV) extraction from HCl and HNO₃ solutions. An investigation of extracted Zr complexes from pure acids and mixed aqueous media enabled an explanation of the observed enhancements. In the light of the obtained results, an extraction mechanism is suggested.     

LIX 84 as an extractant for throium(IV), uranium(VI) and molybdenum(VI)

The extraction order of Th(IV), U(VI) and Mo(VI) based on pH_0.5 values is Mo(VI)>U(VI)>Th(IV). Quantitative extraction has been observed for U(VI) by mixture of 10% (v/v) LIX 84 and 0.1M dibenzoylmethane at pH 4.2 and by mixture of 10% LIX 84 and 0.05M HTTA in the pH range 5.5–7.3 and for Mo(VI) by 10% LIX 84 from chloride media at pH 1.5. The order of extraction of Mo(VI) from 1N acid solutions is HCl>H₂SO₄>HNO₃>HClO₄ and extraction decreases very rapidly with increase in the concentration of HCl as compared to that from H₂SO₄, HNO₃ and HClO₄ acid solutions. The diluents C₆H₆, CCl₄ and CHCl₂ are found to be superior ton-butyl alcohol and isoamyl alcohol for extraction of Mo(VI). Influence of concentration of different anions on the extraction of U(VI) and Mo(VI) has been studied. Very little extraction has been observed in case of Th(IV) by LIX 84 or its mixtures with other chelating extractants or neutral donors.     

Matrix-dependent instability of selenium(IV) stored in teflon containers

Solutions of selenium(IV) standards with different acid matrices were stored in containers constructed of boosilicate glass, conventional polyethylene, and fluorinated ethylenepropylene (teflon FEP). After 50 days of storage in FEP, there were highly significant losses of Se(IV) from standards in either 5% HCl/5% H₂SO₄, or 5% H₂SO₄. Increasing the hydrochloric acid concentration, e.g., 15% HCl/5% H₂SO₄, greatly reduced this loss. Addition of selenium-75 (selenate-free) indicated that the losses did not result from physical adsorption onto container surfaces. It is shown that the losses were caused by oxidation of Se(IV) to Se(VI).     

Studies on extraction of zirconium(IV) by tricapryl methyl ammonium chloride from sulphate media and its separation from hafnium(IV)

The distribution of Zr(IV) between aqueous H₂SO₄ solutions and organic phases of tricapryl methyl ammonium chloride has been described. The dependence of extraction on acidity, metal and solvent concentration, diluent type and temperature was thoroughly investigated. The possible extraction mechanism is discussed in the light of results obtained. A method for the separation of Hf(IV) from Zr(IV) is also suggested.     

Extraction of some elements of the groups IV b and VI b with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) from aqueous mineral acid solutions

Solvent extraction of Cr(VI), Mo(VI), W(VI) and Hf(IV) with 1-phenyl-3-methyl-4-caproyl-pyrazolone-5 (PMCP) in methyl isobutylketone (MIBK), xylene and chloroform (CHCl₃) from mineral acid solutions was studied. Chromium(VI) is not extracted from any of the acids studied (HCl, H₂SO₄ and HClO₄). Molybdenum(VI) is quantitatively extracted by the reagent in xylene and CHCl₃ from HClO₄ and HNO₃ solutions. It is also extracted quantitatively by the reagent in MIBK from HCl, HNO₃ and H₂SO₄ solutions but the participation of the diluent as extractant is considerable. Tungsten(VI) is quantitatively extracted in xylene from 9M HClO₄ solution. MIBK used as diluent also affects its extraction with PMCP. Hafnium(IV) is not extracted from H₂SO₄ solutions while it extracts more than 99% at 3M HNO₃ and above. The extracted species likely are: MoO₂(PMCP)₂, WO₂(PMCP)₂ and Hf(PMCP)₄, respectively.     

Oxidation of Am(III) and stability of Am(IV) and Am(VI) in mineral acid solutions

The oxidation of americium in HNO₃, H₂SO₄ and HClO₄ solutions by a mixture of potassium persulfate with silver salt in the presence of potassium phosphotungstate has been investigated. The influence of acid and its concentration, of (NH₄)₂S₂O₃, K₁₀P₂W₁₇O₆₁ and silver salt on Am(III) oxidation rate, yield and stability of Am(IV) and Am(VI), has been studied. The complexation of Am(III), Am(IV) and Am(VI) with phosphotungstate ions has been investigated. It has been established that Am(III) and Am(IV) form ML₂ complexes and their apparent stability constants have been estimated. The oxidation mechanism is discussed. A method for preparing of Am(IV) in 0.1–6M HNO₃, O.1–3M H₂SO₄, 0.1–1M HClO₄ solutions is proposed. The oxidation of Am(III) to Am(IV) by KBrO₃ and K₂Cr₂O₇ in HNO₃, H₂SO₄, HClO₄ solutions in the presence of K₁₀P₂W₁₇O₆₁ has been investigated.     

Extraction of molybdenum(VI) by 4-(5-nonyl)pyridine in benzene from aqueous mineral acid solutions containing thiocyanate ions

Extraction of Mo(VI) by 4-(5-nonyl)pyridine (NPy) in benzene from mineral acid solutions containing thiocyanate ions has been investigated at room temperature (23±2°C). From mineral acid (HCl, HNO₃, and H₂SO₄) solutions alone Mo(VI) is not extracted quantitatively while the presence of small amounts of KSCN in the system augments the extraction by a large factor. Stoichiometric studies indicate that ion-pair type complexes (NPyH)₂·[MoO₂(SCN)₄] are responsible for the extraction. Separation factors determined at fixed extraction conditions (0.1M Npy/C₆H₆–0.1M acid +0.2M KSCN) reveal that Ag(I), Cu(II), Co(II), Zn(II), Hg(II) and U(VI) are co-extracted while a clean separation from alkali metals, alkaline earths and some transition metals like Ln(III), Zr(IV), Hf(IV), Cr(III), Cr(VI) and Ir(III) is possible. Some of the complexing anions like oxalate, citrate, acetate, thiosulfate or ascorbate do not affect the degree of extraction of Mo(VI) allowing it to be recovered from diverse matrices.     

Kinetics of Ce(IV) oxidation of α-keto acids in sulfuric-perchloric acid media

The rates of oxidation of four α-keto acids, glyoxylic, pyruvic, phenylglyoxylic, and 2-oxobutyric acids by Cerium(IV) in H₂SO₄? HaHSO₄ and H₂SO₄? HClO₄ solutions, have been studied spectrophotometrically. The rate data suggest that CeSO is the most reactive of the Cerium(IV)-sulfate complexes present in the H₂SO₄? NaHSO₄ and H₂SO₄? HClO₄ systems. The oxidation reaction is proposed to be a one-electron process with the rate-determining step being the decomposition of a α-ketoacid-Cerium(IV) complex to a free radical and carbon dioxide through a transition state.     

Plutonium extraction from mixed aqueous media. Plutonium—Uranium separation

A systematic study is presented on Pu IV extraction with tri-n-butyl phosphate and trilaurylamine from binary mixtures of H₂SO₄ with HCl and HBr. The addition of sulfuric acid to the mentioned mineral acid solutions, was found to affect appreciably D_Pu, which recommended some useful purification procedures. The effect of water-miscible alcohols on the extraction of plutonium from HCl and HNO₃ solutions was also investigated.     

Rhenium(VII) extraction with Versatic hydrazides and <Emphasis Type="Italic">N',N'</Emphasis>-Dialkylhydrazides

Rhenium(VII) and molybdenum(VI) extraction with kerosene solutions of α-branched tertiary carboxylic Versatic acids derivatives containing hydrazide C(O)NHNH2 and C(O)NHNCH₃)₂ fragments instead of carboxyl group has been studied. Optimal extraction conditions have been determined depending on H₂SO₄, HCl, and extractant concentrations and composition of extracted complexes has been established. The mechanism of extraction and back extraction of perrhenate ion with ammonia solutions has been suggested.     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Extraction of europium from mixed acids and mixed aqueous—Organic media

The extraction of Eu with Amberlite LA-2, TBP and HDEHP from HF, HCl, HBr, H₂SO₄, CH₃ COOH and KI solutions was investigated. The extraction of Eu with TBP and LA-2 is small over a wide range of concentrations. The extraction of Eu with HDEHP from HCl, HBr, and H₂SO₄ is inversely proportional to the third power of the acid concentration, while the extraction from KI is proportional to the square of the extractant concentration. The extraction by the three extractants from H₂SO₄ in presence of small amounts of hydrogen halides is small. These extraction data can be used to separate Eu from Th and many of the fission products. The presence of water-miscible alcohols and acetone generally increases the extraction of Eu from H₂SO₄ and KI solutions.     

Kinetics and mechanism of bromide ions oxidation by cerium(IV) in sulphuric acid solutions revisited

Kinetics of Br⁻ anion oxidation by cerium(IV) species in aqueous H₂SO₄ solutions have been reexamined. The rate of reaction was determined spectrophotometrically based on a factor analysis of the absorbance – time data collected in the wavelength range 318–390 nm – the region characteristic for the cerium(IV) sulphato complexes. The data fit very well to a pseudo-first order dependence under a large molar excess of the reductant. The rate law of the form –d[Ce^IV]/dt = k[Ce^IV][Br^–]² has been obtained at constant H₂SO₄ concentration and ionic strength I = 2 m. The pseudo-first order rate constant decreases with an [H₂SO₄] increase from 0.1 to ca. 0.4 m range, then increases for higher [H₂SO₄]. The apparent activation parameters have been calculated from the third order rate constants k for different [H₂SO₄].     

Extraction of metals by neutral sulfur-containing extractants: Part I. o-isopropyl-n-ethylthiocarbamate

The formation of neutral mixed complexes of the MX_mS_p type (where M is a metal ion with m⁺ charge, X the inorganic anion, and S the sulfur-containing extractant) allows a selective extraction of various elements. The extraction of many metals from mineral acid solutions or from halide-sulfuric acid mixtures by 0.05 M O-isopropyl-N-ethylthiocarbamate(IPETC) solution in chloroform has been studied. (IPETC) possesses very high selectivity for silver and mercury ions in extractions from HNO₃, H_{2)SO4, HClO4 and HCl solutions. In addition to silver and mercury, Cu, Au, Tl and Se are readily extracted from solutions containing bromide. From iodide solutions, copper, gold and thallium ions may be selectively extracted because silver and mercury cannot be extracted at concentrations of iodide above 0.1 M.(IPETC} extracts metals as mixed complexes, containing the halide and apparently the extractant in the molecular form.     

Formation of extractable species from metal sulfate and amine chlorides

The extraction of Fe, Zn and In by La₂HCl from H₂SO₄ solutions has been studied. The formation of the aqueous complexes H₂Fe(SO₄)₂HSO₄, HZn(SO₄)HSO₄ and HInSO₄(HSO₄)₂ is discussed. The formation of mixed ligand species H₂Fe(SO₄)₂Cl, HZnSO₄Cl and HInSO₄Cl₂ from the interaction of Cl⁺ in aqueous solution or in LA₂HCl before extraction is explained. The reactions in the system to produce the extractable species are discussed. The possible separations are given.     

Evaluation of continuous hydride generation combined with helium and argon microwave induced plasmas using a surfatron for atomic emission spectrometric determination of arsenic,antimony and selenium

The direct coupling of continuous hydride generation with both Ar and He microwave induced plasmas (MIP) sustained in a surfatron has been optimized for the simultaneous determination of arsenic, antimony and selenium with atomic emission spectrometry. While a discharge tube of quartz was found suitable for the Ar plasma, the use of an Al₂O₃ tube led to improved performance of the He plasma. The He MIP was found to be less tolerant to the introduction of hydrogen than the Ar MIP, and correspondingly the hydride generation should be operated at a lower flow rate of 0.5% NaBH₄ solution. The introduction of the H₂O vapour produced during hydride generation into both discharges was found to greatly decrease the sensitivities and to degrade the measurement precision. It could be effectively removed with trapping by concentrated H₂SO₄. The detection limits (3σ) for As, Sb and Se are 1, 0.4 and 1 ng ml⁻¹ with the Ar MIP, and 2, 0.3 and 6 ng ml⁻¹ with the He MIP, respectively. The calibration curves are linear over three decades of concentration. The mutual interferences from As(III), Sb(III), Se(IV), Bi(III) and Sn(IV) were found to be negligible at interferent concentrations below 1 μg ml⁻¹ and in most cases the tolerable interferent concentrations are up to 20 μg ml⁻¹. The proposed method has been applied to the determination of As, Sb and Se in tea samples at μg g⁻¹ levels.     

Extraction of Np(IV) and HNO3 by Triphenylphosphine Oxide

The extraction of Np(IV) and HNO₃ from aqueous solutions containing only this acid (1–10 M) has been studied with solutions of triphenylphosphine oxide (TPPO) in carbon tetrachloride, benzene and chloroform. The species TPPO · HNO₃ and Np(NO₃)₄ · 2TPPO are the most predominently extracted species; there is also experimental evidence for Np(NO₃)₄ · TPPO. An equilibrium “constant” of 0.7 is calculated for the extraction of HNO₃ with solutions of the reagent in CCl₄. This value is found to fit also the measurements on TPPO in C₆H₆. The position of the solvent CHCl₃ is reversed, compared with the extraction of the acid and Np(IV) by the solvents CCl₄ and C₆H₆, respectively.     

Aquation of K2 TcBr6 in dilute acid solutions

The photochemical aquation of K₂ TcBr₆ in 2M HRr, 1M HClO₄ and 1M H₂SO₄ has been studied. The absorption spectra of the various Tc(IV) species were measured after the electrophoretic separation. The spectrophotometric changes and the yield of each species as a function of the UV irradiation time were determined. After 25 hours of irradiation of HBr and HClO₄ solutions the main species were the cationic ones (80%) but in H₂SO₄ solution the neutral species reached a yield of 90%. The oxidation of Tc(IV) species to TcO ₄ ^– proceeded more rapidly and extensively in HClO₄ than in HBr and H₂SO₄.