Synthesis and characterization of organic-inorganic hybrid mesoporous silica materials with new templates

1-Hexadecane-3-methylimidazolium bromide and 1-hexadecane-2,3-dimethylimidazolium bromide were used as new templates for the syntheses of periodic mesoporous organosilica (PMO) materials; using these new templates, ethane-bridged PMO materials were successfully synthesized and characterized under basic conditions.     

Synthesis and lysozyme adsorption of rod-like large-pore periodic mesoporous organosilica

Highly ordered rod-like large-pore periodic mesoporous organosilica (PMO) was successfully synthesized at low acid concentration with the assistance of inorganic salt using triblock copolymer P123 as a template. The roles of inorganic salt and acidity in the production of highly ordered mesostructure and the morphology control of PMOs were investigated. It was found that the inorganic salt can significantly widen the range of the synthesis parameters to produce highly ordered 2D hexagonal pore structure of p6mm symmetry. However, the uniform rod-like PMOs can only be synthesized in a narrow range of acid and salt concentrations, which were sensitive to induction time. The adsorption of lysozyme on PMO was studied at different pH values in comparison with adsorption on pure silica material under controlled morphology and pore structure. It was found that the adsorption capacity of lysozyme on the PMO was lower than that on pure SBA-15 silica material and the adsorption amounts are larger at pH 9.6 than at 7.0 for both materials. The results show that the electrostatic interaction between lysozyme and PMO/SBA-15 surface is more dominant than the hydrophobic forces and the interaction of neighboring lysozyme molecules also plays an important role.     

A general strategy for the rational design of size-selective mesoporous catalysts

A series of functionalized mesoporous silicas with cagelike pore topology has been synthesized and screened for size-selective catalytic transformations. The aluminum-catalyzed Meerwein-Ponndorf-Verley (MPV) reduction of differently sized aromatic aldehydes (benzaldehyde and 1-pyrenecarbox-aldehyde) has been investigated as a test reaction. The catalysts were synthesized in a two-step grafting sequence comprising pore-size engineering of mesoporous silicas (SBA-1, SBA-2, SBA-16) with long-chain alkyl dimethylaminosilanes and surface organoaluminum chemistry with triethylaluminum [{Al(CH(2)CH(3))3}2]. Size-selective reaction behavior was found for small pore SBA-1 materials, and the selectivity could be efficiently tuned by selecting a silylating reagent of appropriate size. The results are compared with the catalytic performance of a large-pore periodic mesoporous organosilica PMO[SBA-1] and the nonporous high-surface-area silicas Aerosil 300/380.     

Synthesis and characterization of chiral benzylic ether-bridged periodic mesoporous organosilicas

The first synthesis of a chiral periodic mesoporous organosilica (PMO) carrying benzylic ether bridging groups is reported. By hydrolysis and condensation of the new designed chiral organosilica precursor 1,4-bis(triethoxysilyl)-2-(1-methoxyethyl)benzene (BTEMEB) in the presence of the non-ionic oligomeric surfactant Brij 76 as supramolecular structure-directing agent under acidic conditions, an ordered mesoporous chiral benzylic ether-bridged hybrid material with a high specific surface area was obtained. The chiral PMO precursor was synthesized in a four-step reaction from 1,4-dibromobenzene as the starting compound. The evidence for the presence of the chiral units in the organosilica precursor as well as inside the PMO material is provided by optical activity measurements.     

In situ infrared study of SBA-15 functionalized with carboxylic groups incorporated by a co-condensation route

Two samples of SBA-15 mesoporous silica with a different content of carboxylic groups (-COOH) were prepared by a co-condensation route, using 4-(triethoxysilil)butyronitrile as the organosilane agent, then treating the samples with sulfuric acid, which removes the template and simultaneously hydrolyses the -CN to -COOH groups, as shown by IR spectroscopy. Both incorporation of organosilane agents and subsequent acid treatment do not affect the ordered SBA-15 structure. The proton-donor ability of carboxylic groups, as well their accessibility to reactants, has been studied in the IR by dosing ammonia, which forms reversibly COO- groups and NH4+ ions. The related equilibrium constants have been determined by elaboration of IR data. Outgassing the samples at progressively increasing temperatures destabilizes to an increasing extent the ammonium/carboxylate ion pair, because of the decrease in surface polarity brought about by dehydration: this decreases the related equilibrium constants. The amount of carboxylic groups undergoing reaction appears instead to be constant with dehydration, and to coincide with the whole population of COOH groups. Titration with alkali solutions yielded surface concentrations for the two samples of ca. 1.0 and 0.45 COOH/nm2. Proportionality between the surface concentrations and the intensities of the C=O IR band is observed: this suggests that COOH groups are noninteracting with each other and allows the computation of the related extinction molar coefficient.     

Periodic Mesoporous Organosilica Materials: Self‐Assembly of Carbamothioic Acid‐Bridged Organosilane Precursors

A new series of carbamothioic acid‐containing periodic mesoporous organosilica (PMO) materials has been synthesized by a direct cocondensation method, in which an organosilica precursor N,S‐bis[3‐(triethoxysilyl)propyl]carbamothioic acid (MI) is treated with tetraethyl orthosilicate (TEOS), and the nonionic surfactant Pluronic 123 (P123) is used as a template under acidic conditions in the presence of inorganic additives. Moreover, the synthesis of the PMO material consisting of the MI precursor without TEOS has been realized. These novel PMO materials have large surface areas, well‐ordered mesoporous structures, hollow fiberlike morphologies, and thick walls. They are also structurally well‐ordered with a high organosilica precursor content, and the carbamothioic acid groups are thermally stable up to 250 °C. Furthermore, the organosilica materials exhibit hydrothermal stability in basic solution.     

Synthesis and characterization of periodic mesoporous organosilicas as anion exchange resins for perrhenate adsorption

A new methodology to immobilize ionic liquids through the use of a bridged silsesquioxane N-(3-triethoxysilylpropyl), N(3)-(3-trimethoxysilylpropyl-4,5-dihydroimidazolium iodide that incorporates an ionic functionality for the assembly of novel periodic mesoporous organosilica (PMO) materials has been developed. The resulting PMO materials were investigated for use as novel anion exchange resins for the separation of perrhenate anions in aqueous solution. As compared with cetyltrimethylammonium chloride, 1-hexadecane-3-methylimidazolium bromide has been demonstrated to be a more efficient surfactant template for the generation of mesopores and surface areas for such PMO materials.     

Preparation and characterization of periodic mesoporous organosilica terminally functionalized with fluorocarbon groups by a direct synthesis

Fluorocarbon groups were used to modify the pore channels of ethane-bridged periodic mesoporous organosilica by the co-condensation of 1,2-Bis(triethoxysilyl)ethane (BTESE) and trifluoropropyltrimethoxysilane (TFPTMS) in the presence of Poly(ethylene glycol)-B-Poly(propylene glycol)-B-Poly(ethylene glycol) (P123) surfactants under acidic conditions. The functionalized materials were investigated in detail by means of XRD, TEM, FT-IR, solid-state NMR, and N₂ adsorption. The effect of fluorocarbon groups concentration on the mesoscopic order and pore structure of the functionalized materials was also studied. The results show that bridging groups in the framework do not cleave and fluorocarbon groups are attached covalently to the pore wall of periodic mesoporous organosilica after functionalization. The samples functionalized with 20% TFPTMS remain desired mesoporous architecture, with a narrow pore size distribution centered at 4.1 nm, a large surface of 834 m²/g and a pore volume of 0.91 cm³g⁻¹, without pronounced change compared to the pure periodic mesoporous organosilica. Unfortunately the functionalized materials become structurally disordered with increasing amount of fluorocarbon groups.     

离子液体功能化有序介孔SBA-15孔壁定域化磷钨酸催化活性中心构建及其催化性能

采用溶胶-凝胶法合成了一种桥键嵌入型双咪唑离子液体功能化介孔硅基材料(Bis-PImBr-PMO-SBA-15),然后离子交换将Keggin型磷钨酸负载于其上,制备了PW-Bis-PImBr-PMO-SBA-15催化剂,并运用X射线衍射、N2吸附-脱附、透射电子显微镜、傅里叶变换红外光谱和热重分析等手段对其进行表征.结果表明,该催化剂具有SBA-15分子筛的有序六方孔道结构,且负载后的磷钨酸阴离子仍保持其完整的Keggin结构.在以水为溶剂,30%H2O2为氧化剂的苯甲醇氧化反应中,该催化剂表现出比均相的或负载于SBA-15表面的Keggin型HPW更高的催化活性,苯甲醇转化率和苯甲醛选择性分别可达95%和94%.离子液体的咪唑阳离子可调节磷钨酸阴离子的氧化-还原性能,从而有利于提高催化剂的催化活性..     

Synthesis,characterization, and catalytic performance of single-site iron(III) centers on the surface of SBA-15 silica

A new molecular precursor strategy has been used to prepare a series of single-site catalysts that possess isolated iron centers supported on mesoporous SBA-15 silica. The iron centers were introduced via grafting reactions of the tris(tert-butoxy)siloxy iron(III) complex Fe[OSi(O(t)Bu)(3)](3)(THF) with SBA-15 in dry hexane. This complex reacts cleanly with the hydroxyl groups of SBA-15 to eliminate HOSi(O(t)Bu)(3) (as monitored by (1)H NMR spectroscopy) with formation of isolated surface species of the type identical with SiO-Fe-[OSi(O(t)Bu)(3)](2)(THF). In this way, up to 21% of the hydroxyl sites on SBA-15 were derivatized (0.23 Fe nm(-)(2)), and iron loadings in the range of 0.0-1.90% were achieved. The structure of the surface-bound iron species, as determined by spectroscopic methods (electron paramagnetic resonance (EPR), nuclear magnetic resonance (NMR), UV-vis, and in situ infrared measurements) and by elemental analyses, contains a pseudotetrahedral iron(III) center. The THF ligand of this surface-bound complex was quantitatively displaced by acetonitrile (by (1)H NMR spectroscopy). Calcination of these materials at 300 degrees C for 2 h under oxygen resulted in removal of all organic matter and site-isolated iron surface species that are stable to condensation to iron oxide clusters. Spectroscopic data (UV-vis and EPR) suggest that the iron centers retain a mononuclear, pseudotetrahedral iron(III) structure after calcination. The calcinated, iron-grafted SBA-15 materials exhibit high selectivities as catalysts for oxidations of alkanes, alkenes, and arenes, with hydrogen peroxide as the oxidant.     

Charge Separation in a Multifunctionalized Framework of Hydrogen‐Bonded Periodic Mesoporous Organosilica

Integration of functional molecular parts into nanoporous materials in a state that allows intermolecular charge or energy transfer is one of the key approaches to the development of photofunctional and electroactive materials. Herein, we report charge separation in a functionalized framework of a periodic mesoporous organosilica (PMO) self‐assembled by hydrogen bonds. Electroactive π‐conjugated organic species with different electron‐donating and electron‐accepting properties were selectively fixed onto the external surface of a nanoparticulate PMO, within the pore wall, and onto the surface of the internal mesopore. UV irradiation of the modified PMO resulted in photoinduced electron transfer and charge separation from the external surface to the pore wall and from the pore wall to the surface of the internal mesopores. These results suggest the high potential of multifunctionalized PMOs in the construction of photocatalytic reaction fields.     

Synthesis of coesite nanocrystals from ethane bridged periodic mesoporous organosilica at low temperature and extreme pressure

Coesite nanocrystals have been synthesized from periodic mesoporous organosilica (PMO) with (CH(2))(2) bridges heated at 300 °C for 150 min and 12 GPa. The crystals are not sintered, single crystalline, and have diameters of ca. 100-300 nm. Below 300 °C, an amorphous non-porous organosilica glass was obtained. Heating above 300 °C at 12 GPa results in the rapid crystal growth and micron size coesite crystals were formed.     

Surfactant-Assisted Ethane-Bridged Silica Coating for Capillary Electrochromatography

With surfactant P123 as structure directing reagent, 1, 2-bis (trimethoxysilyl) ethane was hydrolyzed under acid condition. The resulting ethane-bridged silica was coated onto the inner walls of fused silica capillaries and used as the stationary phase for capillary electrochromatography. The bridged ethyl silica provided hydrophobic groups for reversed-phase separation. A comparative coated capillary was fabricated without the use of surfactant in the preparation of the bonded silica. Separation of model neutral compounds was compared between these two kinds of capillaries. Surfactant-assisted organosilica-coated capillaries displayed much superior retention efficiency without obviously decreased electroosmotic flow. The existence of surfactant in the synthesis of the sol results in higher surface areas of the coating. Such ethane-bridged organosilica stationary phases can be used under basic conditions.     

Mesoporous SBA-15 materials modified with PW or W active species as catalysts for the epoxidation of olefins with H<Subscript>2</Subscript>O<Subscript>2</Subscript>

Five catalysts containing PW or W active species that anchored onto aminosilylated mesoporous silica SBA-15 by a post-grafting route were prepared and the resulting PW or W/APTES/SBA-15 hybrid materials were characterized by XRD, N₂ adsorption/desorption, surface area analysis, TEM, FT-IR, and ICP (inductively coupled plasma atomic emission spectroscopy). The names of these catalysts have been abbreviated as SBA-15m-a, SBA-15m-b, SBA-15m-c, SBA-15m-d, and SBA-15m-e according to the different active species. The PW or W active species were highly dispersed in the channels of the modified mesoporous materials. The interaction between PW or W species and amino groups grafted on the channel surface of SBA-15 led to the immobilization of PW or W species. Their catalytic activity in the epoxidation of cyclooctene with H₂O₂ as oxidant was investigated. Among them, SBA-15m-a showed the best performance, with 98.9% conversion and 98.4% selectivity. The catalyst could be reused for six times with a little decrease in activity.     

Heterogeneous organocatalysis at work: functionalization of hollow periodic mesoporous organosilica spheres with MacMillan catalyst

We report a new method for the synthesis of hollow-structured phenylene-bridged periodic mesoporous organosilica (PMO) spheres with a uniform particle size of 100-200 nm using α-Fe(2)O(3) as a hard template. Based on this method, the hollow-structured phenylene PMO could be easily functionalized with MacMillan catalyst (H-PhPMO-Mac) by a co-condensation process and a "click chemistry" post-modification. The synthesized H-PhPMO-Mac catalyst has been found to exhibit high catalytic activity (98% yield, 81% enantiomeric excess (ee) for endo and 81% ee for exo) in asymmetric Diels-Alder reactions with water as solvent. The catalyst could be reused for at least seven runs without a significant loss of catalytic activity. Our results have also indicated that hollow-structured PMO spheres exhibit higher catalytic efficiency than solid (non-hollow) PMO spheres, and that catalysts prepared by the co-condensation process and "click chemistry" post-modification exhibit higher catalytic efficiency than those prepared by a grafting method.     

Adsorption and wetting characterization of hydrophobic SBA-15 silicas

This work describes adsorption and wetting characterization of hydrophobic ordered mesoporous silicas (OMSs) with the SBA-15 motif. Three synthetic approaches to prepare hydrophobic SBA-15 silicas were explored: grafting with (1) covalently-attached monolayers (CAMs) of C(n)H(2)(n+1)Si(CH(3))(2)N(CH(3))(2), (2) self-assembled monolayers (SAMs) of C(n)H(2)(n+1)Si(OEt)(3), and (3) direct ("one-pot") co-condensation of TEOS with C(n)H(2)(n+1)Si(OEt)(3) in presence of P123 (n=1-18). The materials prepared were characterized by nitrogen adsorption, TEM, and chemical analysis. The surface properties of the materials were assessed by water contact angles (CAs) and by BET C constants. The results showed that, while loadings of the alkyl groups (%C) were comparable, the surface properties and pore ordering of the materials prepared through different methods were quite different. The best quality hydrophobic surfaces were prepared for SBA-15 grafted with CAMs of alkylsilanes. For these materials, the water CAs were above ～120°/100° (adv/rec) and BET C constants were in the range of ～15-25, indicating uniform low-energy surfaces of closely packed alkyl groups on external and internal surfaces of the pores respectively. Moreover, surfaces grafted with the long-chained (C(12)-C(18)) silanes showed super-hydrophobic behavior (CAs～150-180°) and extremely low adhesion for water. The pore uniformity of parental SBA-15 was largely preserved and the pore volume and pore diameter were consistent with the formation of a single layer of alkylsilyl groups inside the pores. Post-synthesis grafting of SBA-15 with SAMs worked not as well as CAMs: the surfaces prepared demonstrated lower water CAs and higher BET C constants, thereby indicating a small amount of accessible polar groups (Si-OH) related to packing constrains for SAMs supported on highly curved surfaces of mesopores. The co-condensation method produced substantially more disordered materials and less hydrophobic surfaces than any of the grafting methods. The surfaces of these materials showed low water CAs and high BET C constants (～100-200) thereby demonstrating a non-uniform surface coverage and presence of unmodified silica. It is concluded that CAMs chemistry is the most efficient approach in preparation of the functionalized OMS materials with uniform surfaces and pores.     

Direct synthesis and catalytic applications of ordered large pore aminopropyl-functionalized SBA-15 mesoporous materials

SBA-15 mesoporous silica has been functionalized with aminopropyl groups through a simple co-condensation approach of tetraethyl orthosilicate (TEOS) and (3-aminopropyl)triethoxysilane (APTES) using amphiphilic block copolymers under acidic conditions. The organic-modified SBA-15 materials have hexagonal crystallographic order, pore diameter up to 60 A, and the content of aminopropyl groups up to 2.3 mmol g(-1). The influences of TEOS prehydrolysis period and APTES concentration on the crystallographic order, pore size, surface area, and pore volume were examined. TEOS prehydrolysis prior to the addition of APTES was found essential to obtain well-ordered mesoporous materials with amino functionality. The amount of APTES incorporated in the silica framework increased with the APTES concentration in the synthesis gel, while the ordering of the mesoporous structure gradually decreased. Analysis with TG, IR, and solid state NMR spectra demonstrated that the aminopropyl groups incorporated in SBA-15 were not decomposed during the preparation procedure and the surfactant P123 was fully removed through ethanol extraction. The modified SBA-15 was an excellent base catalyst in Knoevenagel and Michael addition reactions.     

Synthesis of carboxyl-modified rod-like SBA-15 by rapid co-condensation

Carboxyl-modified SBA-15 rod-like mesoporous materials have been synthesized by a facile rapid co-condensation of tetraethylorthosilicate (TEOS) and 2-cyanoethyltriethoxysilane (CTES), followed by hydrolysis of cyanide groups in sulfuric acid. The concentration of carboxylic groups was varied by changing the silica source ratio of CTES/TEOS from 0.05 to 0.3. X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that the uniform ordered mesoporous structure and rod-like morphology of SBA-15 have been preserved even at the high concentration of carboxylic groups employed. Characterization by Fourier transformed infrared spectroscopy (FTIR), solid-state NMR investigation indicated that carboxylic groups have been successfully grafted onto the surface of SBA-15 through siloxane bonds [(O(3))SiCH(2)CH(2)COOH. The negative charges of the modified SBA-15 materials were enhanced by the presence of the carboxylic groups on the surface. The capacity of lysozyme adsorption of the modified SBA-15 materials were found to be significantly improved as compared with pure silica SBA-15. The maximum amount of lysozyme adsorption on carboxyl-modified was increased with the pH of solution increased from 5.5 to 9.0.     

SBA-15分子筛羟基结构性质及其催化活性的理论研究

采用密度泛函方法对SBA-15分子筛簇模型化合物进行了计算模拟,重点研究了簇模型化合物羟基的几何构型和电子结构性质。从键级、前线分子轨道、静电势和质子化能等方面探讨了表面羟基的酸碱及氧化还原性质。分子筛模型化合物的静电势图显示SBA-15分子筛表面孤立羟基的H原子为分子筛表面的L酸性位,而氢键羟基的O原子则为分子筛表面的B碱性位。分子筛的前线分子轨道研究发现,表面羟基是分子筛表面的氧化还原活性位。计算得到的羟基SiO-H键级及形成的氢键键级分别在0.677 5～0.710 5和0.055 7～0.092 6范围,计算羟基OH的质子化能在1 471～1 589 kJ.mol-1范围。考察分子筛表面的质子化能显示未参与形成氢键的羟基H质子具有较强的B酸性。     

Formation of titanium nitride nanoparticles within mesoporous silica SBA-15

We report the first synthesis of titanium nitride (TiN) nanoparticles inside the nanoscale channels of mesoporous silica SBA-15. The TiN precursor, Ti(NMe(2))(4) in toluene, was incorporated into the methyl group-modified channels of the SBA-15 powder. The functionalization of pore surfaces with methyl groups generates hydrophobic surfaces that facilitate impregnation with Ti(NMe(2))(4) and minimizes reactions between the TiN precursor and the hydroxyl groups on the surface of SBA-15. Formation of TiN nanoparticles inside the mesoporous channels of SBA-15 was carried out by subsequent ammonolysis at high temperatures (700-750 degrees C). The final products have been characterized by TEM and EELS images, powder XRD patterns, FTIR spectra, UV-vis absorption spectra, and nitrogen adsorption isotherm measurements to confirm the presence and distribution of TiN nanoparticles in the SBA-15 samples.