Photocurable pickering emulsion for colloidal particles with structural complexity

We prepared polymeric microparticles with coordinated patches using oil-in-water emulsion droplets which were stabilized by adsorbed colloidal polystyrene (PS) latex particles. The oil phase was photocurable ethoxylated trimethylolpropane triacrylate (ETPTA), and the particle-armored oil droplets were solidified by UV irradiation within a few seconds to produce ETPTA-PS composite microparticles without disturbing the structures. Large armored emulsion drops became raspberry-like particles, while small emulsion drops with a few anchored particles were transformed into colloidal clusters with well-coordinated patches. For high-molecular-weight PS particles with low chemical affinity to the ETPTA monomer, the morphology of the patchy particle was determined by the volume of the emulsion drop and the contact angle of the emulsion interface on the PS particle surface. Meanwhile, for low-molecular-weight PS particles with high affinity, the ETPTA monomers were likely to swell the adsorbed PS particles, and distinctive morphologies were induced during the shrinkage of emulsion drops and the phase separation of ETPTA from the swollen PS particles. In addition, colloidal particles with large open windows were produced by dissolving the PS particles from the patchy particles. We observed photoluminescent emission from the patchy particles in which dye molecules were dispersed in the ETPTA phase. Finally, we used Surface Evolver simulation to predict equilibrium structures of patchy particles and estimate surface energies which are essential to understand the underlying physics.     

Direct surface force measurement in water using a nanosize colloidal probe technique

The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true nano size (<10 nm), surface forces are increasingly important. Nanoparticles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. The current tools for directly measuring interaction forces such as a surface force apparatus or atomic force microscopy (AFM) are limited to particles much larger than nanosize. Here a modified colloidal probe technique is suggested using a multiwalled carbon nanotube (MWNT) to overcome this problem. Determination of zero separation in AFM is critical to extract a reliable force-separation curve when MWNT is used as a probe. Hence, a systematic approach to the data collection for a nanosize colloidal probe is proposed and a sample of a direct surface force measurement curve obtained with the MWNT probe is presented.     

Monte Carlo computer simulations and electron microscopy of colloidal cluster formation via emulsion droplet evaporation

We consider a theoretical model for a binary mixture of colloidal particles and spherical emulsion droplets. The hard sphere colloids interact via additional short-ranged attraction and long-ranged repulsion. The droplet-colloid interaction is an attractive well at the droplet surface, which induces the Pickering effect. The droplet-droplet interaction is a hard-core interaction. The droplets shrink in time, which models the evaporation of the dispersed (oil) phase, and we use Monte Carlo simulations for the dynamics. In the experiments, polystyrene particles were assembled using toluene droplets as templates. The arrangement of the particles on the surface of the droplets was analyzed with cryogenic field emission scanning electron microscopy. Before evaporation of the oil, the particle distribution on the droplet surface was found to be disordered in experiments, and the simulations reproduce this effect. After complete evaporation, ordered colloidal clusters are formed that are stable against thermal fluctuations. Both in the simulations and with field emission scanning electron microscopy, we find stable packings that range from doublets, triplets, and tetrahedra to complex polyhedra of colloids. The simulated cluster structures and size distribution agree well with the experimental results. We also simulate hierarchical assembly in a mixture of tetrahedral clusters and droplets, and find supercluster structures with morphologies that are more complex than those of clusters of single particles.     

Stimuli-responsive surface localized ionic cluster (SLICs) formation from nonspherical colloidal particles

Structural features of phospholipids provide a unique opportunity for utilizing these amphiphilic species to stabilize the synthesis of colloidal dispersion particles by controlling concentration levels relative to dispersion synthesis components. 1,2-Bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DCPC) phospholipid was utilized as cosurfactant in the synthesis of sodium dioctyl sulfosuccinate (SDOSS) stabilized methyl methacrylate/n-butyl acrylate (MMA/nBA) colloidal dispersions. Aqueous dispersions containing various concentration levels of DCPC result in the formation of cocklebur particle morphologies, and when prepared in the presence of Ca2+ and annealed at various temperatures, stimuli-responsive behaviors of coalesced films were elucidated. The formation of surface localized ionic clusters (SLICs) at the film-air (F-A) and film-substrate (F-S) interfaces is shown to be responsive to concentration levels of DCPC, Ca2+/DCPC ratios, and temperature. These studies show that it is possible to control stratification and mobility to the F-A and F-S interfaces during and after coalescence. Using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and internal reflection infrared imaging (IRIRI) spectroscopies, molecular entities responsible for SLIC formation were determined. These studies also show that stimuli-responsive behaviors during film formation can be controlled by colloidal solution morphologies and synergistic interactions of individual components.     

Bilayer-Coating Strategy for Hydrophobic Nanoparticles Providing Colloidal Stability,Functionality, and Surface Protection in Biological Media

The surface chemistry of nanoparticles is a key step on the pathway from particle design towards applications in biologically relevant environments. Here, a bilayer-based strategy for the surface modification of hydrophobic nanoparticles is introduced that leads to excellent colloidal stability in aqueous environments and good protection against disintegration, while permitting surface functionalization via simple carbodiimide chemistry. We have demonstrated the excellent potential of this strategy using upconversion nanoparticles (UCNPs), initially coated with oleate and therefore dispersible only in organic solvents. The hydrophobic oleate capping is maintained and a bilayer is formed upon addition of excess oleate. The bilayer approach renders protection towards luminescence loss by water quenching, while the incorporation of additional molecules containing amino functions yields colloidal stability and facilitates the introduction of functionality. The biological relevance of the approach was confirmed with the use of two model dyes, a photosensitizer and a nitric oxide (NO) probe that, when attached to the surface of the UCNPs, retained their functionality to produce singlet oxygen and detect intracellular NO, respectively. We present a simple and fast strategy to protect and functionalize inorganic nanoparticles in biological media, which is important for controlled surface engineering of nanosized materials for theranostic applications.     

Inorganic nanoparticles prepared in miniemulsion

The defined synthesis of inorganic nanoparticles is the crucial step for their successful application. Thus, preparation methods to control composition, shape, size, and aggregation behavior are of high interest and relevance. Here, the possibilities that the miniemulsion technique offers for the generation of inorganic nanoparticles are reviewed. Several of the traditional synthetic methods as the controlled precipitation or sol–gel chemistry were confined to the droplets of a miniemulsion, leading to new structures and morphologies. Furthermore, the focus is put on polymer- and latex-assisted mineralization and a miniemulsion-based approach to nonconventional colloidal lithography.     

Antibonding plasmon modes in colloidal gold nanorod clusters

The optical response of nanoplasmonic colloids in disperse phase is strictly related to their shape. However, upon self-assembly, new optical features, for example, bonding or antibonding modes, emerge as a result of the mutual orientations of nanoparticles. The geometry of the final assemblies often determines which mode is dominating in the overall optical response. These new plasmon modes, however, are mostly observed in silico, as self-assembly in the liquid phase leads to cluster formation with a broad range of particle units. Here we show that low-symmetry clustering of gold nanorods (AuNRs) in solution can also reveal antibonding modes. We found that UV-light irradiation of colloidal dispersions of AuNRs in N-methyl-2-pyrrolidone (NMP), stabilized by poly(vinylpyrrolidone) (PVP) results in the creation of AuNRs clusters with ladderlike morphology, where antibonding modes can be identified. We propose that UV irradiation induces formation of radicals in solvent molecules, which then promote cross-linking of PVP chains on the surface of adjacent particles. This picture opens up a number of relevant questions in nanoscience and is expected to find application in light induced self-assembly of particles with various compositions and morphologies.     

Template-assisted self-assembly: a practical route to complex aggregates of monodispersed colloids with well-defined sizes, shapes, and structures

This paper describes a strategy that combines physical templating and capillary forces to assemble monodispersed spherical colloids into uniform aggregates with well-controlled sizes, shapes, and structures. When an aqueous dispersion of colloidal particles was allowed to dewet from a solid surface that had been patterned with appropriate relief structures, the particles were trapped by the recessed regions and assembled into aggregates whose structures were determined by the geometric confinement provided by the templates. We have demonstrated the capability and feasibility of this approach by assembling polystyrene beads and silica colloids (> or =150 nm in diameter) into complex aggregates that include polygonal or polyhedral clusters, linear or zigzag chains, and circular rings. We have also been able to generate hybrid aggregates in the shape of HF or H2O molecules that are composed of polymer beads having different diameters, polymer beads labeled with different organic dyes, and a combination of polymeric and inorganic beads. These colloidal aggregates can serve as a useful model system to investigate the hydrodynamic and optical scattering properties of colloidal particles having nonspherical morphologies. They should also find use as the building blocks to generate hierarchically self-assembled systems that may exhibit interesting properties highly valuable to areas ranging from photonics to condensed matter physics.     

Aqueous microgels for the growth of hydroxyapatite nanocrystals

In present article, we demonstrate that aqueous microgels can be used as containers for the in-situ synthesis of hydroxyapatite. The hydroxyapatite nanocrystals (HAp NCs) become integrated into microgels forming hybrid colloids. The HAp NCs loaded in the microgel can be varied over a broad range. The HAp NCs are localized within the microgel corona. The deposition of the inorganic nanocrystals decreases the colloidal stability of the microgels and leads to particle aggregation at high HAp NCs loading. Because of the strong interactions between HAp NCs and polymer chains, the swelling degree of microgels decreases, and temperature-sensitive properties disappear at high loading of the inorganic component. We demonstrate that hybrid colloids can be used as building blocks for the preparation of nanostructured films on solid substrates.     

Stabilization of oil-in-water emulsions by colloidal particles modified with short amphiphiles

Emulsions stabilized through the adsorption of colloidal particles at the liquid-liquid interface have long been used and investigated in a number of different applications. The interfacial adsorption of particles can be induced by adjusting the particle wetting behavior in the liquid media. Here, we report a new approach to prepare stable oil-in-water emulsions by tailoring the wetting behavior of colloidal particles in water using short amphiphilic molecules. We illustrate the method using hydrophilic metal oxide particles initially dispersed in the aqueous phase. The wettability of such particles in water is reduced by an in situ surface hydrophobization that induces particle adsorption at oil-water interfaces. We evaluate the conditions required for particle adsorption at the liquid-liquid interface and discuss the effect of the emulsion initial composition on the final microstructure of oil-water mixtures containing high concentrations of alumina particles modified with short carboxylic acids. This new approach for emulsion preparation can be easily applied to a variety of other metal oxide particles.     

Preparation of doublet, triangular, and tetrahedral colloidal clusters by controlled emulsification

We describe a six-step method for making colloidal clusters of 2, 3, or 4 silica particles with a radius of 1.2 microm. This method, originally described by Manoharan et al. (Manoharan, V. N.; Elsesser, M. T.; Pine, D. J. Science 2003, 301, 483), is based on the encapsulation of silica spheres in emulsion droplets. The originality of our work lies in the preparation of monodisperse emulsions, which allows us to obtain some high yields of small aggregates over a wide range of conditions. Using optical microscopy and disk centrifugation, we show that the relative fractions of 2, 3, and 4 particle aggregates are controlled by the emulsification conditions, particularly the concentration of silica in the dispersed phase. Our best yields are obtained using low to moderate shear rates, a highly viscous continuous phase, and intermediate amounts of silica. The sedimentation of the colloidal solution into a gradient of concentration leads to aqueous suspensions of identical clusters. Since the overall process can easily be scaled up, large quantities of identical clusters may be prepared, which should allow the thermodynamic properties of these new colloidal objects to be measured for the first time. These nonspherical particles could serve as building blocks for more complex assemblies, such as colloidal crystals which could find applications as photonic materials.     

Crystallization on surfaces of well-defined topography

Single crystals of calcite with regular patterned surfaces comprising close-packed arrays of hemispherical cavities or domes were produced by crystallization on colloidal monolayers or PDMS replicas of these monolayers, respectively. Perfect replication of the substrate topography was achieved for all colloidal particles, irrespective of their size and surface chemistry when the substrate geometry permitted unrestricted ion flow to the growing crystal. This work demonstrates that crystallization within a mould provides a very general route to producing single crystals with curved surfaces and unusual morphologies and that such patterning can be applied from the micro- to the nanoscale.     

磺化聚苯乙烯有序孔水凝胶的制备及其模板效应

有序大孔聚苯乙烯材料通过胶体晶模板技术合成, 再经过磺化处理制备得到有序大孔水凝胶体系. 研究了其化学组成和形态. 以溶胶/凝胶制备有序无机材料如二氧化钛对凝胶进行复型, 证明了有序大孔凝胶的形态特征, 同时显示了有序大孔水凝胶作为新型模板制备形态可控的介观尺度有序无机材料的潜力.     

Electric double layer for spherical particles in salt-free concentrated suspensions including ion size effects

The equilibrium electric double layer (EDL) that surrounds colloidal particles is essential for the response of a suspension under a variety of static or alternating external fields. An ideal salt-free suspension is composed of charged colloidal particles and ionic countercharges released by the charging mechanism. Existing macroscopic theoretical models can be improved by incorporating different ionic effects usually neglected in previous mean-field approaches, which are based on the Poisson-Boltzmann equation (PB). The influence of the finite size of the ions seems to be quite promising because it has been shown to predict phenomena like charge reversal, which has been out of the scope of classical PB approximations. In this work we numerically obtain the surface electric potential and the counterion concentration profiles around a charged particle in a concentrated salt-free suspension corrected by the finite size of the counterions. The results show the high importance of such corrections for moderate to high particle charges at every particle volume fraction, especially when a region of closest approach of the counterions to the particle surface is considered. We conclude that finite ion size considerations are obeyed for the development of new theoretical models to study non-equilibrium properties in concentrated colloidal suspensions, particularly salt-free ones with small and highly charged particles.     

Template-directed control of crystal morphologies

Biominerals are characterised by unique morphologies, and it is a long-term synthetic goal to reproduce these synthetically. We here apply a range of templating routes to investigate whether a fascinating category of biominerals, the single crystals with complex forms, can be produced using simple synthetic methods. Macroporous crystals with sponge-like morphologies identical to that of sea urchin skeletal plates were produced on templating with a sponge-like polymer membrane. Similarly, patterning of individual crystal faces was achieved from the micrometer to nanometer scale through crystallisation on colloidal particle monolayers and patterned polymer thin films. These experiments demonstrate the versatility of a templating approach to producing single crystals with unique morphologies.     

Surface and Interface Chemistry in Colloidal Quantum Dots for Solar Applications Studied by X‐Ray Photoelectron Spectroscopy

Control of the surface and interface chemistry of colloidal quantum dots (CQDs) is critical to achieving a product with good air stability and high performing optoelectronic devices. Through various surface passivation treatments, vast improvements have been made in fields such as CQD photovoltaics; however devices have not currently reached commercial standards. We show how X‐ray photoelectron spectroscopy (XPS) can provide a better understanding of exactly how surface treatments act on CQD surfaces, and the effect of surface composition on air stability and device performance.. We illustrate this with PbS‐based CQDs, using XPS to measure oxidation processes, and to quantify the composition of the topmost surface layer after different surface treatments. We also demonstrate the use of synchrotron radiation‐excited depth‐profiling XPS, a powerful technique for determining the surface composition, chemistry and structure of CQDs. This review describes our recent progress in characterization of CQD surfaces using SR‐excited depth profiling XPS and other photoemission techniques.     

Particle self-assembly at ionic liquid-based interfaces

This review presents an overview of the nature of ionic liquid (IL)-based interfaces and self-assembled particle morphologies of IL-in-water, oil- and water-in-IL, and novel IL-in-IL Pickering emulsions with emphasis on their unique phenomena, by means of experimental and computational studies. In IL-in-water Pickering emulsions, particles formed monolayers at ionic liquid–water interfaces and were close-packed on fully covered emulsion droplets or aggregated on partially covered droplets. Interestingly, other than equilibrating at the ionic liquid–water interfaces, microparticles with certain surface chemistries were extracted into the ionic liquid phase with a high efficiency. These experimental findings were supported by potential of mean force calculations, which showed large energy drops as hydrophobic particles crossed the interface into the IL phase. In the oil- and water-in-IL Pickering emulsions, microparticles with acidic surface chemistries formed monolayer bridges between the internal phase droplets rather than residing at the oil/water–ionic liquid interfaces, a significant deviation from traditional Pickering emulsion morphology. Molecular dynamics simulations revealed aspects of the mechanism behind this bridging phenomenon, including the role of the droplet phase, surface chemistry, and inter-particle film. Novel IL-in-IL Pickering emulsions exhibited an array of self-assembled morphologies including the previously observed particle absorption and bridging phenomena. The appearance of these morphologies depended on the particle surface chemistry as well as the ILs used. The incorporation of particle self-assembly with ionic liquid science allows for new applications at the intersection of these two fields, and have the potential to be numerous due to the tunability of the ionic liquids and particles incorporated, as well as the particle morphology by combining certain groups of particle surface chemistry, IL type (protic or aprotic), and whether oil or water is incorporated.     

Polyelectrolyte-templated synthesis of bimetallic nanoparticles

Bimetallic nanoparticles (NPs) are known to exhibit enhanced optical and catalytic properties that can be optimized by tailoring NP composition, size, and morphology. Galvanic deposition of a second metal onto a primary metal NP template is a versatile method for fabricating bimetallic NPs using a scalable, solution-based synthesis. We demonstrate that the galvanic displacement reaction pathway can be controlled through appropriate surface modification of the NP template. To synthesize bimetallic Au-Ag NPs, we used colloidal Ag NPs modified by layer-by-layer (LBL) assembled polyelectrolyte layers to template the reduction of HAuCl(4). NPs terminated with positively and negatively charged polyelectrolytes yield highly contrasting morphologies and Au surface concentrations. We propose that these charged surface layers control galvanic charge transfer by controlling nucleation and diffusion at the deposition front. This surface-directed synthetic strategy can be advantageously used to tailor both overall NP morphology and Au surface concentrations.     

From colloidal Co/CoO core/shell nanoparticles to arrays of metallic nanomagnets: surface modification and magnetic properties.

The magnetic properties of nanoparticles can be subject to strong variations as the chemical composition of the particle surface is modified. To study this interrelation of surface chemistry and magnetism, self-assembled layers of colloidal 9.5 nm Co/CoO core/shell nanoparticles were exposed to mild reactive hydrogen and oxygen plasmas. The consecutive oxygen/hydrogen plasma treatment transforms the particle layer into an array of metallic nanomagnets with complete reduction of the oxide and removal of the organic surfactants. The original arrangement of the particle array and the number of Co atoms per particle remains unchanged within the experimental error, and thus this is a possible route for the fabrication of ultrahigh-density magnetic bit structures from colloidal dispersions. The magnetic properties can be tuned by controlling the thickness of the surface oxide layer, which magnetically hardens the particles, as evidenced by element-specific magnetic hysteresis loops.