Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Construction and deconstruction of multilayer films containing polycarboxybetaine: effect of pH and ionic strength

The influences of pH and NaCl concentration of dipping solutions and the pH and NaCl concentration of disintegration solutions on the disintegration behaviors of poly(4-vinylpyridiniomethanecarboxylate) (PVPMC)/poly(sodium 4-styrenesulfonate) (PSS) (PVPMC/PSS) multilayer films were investigated by ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FT-IR), quartz crystal microbalance (QCM) and atomic force microscopy (AFM). It was found that the disintegration rates and degrees of PVPMC/PSS multilayer films in neutral water could be well controlled by changing pH of dipping solutions and immersion time during the disintegration process. Furthermore, PVPMC/PSS multilayer films could be disintegrated completely and rapidly in pH 8 alkali solution or physiological condition (i.e., 0.15 M NaCl solution). The controllable disintegration of PVPMC/PSS multilayer films was then utilized to fabricate PEC/PSS free-standing multilayer films, in which PEC was a positively charged polyelectrolyte complex made from excessive poly(diallyldimethylammonium) (PDDA) and PSS. The experimental results indicated that the disintegration rates of PVPMC/PSS sacrificial sublayer strongly affected the integrity of the resultant PEC/PSS free-standing multilayer films. Only free-floating PEC/PSS was released from neutral water by disintegrating PVPMC/PSS multilayer sublayers. However, large size flat and tube-like PEC/PSS free-standing multilayer films with good mechanical properties were obtained facilely from pH 8 alkali solution and 0.15 M NaCl solution, respectively. The preparation of such free-standing films at physiological condition may be useful in the biological or medical application.     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.     

磷钼钒杂多酸/聚酰胺-胺复合膜修饰电极的制备及电催化性能

通过静电层层自组装方法在预修饰聚二烯丙基二甲基氯化铵的电极基片上制备了Dawson型磷钼钒杂多酸/聚酰胺-胺多层复合膜. 用X射线光电子能谱、紫外-可见光谱、循环伏安法和原子力显微镜分析表征了多层复合膜的形成过程; 用循环伏安法表征了该复合膜修饰电极的电化学性能, 研究结果表明, 该复合膜修饰的电极稳定性好, 对亚硝酸盐、溴酸盐的还原以及抗坏血酸的氧化具有良好的催化活性.     

Multilayer film assembled from charged derivatives of chitosan: physical characteristics and biological responses

Polyelectrolyte multilayer films were successfully assembled from each of the three charged derivatives of chitosan; N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC), N-succinyl chitosan (SCC) and N-sulfofurfuryl chitosan (SFC), paired with one of the two oppositely charged polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on surface-treated poly(ethylene terephthalate) (treated PET) substrates by alternate layer-by-layer adsorption. Surface coverage and wettability of the multilayer films were determined by AFM and water contact angle measurements, respectively. Analysis by quartz crystal balance with dissipation (QCM-D) has suggested that all multilayer films are relatively rigid and have a high water content associated within their structures, accounting for up to 85-90% (w/w) for films having 7-10 layers. In vitro cytocompatibility tests for the fibroblast-like L929 cell line revealed a slight dependency for cell adhesion and proliferation on the outermost layer. The multilayer film containing HTACC exhibited moderate antibacterial activity against E. coli and S. aureus. Bearing negative charges, the multilayer films terminating with SFC and having at least 10 layers were capable of suppressing the adsorption of plasma proteins and platelet adhesion at a comparable level to the multilayer film assembled from heparin, a well-known antithrombogenic polymer.     

Cell adhesion properties of patterned poly(acrylic acid)/poly(allylamine hydrochloride) multilayer films created by room-temperature imprinting technique

Patterned poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) multilayer films with line structures of different lateral size and vertical height were fabricated by a room-temperature imprinting technique, and their cell adhesion properties were investigated. The nonimprinted PAA/PAH multilayer films are cytophilic toward NIH/3T3 fibroblasts and HeLa cells whether PAA or PAH is the outer most layer. In contrast, the PAA/PAH multilayer films with a 6.5-microm-line/3.5-microm-space pattern structure are cytophobic toward NIH/3T3 fibroblasts and HeLa cells when the height of the lines is 1.29 microm. By either increasing the lateral size of the patters to 69-microm-line/43-mum-space or decreasing the height of the imprinted lines to approximately 107 nm, imprinted PAA/PAH multilayer films become cytophilic. This kind of transition of cell adhesion behavior derives from the change of the physical pattern size of the PAA/PAH multilayer films and is independent of the chemical composition of the films. The easy patterning of layer-by-layer assembled polymeric multilayer films with the room-temperature imprinting technique provides a facile way to tailor the cellular behavior of the layered polymeric films by simply changing the pattern dimensions.     

Silver nanocomposite layer-by-layer films based on assembled polyelectrolyte/dendrimer

Silver nanocomposite multilayer films were prepared through the in situ method. Multilayer thin films, prepared through the sequential electrostatic deposition of a positively charged third-generation poly(amidoamine) dendrimer (PAMAM) and negatively charged poly(styrenesulfonate) (PSS) and poly(acrylic acid) (PAA), were utilized as nanoreactors for the formation of silver nanoparticles. The silver ions were preorganized in layer-by-layer (LBL) films composed of PAMAM dendrimers and subsequently reduced with hydrogen to prepare the silver nanoparticles. The UV-vis spectrum and profilometer were used to characterize the regular growth of bilayers. UV-vis absorption from plasmon resonance at 435 nm and TEM images indicated the formation of the silver nanoparticles in the multilayer films. The silver nanocomposite LBL films were also constructed on the indium tin oxide-glass and investigated using cyclic voltammetry. The silver nanoparticles in the multilayer films have a stronger negative redox potential. The silver nanocomposite LBL films may have a potential application in the catalysis of reduction of 4-nitrophenol with sodium borohydride.     

Control of composition in the multilayer films fabricated from mixed solutions containing two dendrimers

A series of multilayer films were fabricated alternately from poly(4-vinylpyridine) solution and mixed solutions of two carboxyl-terminated dendrimers. UV-Vis absorption spectroscopy was applied to study the composition of the multilayer films. In contrast to mixed solutions of linear polymers, the total amount of dendrimers in multilayer film is independent of the ratio of dendrimers in mixed solution, which is possibly due to the globular conformation of the dendrimer. Furthermore, the ratio of two dendrimers in films is linearly dependent on the ratio of the two dendrimers in solutions, which facilitates control of the composition in multilayer films.     

Modulation of hemocompatibility of polysulfone by polyelectrolyte multilayer films

Polyelectrolyte multilayer (PEM) films have been recently applied to surface modification of biomaterials. Cellular interactions with PEM films consisted of weak polyelectrolytes are greatly affected by the conditions of polyelectrolyte deposition, such as pH of polyelectrolyte solution. Previous studies indicated that the adhesion of several types of mammalian cells to PAH/PAA multilayer films was hindered by low pH and high layer numbers. The objective of this study is to evaluate whether the hemocompatibility of polysulfone can be modulated by deposition of poly(allylamine hydrochloride) (PAH)/poly(acrylic acid) (PAA) multilayer films. PAH/PAA multilayer films with different layer numbers were assembled onto polysulfone at either pH 2.0 or pH 6.5. The number of platelet adhesion and the morphology of adherent platelets were determined to evaluate hemocompatibility of modified substrates. Compared to non-treat polysulfone, the PEM films developed at pH 2.0 decreased platelet adhesion, while those built at pH 6.5 enhanced platelet deposition. Platelet adhesion was found positively correlated to polyclonal antibodies binding to surface-bound fibrinogen. The extent of platelet spreading was increased with layer numbers of PEM films, suggesting that the adherent platelets on thick PEM films were prone to activation. In conclusion, PAH/PAA films with few layers developed at pH 2.0 possessed better hemocompatibility compared to other substrates.     

Mussel-inspired chemistry for robust and surface-modifiable multilayer films

In this article, we report a bioinspired approach to preparing stable, functional multilayer films by the integration of mussel-inspired catechol oxidative chemistry into a layer-by-layer (LbL) assembly. A polyanion of poly(acrylic acid-g-dopamine) (PAA-dopamine) bearing catechol groups, a mussel adhesive protein-mimetic polymer, was synthesized as the building block for LbL assembly with poly(allylamine hydrochloride) (PAH). The oxidization of the incorporated catechol group under mild oxidative condition yields o-quinone, which exhibits high reactivity with amine and catechol, thus endowing the chemical covalence and retaining the assembled morphology of multilayer films. The cross-linked films showed excellent stability even in extremely acidic, basic, and highly concentrated aqueous salt solutions. The efficient chemical cross-linking allows for the production of intact free-standing films without using a sacrificial layer. Moreover, thiol-modified multilayer films with good stability were exploited by a combination of thiols-catechol addition and then oxidative cross-linking. The outstanding stability under harsh conditions and the facile functionalization of the PAA-dopamine/PAH multilayer films make them attractive for barriers, separation, and biomedical devices.     

[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

钒取代Keggin型杂多酸的多层组装和电催化性能研究

用层层组装的方法在4-氨基苯甲酸预修饰的玻碳电极上交替沉积过渡金属钒取代的杂多酸H₃PW₆V₆O₆-40(简称PW₆V₆)和联吡啶锇取代的聚乙烯吡啶(QPVP-Os).用表面等离子体共振(SPR)技术和循环伏安(CV)法对多层膜进行了表征.结果表明,多层膜的生长均匀,平均厚度为2.88nm.还研究了多层膜对亚硝酸根(NO₂^-)和溴酸根(BrO₃^-)的催化还原活性.     

Layer-by-layer assembled microgel films with high loading capacity: reversible loading and release of dyes and nanoparticles

Multilayer films containing microgels of chemically cross-linked poly(allylamine hydrochloride) (PAH) and dextran (named PAH-D) were fabricated by layer-by-layer deposition of PAH-D and poly(styrene sulfonate) (PSS). The successful fabrication of PAH-D/PSS multilayer films was verified by quartz crystal microbalance measurements and cross-sectional scanning electron microscopy. The as-prepared PAH-D/PSS multilayer films can reversibly load and release negatively charged dyes such as methyl orange (MO) and fluorescein sodium and mercaptoacetic acid-stabilized CdTe nanoparticles. The loading capacity of the film for MO can be as large as approximately 3.0 microg/cm2 per bilayer, which corresponds to a MO density of 0.75 g/cm3 in the film. The high loading capacity of the PAH-D/PSS films originates from the cross-linked film structure with sufficient binding groups of protonated amine groups, as well as their high swelling capability by solvent. The loaded material can be released slowly when immersing the films in 0.9% normal saline. Meanwhile, the PAH-D/PSS multilayer films could deposit directly on either hydrophilic or hydrophobic substrates such as quartz, polytetrafluoroethylene, polystyrene, poly(ethylene terephthalate), and polypropylene. The microgel films of PAH-D/PSS are expected to be widely useful as matrixes for loading functional guest materials and even for controlled release.     

碳纳米管修饰电极同时测定邻苯二酚和对苯二酚

用十二烷基磺酸钠(SDS)分散碳纳米管(CNTs),通过层层组装(LBL)聚二甲基二烯丙基氯化铵(PDDA)和CNTs构筑PDDA/CNTs多层膜电极.利用紫外-可见光谱法对PDDA/CNTs多层膜的组装过程进行监测,用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了邻苯二酚和对苯二酚同时存在时PDDA/CNTs多层膜电极上的电化学行为.结果表明,碳纳米管修饰电极对邻苯二酚和对苯二酚有较好的电催化活性和电分离作用,邻苯二酚和对苯二酚无需经过分离即可同时被检出.在修饰电极上的线性范围如下:邻苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9991;对苯二酚为2.0×10-6~1.4×10-4mol/L,线性相关系数R=0.9987.     

Layer-by-layer assembled thin films composed of carboxyl-terminated poly(amidoamine) dendrimer as a pH-sensitive nano-device

Dendrimer-containing multilayer thin films have successfully been prepared by a layer-by-layer deposition of carboxyl-terminated poly(amidoamine) dendrimer (PAMAM–COOH) and poly(methacrylic acid) (PMA) on a solid surface at pH 4.0, while the multilayer film did not form at pH 7.0. The PMA/PAMAM–COOH multilayer films prepared at pH 4.0 are decomposed at neutral pH due to electrostatic repulsion between negatively-charged carboxylate residues. The results suggest that the primary force for the successful deposition of PAMAM–COOH and PMA at pH 4.0 is hydrogen bonding between COOH residues on the surface of the dendrimer and PMA. The multilayer films are decomposed also at strongly acidic pH, suggesting an electrostatic force of attraction between the protonated tertiary amino groups in PAMAM–COOH and a small fraction of COO⁻ residues in PMA contributes in part to the multilayer formation at pH 4.0. The PMA/PAMAM–COOH thin films can accommodate model dyes, Rose Bengal and 5,10,15,20-tetraphenyl-21H,23H-porphinetetrasulfonate, and the release can be controlled by changing pH.     

Immobilization of enamel matrix derivate protein onto polypeptide multilayers. Comparative in situ measurements using ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry

The buildup of biodegradable poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on silica and titanium surfaces and the immobilization of enamel matrix derivate (EMD) protein was followed by utilizing in situ ellipsometry, quartz crystal microbalance with dissipation, and dual-polarization interferometry (DPI). The use of the relatively new DPI technique validated earlier published ellipsometry measurements of the PLL-PGA polypeptide films. The hydrophobic aggregating EMD protein was successfully immobilized both on top of and within the multilayer structures at pH 5.0. DPI measurements further indicated that the immobilization of EMD is influenced by the flow pattern during adsorption. The formed polypeptide-EMD multilayer films are of interest since it is known that EMD is able to trigger cell response and induce biomineralization. The multilayer films thus have potential to be useful as bioactive and biodegradable coatings for future dental implants.     

Fabrication of polyelectrolyte multilayer films comprising nanoblended layers

Polyelectrolyte multilayer thin films were prepared via the alternate deposition of poly(allylamine hydrochloride) (PAH) and a blend of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS). When the pH of the blend solution was 3.5, the presence of PAA in this solution significantly increased the total film thickness. With only 10 wt % PAA in the blend adsorption solution, a large increase in film thickness was observed (92 nm cf. 18 nm). It was also demonstrated that the total amount of PSS adsorbed was enhanced by the presence of PAA in the blend solution, showing that the blend solution composition influenced that of the multilayer films. Thin films prepared with nanoblended layers also showed improved pH stability, because they exhibited reduced film rearrangement upon exposure to acidic conditions (pH = 2.5).     

Modulation of the functions of osteoblast-like cells on poly(allylamine hydrochloride) and poly(acrylic acid) multilayer films

Deposition of layer-by-layer polyelectrolyte multilayer (PEM) films has been a widely applied surface modification technique to improve the biocompatibility of biomaterials. The objective of this study was to investigate the impact of the deposition of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) multilayer films on adhesion, growth and differentiation of osteoblasts-like MG63 cells. PAH and PAA were deposited sequentially onto tissue culture polystyrene at either pH 2.0 or pH 6.5 with 4-21 layers. While the MG63 cells attached poorly on the PAH/PAA multilayer films deposited at pH 2.0, while the cells adhered to the PEM films deposited at pH 6.5, depending on layer numbers. Cell adhesion, proliferation and osteogenic activities (alkaline phosphatase activity, expression of osteogenic marker genes and mineralization) were highest on the 4-layer PAH/PAA film and decreased with increasing layer numbers. On the other hand, the behavior of MG63 cells did not show any difference on the adjacent even and odd layers, except PEM4 and PEM5, i.e. the surface charges of the PAH/PAA multilayer films with over ten layers seem indifferent to osteoblastic functions. The results in this study suggested that the mechanical properties of PEM films may play a critical role in modulating the behavior of osteoblasts, providing guidance for application of PEM films to osteopaedic implants.     

Bioinert solution-cross-linked hydrogen-bonded multilayers on colloidal particles

Bioinert polyelectrolyte multilayers comprised of poly(acrylic acid) and polyacrylamide were deposited on colloidal particles (1.7 microm in diameter) at low pH conditions by layer-by-layer assembly using hydrogen-bonding interactions. The multilayer films were coated uniformly on the colloidal particles without causing any flocculation of the colloids, and the deposited films were subsequently cross-linked by a single treatment of a carbodiimide aqueous solution. The lightly cross-linked multilayer films show excellent stability at physiological conditions (pH 7.4, phosphate-buffered saline), whereas untreated multilayer films dissolved. The multilayer-coated surfaces, both on flat substrates and on colloidal particles, exhibit excellent resistance toward mammalian cell adhesion. With this new solution-based cross-linking method, bioinert H-bonded multilayer coatings offer potential for biomedical applications.     

A new approach for the fabrication of an alternating multilayer film of poly(4-vinylpyridine) and poly(acrylic acid) based on hydrogen bonding

A new approach for the fabrication of a multilayer film assembly is explored, which is based on the alternating assembling of poly(4-vinylpyridine) and poly(acrylic acid) via hydrogen bonding. The homogeneous multilayer films were characterized by UV-Vis, X-ray diffraction and atomic force microscopy (AFM) measurements. The nature of interaction between the two polymers is identified as hydrogen bonding by IR spectroscopy.