Polymers by the reaction of bis(pyrylium salts) with diamines: A novel approach to ionene polymers

The following reactions of pyrylium salts with amines are described: (1)bis(pyrylium salts) with amines; (2) diamines with pyrylium salts; and (3) bis(pyrylium salts) with diamines. Both (1) and (2) give bis(pyridinium salts) in high yields, and (3) gives the corresponding polymers which are isolated and characterized. This procedure was applied to cationic bis(pyrylium salts) to give cationic dimers and polymers, and further to zwitterionic bis(pyrylium salts) to yield the corresponding zwitterionic dimers and polymers.     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

New Synthetic Capabilities of Sulfonium Salts

The review summarizes published data on the synthesis and reactivity of new functionally substituted sulfonium salts: dimethyl(trifluoromethylsulfonyloxy)sulfonium trifluoromethanesulfonate, dimethyl(trifluoromethylsulfonyl)sulfonium trifluoromethanesulfonate, various disulfonium dications, dimethyl sulfidesulfur trioxide complex, acyl(dimethyl)sulfonium salts, dimethyl(trifluoroacetyl)sulfonium salts, and boron trifluoride complexes with alkylthio-substituted acyl fluorides as intramolecular analogs of acylsulfonium salts. A theoretical approach is described, which explains electrophilic reactivity of sulfonium salts.     

Synthesis and characterization of poly([3H]-thiazole-2-thione)s

The reaction of dithiocarbamate salts with α-haloketones is extended to (i) dithiocarbamate salts with bis(α-haloketones), (ii) bis(dithiocarbamate salts) with α-haloketones, and (iii) bis(dithiocarbamate salts) with bis(α-haloketones). Both (i) and (ii) give bis([3H]-thiazole-2thiazole-2-thiones) in high yields, and (iii) gives the corresponding polymers which are described and characterized.     

Pentafluorosulfanylnitramide salts

The synthesis and properties of a new class of inorganic salts, named pentafluorosulfanylnitramide salts (or pentafluorosulfanylnitraminic acid salts) [Z+SF5NNO2-], are described. A number of SF5-nitramide salts (Z+SF5NNO2-) were successfully prepared via nucleophilic displacements from carbamates and/or ion exchange techniques, but some salts [M(SF5NNO2)x; M = Li, Mg, Al] decomposed during isolation procedures and appear to be unstable in the solid state. Single-crystal X-ray diffraction was used to fully characterize the Z+SF5NNO2-, and their properties/structures are compared with those of the corresponding dinitramide salts (or dinitraminic acid salts), Z+N(NO2)2-. X-ray crystallography revealed major structural differences between N(NO2)2- and SF5N(NO2)- salts concerning the N-N distances and the angles subtended at the central nitrogen atom. In the N(NO2)2- salts, there are two nonequivalent N-N (average lengths 1.372(2) and 1.354(2) A) distances and an average N-N-N angle of 115.8(3) degrees (falls between sp3 and sp2 hybridization). In the SFsNNO2- salts, the average N-N distance is much shorter, 1.308(9) A, and the average N-N-S angle is 120.0(5) degrees (closely fits sp2 hybridization). The SF5NNO2- salts show a remarkable metrical similarity for the SF5 moiety in all structures, indicating a lack of sensitivity to its steric and electronic environment. This is in marked contrast to N(NO2)2-, where there is a wide variation in conformations adopted by these anions which can be related to their environment.     

A Simple Preparation of Anhydrous Tetra Alkylammonium Salts

Tetraalkyl ammonium (TAA) salts are of great importance in many areas of chemistry (organic, physical etc.). Tetraalkylammonium (TAA) chlorides, bromides or iodides are usually prepared by direct quaternization of trial-kyl amines with the corresponding alkyl halides. However other tetraalkylammonium (TAA) salts - cyanides, rhoda-nides, azides etc. cannot be prepared in this direct way. A typical method of preparation of these salts consists in ion exchange between available TAA halides and various salts containing the required anions. In some instances simply treating the TAA halides with aqueous solution of silver salts can be applied. This procedure, however, besides being costly is limited to the cases when the required silver salts are soluble in water¹.     

On interpretation of a missing spectral band; IR spectra of acidic salts of benzohydroxamic acid

Using solid benzohydroxamic acid (BHA) as a model compound for its salts, a broad absorption at 2730 cm(-1) was generally agreed to represent the nu(OH) band of the OH... ON bonds. The absence of nu(OH) band in the IR region 3600-1700 cm(-1) was taken to indicate the absence of OH groups in the solid salts. The same argument and conclusion was erroneously accepted for lithium (LiBHA) and potassium (KBHA) salts of BHA which are not "normal" but acid salts and do contain OH groups. X-ray diffraction results allow explanation of this discrepancy. The lithium and potassium acid salts have much shorter OH... ON bridges (O...O distances of 247 and 245 pm, respectively) than the model compound (258 pm). Accordingly, the nu(OH...O) bands in the acidic salts are shifted into the crowded 1600-700 cm(-1) interval. Obviously, interpretation of a missing spectral band in terms of molecular structure can be misleading when the models do not include all possible structural variations.     

几种芳香萘环重氮盐热解性质的研究

重氮盐是日益广范应用的光敏和热敏材料。国内外学者对重氮盐热解稳定性等问题的研究早有报道.前人研究认为:重氮盐热分解时发生C—N键的断裂,分为异裂和均裂两种.在酸性水溶液中为异裂反应,生成芳烃正离子;在碱性水溶液或醇溶液中,大多发生均裂反应,生成游离基.Brown及角田等研究发现:在苯环重氮基对位上引入强正极性基能增加重氮盐的热稳定性,但Crossley等人发现,在重氮基对位上的取代基,无论是吸电子的硝基(-NO_2)或是给电子的甲氧基(-OCH_3),都能增加重氮盐的热稳定性.然而人们还未能从理论上对于上述问题予以深入明确的探讨.取代基的不同、热解产物的不同以及     

硬段侧链含有氟化双季铵盐的聚氨酯表面性能及抗菌性能分析

研究了硬段侧链含有氟化双季铵盐的系列聚氨酯(FQPUs)的表面性能和抗菌性能. 水接触角测试和表面自由能测试结果表明, 加入少量氟化双季铵盐扩链剂, 可以使聚氨酯表面富集氟碳链, 氟化双季铵盐聚氨酯表面自由能很低, 具有很好的抗黏附性能. 迁移到表面的两条氟碳链在常温下不会发生链反转, 使材料的抗黏附性能得以保持. 同时, 使材料表面形成一层疏水层, 减小材料的吸水率. XPS研究结果表明, 氟碳链的-CF₃位于材料的最外层, 材料的次表面是具有良好杀菌性能的双季铵盐, 这样形成了具有多重抗菌性能的表面. 另外, XPS研究结果表明, 材料表面化学结构与材料本体的微相分离结构相关. 抗菌性能测试结果表明, 氟化双季铵盐聚氨酯抗金黄色葡萄球菌的能力很强, 对于大肠杆菌的抗菌效果有所下降, 但相对于单季铵盐聚氨酯的抗菌效果有一定提高.     

Synthesis and properties of new tetrachlorocobaltate (II) and tetrachloromanganate (II) anion salts with dicationic counterions

New tetrachlorocobaltate (II) and tetrachloromanganate (II) ionic compounds containing various counterdications were synthesized and characterized. These salts are soluble in polar solvents such as methanol and water. Physical properties such as thermal stability, melting point, and magnetic susceptibility of these salts depend on the cation or anion structure. The thermal stability of the phosphinium or imidazolium based salts is higher than that of the pyridinium or triethylaminonium analogues. The melting point of these compounds is following the order of triphenylphosphinium > pyridinium > imidazolium dications, and symmetrical dicationic salts > unsymmetrical ones. The magnetic susceptibility (χ_MT values) of tetrachloromanganate (II) anions-based salts is higher than that of tetrachlorocobaltate (II) anions-based salts. These dicationic salts exhibit weak antiferromagnetic interactions and have higher magnetic susceptibility than that of the previously reported tetrachloromanganate (II) and tetrachlorocobaltate(II) salts with monocationic counterion.     

Synthesis of a family of 3-alkyl- or 3-aryl-substituted 1,2-dihydroquinazolinium salts and their isomerization to 4-iminium-1,2,3,4-tetrahydroquinolines

A straightforward synthesis of substituted 1,2-dihydroquinazolinium triflates (3) is reported by reaction of 2-imino-substituted anilines with a range of carbonyl compounds in the presence of triflic acid via intermediate iminium salts. Similar reactions with di- or trialdehydes and triflic acid give bis- or tris-(1,2-dihydroquinazolinium) salts. Some 4-methyl substituted 1,2-dihydroquinazolinium salts rearrange, under various conditions, to their corresponding 4-iminium-1,2,3,4-tetrahydroquinolinium isomers (7). Most of salts 3 derived from ketones are rather unstable, which prevents their isolation or full characterization. The crystal structures of various 3 and 7 salts have been determined.     

Synthesis and structural studies of 1,1'-bis-amino-functionalized ferrocenes, ferrocene salts, and ferrocenium salts

Having isolated and characterized a series of sodium cyclopentadienide salts, we have synthesized a number of 1,1'-bis-amino-functionalized ferrocenes, 1,1'-bis-amino-functionalized ferrocene salts, and 1,1'-bis-amino-functionalized ferrocenium salts. Among these are the first crystallographically characterized examples of cyclopentadienyl units containing (piperidin-N-ylethyl)- and (pyrid-2-ylmethyl)cyclopentadienyl side chains. In the cases of some of the ferrocenes, ferrocene salts, and ferrocenium salts, there are some interesting structural features in the solid state. These include C-H...N and C-H...pi cloud interactions as well as N-H...O and N-H...F hydrogen bonds.     

Quaternary trialkyl(polyfluoroalkyl)ammonium salts including liquid iodides

New quaternary ammonium salts that contain polyfluorinated alkyl substituents were prepared by the polyfluoroalkylation of tertiary amines with polyfluorinated alkyl iodides. Metathesis reactions of the iodide salts with fluorine-containing anions resulted in new low melting salts. The iodide salts of the tri(isooctyl)polyfluoroalkyl amines are also liquids at 25°C.     

Bile Salts in Chiral Micellar Electrokinetic Chromatography: 2000–2020

Bile salts are naturally occurring chiral surfactants that are able to solubilize hydrophobic compounds. Because of this ability, bile salts were exploited as chiral selectors added to the background solution (BGS) in the chiral micellar electrokinetic chromatography (MEKC) of various small molecules. In this review, we aimed to examine the developments in research on chiral MEKC using bile salts as chiral selectors over the past 20 years. The review begins with a discussion of the aggregation of bile salts in chiral recognition and separation, followed by the use of single bile salts and bile salts with other chiral selectors (i.e., cyclodextrins, proteins and single-stranded DNA aptamers). Advanced techniques such as partial-filling MEKC, stacking and single-drop microextraction were considered. Potential applications to real samples, including enantiomeric impurity analysis, were also discussed.     

含能盐和含能离子液体

近年来含能盐和含能离子液体由于其独特的性质而受到广泛关注。本文综述了多种含能盐和含能离子液体（阳离子包括三唑、四唑、双环唑、六次甲基四胺等;阴离子包括硝酸根、高氯酸根、硝基唑、叠氮根、四硝基铝、多腈基化合物、二硝基尿素等）的合成;结合其表征结果分析了阳离子上的取代基以及阴阳离子对它们的性能如熔点、生成焓、密度等的影响。对含能盐和含能离子液体在炸药和推进剂方面的应用进行了展望。     

A proposed structure for the copper(ii) salts of α-acyloin oximes

The behavior of the copper (II) salts of the a-isomers of some acyloin oximes towards a series of selected amines was examined in order to study the unusual solubility relationships which these copper salts exhibit towards ammonium hydroxide. The insolubility in ammonium hydroxide of these copper salts of acyloin oximes has been attributed to their being inner complex salts. Evidence is presented which is contra y to this view. Based on the solubilities of the copper (II) salts investigated, a polymeric structure for copper (II) acyloin oximes is proposed. The study included the following α-isomers of acyloin oximes: benzoin oxime, 2,2'-furoin oxime, phenylbenzoin oxime, methylbenzoin oxime, 2,2'thenoin oxime, a-hydroxyisobutyrophenone oxime, and α-hydroxyacetophenone oxime. The last four compounds had not been examined previously as to their ability to form copper (II) salts.     

Studies on tellurium-containing heterocycles. Part 20. Reactions of 2-benzoselenopyrylium salts and 2-benzotelluropyrylium salts with nucleophiles: formation of 1-functionalized 1H-isoselenochromenes and 1H-isotellurochromenes

The reactions of the 2-benzoselenopyrylium (1A) and 2-benzotelluropyrylium cations (1B) with a variety of nucleophiles have been investigated. LiAlH(4), sodium alkoxide (NaOMe, NaOi-Pr and NaOt-Bu), diethylamine, n-butylamine and acetone reacted with 1 to give the 1H-isochromenes (2) and the corresponding 1-substituted products (4-9) under mild conditions in almost good to high yields. The 1-alkyl(phenyl)isoselenochromenes (10-13) and 1-benzylisochromenes (18A, 18B), which were produced by the reaction of the salts 1 with Grignard reagents, were converted to the corresponding 1,3-disubstituted 2-benzopyrylium salts (14-17, 19) by treatment with triphenylcarbenium tetrafluoroborate (Ph(3)C(+) BF(4)(-)), respectively. The 1-benzylselenopyrylium salts (19A) and 1-benzyltelluropyrylium salts (19B) exist in the solvent as an equilibrium mixture of the salts (19) and the corresponding (Z)-benzylidene compounds (20).     

三门峡虢季墓遗址盐害分析与调查

针对三门峡虢季墓遗址部分区域存在起甲、泛白、疱疹等由可溶盐引起的病害,在其遗址不同部位取样进行土遗址本体含盐分析.取样区域包括虢季墓、梁姬墓和近代墓遗址.采用X射线荧光光谱(XRF)和离子色谱(IC)分析所取样品的可溶盐成分、含量及可溶盐成盐元素在土遗址中的成盐规律.采用电子能谱(XPS)和X射线衍射(XRD)分析样品的物相组成及盐分状态,扫描电子显微镜/能谱(SEM/EDS)进一步考察含盐土质的颗粒组成、微观形貌等.结果表明:虢季墓取样区域所含盐分主要为Na_2SO_4、CaCO_3和少量的其他盐分如CaCl_2、KNO_3和NaCl等.靠近地面部位所取样品盐分含量高于其他部位,盐害表现更为明显.梁姬墓取样区域总盐分含量略高于虢季墓与近代墓,硝酸盐含量较高.而近代墓遗址可溶盐盐分含量略低,盐害不明显.在不同取样点可溶盐含量有所差异,但在邻近区域,其成盐具有一定规律性,这一点对于遗址基体中盐害的深入研究与防治具有重要意义.     

Micellar electrokinetic chromatography of tri aza aromatic ligand compounds of iron (II): influence of bile salt type on enantiomeric separation.

Micellar electrokinetic chromatography is used with a variety of bile salt micelles to separate the enantiomers of bis(8-((pyridine-2-methylene)amino)quinoline)iron(II) hexafluorophosphate, Fe(PMAQ)2(PF6)2; bis(8-((pyridine-2-methylene)amino)lepidine iron(II) hexafluorophosphate, Fe(PMAL)2(PF6)2; and bis(1-(2-pyridinyl)ethylidine)-8-aminoquinoline iron(II) hexafluorophosphate, Fe(PEAQ)2(PF6)2. The influence of ten different bile salts on the resolution of each pair of enantiomers is investigated. Significant changes in resolution are seen depending upon the bile salt used. The dihydroxy bile salts are superior to the trihydroxy bile salts in terms of resolution, and the taurine or glycine conjugated bile salts yield better results than the unconjugated bile salts. Resolution for most enantiomers is maximized in a buffer solution containing 10-15% acetone and employing either taurochenodeoxycholic or glycochenodeoxycholic acid as the bile salt. Evidence for the separation of the corresponding Fe(III) complexes is presented.     

Energetic salts based on dipicrylamine and its amino derivative

Energetic salts based on dipicrylamine and its amino derivative were synthesized. All salts were fully characterized by multinuclear NMR spectroscopy ((1)H, (13)C), vibrational spectroscopy (IR), and elemental analysis. Ethylenediammonium di-DPA (DPA=dipicrylamine) and 1,3-diaminoguanidinium DPA were further confirmed by single-crystal X-ray diffraction. These salts exhibit reasonable physical properties, such as high densities (1.71-1.81 g cm(-3)), good thermal stabilities (T(d) =155-285 °C), and low solubilities in water. The impact sensitivity of 1-methyl-3,4,5-triamino-1,2,4-triazolium DPA is lower than that of 2,4,6-trinitrotoluene (TNT), and for some other energetic salts their impact sensitivities are comparable to that of TNT. Based on experimental densities and theoretical calculations carried out by using the Gaussian 03 suite of programs, all the salts have calculated detonation pressures (22.5-27.8 GPa) and velocities (7226-7917 m s(-1)) that exceed those of conventional TNT. The toxicities of these salts measured by luminescent bacteria toxicity tests are much lower than that of TNT, and two binary eutectic mixtures with melting points that fall between 70 and 100 °C were identified.