电导率法测定表面活性剂的临界胶束浓度

电导率法测定表面活性剂的临界胶束浓度邹耀洪（常熟高等专科学校化学系江苏２１５５００）物化实验中测定表面活性剂临界胶束浓度（ＣＭＣ）常用表面张力法［１］，但精确测定表面活性剂水溶液的表面张力受到一些限制，如毛细管升高法中要准确地测定毛细管的半径、溶液的...     

吸附伏安法测定表面活性剂的临界胶束浓度

以易溶于有机溶剂，微溶于水的氧化－还原指示剂中性红为探针，用吸附伏安法测定了阴离子表面活性剂的临界胶束浓度。测量的基本原理是：存在于表面活性剂溶液中的微量中性红在悬汞电极上的吸附伏安峰电流对表面活性剂浓度的曲线在临界胶束浓度处有一拐点。     

用分子自由振动固有频率预测阴离子表面活性剂临界胶束浓度

用分子自由振动固有频率预测阴离子表面活性剂临界胶束浓度;CMC;QSPR     

直接紫外法测定混合表面活性剂的临界胶束浓度

临界胶束浓度(C.M.C.)是表征表面活性剂性质的重要指标之一,是决定表面活性剂用量的依据。近年来,由于混合表面活性剂的协同增效作用,混合表面活性剂已被广泛用于生产和分析中,而其C.M.C.值报道较少。本文对工业生产和分析测试中常用的十二烷基硫酸钠(SDS)、十二烷基苯磺酸钠(SDBS)、十六烷基三甲基溴化铵(CTMAB)、十二烷基二甲基苄基氯化铵(DDMBAC)与辛基酚     

表面张力法和电导法对比测定表面活性剂临界胶束浓度*

通过比较表面张力法和电导法测定阴离子表面活性剂十二烷基硫酸钠(SDS)和非离子表面活性剂辛基酚聚氧乙烯醚(TX-100)的临界胶束浓度的实验效果,明确了2种方法的优劣。 采用挂环法测试了不同浓度SDS和TX-100水溶液的表面张力,得到了它们的临界胶束浓度以及饱和吸附量、分子截面积;采用电导法研究上述2种表面活性剂溶液的电导率曲线,仅得到SDS的临界胶束浓度。与电导法相比,表面张力法得到的表面活性剂性质信息更多,应用更广泛。该实验使学生加深理解不同电性表面活性剂临界胶束浓度的性质及测定方法,明确不同方法的优缺点,扩大知识面,同时也提高学生处理数据的能力,为学生今后进一步学习应用表面活性剂打下良好基础。     

多种类表面活性剂临界胶束浓度定量构效关系

表面活性剂的临界胶束浓度(CMC)是个非常重要的物质特性参数, CMC在研究表面活性剂的工业应用和生物利用方面发挥着关键作用. 本工作提出了一个新的拓扑指数—扩展距离矩阵, 建立了一个稳定的构效关系模型, 并对175种表面活性剂的临界胶束浓度进行了计算预测. 结果表明, 基于新的拓扑指数建立的构效关系模型计算临界胶束浓度能给出稳定可靠的预测结果, 其预测结果相关性系数R²(training set)=0.9295, 相对标准偏差ARD(training set)=8.20%, R²(testing set)=0.9257, ARD(testing set)=6.76%. 与文献中模型预测结果的对比表明, 本工作在稳定性和可靠性上均有显著改善.     

表面活性剂胶束形状随浓度转变的核磁共振研究

运用核磁共振一维氢谱和自扩散实验方法研究了聚乙烯乙二醇异辛酚醚(TX-100)、十二烷基苯磺酸钠(SDBS)和十四烷基三甲基溴化铵(TTAB)三种不同类型的表面活性剂在重水溶液中的胶束形状转变, 发现它们在临界胶束浓度以上的各自相应浓度都有胶束形状的变化(由球状转变为椭球状或棒状). 在常温常压和没有其他添加剂的情况下, 表面活性剂溶液浓度高于其临界胶束浓度时, 球状胶束开始形成. 核磁共振一维氢谱和自扩散实验的结果显示, 当溶液浓度继续增加到一定程度时, 溶液中表面活性剂分子的化学位移和自扩散系数的变化速率都有明显的转折, 这说明溶液中球状胶束开始发生转变. 进一步通过仔细分析对比核磁共振一维氢谱中各基团谱峰, 发现表面活性剂胶束亲水表面上的质子的化学位移变化速率要远高于其疏水内核中的质子, 据此推测胶束形状很可能由球状转变为椭球状或棒状.     

基于光纤折射率传感原理的表面活性剂临界胶束浓度测定方法

提出并研究了一种新颖的基于光纤折射率传感原理的表面活性剂临界胶束浓度(cmc)测定方法.应用此方法测定有代表性的阴离子表面活性剂十二烷基硫酸钠(SDS)与阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)在25℃下的cmc分别为8.05×10-3和9.11×10-4mol·L-1,与文献值比较,结果相当吻合.从而证实了本方法的准确性.进一步研究了各种条件对测量表面活性剂cmc的影响,结果表明温度和无机盐NaCl的加入对本方法测量的准确性影响小,证明了本方法对测试环境的要求不苛刻,适用性好.最后对本方法进行了重复性和稳定性测试,相对标准偏差(RSD)为0.17%,与预期符合,效果良好.     

无探针荧光光谱法测定十二烷基硫酸钠的临界胶束浓度

建立了无探针荧光光谱法测定表面活性剂临界胶束浓度(CMC)的新方法,测定了典型阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶液中的CMC,并与表面张力法和电导率法的测定结果进行了对比。结果表明,荧光光谱法样品用量少,测定的SDS的CMC与传统方法一致,说明采用无探针荧光光谱法能够测定一些物质的临界浓度。     

Determination of Critical Micelle Concentration by Electrochemical Means

Abstract

Overview of electrochemical methods for critical micelle concentration (cmc) determination is given. The principles and examples of cmc determination by conductometry, potentiometry, tensammetry, polarography, voltammetry, electrophoresis, and isotachophoresis are reviewed and discussed.     

Determination of the Critical Micelle Concentration of Cationic Surfactants by Capillary Electrophoresis

The determination of the critical micelle concentration (CMC) of cationic surfactants by capillary electrophoresis was demonstrated. In this study, tetradecyltrimethylammonium bromide (TTAB) and dodecyltrimethylammonium bromide (DoTAB) were selected as cationic surfactants and propazine was chosen as test solute. In the evolution of the effective electrophoretic mobility of propazine as a function of surfactant concentration, a dramatic change in slope at a particular concentration is a good indication of the CMC of this surfactant. The CMC values determined experimentally were further confirmed by a curve-fitting approach. Simulation of the electrophoretic mobility curves as a function of surfactant concentration in both micellar electrokinetic chromatography and capillary zone electrophoresis using cationic surfactants as an electrolyte modifier was performed for propazine, and the intersection of these two mobility curves allowed us to precisely predict the CMC of the surfactant. The CMC values determined for TTAB and DoTAB are 1.6 ± 0.1 and 11.0 ± 0.1 mM, respectively, in the case of an electrolytic solution consisting of 70 mM phosphate buffer at pH 6.0. Moreover, the applicability of the electroosmotic mobility as a parameter for the determination of the CMC was examined.     

荧光探针法测定甜菜碱cmc的研究

荧光探针法测定甜菜碱ｃｍｃ的研究任学贞，李干佐，王弘立，翟立民，隋卫平，徐欣艳（山东大学化学系，济南，２５０１００）关键词甜菜碱，芘，临界胶束浓度Ｅｋｗａｌｌ等［１］发现，表面活性剂的溶液能够增溶多环芳烃并发射较强的荧光．在常用的测定表面活性剂临界胶...     

荧光探针法研究新型Gemini表面活性剂在水溶液中的聚集行为

以芘为荧光探针、二苯酮为猝灭剂,用稳态荧光探针法测定了新型Gemini表面活性剂的临界胶团浓度(CMC)、胶团聚集数(N_agg)及胶团微极性.研究了Gemini表面活性剂结构和氯化钠浓度对CMC、N_agg、胶团微极性的影响.结果表明,新型Gemini表面活性剂的CMC比常规表面活性剂的CMC低1—2个数量级.当疏水基碳原子数增加时,CMC依次降低,N_agg增大,胶团微极性减小.当氯化钠浓度增大时,N_agg增大,胶团微极性减小.     

A Monomer‐Micelle Model for the Formation of Simple Taurocholate Micelles

A kinetic dialysis technique was used to validate a relationship between monomer taurocholate (TC) concentration and total TC concentration in TC solutions containing 0.15 M NaCl and 0.01 M buffer (pH = 7.4). Based on the experimental data and Mukerjee's equations, the number average degree and the weight average degree of TC aggregates were estimated to be nearly the same (～5), indicating that simple TC micelles were the only aggregates. Furthermore, the TC dimer concentration was quantified to be negligible. According to the validated relationship, aggregation number of 5 for simple TC micelles, and the definition of critical micelle concentration (CMC), a modified monomer‐micelle model was used for describing simple TC micelle formation. Moreover, the CMC value was estimated to be ～6.3 mM, which is consistent with the reported value of ～6.0 mM.     

Determining the Critical Micelle Concentration in O/W Emulsion Using the Rate Constant of Hydrolysis for Benzyl Acetate

An attempt to evaluate the kinetically effective critical micelle concentration CMC of sodium dodecyl sulfate (SDS) in micellar solutions and in O/W emulsions at 40°C and pH 9 utilizing the pseudo first order rate constant of benzyl acetate hydrolysis was implemented. The critical micelle concentration of SDS in micellar solutions was determined by both surface tension measurements utilizing Wilhelmy plate technique and by rate constant of hydrolysis. Hydrolysis reaction of benzyl acetate was monitored in surfactant solutions as well as in o/w emulsions as a function of time. Emulsion droplets were controlled using microfluidizer 110 T and oily droplets were separated from the emulsion by ultracentrifugation at (11,500 rpm or 9,800 g) prior to analysis by high performance liquid chromatography. The value of the critical micelle concentration (CMC) in micellar solutions in the presence of benzyl acetate as determined from the Wilhelmy plate technique was 7.8 × 10^?4 moles/L (CMC in micellar solution was 10 times lower than the value in literature due to use of buffer) while the CMC as determined from the kinetic study was 8.8 × 10^?4 moles/L. In emulsion systems, using 5% mineral oil, the CMC value was 8.6 × 10^?3 moles/L and at 10% oil, the value doubled to 1.73 × 10^?2 moles/L. The above results indicate that kinetics can be used to determine CMC in micellar solutions and in o/w emulsions.     

DMABN测定含溴化钠或正丁醇水溶液中表面活性剂的临界胶团浓度

以对二甲氨基苯甲腈(DMABN)为探针, 测定它在含NaBr或n-C4H9OH的表面活性剂十二烷基三甲基溴化铵(C12TABr)、季铵盐Gemini表面活性剂C12-3-C12·2Br和十二烷基硫酸钠(SDS)水溶液中的第二重荧光对应的强度(Ia)和特征波长(λa)对表面活性剂浓度(c)曲线. 由Ia-c曲线的转折点或λa-c曲线对应的一阶导数极小点可以获得临界胶团浓度(cmc), 扩展了DMABN探针测定表面活性剂cmc的适用性.     

Determination of the Critical Micelle Concentration of Surfactant in Aqueous Solution by Twisted Intramolecular Charge Transfer Probe DMABN

With p-N,N-dimethylaminobenzonitrile (DMABN) as a probe, the variations of the intensity of its second fluorescence emission (I_a) and the corresponding characteristic wavelength (λ_a) with the surfactant concentration (c), here the examined surfactants (C₁₂TABr, SDS, C₁₂E₂₃, and C₁₂-3-C₁₂·2Br), were measured by Hitachi F4500 fluorescence spectrophotometer. The results showed that both the break points on the I_a–c curve and the minimum of the derivative variation corresponding to the λ_a–c curve agreed very well with the critical micelle concentration (cmc) of the surfactant in aqueous solution as measured by surface tension technique. Due to strong aggregation of C₁₂-3-C₁₂·2Br in aqueous solution, the information about loose micellar structure could be obtained by its λ_a–c curve.