Morphologies and microstructures of carbon nanotubes prepared by self—sustained arc discharging

We have investigated the morphology and microstructure of carbon nanotubes and nanoparticles in cathode deposits prepared by self-sustained arc discharge. Scanning electron microscopy images indicate that there are two regions exhibiting different morphologies on the top surface of the cathode deposits. In the central region, there is a triangular pattern of spots with a diameter up to 100μm, which consists of carbon nanotubes and nanoparticles. In the fringe region, carbon nanotubes and nanoparticles are distributed randomly. In addition, carbon nanotubes in the central region have a larger inner diameter, compared with those in the fringe region. The outer diameter distribution of tubes in the central region is narrower than that of tubes in the fringe region, while the former has a smaller peak value than the latter. For the nanoparticles, they exhibit a different behaviour from the tubes existing in the same region. The difference between the microstructure of tubes or particles in the two regions is attributed to the different temperatures and temperature gradients during their formation.     

Metallic nanoparticles on plasma treated carbon nanotubes: Nanohybrids

Multi-wall carbon nanotubes (MWCNTs) were decorated with metal clusters by thermal evaporation. Transmission electron microscopy (TEM) shows that the nature and extent of metal coverage can be varied by plasma treating the MWCNT surface. The metal clusters on oxygen plasma treated arc-discharge MWCNTs have a more dense distribution than the clusters evaporated on as-synthesized arc-discharge MWCNTs. In contrast, the plasma treatment did not affect the cluster distribution on CVD MWCNTs. Analyses of the valence band and the core levels by X-ray photoelectron spectroscopy suggest poor charge transfer between gold clusters and MWCNTs; on the contrary suggest good charge transfer between Ni clusters and MWCNTs.     

Iron nanoparticles grown in a carbon arc discharge

Summary Iron particles, encapsulated by graphite layers, were produced by means of the Kratschmer arc discharge method in an iron pentacarbonyl atmosphere. The M?ssbauer effect is dominated by the vibration of the particles as a whole. Superparamegnetism is dominant for iron oxide particles. No endohedral iron fullerenes were observed, contrary to a previous report. Paper presented at ICAME-95, Rimini, 10–16 September 1995.     

Organisation of carbon and boron nitride layers in mixed nanoparticles and nanotubes synthesised by arc discharge

2 bonds attests for the presence of ordered BN domains and of carbon domains; (ii) the elemental profiles show that BN layers and carbon layers are immiscible with a radial organisation into two to five domains; and (iii) the sets of layers at free surfaces – including the inner surfaces of tubes – are always made of carbon. The origin of this chemical organisation, which is most likely obtained during the growth, is discussed. For the hafnium-boride metallic particles coated by C/BN envelopes, a model based on the solidification from the outside to the inside of isolated liquid-like droplets is proposed: the carbon phase solidifies first according to theoretical phase diagrams, and forms the outer shells. For the tubes, a directional eutectic solidification process is shown to account for the observed C/BN/C sequence, in a vapour–liquid–solid scheme, with an hafnium-rich liquid-like particle at the tip of the tube. Received: 26 November 1998 / Accepted: 14 January 1999     

Solidification of gold nanoparticles in carbon nanotubes

The structure and the solidification of gold nanoparticles in a carbon nanotube are investigated using molecular dynamics simulations. The simulations indicate that the predicted solidification temperature of the enclosed particle is lower than its bulk counterpart, but higher than that observed for clusters placed in vacuum. A comparison with a phenomenological model indicates that, in the considered range of tube radii (R(CNT)) of 0.5 < R(CNT) < 1.6 nm, the solidification temperature depends mainly on the length of the particle with a minor dependence on R(CNT).     

Synthesis of 6H-SiC single-crystal nanowires in a flow of carbon-silicon high-frequency arc plasma

Silicon carbide 6H-SiC nanoparticles and nanowires were obtained in carbon-silicon high-frequency arc plasma plasma in a helium atmosphere at a pressure of 0.1–0.6 MPa. It was shown that 6H-SiC nanowires grow from the arc plasma, as well as from the vapor, according to the known mechanism of vapor-solid condensation on a cold surface covered with single-crystal silicon carbide nuclei. The content of silicon carbide nanowires in the condensate reached 60 wt %. The obtained single-crystal silicon 6H-SiC nanowires had the diameter of 15–18 nm and length of 200–600 nm.     

Electron-hole plasma excitations in single-walled carbon nanotubes

We study theoretically the π-electron-hole plasma excitations in single-walled metallic carbon nanotubes within the framework of the classical electrodynamics. The π-electrons and holes of the nanotubes are described by means of the two-fluid hydrodynamic theory. Numerical results show that the low-energy excitations are in qualitative agreement with low-frequency excitations (π plasmon) in experimental observations in the case where the π-electron and hole effective masses are nearly equal.     

High catalytic performance of Pt nanoparticles on plasma treated carbon nanotubes for electrooxidation of ethanol in a basic solution

Nanosized Pt particles deposited on plasma treated multi-walled carbon nanotubes have been used in electrocatalytic oxidation of ethanol in a basic solution. These Pt nanoparticles have very narrow size distribution and exhibit significant higher catalytic activities, higher Pt utilization efficiency (93.77%) and improved durability in comparison to the commercial available Johnson Matthey Pt/C catalyst.     

Synthesis of tungsten carbide nanoparticles in WO3 pyrolysis in a plasma arc

Synthesis of tungsten carbides is investigated in the process of WO₃ pyrolysis in a dc electric arc during dispersion of a composite electrode (graphite-WO₃) in a helium medium at 25 Torr. The synthesized material is analyzed by high-resolution transmission electron microscopy. The interplanar spacings of nanocrystallites are measured directly by using both TEM images and electron diffractometry. The size distribution functions of nanoparticles containing tungsten are measured. It is shown that W, WC, W₂C, and WO₃ nanoparticles can be obtained in the conditions of the present experiments. The content of these compounds in the synthesized material was quantitatively assessed. It is shown that the W₂C content forms the dominant portion of nanoparticles in the synthesized material.     

Electronic structure of Pd nanoparticles on carbon nanotubes

The effect of the oxygen plasma treatment on the electronic states of multi-wall carbon nanotubes (MWCNTs) is analyzed by X-ray photoemission measurements (XPS) and UPS, both using synchrotron radiation. It is found that the plasma treatment effectively grafts oxygen at the CNT-surface. Thereafter, the interaction between evaporated Pd and pristine or oxygen plasma-treated MWCNTs is investigated. Pd is found to nucleate at defective sites, whether initially present or introduced by oxygen plasma treatment. The plasma treatment induced a uniform dispersion of Pd clusters at the CNT-surface. The absence of additional features in the Pd 3d and C 1s core levels spectra testifies that no Pd-C bond is formed. The shift of the Pd 3d core level towards high-binding energy for the smallest clusters is attributed to the Coulomb energy of the charged final state.     

Field electron emission from carbon nanotubes in the presence of a weak high-frequency electric field

Series of narrow peaks in the frequency range of f ≈ 50–1200 MHz have been revealed in the frequency responses of the emission current from carbon nanotubes in the presence of a weak high-frequency electric field. The analysis makes it possible to attribute these peaks to resonance of the first and second harmonics of forced mechanical vibrations of carbon nanotubes in a high-frequency electric field. The determined Q factor of nanotubes is in the range of 100–300.     

Effects of gravity on single-wall carbon nanotubes synthesized by arc in water

The method using arc discharge in liquid is a simple and inexpensive route for synthesis of carbon nanotubes and other related nano-materials. In this study, we report the synthesis of single-wall carbon nanotubes (SWCNTs) by means of the arc-in-water method under extremely low gravity conditions. The strong heat convection caused by the arc plasma is suppressed under such conditions. Therefore, the boiling flow behavior and temperature distribution have been stabilized in low gravity. As a result, the possibility of the chirality control of SWCNTs by applying extremely low gravity was revealed; namely, the yield of semiconducting SWCNTs was increased and several SWCNTs of specific diameters turned out to be prominent under extremely low gravity conditions. PACS 52.80.Wq; 68.37.Lp; 81.07.De; 81.70.Ha; 82.80.Gk     

Metallic/semiconducting ratio of carbon nanotubes in a bundle prepared using CVD technique

We present an investigation of the nature of single-walled carbon nanotubes (SWCNTs) in a bundle by resonant Raman spectroscopy. The calculation has been done for the three peak positions in radial breathing mode (RBM) spectra obtained by using a laser excitation wavelength (γ) of 633 nm from He-Ne laser on SWNT bundle sample prepared by chemical vapor deposition (CVD) technique using iron catalyst at 800°C. The detailed analysis in the present study is focused on peak positions 162 cm⁻¹, 186 cm⁻¹, and 216 cm⁻¹. The firs step of the analysis is to construct a list of possible (n, m) pairs from the diameters calculated from the RBM peak positions. The parameters of SWNTs studied gives in-depth understanding of many symmetry, resonance and characteristic properties of SWNT bundles. Our results indicate that the contribution of metallic SWNTs in the bundle is small at RBM peak positions 162 cm⁻¹, 186 cm⁻¹ and in agreement with pervious results at peak position 216 cm⁻¹.     

Structure and magnetic properties of FeCo nanoparticles encapsulated in carbon nanotubes grown by microwave plasma enhanced chemical vapor deposition

Plasma enhanced chemical vapor deposition is a simple technique for preparing magnetic nanoparticles encapsulated in carbon nanotubes. We employed alloy catalysts when growing carbon nanotubes to control the composition and magnetic properties of encapsulated nanoparticles. Single-crystal nanoparticles were successfully encapsulated in carbon nanotubes, and their crystal structure varied depending on the composition of the alloy catalysts. The coercive force of nanoparticles also varied according to the composition of the catalysts.     

初始温度及碳源对碳纳米管气相爆轰法合成的影响

改变初始温度以及分别使用甲烷和乙炔气体作碳源时气相爆轰合成碳纳米管,研究了初始温度与不同碳源对碳纳米管的影响。利用X射线衍射(XRD)、透射电镜(TEM)、拉曼(Raman)光谱等对碳纳米管进行表征。结果表明,随着初始温度的升高,所合成的碳纳米管的产量减少且石墨化程度降低,但管壁会变得光滑且管径有所增加。当使用乙炔时,所合成的产物中没有碳纳米管,而是合成了石墨化程度较高的无定形碳,随着催化剂量的增加,产物中碳包覆颗粒增多且包覆层清晰可见,但存在结构缺陷。当初始温度在110~130 ℃时,使用甲烷气体运用气相爆轰的手段是合成碳纳米管的较佳方案。     

High-yield synthesis of multi-walled carbon nanotubes by arc discharge in liquid nitrogen

Synthesis of multi-walled carbon nanotubes (MWNTs) by arc discharge in liquid nitrogen is reported. As liquid nitrogen substituted both vacuum and cooling systems, high-quality MWNTs were produced at a low cost. The content of the MWNTs can be as high as 70% of the reaction product. Auger-spectroscopy analysis revealed that no nitrogen is incorporated in the MWNTs. This method can be an economical route for the mass production of highly crystalline MWNTs. Received: 5 July 2002 / Accepted: 8 July 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: +82-54/279-8298, E-mail: ce20047@postech.ac.kr     

初始温度及碳源对碳纳米管气相爆轰法合成的影响

改变初始温度以及分别使用甲烷和乙炔气体作碳源时气相爆轰合成碳纳米管,研究了初始温度与不同碳源对碳纳米管的影响。利用X射线衍射(XRD)、透射电镜(TEM)、拉曼(Raman)光谱等对碳纳米管进行表征。结果表明,随着初始温度的升高,所合成的碳纳米管的产量减少且石墨化程度降低,但管壁会变得光滑且管径有所增加。当使用乙炔时,所合成的产物中没有碳纳米管,而是合成了石墨化程度较高的无定形碳,随着催化剂量的增加,产物中碳包覆颗粒增多且包覆层清晰可见,但存在结构缺陷。当初始温度在110~130 ℃时,使用甲烷气体运用气相爆轰的手段是合成碳纳米管的较佳方案。     

Surface growth of single-walled carbon nanotubes from ruthenium nanoparticles

In this paper, we report that ruthenium is an active and efficient catalyst for growth of single-walled carbon nanotubes (SWNTs) by a chemical vapor deposition (CVD) process for the first time. High density random and horizontally superlong well-oriented SWNTs on substrate can be fabricated via CH₄ or EtOH as carbon source under suitable conditions. Scanning and transition electron microscopy investigations, Raman spectroscopy and atomic force microscopy measurements show the tubular structure, the high crystallinity, and the properties of the grown nanotubes. The results show that the SWNTs from ruthenium have better structural uniformity with less defects and provides an alternative catalyst for SWNTs growth. The successful growth of SWNTs by Ru catalyst provides new experimental information for understanding the growth mechanism of SWNTs, which may be helpful for their controllable synthesis.     

Catalytic oxidation of carbon nanotubes with noble metal nanoparticles

Catalytic oxidation of multi-walled carbon nanotubes (MWNCTs) with some noble metal nanoparticles was observed by environmental transmission electron microscopy (E-TEM). Amoeba-like movement of the nanoparticles was observed even at a temperature of ∼400 °C, which is much lower than the melting points of any of the metals. In particular, rhodium particles reacted intensely with MWCNTs, and assumed a droplet-like shape. On the other hand, gold particles caused very little erosion of the MWCNTs under the conditions of this study.