Investigation of the interaction between Co sulfide coatings and Cu(I) ions by cyclic voltammetry and XPS

The interaction between the Co sulfide coating formed on a glassy carbon electrode and Cu(I)-ammonia complexes solution was investigated by cyclic voltammetry in 0.1 M KClO₄, 0.1 M NaOH and 0.05 M H₂SO₄ solutions. It was determined that, after treating the cobalt sulfide coating formed by two deposition cycles with Cu(I)-ammonia complexes (0.4 M, pH 8.8–9.0, τ=180 s, T=25±1°C), an exchange occurs between the coating components and Cu(I). Copper(I) substitutes 75% of the Co(III) compounds present in the coating (~1.81×10^–7 mol cm^–2) because of Cu₂O (1.36×10^–7 mol cm^–2) formation. The rest of the Co(II) and Co(III) sulfide compounds are also replaced by copper with formation of Cu_{2– x} S with a stoichiometric coefficient close to 2 (~1.9). After modifying the cobalt sulfide coatings with Cu(I) ions, the total amount of metal (Co+Cu) increases, owing to the sorption of Cu(I) compounds. In addition, the number of deposition cycles decreases from 3 to 1.5 [1 cycle involves cobalt sulfide layer formation and 0.5 cycle is attributed to modifying by Cu(I) ions]. The coatings modified in the above-mentioned manner may be successfully used for plastic electrochemical metallization as Cu_{2– x} S coatings formed by three deposition cycles. Electronic Publication     

Infrared spectroscopic study of the structure of the tetrabutyl S-dithiopyrophosphate complex of silver

The structure of the complex Ag·TBDTPP (tetrabutyl S-dithiopyrophosphate) formed in HNO₃ medium was studied by IR and NMR methods. The complex is involved in the isomerization of TBDTPP in the presence of Ag⁺ and NO ₃ ⁻ ions. In the IR spectra, we observe the disappearance of P−O−P band and the occurrence of new absorption bands associated with P−S−P and P=O bonds. The silver ion is coordinated to the thiophosphoryl group of the isomer molecule. The influence of HNO₃ concentration on complex formation is discussed.     

负载硫化钴纳米颗粒的N、S共掺杂石墨烯氧还原电催化剂的制备及性能

采用D-氨基葡萄糖作为Co分散剂和碳源,硫脲作为氮源和硫源,以NaCl为模板制备负载硫化钴纳米颗粒的N、S共掺杂三维石墨烯氧还原电催化剂(CoS/N/S/rGO)。CoS/N/S/rGO具有良好的氧还原反应(ORR)活性,起始电位和半波电位分别为960和815 mV,性能与商业Pt/C相当。此外,CoS/N/S/rGO表现出明显的4电子转移特性和超低的过氧化氢产率。与基于Pt/C的锌-空气电池相比,基于CoS/N/S/rGO的锌-空气电池在6 mol·L~(-1) KOH和0.2 mol~(-1) Zn(CH_3COO)_2碱性电解质中显示出更高的恒电流放电性能以及更好的稳定性。     

Spectral,magnetic and thermal studies on homometallic and heterometallic complexes of piperanol thiosemicarbazone

Piperanol thiosemicarbazone (HL) has been interacted with Ag⁺, Co(II), Ni(II) or Cu(II) binary to produce [Ag(HL)]EtOH · NO₃, [Ag₂(L)(H₂O)₂]NO₃, [Co(L)₃], [Cu(L)(H₂O)₃(OAc)]H₂O or [Ni(L)₂] and template with Ag⁺ to form [Cu₂Ag₂(L)₂(OH)₂(H₂O)₄]NO₃ and [NiAg(L)₂(H₂O)₂]NO₃. The prepared complexes are characterized by microanalysis, thermal, magnetic and spectral (IR, ¹H NMR, ESR and electronic) studies. Ag⁺ plays an important role in the complex formation. The variation in coordination may be due to the presence of two different metal ions and the preparation conditions. The outside nitrate is investigated by IR spectra. The outer sphere solvents are detected by IR and thermal analysis. Ni(II) complexes are found diamagnetic having a square-planar geometry. Cu(II) is reduced by the ligand to Cu(I). The cobalt complex is found diamagnetic confirming an air oxidation of Co(II) to Co(III) having a low spin octahedral geometry. The ligand and its metal complexes are found reducing agents which decolorized KMnO₄ solution in 2N H₂SO₄. CoNS and NiNS are the residual parts in the thermal decomposition of [Co(L)₃] and [Ni(L)₂].     

Characteristic features of the synthesis, solubility products, and absorption spectra of basic cobalt(II) acetate, nitrate, and chloride salts

The solubility products of basic cobalt(II) salts Co(OH)_1.80(An)_0.20, where An are NO₃⁻ and CH₃COO⁻, and Co(OH)_1.50(CH₃COO)_0.50 were determined by the method of three variables. The stability of the salts Co(OH)_1.80(An)_0.20 against hydrolysis increases in the series < CH₃COO⁻ < Cl⁻. The absorption maxima of Co²⁺ ions in solutions, β-Co(OH)₂ powders, and the pink Co(OH)_1.50Cl_0.5 salt are located in the frequency regions typical of the octahedral coordination; those of CoOH⁺ ions in solutions and powders of green basic cobalt salts are in the frequency regions typical of the tetrahedral coordination. A model for the formation and interconversion of basic cobalt salts with single-charged anions is proposed.     

Structurally Precise Silver Sulfide Nanoclusters Protected by Rhodium(III) Octahedra with Aminothiolates

A 60‐nuclear silver sulfide nanocluster with a highly positive charge ( 1 ) has been synthesized by mixing an octahedral Rh^III complex with 2‐aminoethanethiolate ligands, silver(I) nitrate, and d ‐penicillamine in water under mild conditions. The spherical surface of 1 is protected by the chiral octahedral Rh^III complex, with cleavage of the C?S bond of the d ‐penicillamine supplying the sulfide ions. Although 1 does not contain d ‐penicillamine, it is optically active because of the enantiomeric excess of the Rh^III molecules induced by chiral transfer from d ‐penicillamine. 1 can accommodate/release external Ag⁺ ions and replace inner Ag⁺ ions by Cu⁺ ions. The study demonstrates that a thiolato metal complex and sulfur‐containing amino acid can be used as cluster‐surface‐protecting and sulfide‐supplying regents, respectively, for creating chiral, water‐soluble, structurally precise silver sulfide nanoclusters, the properties of which are tunable through the addition/removal/exchange of Ag⁺ ions.     

Synthesis and characterization of CoS ball in cage structures

Ball in cage structures of cobalt sulfide have been successfully prepared by a facile one-pot hydrothermal synthesis approach employing Co(NO3)2·6H2O as the cobalt source and S=C(NH2)2 as the sulfur source. The effects of the reaction parameters (volume ratio of distilled water to ethanol, reaction time and reaction temperature) on the morphology and size of the CoS structures were investigated. The synthesized product was characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. It has been confirmed that the volume ratio of distilled water to ethanol played a key role in the formation of the ball in cage structures, and the formation mechanism of the CoS ball in cage structures was also proposed. The electrochemical capacitance performances of the CoS products were studied, and the CoS ball in cage structures show excellent energy storage characteristics.     

Investigation of ion adsorption on silver sulfide,iodide and bromide precipitates by the radioactive tracer technique

The radioactive tracer method was used to investigate the adsorption of iodide and europium ions from aqueous solution on dried isoelectric precipitates of silver sulfide, silver iodide and silver bromide. The relationship between the amount of iodide ions adsorbed on Ag₂S and the iodide ion and HNO₃ concentrations in the solution was determined. It was shown that the iodide ions adsorbed on Ag₂S could be desorbed with sulfide ions. Using Ag₂S, AgI and AgBr precipitates, a relationship between the europium ion adsorption and Eu(NO₃)₃, H₂S, NaI, NaBr and NaCl concentration in solution was established. The adsorption of europium ions was also assessed in respect to the presence of lanthanum and barium ions. For adsorption measurement iodide and europium ions were labeled with their radioactive isotopes and the amounts adsorbed were determined from the measured radioactivities of the precipitates after reaching the equilibrium between the solid phase and the solution.     

Kinetics of electrochemical reactions on the Ag(Hg)/Ag4RbI5 interface

The electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ interface is investigated by a potentiostatic pulse method. It is found that the rate-determining step of the electrode reaction is electron transfer with an exchange current density of 68 mA cm^–2 and a transfer coefficient of approximately 0.45. The order of the electrochemical reaction for silver oxidation is estimated from polarization investigations of silver amalgam in various concentrations. From this it is deduced that the mercury is ionized and is implanted in the electrolyte together with silver under anodic polarization: 15Ag+85Hg–100e^–→15Ag⁺+85Hg⁺. From comparison of the electrochemical behaviour of the Ag(Hg)/Ag₄RbI₅ and Ag/Ag₄RbI₅ interfaces it is concluded that the rate of anodic silver dissolution on the Ag/Ag₄RbI₅ interface is limited by crystallization effects. Electronic Publication     

The effects of the conditions of formation of Ag-Co zeolite supported systems on their activity in the oxidation of carbon monoxide

The activity of Ag-Co zeolite catalysts in the oxidation of CO was studied. The peculiarities of the formation of Ag-Co-NaX systems with different active metal ratios were studied. The temperatures of hydrogen absorption maxima in the H₂ temperature-programmed reduction spectra of Ag-Co-NaX systems with different Ag/Co ratios correlated with the catalytic activity in the oxidation of CO. Different valence states of silver (Ag⁺, Ag⁰) and cobalt (Co³⁺, Co²⁺) were observed by X-ray photoelectron spectroscopy. It was found that the mutual influence of these states in the surface layer of Ag-Co zeolite catalysts affected their activity.     

FTIR studies of butane, toluene and nitric oxide adsorption on Ag exchanged NaMordenite

In this work, we studied the adsorption of butane, toluene and nitric oxide on NaMordenite exchanged with different amounts of silver. The reactions that occurred when the adsorbed hydrocarbons interacted with NO and the effect of water adsorption were also addressed. Different silver species were formed after ion exchange and they were detected by TPR analysis. Highly dispersed Ag₂O particles were reduced at temperatures lower than 300 °C whereas Ag⁺ exchanged ions showed two TPR peaks, which can be ascribed to species exchanged at different mordenite sites. The TPD experiments after adsorption of NO at 25 °C showed that the only desorbed species was NO₂ which was formed by the total reduction of Ag₂O particles. When the adsorbed butane was exposed to NO (1000 ppm), isocyanate species were formed on Ag⁺ ionic sites as well as Ag⁺–(NOx)–CO species. Toluene adsorption was stronger than butane since adsorbed toluene molecules were held even at 400 °C. The characteristic bands of the aromatic ring C=C bond was observed as well as that of methyl groups interacting with Ag⁺ and Na⁺ ions. However, the appearance of carboxylic groups at temperatures above 300 °C in inert flow indicated the partial oxidation of toluene due to Ag₂O species present in the samples. After contacting adsorbed toluene with NO, different FTIR bands correspond to organic nitro-compounds, isocyanate, cyanide and isocyanide species adsorbed on Ag⁺ ions, were detected. The presence of water inhibited the formation of NO₂ species and the hydrocarbon adsorption on Na⁺ sites but did not affect the toluene-Ag⁺ interaction.     

Kinetic studies on chromium-glycinato complexes in acidic and alkaline media

Two solid complexes, fac–[Cr(gly)₃] and [Cr(gly)₂(OH)]₂, (where gly is glycinato ligand) were prepared and their acid-catalysed aquation products were identified. The structure of [Cr(gly)₃] was solved by X-ray diffraction, revealing a cationic 3D sublattice with perchlorate anions inside its cavities. Acid-catalysed aquation of [Cr(gly)₃] and [Cr(gly)₂(OH)]₂ leads to the same inert product, [Cr(gly)₂(H₂O)₂]⁺, in a two-stages process. At the first stage, intermediate complexes, [Cr(gly)₂(O–glyH)(H₂O)]⁺ and [Cr(gly)₂(H₂O)–OH–Cr(gly)₂(H₂O)]⁺, are formed respectively. Kinetics of the first aquation stage of [Cr(gly)₃] were studied in HClO₄ solutions. The dependencies of the pseudo first-order rate constants on [H⁺] are as follows: k _obs1H = k ₀ + k ₁ K _p1[H⁺], where k ₀ and k ₁ are rate constants for the chelate-ring opening via spontaneous and acid-catalysed reaction paths, respectively, and K _p1 is the protonation constant. The proposed mechanism assumes formation of the reactive intermediate as a result of proton addition to the coordinated carboxylate group of the didentate ligand. Some kinetic studies on the second reaction stage, the one-end bonded glycine liberation, were also done. The obtained results were analogous to those for stage I. In this case, the proposed reactive species are intermediates, protonated at the carboxylate group of the monodentate glycine. Base hydrolysis of two complexes, [Cr(gly)₂(O–gly)(OH)]⁻ and [Cr(gly)₂(OH)₂]⁻, was studied in 0.2–1.0 M NaOH. The pseudo first-order rate constants, k _obsOH, were [OH⁻] independent in the case of [Cr(gly)₂(O–gly)(OH)]⁻, whereas those for [Cr(gly)₂(OH)₂]⁻ linearly depended on [OH⁻]. The reaction mechanisms were proposed, where the OH⁻ -catalysed reaction path was rationalized in terms of formation of the reactive conjugate base, [Cr(gly)₂(OH)(O)]²⁻, as a result of OH⁻ ligand deprotonation. Activation parameters were determined and discussed.     

Über Reaktionen oxygenierter Kobalt(II)-Komplexe. IX. Oxydative Eigenschaften von Tetrakis(äthylendiamin)-μ-peroxo-μ-hydroxo-dikobalt(III)

Reactions of oxygenated cobalt(II) complexes. IX. Oxidative properties of tetrakis(ethylenediamine)-μ-peroxo-μ-hydroxo-dicobalt(III)

1 VIII s. [1].

[(en)₂Co(O₂, OH)Co(en)₂]³⁺ ( a ) reacts with I^? in acidic aqueous solution according to: Co^III(O₂, OH)Co^III + 21^? + 5H⁺ ? 2Co^III + 3H₂O + I₂. Using I^? in excess first order rate constants are obtained which, to a first approximation, are independent of [I^?]. Comparison with kinetic data of deoxygenation of [(en)₂Co(O₂, OH)Co(en)₂]³⁺ under analogous conditions suggests that both reactions have the same rate determining step. The singly bridged species [(en)₂(H₂O)CoO₂Co(H₂O) (en)₂]⁴⁺ is shown to be the reactive intermediate in the iodide oxidation (Schema 2).     

Synthesis and Characterization of Silver Sulfide Nanoparticles Containing Sol-Gel Derived HPC-Silica Film for Ion-Selective Electrode Application

Silver sulfide nanoparticles dispersed in sol-gel derived hydroxypropyl cellulose (HPC)-silica films have been successfully synthesized using H₂S gas diffusion method. This is the first attempt to produce silver sulfide nanoparticles using this technique. Ag₂S nanoparticles are generated through reaction of H₂S gas with AgNO₃ precursor dissolved in the HPC-silica matrix. Transmission electron microscope (TEM) and atomic force microscope (AFM) analysis reveal nanoparticles size distribution from 2.5 nm to 56 nm for H₂S gas exposed sample. The surface chemistry of Ag₂S nanoparticles and sol-gel derived HPC-silica matrix is confirmed by X-ray photoelectron spectroscopy (XPS). The negative shifts in the core-level XPS Ag (3d) binding energy of Ag₂S nanoparticles are attributed to Ag : S surface atomic ratio exhibited by these nanoparticles with varying processing conditions. Following processing and characterization, suitability of the present method to produce silver sulfide ion-selective electrode is demonstrated by depositing Ag₂S nanoparticles on a graphite rod. The high reponse function of the electrode is due to the presence of nanoparticles.     

Catalysis of the Reduction of Silver Ions by Ag2S Nanoparticles

Silver sulfide nanoparticles were found to catalyze the reduction of Ag⁺ ions by sodium sulfite and hydroquinone. The change in the absorption spectrum of the reaction mixtures was studied. New bands were found to arise at 403, 415, and 426 nm depending on the reaction conditions. These bands were identified as plasmon bands of metallic silver nanoparticles. The kinetics of this process was determined under various conditions and Ag₂S nanoparticles were found to be a highly active catalyst.     

Stabilisation of reactive intermediates in molecular sieves

This paper presents studies on paramagnetic intermediates, free atoms and radicals produced in γ-irradiated molecular sieves and their reactions with adsorbate molecules or exchangeable cations. Four different systems have been investigated using EPR spectroscopy, Na-A/CH₄, AgNa-A/CH₃OH, Ag-SAPO-11/C₂H₄ and AgCs-rho/NH₃. It was found that methyl radicals are formed in two different sites in Na-A/CH₄ and in one of them they are stable at room temperature. The formation of Ag·CH₂OH⁺ radical cation with one-electron bond between silver and carbon has been established in AgNa-A/CH₃OH by EPR experiments with [¹³C]CH₃OH and DFT calculations. In Ag-SAPO-11/C₂H₄ the stabilisation of biligand silver/ethylene complex, Ag⁰(C₂H₄)₂ was postulated based on EPR and DFT results. Tetrameric silver clusters (Ag ₄ ³⁺ ) produced radiolytically in AgCs-rho/NH₃ strongly interact with two ammonia molecules as was deduced from the changes in superhyperfine structure of high-field EPR line of Ag ₄ ³⁺ pentet for zeolite exposed to [¹⁴N]NH₃ and [¹⁵N]NH₃. The presented examples clearly show that the combination of radiation methods with EPR technique is very useful to study the structure and reactivity of paramagnetic intermediates.     

Crystal Structure and Thermal Stability of Ag3(CHF2COO)3(H2O)2

X-ray diffraction analysis of [Ag₃(CHF₂COO)₃(H₂O)₂] revealed that its crystals are orthorhombic: space group Cmca, a = 13.809(4) Å, b = 15.975(2) Å, c = 12.244(2) Å, Z = 8. The thermogravimetric analysis showed that under the atmosphere of N₂ and at 101.3 kPa, silver difluoroacetate melts at 488 K; the thermal decomposition reaction occurs in the interval 493–548 K with the formation of Ag. Under the mass-spectral experiment conditions at 521 K, two processes occur simultaneously, namely, evaporation and decomposition. The following ions were detected in the mass-spectrum of silver difluoroacetate: Ag₂L⁺, Ag₂R⁺, Ag₂F⁺, Ag₂O⁺, Ag₂ ⁺, Ag⁺, LH⁺, RCO⁺, R⁺ (L = CHF₂COO, R = CHF₂).     

Photoluminescence properties of Ag2S semiconductor clusters synthesized in micropores and mesopores

Silver sulfide (Ag₂S) clusters were synthesized in microporous zeolites and mesoporous AlMCM-41 by the sulfurization of Ag⁺ ions exchanged within the pores of the host. Characterization was performed by means of XRD, UV-Vis Ag K-edge XAFS and photoluminescence. The pore size of the host has great effects on the photoluminescence properties. Ag₂S/AlMCM-41 showed photoluminescence at the longer wavelengths than Ag₂S/zeolites. The photoluminescence band of Ag₂S in the zeolite with 1-dimensional channels was narrow in comparison to the Ag₂S in zeolites with 2- or 3-dimensional channels.     

Sulfide-enhanced electrochemical capacitance of cobalt hydroxide on nanofibered parent substrate

Two approaches—substrate nanostructuring and incorporation of sulfide—were studied with the aim to increase electrochemical capacitance of cobalt (hydro)oxide. A fiber structure of cobalt was deposited electrochemically with the fibers in the order of tens of nanometers in thickness and hundreds of nanometers in length. Cobalt hydroxide film was formed on the nanostructured substrate by anodic polarization in an alkaline solution. The hydroxide formation and its electrochemical capacitance have been studied by cyclic voltammetry in conjunction with the electrochemical quartz crystal microbalance (EQCM). An irreversible behavior was typical of the first anodic polarization cycle; it turned gradually to a reversible one during subsequent cycling. EQCM measurements indicated exponential electrode mass growth during the first cycle, with subsequent transition to a quasipassive state. The redox transitions Co(II) → Co(III) → Co(IV), which determine pseudocapacitance, did not cause remarkable electrode mass change. The electrochemical capacitance of the nanofiber sample was found up to five times higher when compared to that formed on conventional cobalt (abraded surface). Specifics of “per 1 g” evaluation of capacitance performance is discussed. Measurements showed that about 10% of the entire hydroxide structure took part in the capacitive process. The capacitance value determined per 1 g of active Co(OH)₂ was in agreement with the limiting value predicted by the Faraday’s law (2,421 F g⁻¹) sulfide-enhanced system with 18% CoS exhibited up to three times higher capacitance when compared to that of the sulfide-free counterpart. The system shows promise for practical applications due to its low cost and technical simplicity.     

Measurement and modelling of solubility for calcium sulfate dihydrate and calcium hydroxide in NaOH/KOH solutions

The solubility of calcium sulfate dihydrate (CaSO₄·2H₂O) and calcium hydroxide (Ca(OH)₂) in alkali solutions is essential to understand their desilication behavior from Bayer liquor. In this work, solubilities of calcium sulfate dihydrate and calcium hydroxide for the ternary systems of CaSO₄·2H₂O–NaOH–H₂O, CaSO₄·2H₂O–KOH–H₂O, and Ca(OH)₂–NaOH–H₂O were measured by using the classic isothermal dissolution method over the temperature range of 25–75 °C. The Pitzer model embedded in Aspen Plus platform was used to model the experimental solubility data for these systems. The experimental solubility data was employed to obtain the new binary interaction parameters for Ca(OH)⁺–OH⁻, Ca(OH)⁺–Ca²⁺ and Ca(OH)⁺–K⁺, suggesting that the species Ca(OH)⁺ is a dominant species in simulated solubility for alkali systems. Validation of the parameters was performed by predicting the solubility for the ternary systems of Ca(OH)₂–NaOH–H₂O, CaSO₄·2H₂O–NaOH–H₂O and CaSO₄·2H₂O–KOH–H₂O with the overall average relatively deviation (ARD) of 2.12%, 0.75% and 1.63%, respectively.