Ion-selective electrodes based on siderophores: Salicylate response of a ferrimycobactin membrane

Siderophores are compounds which transport iron across cell membranes; mycobactins are hydrophobic siderophores and were expected to be suitable for inclusion in the organic membrane phase of a liquid ion-exchange electrode responsive to iron(III) ions. In practice, no iron(III) response was obtained from mycobactin membranes (in a variety of solvents), but they did respond to salicylate ion with a sensitivity of 27–29 mV/decade over the range 2 × 10^?3–3 × 10^?2 mol l^?1 at pH 7. The effects of pH and interference by other anions are described and the possible mechanisms of the electrode are discussed. The selectivity of the electrode for salicylate is better than that of quaternary ammonium liquid ion-exchange electrodes.     

基于酞菁铜衍生物为载体的电极对水杨酸根的选择性电位响应

本文以2,9,16,23-四硝基酞菁铜(II) (Cu(II)TNPc) 和2,9,16,23-四氨基酞菁铜(II) (Cu(II)TAPc) 为载体制备PVC聚合膜,构建了水杨酸根选择性电极,并探讨了该电极的选择性响应性能。研究了增塑剂的性质、载体的含量及阴、阳离子添加剂对电极电位响应的影响。结果表明,基于Cu(II)TNPc为载体的PVC膜电极对水杨酸根 (Sal－) 呈现出优先选择性电位响应。具有最佳电位响应的电极的膜组成是：(w/w) 3.0% Cu(II)TNPc,67.0% o-NPOE,29.5% PVC和0.5% NaTPB。基于该组成的电极的线性响应范围为1.0×10－1－9.0×10－7 mol·L－1,检测下限为7.2×10－7 mol·L-1,斜率为－59.8±0.5 mV/decade;其响应快速,稳定性好,适宜的pH范围是3.0－7.0。并成功运用于了实际样品中水杨酸含量的测定,获得令人满意的结果。     

Salicylate-Selective PVC Membrane Electrodes Based on Tribenzyltin(IV) Phenolates as Neutral Carriers

ABSTRACT

A series of tribenzyltin(IV) phenolates were synthesized and used as anion ionophores for PVC membrane electrodes; these novel electrodes exhibit a linear response towards salicylate and an anti-Hofmeister selectivity pattern with high specificity for salicylate over many common anions. The results show that the behavior of the electrodes is considerably influenced by the structures of the carriers and the experimental conditions. Electrodes based on tribenzyltin(IV) p-nitrophenolate possess the best potentiometnc response characteristics and show a linear log[Sal^?] vs. EMF response over the concentration range 0.1–3.98×10^?6 mol.L^?1 in phosphate buffer solutions of pH 5.38 with a detection limit of 2.51×10^?6 mol.L^?1 and a slope of -57.05 mV per decade. The response mechanism was also investigated by use of a.c. impedance and anion transport across liquid membranes. The electrodes were applied to the determination of salicylate in urine samples with satisfactory results.     

Effects of carbon nanofiber composites on electrode processes involving liquid|liquid ion transfer

Composite electrodes were prepared from chemical vapor deposition grown carbon nanofibers consisting predominantly of ca. 100 nm diameter fibers. A hydrophobic sol–gel matrix based on a methyl-trimethoxysilane precursor was employed and composites formed with carbon nanofiber or carbon nanofiber—carbon particle mixtures (carbon ceramic electrode). Scanning electron microscopy images and electrochemical measurements show that the composite materials exhibit high surface area with some degree of electrolyte solution penetration into the electrode. These electrodes were modified with redox probe solution in 2-nitrophenyloctylether. A second type of composite electrode was prepared by simple pasting of carbon nanofibers and the same solution (carbon paste electrode). For both types of electrodes it is shown that high surface area carbon nanofibers dominate the electrode process and enhance voltammetric currents for the transfer of anions at liquid|liquid phase boundaries presumably by extending the triple-phase boundary. Both anion insertion and cation expulsion processes were observed driven by the electro-oxidation of decamethylferrocene within the organic phase. A stronger current response is observed for the more hydrophobic anions like ClO₄⁻ or PF₆⁻ when compared to that for the more hydrophilic anions like F⁻ and SO₄²⁻. Presented at the 4th Baltic Conference on Electrochemistry, Greifswald, March 13–16, 2005     

A TTF–TCNQ Electrode as a Voltammetric Analogue of an Ion‐Selective Electrode

A TTF‐TCNQ/PVC composite electrode is proposed as a voltammetric cation and anion sensor. The electrode relies on the principle that, during redox processes involving the TCNQ^0/? couple for cations and the TTF^+/0 couple for anions, electrolyte ions are included into lattice sites in the charge neutralization process. This voltammetric ion‐sensor provides results that are similar to those of sensors based on two electrodes (viz. one modified with TCNQ for cations and another modified with TTF for anions) but with some practical advantages over them.     

Phenoxy-substituted boron subphthalocyanine as a ionophore of ion-selective electrodes

Phenoxy-substituted boron subphthalocyanine was synthesized and studied as an ionophore of plasticized polyvinyl chloride membranes of ion-selective electrodes. The electrodes exhibit reversible response to dobutamine, demonstrating the cation function, as well as reversible response to the salicylate anion. The effects of concentration of the ionophore (0.2–5 wt %) and ionic components (sodium tetraphenylborate, TPhBNa, and tributylhexadecylphosphonium bromide, TBGDPBr), including ionic liquids (ILs), such as diphenylbutylethylphosphonium bis(triflyl)imide, diphenylbutylethylphosphonium hexafluorophosphate, and 1,3-dihexadecylimidazolium chloride, as well as plasticizers, such as ortho-nitrophenyloctyl ether and diethyl sebacate, on the electrochemical characteristics of membranes were studied. For the electrode containing 2% of the phenoxy-substituted boron subphthalocyanine in dobutamine and salicylate solutions, the slopes of the electrode function were 36 ± 1 mV/dec and–46 ± 3 mV/dec and the limits of detection (LODs) were 4 × 10^–5 M and 3 × 10^–4 M, respectively. The addition of an ionic liquid containing the diphenylbutylethylphosphonium cation and the bis(triflyl)imide and hexaflurophosphate anions to the membrane composition had no effect on the response of membrane electrodes to both dobutamine and salicylate. The use of phenoxy-substituted boron subphthalocyanine in an amount of 2% and the TPhBNa additive significantly improved sensor characteristics: the slope of the electrode function (S) for the dobutamine-selective electrode was (54 ± 1) mV/dec and LOD was 1 × 10^–5 M. Dobutamine can be determined in the presence of dopamine, adrenalin, and glucose. Electrodes based on 2% phenoxy-substituted boron subphthalocyanine and 0.5% (C₁₆H₃₃)₂ImCl, or TBGDPBr in salicylate solutions demonstrate the slope of the electrode function close to the theoretical one and a low limit of detection: S = (–59 ± 1) mV/dec, LOD = 2 × 10^–5 M and S = (–57 ± 1) mV/dec, LOD = 4 × 10^–5 M, respectively. The anti-Hofmeister selectivity of sensors was observed. The electrode based on phenoxy-substituted boron subphthalocyanine and (C₁₆H₃₃)₂ImCl was used for the assay of acetylsalicylic acid in the drug Cardiomagnyl.     

Calix[4]Arenes in the partial cone conformation as ionophores in silver ion-selective electrodes

Two calix[4]arene derivatives, in the partial cone conformation, with sulfur-containing functionalities, were tested as neutral carrier ionophores in potentiometric silver-selective electrodes of conventional membrane and membrane-coated glassy carbon electrode types. Comparison with a calix[4]arene in the cone conformation was made. The membranes were prepared using either 2-nitrophenyl octyl ether or bis(ethylhexyl)sebacate as plasticizers and potassium tetrakis(p-chlorophenyl)borate as the lipophilic salt in a poly(vinyl chloride) matrix. Both calix[4]arenes yielded electrodes of good sensitivity (approx. 47 mV dec⁻¹) in the range 10⁻⁴–10⁻¹ M and excellent selectivity [log K_Ag,_MH+ < −1.5] of transition, alkali and heavy metal cations, including sodium, mercury(II) and lead(II) cations. Temperature effects and reproducibility of response were determined and the interfering effects of mercury(II) and lead (II) ions on the membranes were noted. The partial cone conformation allows improved selectivity over certain cations relative to calix[4]arenes in the cone conformation.     

Nitrate-containing ionic liquids as active membrane components of nitrate-selection electrodes

Two dialkylimidazolium nitrate ionic liquids (ILs) have been tested for use as an active component of plasticized PVC membranes in nitrate ion selective electrodes (ISEs). The potentiometric reversibility and the main electrochemical characteristics of the ISEs in KNO₃ solutions have been studied. The test membranes contain 5% of the active component and demonstrate a near-Nernstian response to NO ₃ ^? . The use of a more hydrophobic IL based on dioctadecylimidazolium increases the sensitivity and decreases the detection limit: the slope of the electrode function is 57 mV/pC, and C _min = 3.7 · 10^?6 mol/L. The pH range of the membrane performance has been studied, and the potentiometric selectivity to NO ₃ ^? in the presence of several foreign anions has been determined. The new electrode exceeds the commercially available analogue (an ELIT 021 nitrate-selective electrode) in the detection limit and response time. The utility of the new electrode for the direct potentiometric determination of nitrate ILs in aqueous solutions has been demonstrated.     

Membrane-dialyzer injection loop for enhancing the selectivity of anion-responsive liquid-membrane electrodes in flow systems Part 2. A selective sensing system for salicylate

An electrode-based flow-injection system suitable for the direct determination of salicylic acid is described. The system utilizez a tubular polymer membrrane electrode based on manganese(III) tetraphenylporphyrin chloride to sense salicylate ions formed in a recipient buffer solution held within the upper channel of a flow-through membrane dialyzer assembly. Samples containing salicylic acid are manually intoduced into the lower channel of the dialysis unit, in which a thin silicone rubber membrane separates the two channels. The analyte is trapped across the membrane as salicylate ions within a static layer of an appropriate recipient buffer. After a fixed trapping time, the recipient plug is flushed to the electrode in a conventional flow-injection manner. Peak potentials observed are logarithmically related to the salicylic acid concentrations in the original sample. Without the dialysis unit, the electrode response to salicylate is nearly Nernstian over the range 2 × 10^?6?10^?2 M. In the complete flow/dialysis system, near Nernstian response was achieved for 10^?4?10^?2 M salicylate with a 2-min trapping time. Detection limits can be altered by changing the trapping time. Anionic salicylate can be determined by acidifying the sample. The resulting system offers very high selectivity for salicylate (as salicylic acid) over most inorganic and organic anions normally found in blood. Preliminary studies demonstrate the practical application of this system for the determination of salicylate in serum.     

Application of Tetra Cyclohexyl Tin(IV) as an Anionic Carrier for the Construction of a New Salicylate Membrane Sensor

A new tin complex namely tetracyclohexyl tin(IV) (TCHT) was synthesized and used as the ion carrier for the construction of a highly selective salicylate sensor. This sensor shows a Nernstian response to salicylate ions over a very wide concentration (1.0 × 10^?7–1.0 × 10^?1 M) in a pH range of 5.5–10.5. The optimum selectivity and response could be obtained for a membrane incorporating 30% PVC, 61% BA, 3% of cationic additive (HTAB) and 6% of TCHT. The response time of the electrode is very short in the whole concentration range (15 s). The electrode also shows an excellent discriminating ability for salicylate ions with respect to the most common organic and inorganic anions including chloride, sulfate, nitrate, nitrite, cyanide, sulfite, iodide, thiocyanate, phosphate, acetate, oxalate, citrate, and tartarate ions. The detection limit of the proposed sensor is 8.0 × 10^?8 M. The electrode was successfully used for determining the concentration of salicylate ion in synthetic serums.     

Bis (trans-cinnamaldehyde) ethylene diimine dibromonickel (II) complex as a neutral carrier for salicylate-selective liquid membrane and coated graphite sensors

A salicylate PVC-based membrane (SPME) and a coated graphite membrane (SCGE) electrodes by using a new tetracoordinate organonickel complex as ion carrier were prepared. Both sensors show a Nernstian response to salicylate ions over a very wide concentration ranges (1.0×10⁻⁵-1.0×10⁻¹ M for SPME and 1.0×10⁻⁶-1.0×10⁻² M for SCGE) in the pH of 7.0. The best selectivities were obtained for the membrane incorporating 30% PVC, 63% plasticizer, 2% cationic additive and 5% ionophore. The electrodes possess satisfactory reproducibility, very short response time (∼10 s) in the whole concentration ranges, and excellent discriminating ability for salicylate ions with respect to the most common organic and inorganic anions. The detection limits of proposed sensors are 5.0×10⁻⁶ and 7.0×10⁻⁷ M for SPME and SCGE, respectively. The electrodes were successfully used for determination of salicylate in biological samples.     

Evaluation of Ionic Liquids Based on Amino Acid Anions for Use in Liquid‐junction Free Reference Electrodes

In this paper we report on the novel polymeric membranes for the liquid junction‐free reference electrodes. The membranes contain the ionic liquids (ILs) based on the amino acid anions, namely valine‐, leucine‐, lysine‐ and histidine‐anions, and 1‐butyl‐3‐methylimidazolium cation. Addition of the ILs, and especially of the valine‐based one, to the polymeric plasticized membranes allows significant stabilization of the electrode potential and makes it insensitive to the solution composition. A simple criterion based on the calculated lipophilicities of the cation and anion of the IL is proposed for a priori estimation of its applicability for potential stabilization. The addition of the IL as a microcomponent is found to be advantageous over plasticizing the membrane with the IL due to better potential stability, higher dissociation degree and mobility of the species. The resistance of the novel reference membranes can be tuned by addition of the lipophilic membrane electrolytes, e. g. ETH500. The applicability of the developed reference electrodes is verified in the potentiometric calibration of the indicator K⁺‐ and Ca²⁺‐selective electrodes. Implementation of the amino acid‐based ionic liquids with low environmental toxicity can make a significant contribution to the development of nature‐friendly potentiometry.     

Polydiphenylamine-dodecyl sulfate films for the simultaneous amperometric determination of electroinactive anions and cations in ion-exclusion cation-exchange chromatography

An amperometric detector with two working electrodes both modified with polydiphenylamine-dodecyl sulfate (PDPA-DS) was successfully used for the simultaneous determination of electroinactive anions (SO₄ ^2–, Cl^–, NO₃ ^–) and cations (Na⁺, NH₄ ⁺ and K⁺) in single-column ion-exclusion cation-exchange chromatography (IEC-CEC). The PDPA-DS chemical modified electrode (CME) was based on the incorporation of dodecyl sulfate (DS) into PDPA by electropolymerization of diphenylamine in the presence of sodium dodecyl sulfate. The electrochemical responses against the anions and cations at the PDPA-DS CME in differential pulse voltammetry were studied. A set of well-defined peaks of electroinactive anions and cations were obtained. The anions and cations were detected conveniently and reproducibly in a linear concentration range 0.01–5.0 mmol/L and their detection limits were in the range 5–9 μmol/L at a signal-to-noise ratio of 3 (S/N = 3). The proposed method was quick, sensitive and simple and was successfully applied to the analysis of lake water samples. The working electrode was stable over one week period of operation with no evidence of chemical and mechanical deterioration.     

Microbiosensor for Salicylate Based on Modified Carbon Fibre

ABSTRACT

A microbiosensor is proposed for a quick and easy amperometric determination of salicylate. The methodology involves the use of the enzyme salicylate hydroxylase (SH) to convert salicylate to catechol, which is then oxidised at the carbon fibre electrode. The covalent immobilisation of the enzyme onto a carbon fibre electrode via carbodiimide results in an amperometric biosensor with high sensitivity, low detection limit and good stability. The response of the biosensor is linearly proportional to the salicylate concentration between 1.0 10^?7 and 2.0 10^?6 mol L^?1, at an applied potential of 300 mV vs SCE, with a response time of 3.5 s and a detection limit of 3.3 10^?8 mol L^?1. The relative standard deviation for the determination was 4.1% for n=10. The biosensor was applied to determine salicylate in urine and pharmaceutical samples and compared to the reference method with a good correlation.     

A New pH Sensor Based on a Glassy Carbon Electrode Coated with a Co/Al Layered Double Hydroxide

A glassy carbon electrode has been coated by electrodeposition with a thin film of cobalt based layered double hydroxide (LDH) and used as a pH sensor. The developed electrode displays a linear super‐Nernstian response (?76.2±0.6 mV/pH) in the pH range between 2 and 14 and it is particularly suitable to operate in strongly alkaline solution. The reproducibility of the sensor construction is good with a relative standard deviation of the calibration curve slopes of±2.5 % (n=4). The electrode has a response time comparable to that exhibited by commercial glass electrodes in the pH range examined and is not affected by interference from the most common anions and cations.     

Salicylate Ion‐Selective Electrode Based on a Calix[4]arene as Ionophore

A salicylate‐selective electrode based on calix[4]arene derivative was developed and its response characteristics were investigated. The optimum membrane composition was 1 % ionophore, 30 % PVC, 69 % DOS. The electrode exhibited a Nernstian slope of 58.8±0.5 mV/pSal in the range of 1.0×10^?5–1.0×10^?1 M with a detection limit of 4.3×10^?6 M at pH 4.0, 20±1 °C. The potentiometric response of the electrode in the presence of different anions was investigated by the separate solution method. The lifetime was found at least 4 months, and its response time was 5–10 s. It was successfully used for the potentiometric determination of salicylate in pharmaceutical preparations.     

PVC‐Based on Thiopyrilium Derivatives Membrane Electrodes for Determination of Histamine

This study describes novel histamine‐selective electrodes, having their basis on thiopyrilium (TP) derivatives as suitable ionophores. The electrodes were prepared by incorporating the TP derivatives into plasticized poly(vinyl chloride) (PVC) membranes. These electrodes demonstrate high selectivity as far as the histamine response is considered, as compared with many common inorganic anions and other kinds of amino acids. The influence of membrane composition, pH and the effect of lipophilic cationic and anionic additives on the response characteristics of the electrode were investigated. The resulting sensor based on 2,6‐bis(4‐dimethyl amino phenyl)‐4‐phenyl thiopyrilium perchlorate (TP4) responds to histamine in a wide concentration range from 5.0 × 10^?6 to 1.0 × 10^?1 M with a slope of 54.8 ± 0.6 mV decade^?1 and detection limit of 3.0 μ mol L^?1 (～0.3 ppm). The electrode illustrates fast response time and good long‐term stability (more than 2 months). The ability to design histamine‐selective electrodes based on new thiopyrilium derivatives and both to alter selectivity and improve the response characteristics through structural changes to the charged ionophore, has been investigated. The prepared electrode was used for the determination of histamine in a synthetic human serum sample. Consequently, satisfactory recovery results were obtained over a wide concentration range of histamine.     

Aluminum(III) Porphyrins as Ionophores for Fluoride Selective Polymeric Membrane Electrodes

Aluminum(III) porphyrins are examined as potential fluoride selective ionophores in polymeric membrane type ion‐selective electrodes. Membranes formulated with Al(III) tetraphenyl (TPP) or octaethyl (OEP) porphyrins are shown to exhibit enhanced potentiometric selectivity for fluoride over more lipophilic anions, including perchlorate and thiocyanate. However, such membrane electrodes display undesirable super‐Nernstian behavior, with concomitant slow response and recovery times. By employing a sterically hindered Al(III) picket fence porphyrin (PFP) complex as the membrane active species, fully reversible and Nernstian response toward fluoride is achieved. This finding suggests that the super‐Nernstian behavior observed with the nonpicket fence metalloporphyrins is due to the formation of aggregate porphyrin species (likely dimers) within the membrane phase. The steric hindrance of the PFP ligand structure eliminates such chemistry, thus leading to theoretical response slopes toward fluoride. Addition of lipophilic anionic sites into the organic membranes enhances response and selectivity, indicating that the Al(III) porphyrin ionophores function as charged carrier type ionophores. Optimized membranes formulated with Al(III)‐PFP in an o‐nitrophenyloctyl ether plasticized PVC film exhibit fast response to fluoride down to 40 μM, with very high selectivity over SCN^?, ClO₄^?, Cl^?, Br^? and NO₃^? (k^pot<10^?3 for all anions tested). With further refinements in the membrane chemistry, it is anticipated that Al(III) porphyrin‐based membrane electrodes can exhibit potentiometric fluoride response and selectivity that approaches that of the classical solid‐state LaF₃ crystal‐based fluoride sensor.     

Synthesis, transport and ionophore properties of α,ω-diphosphorylated aza podands: III. Liquid ion-selective electrodes based on phosphorylated aza podands

Aza podands having side α-aminomethylphosphine oxide groups were prepared and used as electrode-active agents in liquid membrane ion-selective electrodes. A series of liqiud membrane electrodes sensitive to Cu²⁺ and Hg²⁺ cations were prepared on the basis of N,N-bis[di(n-hexyl)phosphorylmethyl]piperazine. The electrodes containing copper complexes with aza podands as ionophores exhibit anionic function toward lipophilic anions. Potentiometric and argentometric determination of iodide ions was performed with an iodide-selective electrode based on the mercury complex.     

Activity coefficients of electrolytes from the E.M.F. of liquid membrane cells. I. The method—Test measurements on KCl

A new electrochemical cell is described, in which two permselective liquid membranes, one anionic the other cationic, are interposed between the subsidiary electrodes and the solution of the electrolyte under examination By means of this kind of cell it is possible to measure activity coefficients of salts of cations and anions for which reversible electrodes are not available, with great accuracy even at high dilutions never accessible before (down to ≊10⁻⁴ mol-dm⁻³). The cell performance has been tested by measuring the activity coefficients of KCl for which accurate data are available in literature.