Alkenyl Isocyanide Conjugate Additions: A Rapid Route to γ‐Carbolines

Isocyanides are exceptional building blocks, the wide deployment of which in multicomponent and metal‐insertion reactions belies their limited availability. The first conjugate addition/alkylation to alkenyl isocyanides is described, which addresses this deficiency. An array of organolithiums, magnesiates, enolates, and metalated nitriles add conjugately to β‐ and β,β‐disubstituted arylsulfonyl alkenyl isocyanides to rapidly assemble diverse isocyanide scaffolds. The intermediate metalated isocyanides are efficiently trapped with electrophiles to generate substituted isocyanides incorporating contiguous tri‐ and tetra‐substituted centers. The substituted isocyanides are ideally functionalized for elaboration into synthetic targets as illustrated by the three‐step synthesis of γ‐carboline N ‐methyl ingenine B.     

Switch in stereoselectivity caused by the isocyanide structure in the rhodium-catalyzed silylimination of alkynes

The reaction of terminal alkynes with hydrosilanes and tert-alkyl isocyanides in the presence of Rh(4)(CO)(12) gives (Z)-β-silyl-α,β-unsaturated imines in good yields. On the other hand, the use of aryl isocyanides in place of tert-alkyl isocyanides leads to the formation of E isomers.     

α-Metalated Isocyanides in Organic Synthesis. New synthetic methods (6)

α-Alkali-metalated isocyanides, which can be obtained from isocyanides and bases, can be used for nucleophilic introduction of (masked) α-aminoalkyl groups. Intramolecular ring-closure may then follow if a nucleophile combines at the electron sextet of the isocyanide carbon. Treatment of α-alkali-metalated isocyanides with electrophilic agents permits rapid and efficient synthesis of, inter alia, 2- and 3-amino alcohols, straight-chain, branched, and β-functional α-amino acids, olefins, vinyl isocyanides, and of a large number of mainly five-, but also six- and seven-membered aza-, diaza-, oxa-aza-, and thia-aza heterocycles.     

A More Sustainable Isocyanide Synthesis from N-Substituted Formamides Using Phosphorus Oxychloride in the Presence of Triethylamine as Solvent

A simple, green, and highly efficient protocol for the synthesis of isocyanides is described. The reaction involves dehydration of formamides with phosphorus oxychloride in the presence of triethylamine as solvent at 0 °C. The product isocyanides were obtained in high to excellent yields in less than 5 min. The method offers several advantages including increased synthesis speed, relatively mild conditions, and rapid access to large numbers of functionalized isocyanides, excellent purity, increased safety, and minimal reaction waste. The new approach of synthesising dehydrative isocyanides from formamides is significantly more environmentally-friendly than prior methods.     

Synthesis of Heterocycles by Formal Cycloadditions of Isocyanides

Synthetic methodology for the synthesis of heterocycles is of continuous and high interest with applications in materials, catalysis, and medicines. Multicomponent reactions are suitable tools to efficiently generate chemically diverse sets of heterocycles with sufficient structural complexity. Especially isocyanides have proven to be particularly versatile building blocks in these one‐pot processes. Due to their electronic structure, isocyanides are able to act sequentially or simultaneously as a nucleophile and an electrophile. Traditionally, isocyanides are therefore frequently used in multicomponent chemistry. In the recent literature, numerous reactions have been reported that involve formal cycloadditions of isocyanides with conjugated heterodienes. This Focus Review aims at mapping this reactivity and at providing insight into the relationship between the various reported reaction partners and the observed reactivity modes.     

Isocyanides in the synthesis of nitrogen heterocycles

Isocyanides have long proved themselves to be irreplaceable building blocks in modern organic chemistry. The unique features of the isocyano group make isocyanides particularly useful for the synthesis of a number of important classes of nitrogen heterocycles, such as pyrroles, indoles, and quinolines. Several cocyclizations of isocyanides via zwitterions and radical intermediates as well as transition-metal-catalyzed syntheses of different types of heterocycles have recently been developed. Methods starting from isocyanides often have distinct advantages over alternative approaches to the same heterocycles because of their enhanced convergence, the great simplicity of most of the operations with them, and the great variety of isocyanides readily available for use. Isocyanides have also been used in some enantioselective syntheses of chiral heterocyclic compounds, including natural products as well as precursors thereof.     

A novel three-component reaction of allenoates, isocyanides, and carboxylic acids: facile synthesis of highly substituted acryl imide derivatives

A novel synthesis of highly substituted acryl imide derivatives by the three-component reaction of allenoates, isocyanides, and carboxylic acids was reported, and the intramolecular cyclization reaction of allenoic acids with isocyanides was also described.     

Interaction of mono- and diisocyanoazulenes with gold surfaces: first examples of self-assembled monolayer films involving azulenic scaffolds

The formation and properties of a new class of self-assembled monolayers (SAM) of aryl isocyanides and diisocyanides based on the nonbenzenoid azulenic framework have been investigated using FTIR spectroscopy and ellipsometry. Syntheses of several new members of the isocyanoazulene family, a recently established type of aryl isocyanides, are reported as well. The FTIR spectra for the isocyanoazulene derivatives absorbed on the gold surface indicate the terminal upright coordination of every isocyanoazulene molecule studied. In addition, the ellipsometric thicknesses have been measured and are consistent with those calculated for single monolayers of the isocyanides oriented along the surface normal. Unlike SAMs of some benzenoid aryl isocyanides, the nonbenzenoid isocyanoazule-based SAMs proved resistant to oxidation, oligomerization, and isomerization into the corresponding nitriles under ambient conditions, which is an important prerequisite to their future applications.     

A straightforward synthesis of 2-aminobenzothiazoles from Herz compounds

2-Aminobenzothiazoles are readily synthesised from anilines, sulfur monochloride and isocyanides. The key step consists of an iodine-catalysed insertion of isocyanides into the S-S bond of hydrolysed Herz salts, with concomitant extrusion of sulfur monoxide.     

Synthesis of 2,4-diiodoquinolines via the photochemical cyclization of o-alkynylaryl isocyanides with iodine

Upon photoirradiation of o-alkynylaryl isocyanides in the presence of iodine, the intramolecular cyclization of o-alkynylaryl isocyanides proceeds to afford the corresponding 2,4-diiodoquinolines in good yields. 2,4-Diiodoquinolines can be employed in transition metal-catalyzed cross-coupling reactions.     

lsocyanide derivatives of ferrocene. Preparation,complexation and redox properties

Syntheses and properties of 11 isocyanides containing the ferrocene moiety, including 7 chiral compounds, are described. The redox properties and spectroscopic data of some of these isocyanides are discussed together with those of their chromium carbonyl complexes.     

Rare-earth silylamide-catalyzed monocoupling reaction of isocyanides with terminal alkynes

[reaction: see text] Rare-earth silylamides, Ln[N(SiMe3)2]3 (Ln = Y, La, Sm, Yb), serve as good catalysts for monoinsertion of isocyanides into terminal alkynes in the presence of amine additives, leading to 1-aza-1,3-enyens in excellent yields. The reaction is applicable to a diverse set of terminal alkynes with various functionalities such as ethers, acetals, and amino groups. Larger metals (La and Sm) give a better performance than smaller ones (Y and Yb). Using less hindered primary amines and, in contrast, bulky isocyanides is crucial for the coupling reaction; otherwise, competitive oligomerization of the isocyanides occurs predominantly. In the mechanistic study, the rate-determining step of the reaction seems to be the first insertion of the isocyanides into rare-earth alkynides, which is followed by spontaneous protonation with the amine additives.     

Highly selective double chalcogenation of isocyanides with disulfide-diselenide mixed systems

A highly selective method for introducing thio and seleno groups into a variety of isocyanides has been developed based on the elucidation of the relative reactivities of organic dichalcogenides and chalcogen-centered free radicals. When the reactions of aromatic isocyanides (ArNC) with organic disulfides (R'SSR') and diselenides (R'SeSeR') are conducted upon irradiation with a tungsten lamp through Pyrex (hnu>300 nm), simultaneous introduction of both thio and seleno groups into the isocyanides takes place to provide the corresponding thioselenation products (R'S-C(=NAr)-SeR') in good yields with excellent selectivity. In the cases of aliphatic isocyanides (RCN), a novel diselenide-assisted bisthiolation of RNC with diaryl disulfides (Ar'SSAr') proceeds successfully to give the corresponding bisthiolation products (Ar'S-C(=NR)-SAr'), although the same photoirradiated reaction of RNC with diaryl disulfides does not occur in the absence of diselenide. These double chalcogenation reactions are assumed to proceed via the formation of imidoyl radical intermediates by the reaction of isocyanides with relatively reactive thio radicals (compared with seleno radicals). The obtained thioselenation products can be employed as useful precursors for the construction of beta-lactam framework by the formal [2+2] cyclization with ketene equivalents.     

Pd-catalyzed and CsF-promoted reaction of bromoalkynes with isocyanides: regioselective synthesis of substituted 5-iminopyrrolones

The palladium-catalyzed and CsF-promoted annulation reaction of bromoalkynes and isocyanides regioselectively affords a diverse set of 5-iminopyrrolone derivatives. This chemistry presumably proceeds through the bromoacrylamide intermediates, which can be readily prepared from the nucleophilic addition reaction of isocyanides to bromoalkynes in the presence of CsF.     

Silver‐Catalyzed Cross‐Coupling of Isocyanides and Active Methylene Compounds by a Radical Process

Isocyanides are versatile building blocks, and have been extensively exploited in C? H functionalization reactions. However, transition‐metal‐catalyzed direct C? H functionalization reactions with isocyanides suffer from over‐insertion of isocyanides. Reported herein is a radical coupling/isomerization strategy for the cross‐coupling of isocyanides with active methylene compounds through silver‐catalysis. The method solves the over‐insertion issue and affords a variety of otherwise difficult to synthesize β‐aminoenones and tricarbonylmethanes under base‐ and ligand‐free conditions. This report presents a new fundamental C? C bond‐forming reaction of two basic chemicals.     

Phosphoramidate-mediated conversion of carbonyl ligands into isocyanide ligands: a new approach to chiral isocyanide ligands

Metal isocyanides have been used and studied by organometallic chemists for many years and, as a result, they have a rich and interesting chemistry. The nature of metal-free isocyanides and the methods of making isocyanide complexes, however, has resulted in the vast majority of studies to date being performed with structurally simple isocyanides. We report here a new approach to the synthesis of isocyanide ligands that involves the reaction of a metal carbonyl ligand with the anion of a phosphoramidate. As phosphoramidates can be synthesised in one step from amines, our method means that the structural diversity of readily available amines, particularly chiral amines, can now be incorporated into isocyanide ligands.     

Synthesis of imidazoles through the copper-catalyzed cross-cycloaddition between two different isocyanides

The copper-catalyzed reaction between two different isocyanides produces the corresponding heteroaromatization products, imidazoles, in good yields. The reaction proceeds most probably through the activation of the sp3 C-H bond in the isocyanides by a copper catalyst, followed by a [3 + 2] cycloaddition between the cuprioisocyanide intermediates and arylisocyanides.     

Studies on vinyl isocyanides

The vinyl Isocyanides 2,4,6-(CH₃)₃C₆H₂CHCHNC and (CH₃)₃CCHCHNC and the new 1,3-dienyl isocyanide CH₃CHCH(CH₃)-CHCHNC have been prepared from the corresponding aldehydes and methyl isocyanide using a method first developed by Schöllkopf, Stafforst, and Jentsch. ⁵ The new vinyl isocyanides (CH₃)₂CCHNC and CH₃CHC(CH₃)NC have been prepared by the Cu₂O-catalyzed isomerization of the corresponding allyl isocyanides The liquid vinyl isocyanides may be characterized by the formation of solid cis-(RNC)₂Mo(CO)₄ derivatives through reaction with norbornadienetetracarbonylmolybdenum in hexane solution at ambient temperature. Examination of these molybdenum carbonyl complexes by proton and carbon-13 NMR spectroscopy Indicates that the isocyanide carbon atom but not the carbon-carbon double bond of the vinyl 1socyanide ligands is bonded to the molybdenum atom. The proton-decoupled carbon-13 NMR spectra of the vinyl isocyanides, but not their molybdenum carbonyl complexes, indicate coupling of the isocyanide nitrogen to both the isocyanide carbon (¹J(C-N)6 Hz. ) and the vinyl carbon bearing the isocyanide group (¹J(C-N)11-13 Hz. ) leading to 1:1:1 triplets for these resonances. These vinyl carbonyl resonances are used to estimate the cis-trans isomer ratios in vinyl isocyanides of the type RCHCHNC. Such studies suggest that the formation of vinyl isocyanides by the copper(I) catalyzed isomerization of the corresponding allylic isocyanides is more nearly stereospecific than the formation of vinyl isocyanides by the elimination reaction of the Schollkopf/Stafforst/Jentsch synthetic method.     

Phosphine-catalyzed regioselective heteroaromatization between activated alkynes and isocyanides leading to pyrroles

The organophosphine catalyzed reaction of activated alkynes with isocyanides produces the corresponding heteroaromatization products, pyrroles, regioselectively in good yields. The reaction proceeds most probably through the 1,4-addition of the nucleophilic phosphine catalyst to the alkynes, followed by a [3+2] cycloaddition between the resulting alkenyl phosphine intermediates and a carbanion derived from the isocyanides.     

Three-component coupling using arynes and isocyanides: straightforward access to benzo-annulated nitrogen or oxygen heterocycles

A variety of aldehydes, ketones, benzoquinones, or sulfonylimines were found to couple with arynes and isocyanides, giving iminodihydroisobenzofuran or iminoisoindoline derivatives of structural diversity in a straightforward manner. Nucleophilic addition of isocyanides to arynes, a first step of the three-component coupling, was proved to be reversible by the reaction of an unsymmetrical aryne.