Exchange bias behavior of monodisperse Fe3O4/γ-Fe2O3 core/shell nanoparticles

We have carried out systematic studies on well-characterized monodisperse Fe₃O₄/γ-Fe₂O₃ core/shell nanoparticles of 2-30 nm having a very narrow size distribution and possessing a uniquely mono-layer of surface γ-Fe₂O₃. This unique core-shell structure, probably having a disordered magnetic surface state, leads us to three key observations of unusual magnetic properties: i) a very large magnetic exchange anisotropy reaching over 7 × 10⁶ erg/cm³ for the smaller particles, ii) exchange bias behavior in the magnetization data of the core/shell Fe₃O₄/γ-Fe₂O₃ nanoparticles, and iii) the temperature dependence of the coercive field following an unusual exponential behavior.     

Magnetic properties of (Fe, Fe–B)/γ-Fe2O3 core shell nanostructure

Temperature-dependent magnetic properties of a core/shell nanostructure are reported employing magnetometry and electron magnetic resonance (EMR) spectroscopy. Structural characterization of the sample synthesized by NaBH₄ reduction of FeCl₃ was done by x-ray diffraction, TEM and Mössbauer spectroscopy and showed a core/shell nanostructure with a core of diameter D?20 nm consisting of α-Fe and amorphous Fe–B alloy and a shell of 7 nm thickness made up of principally γ-Fe₂O₃. Temperature-dependent EMR studies at 9.28 GHz show a narrow line with g?2.01 superimposed on a broad line with g?2.20. The narrow line assigned to the oxide shell disappears below about 60 K, in agreement with a blocking temperature T_B?30 K measured in SQUID magnetometry. The EMR parameters of the broad EMR line are similar to those reported for α-Fe nanoparticles imbedded in amorphous SiO₂ matrix. The magnitude of the saturation magnetization M_S=70 emu/g of the nanostructure is smaller than that of bulk α-Fe (M_S=220 emu/g) and bulk γ-Fe₂O₃ (M_S=88 emu/g). Size dependence is used to interpret the absence of exchange-bias in the field-cooled sample of the nanostructure.     

Preparation and photocatalytic property of α-Fe2O3 hollow core/shell hierarchical nanostructures

We report the preparation of a novel kind of α-Fe₂O₃ hollow core/shell hierarchical nanostructures self-assembled by nanosheets. A green precursor powder is first prepared using nontoxic and inexpensive FeCl₃ and urea in ethylene glycol by a surfactant-free solvothermal method at 160 °C for 15 h. The α-Fe₂O₃ hollow core/shell hierarchical nanostructures are obtained by the thermal treatment of the green precursor powder. The as-prepared α-Fe₂O₃ hollow core/shell hierarchical nanostructures are porous, and exhibit a good photocatalytic activity for the degradation of phenol. The samples are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).     

Magnetic and microwave absorbing properties of polyaniline/γ-Fe2O3 nanocomposite

The conducting protonated polyaniline (ES)/γ-Fe₂O₃ nanocomposite with the different γ-Fe₂O₃ content were synthesized by in-situ polymerization. Its morphology, microstructure, DC conductivity and magnetic properties of samples were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), four-wire-technique, and vibrating sample magnetometer (VSM), respectively. The microwave absorbing properties of the nanocomposite powders dispersing in wax coating with the coating thickness of 2 mm were investigated using a vector network analyzers in the frequency range of 7–18 GHz. The pure ES has shown the absorption band with a maximum absorption at approximately 16 GHz and a width (defined as frequency difference between points where the absorption is more than 8 dB) of 3.24 GHz, when 10% γ-Fe₂O₃ by weight is incorporated , the width is broadened to 4.13 GHz and some other absorption bands appear in the range of 7–13 GHz. The parameter dielectric loss tan δ_e (=ε″/ε′) in the 7–18 GHz is found to decrease with increasing γ-Fe₂O₃ contents with 10%, 20%, 30%, respectively, but magnetic loss tan δ_m (=μ″/μ′) increases with increasing γ-Fe₂O₃ contents. The results show that moderate content of γ-Fe₂O₃ nanoparticles embedded in protonated polyaniline matrix may create advanced microwave absorption properties due to simultaneous adjusting of dielectric loss and magnetic loss.     

Design of multifunctionalized γ-Fe2O3@SiO2 core–shell nanoparticles for enzymes immobilization

This article deals with the first covalent grafting of an enzyme on twice functionalized γ-Fe₂O₃@SiO₂ core–shell magnetic nanoparticles. First, amino-PEG functionalized nanoparticles were synthesized in order to comply with non-toxic platforms that would be stable in high concentration and would exhibit chemical groups to allow further coupling with biomolecules. This approach produces a colloidal suspension of covalently grafted enzymes that remains stable for months and mimics the enzyme–substrate interactions in solution. Secondly, nanoparticles synthesis and enzyme coupling process were reported and the catalytic properties of bound enzymes were measured and compared with that of the free one. These new materials appear to be useful tools for enzymatic catalysis research and may be extended to other biomolecules. Furthermore, magnetic properties of these materials open the way to separation, purification, and transport under magnetic field.     

γ-Fe2O3中的氢含量

利用热中子透射法测定γ-Fe₂O₃的氢含量。利用差热分析、磁分析以及穆斯堡尔效应研究γ-Fe₂O₃的相变,实验结果表明在γ-Fe₂O₃结构中确实含有一定量的氢,当γ-Fe₂O₃结构中的阳离子空位被H¹⁺,Co²⁺,Si⁴⁺,P⁵⁺等离子占据时,将 关键词：     

Rheological properties of a γ-Fe2O3 paraffin-based ferrofluid

A stable γ-Fe₂O₃ paraffin-based ferrofluid was prepared via high energy milling. The magnetic particles were characterized using X-ray diffraction, dynamic light scattering and vibrating sample magnetometer techniques. The rheological properties of the ferrofluid were studied using a standard rotating rheometer. The magnetoviscous effect and thixotropy in the ferrofluid were studied. The formation and destruction of magnetically induced structures and the interactions of nanoparticles and aggregates are discussed.     

Preparation and photocatalytic properties of hybrid core–shell reusable CoFe2O4–ZnO nanospheres

Magnetically separable and reusable core–shell CoFe₂O₄–ZnO photocatalyst nanospheres were prepared by the hydrothermal synthesis technique using glucose derived carbon nanospheres as the template. The morphology and the phase of core–shell hybrid structure of CoFe₂O₄–ZnO were assessed via TEM, SEM and XRD. The magnetic composite showed high UV photocatalytic activity for the degradation of methylene blue in water. The photocatalytic activity was found to be ZnO shell thickness dependent. Thicker ZnO shells lead to higher rate of photocatalytic activity. Hybrid nanospheres recovered using an external magnetic field demonstrated good repeatability of photocatalytic activity. These results promise the reusability of the hybrid nanospheres for photocatalytic activity.     

包钴型γ-Fe2O3磁粉矫顽力的研究

包钴型γ-Fe₂O₃磁粉分为包钴γ-Fe₂O₃(简记为Co-γ-Fe₂O₃)和包钴包亚铁γ-Fe₂O₃(简记为CoFe-γ-Fe₂O₃)两种,它们的矫顽力可比γ-Fe₂O₃磁粉的提高100至400Oe左右,本工作对这两种磁粉矫顽力增大的原因作了探讨,认为它们矫顽力增大的机制不同:CO-γ-Fe₂O₃矫顽力增大是由于表面包覆一层Co(OH)₂使表面各向异性增大,而CoFe-γ-Fe₂O₃则是由于表面包覆的是钴铁氧体,γ-Fe₂O₃与钴铁氧体之间发生耦合作用,使矫顽力增大。     

Luminescent properties of YVO4:Eu/SiO2 core–shell composite particles

We report an efficient process for preparing monodisperse SiO₂@Y_0.95Eu_0.05VO₄ core–shell phosphors using a simple citrate sol–gel method and without the use of surface-coupling silane agents or large stabilizers. X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and photoluminescence (PL) spectra were used to characterize the resulting SiO₂@Y_0.95Eu_0.05VO₄ core–shell phosphors. The XRD results demonstrate that the Y_0.95Eu_0.05VO₄ particles crystallization on the surface of SiO₂ annealing at 800 °C is perfectly and the crystallinity increases with raising the annealing temperature. The obtained core–shell phosphors have a near perfect spherical shape with narrow size distribution (average size ca. 500 nm and an average thickness of ~50 nm), are not agglomerated, and have a smooth surface. The thickness of the YVO₄:Eu³⁺ shells on the SiO₂ cores could be easily tailored by changing the mass ratio of shell to core (W = [YVO₄]/[SiO₂]) (~50 nm for W = 30%). The Eu³⁺ shows a strong PL luminescence (dominated by ⁵D₀ − ⁷F₂ red emission at 618 nm) under the excitation of 320 nm UV light. The PL intensity of Eu³⁺ increases with increasing the annealing temperature and the values of W.     

Holographic properties of Fe3O4 nanoparticle-doped organic–inorganic hybrid photopolymer

An organic–inorganic hybrid photopolymer doped with sodium-citrate-coated Fe₃O₄ nanoparticles was fabricated. The experimental results showed that the maximum diffraction efficiency could be increased from 69 to 90%, and the maximum refractive index modulation improved from 1.386 × 10⁻³ to 2.083 × 10⁻³. It also found that the volume shrinkage during holographic exposure was noticeably suppressed without affecting the optical quality of the photopolymer.     

Solvothermal synthesis and characterization of α-Fe2O3 nanodiscs and Mn3O4 nanoparticles with 1,10-phenanthroline

α-Fe₂O₃ nanodiscs and Mn₃O₄ nanoparticles have been prepared by the 1,10-phenanthroline as complexing agent in the presence of sodium hydroxide under hydrothermal conditions. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) spectra. The average diameter of α-Fe₂O₃ nanodiscs is of 2 μm. In the case of Mn₃O₄ sample, the Mn₃O₄ crystallites are nanoparticles with an average size of 34 nm. A formation mechanism for the α-Fe₂O₃ and Mn₃O₄ nanomaterials was proposed.     

利用氧化辅助气固法生长高磁性的α-Fe2O3和Fe3O4纳米线

探讨生长α-Fe₂O₃和Fe₃O₄纳米线的一个可控制的合成过程. 在研究中发现,高磁性的α-Fe₂O₃纳米线已经成功地利用氧化辅助气固法结晶生成于Fe_0.5Ni_0.5合金基板上;若基板事先浸泡于草酸溶液中,随草酸浓度的增加,所生长的纳米线晶相会逐转变为Fe₃O₄,当草酸浓度达到0.75 mol/L时,所生长的纳米线几乎全部转变成Fe₃O₄晶相. 此外,实验结果也显示所生长的纳米线长度及直径会随着气固过程中的温度上升而增加,生长密度则会随着气固过程中的流量加大而上升. 此过程所提出的合成程序可在2 h內完成.     

Pressure induced phase transition of nanocrystalline and bulk maghemite (γ-Fe2O3) to hematite (α-Fe2O3)

Phase transition and bulk moduli of bulk and nanocrystalline γ-Fe₂O₃ were studied using synchrotron X-ray diffraction under high pressure. Contrary to most other nanomaterials, nanocrystalline γ-Fe₂O₃ begins to transform into α-Fe₂O₃ at the same pressure as bulk γ-Fe₂O₃, which is caused by a special structure of γ-Fe₂O₃, in which there exist vacancies of crystal. It is believed that phase transition starts from a certain site of vacancy because of the stress concentration at vacancy sites. Compared to bulk material, nanocrystalline γ-Fe₂O₃ has a larger bulk modulus, which is ascribed to the large ratio of surface to volume.     

Magnetic properties of nanosized γ-Fe2O3 and α-(Fe2/3Cr1/3)2O3, prepared by thermal decomposition of heterometallic single-molecular precursor

Thermal decomposition of the trinuclear complex [Fe₂CrO(CH₃COO)₆(H₂O)₃]NO₃ at 300, 400 and 500 °C gave γ-Fe₂O₃ nanoparticles along with amorphous chromium oxide, while decomposition of the same starting compound at 600 and 700 °C led to the formation of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles. Size of γ-Fe₂O₃ nanoparticles, determined by X-ray diffraction, was in the range from 9 to 11 nm and increased with formation temperature growth. Average size of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles was about 40 nm and almost did not depend on the temperature of its formation. γ-Fe₂O₃ nanoparticles possessed superparamagnetic behavior with blocking temperature 180-250 K, saturation magnetization 29-35 emu/g at 5 K, 44-49 emu/g at 300 K and coercivity 400-600 Oe at 5 K. α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles were characterized by low magnetization values (2.7 emu/g at 70 kOe). Such magnetic properties can be caused by non-compensated spins and defects present on the surface of these nanoparticles. The increase of α-(Fe_2/3Cr_1/3)₂O₃ formation temperature led to decrease of magnetization (being compared for the same fields), which may be caused by decrease of the quantity of defects or non-compensated spins (due to decrease of particles' surface).     

Assembly of γ-Fe2O3/polyaniline nanofilms with tuned dipolar interaction

The internal morphology and magnetic properties of layer-by-layer assembled nanofilms of polyaniline (PANI) and maghemite (γ-Fe₂O₃—7.5-nm diameter) were probed with cross-sectional transmission electron microscopy (TEM) and magnetization measurements (magnetic hysteresis loops, magnetization using zero-field cooled/field-cooled protocols, and ac magnetic susceptibility). Additionally, simulations of the as-produced samples were performed to assess both the nanofilm’s morphology and the corresponding magnetic signatures using the cell dynamic system (CDS) approach and Monte Carlo (MC) through the standard Metropolis algorithm, respectively. Fine control of the film thickness and average maghemite particle–particle within this magnetic structure was accomplished by varying the number of bilayers (PANI/γ-Fe₂O₃) deposited onto silicon substrates or through changing the concentration of the maghemite particles suspended within the colloidal dispersion sample used for film fabrication. PANI/γ-Fe₂O₃ nanofilms comprising 5, 10, 25 and 50 deposited bilayers displayed, respectively, blocking temperatures (T _B) of 30, 35, 39 and 40 K and effective energy barriers (ΔE/k _B) of 1.0 × 10³, 2.3 × 10³, 2.8 × 10³ and 2.9 × 10³ K. Simulation of magnetic nanofilms using the CDS model provided the internal morphology to carry on MC simulation of the magnetic properties of the system taking into account the particle–particle dipolar interaction. The simulated (using CDS) surface–surface particle distance of 0.5, 2.5 and 4.5 nm was obtained for nanofilms with thicknesses of 36.0, 33.9 and 27.1 nm, respectively. The simulated (using MC) T _B values were 33.0, 30.2 and 29.5 K for nanofilms with thicknesses of 36.0, 33.9 and 27.1 nm, respectively. We found the experimental (TEM and magnetic measurements) and the simulated data (CDS and MC) in very good agreement, falling within the same range and displaying the same systematic trend. Our findings open up new perspectives for fabrication of magnetic nanofilms with pre-established (simulated) morphology and magnetic properties.     

Influence of hydrothermally modified γ-Al2O3 on the properties of NiMo/γ-Al2O3 catalyst

The influence of hydrothermal modification of γ-Al₂O₃ on the properties of NiMo/γ-Al₂O₃ catalyst was investigated in this paper. The experimental results showed that the use of the modified γ-Al₂O₃ in the preparation of the NiMo/γ-Al₂O₃ catalyst led to the increase of the dispersion of the surface Mo and Ni oxides, favored the formation of the poly-molybdates and promoted the reduction of the active Mo oxides owing to the increase of the surface acidity of the modified γ-Al₂O₃. Therefore, the NiMo/γ-Al₂O₃ catalyst supported on the modified γ-Al₂O₃ exhibited a higher hydrodenitrogenation (HDN) activity than that supported on the untreated γ-Al₂O₃ in the temperature range of 300-340 °C.     

Synthesis and properties of Au-Fe3O4 and Ag-Fe3O4 heterodimeric nanoparticles

Monodisperse Au-Fe 3 O 4 heterodimeric nanoparticles (NPs) were prepared by injecting precursors into a hot reaction solution.The size of Au and Fe 3 O 4 particles can be controlled by changing the injection temperature.UV-Vis spectra show that the surface plasma resonance band of Au-Fe 3 O 4 heterodimeric NPs was evidently red-shifted compared with the resonance band of Au NPs of similar size.The as-prepared heterodimeric Au-Fe 3 O 4 NPs exhibited superparamagnetic properties at room temperature.The Ag-Fe 3 O 4 heterodimeric NPs were also prepared by this synthetic method simply using AgNO 3 as precursor instead of HAuCl 4.It is indicated that the reported method can be readily extended to the synthesis of other noble metal conjugated heterodimeric NPs.     

Co处理的γ-Fe2O3薄膜的界面研究

本文中对CoO与Fe₂O₃的界面进行了研究,结果表明,简单的CoO-γ-Fe₂O₃界面对于磁性能基本无影响。分析表明,“复杂的扩散界面”不大可能象以往认为的那样是矫顽力增长的主要原因。矫顽力的增长可能是由掺Co造成的一种体效应而不是界面效应。 关键词：     

Synthesis of α-Fe2O3 nanobelts and nanoflakes by thermal oxidation and study to their magnetic properties

α-Fe₂O₃ nanobelts and nanoflakes have been successfully synthesized by oxidation of iron-coated ITO glass in air. The X-ray diffraction, Raman spectrum and scanning electron microscopy are carried out to characterize the nanobelts and nanoflakes. The formation mechanism has been presented. Significantly, the magnetic investigations show that the magnetic properties are strongly shape-dependent. The magnetization measurements of belt-like and flake-like α-Fe₂O₃ in perpendicular exhibit ferromagnetic feature with the coercivity (H_c) and saturation magnetization (M_s) of 334.5 Oe and 1.35 emu/g, 239.5 Oe and 0.12 emu/g, respectively. For the parallel, belt-like and flake-like α-Fe₂O₃ also exhibit ferromagnetic feature with the H_c and M_s of 205.5 Oe and 1.44 emu/g, 159.6 Oe and 0.15 emu/g, respectively.