Magnetocaloric effect in high-energy ball-milled Gd5Si2Ge2 and Gd5Si2Ge2/Fe nanopowders

Evolution of structure and magnetocaloric properties in ball-milled Gd₅Si₂Ge₂ and Gd₅Si₂Ge₂/0.1 wt% Fe nanostructured powders were investigated. The high-energy ball-milled powders were composed of very fine grains (70–80 nm). Magnetization decreased with milling time due to decrease in the grain size and randomization of the magnetic moments at the surface. The magnetic entropy change (ΔS_M) was calculated from the isothermal magnetization curves and a maximum value of 0.45 J/kg K was obtained for 32 h milled Gd₅Si₂Ge₂ alloy powder for a magnetic field change of 2 T while it was still low in Fe-contained alloy powders. The thermo-magnetic measurements revealed that the milled powders display distribution of magnetic transitions, which is desirable for practical magnetic refrigerant to cover a wide temperature span.     

Phase analysis and magnetocaloric properties of Zr substituted Gd-Si-Ge alloys

The structure, microstructure, magneto-structural transition and magnetocaloric effect have been investigated in series of (Gd_5−xZr_x)Si₂Ge₂ alloys with 0≤x≥0.20. X-ray powder diffraction analysis revealed the presence of orthorhombic structure for Zr containing alloys at room temperature in contrast to the monoclinic structure observed in the parent Gd₅Si₂Ge₂ alloy. The microstructural studies reveal that, low Zr addition (x≤0.1) resulted in low volume fraction of detrimental Gd₅Si₃-type secondary phase compared to that present in the parent alloy. All the Zr containing alloys have shown the presence of only second order magnetic transition unlike the parent alloy showing both first order structural and second order magnetic transition. A moderate (ΔS)_M value of −5.5 J/kg K was obtained for the x=0.05 alloy at an enhanced operating temperature of 292 K compared to −7.8 J/kg K at 274 K of the parent alloy for an applied field of 2 T. The interesting feature of Zr (x=0.05) containing alloy is the wide operating temperature range of ∼25 K than that of ∼10-12 K for the parent, which resulted in enhanced net refrigerant capacity of 103 J/kg compared to that of 53 J/kg for the parent alloy.     

Effect of Si/Ge ratio on resistivity and thermopower in Gd5SixGe4−x magnetocaloric compounds

The effect of Si/Ge ratio on resistivity and thermopower behavior has been investigated in the magnetocaloric ferromagnetic Gd₅Si_xGe_4−x compounds with x=1.7-2.3. Microstructural studies reveal the presence of Gd₅(Si,Ge)₄-matrix phase (5:4-type) along with traces of secondary phases (5:5 or 5:3-type). The x=1.7 and 2.0 samples display the presence of a first order structural transition from orthorhombic to monoclinic phase followed by a magnetic transition of the monoclinic phase. The alloys with x=2.2 and 2.3 display only magnetic transitions of the orthorhombic phase. A low temperature feature apparent in the AC susceptibility and resistivity data below 100 K reflects an antiferromagnetic transition of secondary phase(s) present in these compounds. The resistivity behavior study correlates with microstructural studies. A large change in thermopower of −8 μV/K was obtained at the magneto-structural transition for the x=2 compound.     

Microstructural changes in Fe-doped Gd5Si2Ge2

Gd₅Si₂Ge₂-based alloys can exhibit a giant magnetocaloric effect (GMCE); this gives them the potential for use in cooling technologies. It has also been reported that a small addition of iron reduces the hysteresis losses in Gd₅Si₂Ge₂-based alloys, thus increasing the net refrigerating capacity. In this investigation, we have been the first to look at the effect on the microstructure and magnetic properties of Gd₅Si₂Ge₂ resulting from a wide range of substitutions of Si by Fe. The macrostructures of the arc-melted buttons revealed some very unusual surface morphologies, and the analytical results revealed a gradual substitution of the Gd₅(Si,Ge,Fe)₄-type phase by a Gd₅(Si,Ge,Fe)₃-type phase and the presence of three grain-boundary phases, two of which contain substantial amounts of iron. The magnetic measurements indicated that larger amounts of iron reduced the hysteresis losses, but at the same time reduced the Curie temperatures to below lower values that would make the material useful in practice.     

Structural, magnetic and magnetocaloric properties of the Gd5Si4−xSbx (x=0.5-3.5) phases

Substitution of Sb for Si in the Gd₅Si₄ phase results in the formation of ternary Gd₅Si_4−xSb_x phases with three different structure types. For x≤0.38 the Gd₅Si₄-type structure (Pnma space group) with all interslab T-T dimers intact exists (T is Si or Si/Sb mixture), in the x=1.21-1.79 region the Sm₅Ge₄-type structure (Pnma) with all interslab dimers broken is found. A further increase in the Sb concentration (x=2.27-3.1) leads to the appearance of the Eu₅As₄-type structure (Cmca) with broken but equivalent interslab T?T bonds. The Gd₅Si_4−xSb_x phases with 1.21≤x≤3.1 undergo ferromagnetic transitions in the temperature range from 164 to 295 K. Magnetocaloric effect in terms of the isothermal entropy change, ΔS, reaches the maximum values of -3.7(4), -4.2(6) and -4.6(7) J/kg K for the Gd₅Si₂Sb₂, Gd₅Si_1.5Sb_2.5 and Gd₅SiSb₃ samples, respectively.     

Magnetocaloric effect of Gd5SixSn4−x Alloys

The crystal structure and magnetocaloric effect of Gd₅Si_xSn_4−x   (with x=2.4$x=2.4$, 2.6 and 2.8) alloys were studied by means of X-ray power diffraction (XRD) and magnetic measurements. From the XRD results, these alloys adopt a Gd₅Si₄-type structure for x=2.8$x=2.8$, Gd₅Si₄-type and Gd₅Si₂Ge₂-type mixed structures for x=2.4$x=2.4$ and 2.6, while some minor phases can also be found. The Curie temperatures of the Gd₅Si_xSn_4−x increases gradually when x increases from 276 K for x=2.4$x=2.4$, to 301.5 K for x=2.8$x=2.8$. Magnetic entropy changes of these alloys at a magnetic field change of 0–1.8 T are 1.88, 2.26 and 1.69 J/kg K for x=2.4$x=2.4$, 2.6 and 2.8, respectively. The temperature-dependent XRD analysis shows that there is no crystallographic transition for these alloys, which can explain their low magnetic entropy changes.     

Giant magnetocaloric effect in the Gd5Ge2.025Si1.925In0.05 compound

The magnetocaloric properties of the Gd 5 Ge 2.025 Si 1.925 In 0.05 compound have been studied by x-ray diffraction,magnetic and heat capacity measurements.Powder x-ray diffraction measurement shows that the compound has a dominant phase of monoclinic Gd5Ge2Si2-type structure and a small quantity of Gd 5(Ge,Si) 3-type phase at room temperature.At about 270 K,this compound shows a first order phase transition.The isothermal magnetic entropy change(△SM) is calculated from the temperature and magnetic field dependences of the magnetization and the temperature dependence of MCE in terms of adiabatic temperature change(△Tad) is calculated from the isothermal magnetic entropy change and the temperature variation in zero-field heat-capacity data.The maximum S M is 13.6 J·kg-1·K-1 and maximum △Tad is 13 K for the magnetic field change of 0-5 T.The Debye temperature(θD) of this compound is 149 K and the value of DOS at the Fermi level is 1.6 states/eV·atom from the low temperature zero-field heat-capacity data.A considerable isothermal magnetic entropy change and adiabatic temperature change under a field change of 0-5 T jointly make the Gd5Ge2.025Si1.925 In 0.05 compound an attractive candidate for a magnetic refrigerant.     

Structure and magnetic entropy change of suck-cast Gd60Co26Al6Ge8 alloy

The Gd₆₀Co₂₆Al₆Ge₈ alloy has been prepared by the copper-mold suck-casting and its phase component has been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS). It is shown that this alloy consists of primary crystalline Gd₅Ge₃ phase and amorphous matrix. The glass transition temperature (T_g) and crystallization temperatures (T_x) occur at 292 and 320 °C, respectively. The maximal magnetic entropy change (ΔS_M) under 0-5 T field is about 7.6 J (kg⁻¹ K⁻¹) at 155 K and the refrigeration capacity (RC) is about 768 J kg⁻¹, which makes Gd₆₀Co₂₆Al₆Ge₈ bulk metallic glass matrix composite a promising candidate for magnetic refrigerant.     

Field and temperature induced colossal strain in Gd5(SixGe1−x)4

Gd₅(Si_xGe_1−x)₄, known for its giant magnetocaloric effect, also exhibits a colossal strain of the order of 10,000 ppm for a single crystal near its coupled first-order magnetic-structural phase transition, which occurs near room temperature for the compositions 0.41≤x≤0.575. Such colossal strain can be utilised for both magnetic sensor and actuator applications. In this study, various measurements have been carried out on strain as a function of magnetic field strength and as a function of temperature on single crystal Gd₅Si₂Ge₂ (x=0.5), and polycrystalline Gd₅Si_1.95Ge_2.05 (x=0.487) and Gd₅Si_2.09Ge_1.91 (x=0.52). Additionally a giant magnetostriction/thermally induced strain of the order of 1800 ppm in polycrystalline Gd₅Si_2.09Ge_1.91 was observed at its first order phase transition on varying temperature using a Peltier cell without the use of bulky equipment such as cryostat or superconducting magnet.     

The effect of different temperature annealing on phase relation of LaFe11.5Si1.5 and the magnetocaloric effects of La0.8Ce0.2Fe11.5−xCoxSi1.5 alloys

The phase relation of LaFe_11.5Si_1.5 alloys annealed at different high-temperature from 1223 K (5 h) to 1673 K (0.5 h) has been studied. The powder X-ray diffraction (XRD) patterns show that large amount of 1:13 phase begins to form in the matrix alloy consisting of α-Fe and LaFeSi phases when the annealing temperature is 1423 K. In the temperature range from 1423  to 1523 K, α-Fe and LaFeSi phases rapidly decrease to form 1:13 phase, and LaFeSi phase is rarely observed in the XRD pattern of LaFe_11.5Si_1.5 alloy annealed at 1523 K. With annealing temperature increasing from 1573  to 1673 K, the LaFeSi phase is detected again in the LaFe_11.5Si_1.5 alloy, and there is La₅Si₃ phase when the annealing temperature reaches 1673 K. There almost is no change in the XRD patterns of LaFe_11.5Si_1.5 alloys annealed at 1523 K for 3-5 h. According to this result, the La_0.8Ce_0.2Fe_11.5−xCo_xSi_1.5 (0≤×≤0.7) alloys are annealed at 1523 K (3 h). The analysis of XRD patterns shows that La_0.8Ce_0.2Fe_11.5xCo_xSi_1.5 alloys consist of the NaZn₁₃-type main phase and α-Fe impurity phase. With the increase of Co content from x=0 to 0.7, the Curie temperature T_C increases from 180 to 266 K. Because the increase of Co content can weaken the itinerant electron metamagnetic transition, the order of the magnetic transition at T_C changes from first to second-order between x=0.3 and 0.5. Although the magnetic entropy change decreases from 34.9 to 6.8 J/kg K with increasing Co concentration at a low magnetic field of 0-2 T, the thermal and magnetic hysteresis loss reduces remarkably, which is very important for the magnetic refrigerant near room temperature.     

Powder metallurgy influences on the magnetic properties of Gd5.09Ge2.03Si1.88 alloy

Magnetic refrigeration is an innovative technology owing to its high-efficiency, low-energy consumption, and environmental friendliness. However, the manufacturing process of the magnetocaloric materials is an obstacle to the effective application of those materials on refrigeration systems. In this work, we present a magnetic characterization of the Gd_5.09Ge_2.03Si_1.88.alloy, analyzing the as-cast bulk and the sintered tablets after some heat treatments. The study of powder metallurgy parameters such as grain size, compacting pressure and sintering process has showed results comparable to the as-cast alloy, which presents ΔS_T=−18 /kg K.     

Magnetic structure of the La3NiGe2-type Tb3NiGe2 and Mn5Si3-type Tb5NixGe3−x (x=0 and 0.3)

We present a neutron powder diffraction investigation of the magnetic structure of La₃NiGe₂-type Tb₃NiGe₂ and Mn₅Si₃-type Tb₅Ni_xGe_3−x (x=0, 0.3) compounds. It is found that below∼135 K Tb₃NiGe₂ exhibits a commensurate b-collinear ferrimagnetic ordering with C_2h′={1, m_z, 1′×2_z, 1′×1?} magnetic point group. The Mn₅Si₃-type Tb₅Ge₃ and Tb₅Ni_0.3Ge_2.7 compounds are found to present a flat spiral type antiferromagnetic ordering at 85 and ≥89 K, respectively. The Ni for Ge substitution is found to decrease the flat spiral ordered magnetic unit cell from a×a×40c of Tb₅Ge₃ (below 40 K) down to a×a×5c for Tb₅Ni_0.3Ge_2.7 (below ∼10 K).     

Magnetocaloric properties of the La0.7Pr0.3Fe13−xSix compounds

Magnetic entropy change ΔS_m, hysteresis loss and refrigerant capacity of NaZn₁₃-type La_0.7Pr_0.3Fe_13−xSi_x (1.5?x?2.0) compounds have been investigated. The Curie temperature T_C increases linearly with the increase of silicon concentration. Although the maximum value of ΔS_m under a field change of 0−5 T decreases from 30.5 to 11.4 J/kg K as x increases from 1.5 to 2.0, the hysteresis loss at T_C reduces remarkably from 89.2 J/kg for x=1.5 to zero for x=2.0 because the increase of Si content can weaken the itinerant electron metamagnetic transition. The effective refrigerant capacity RC_eff is maintained at high values of 362−439 J/kg for a field change of 0−5 T. This implies that a large ΔS_m and a high RC_eff can be achieved simultaneously in the La_0.7Pr_0.3Fe_13−xSi_x compounds.     

Magneto-structural correlations in Pr0.15Gd0.85Mn2Ge2

Magneto-structural correlations in Pr_0.15Gd_0.85Mn₂Ge₂ have been studied by synchrotron diffraction in the temperature range between 11 and 300 K. This compound crystallizes in the ThCr₂Si₂-type structure (space group ). The unit cell parameters a and c were determined by Rietveld refinements as a function of temperature. Anomalies in the temperature dependence of the unit cell parameters a and c, the c/a ratio and the unit cell volume V at about 240 and 140 K, which is close to the magnetic phase transition temperatures, indicate a pronounced magneto-structural correlation. Spontaneous volume change and linear magnetostrictions are derived as a function of temperature.     

Scaling analysis of the magnetocaloric effect in Gd5Si2Ge1.9X0.1 (X=Al, Cu, Ga, Mn, Fe, Co)

The field dependence of the magnetic entropy change has been studied for a series of doped Gd₅Si₂Ge₂ alloys, which possess a magnetic phase transition that is either entirely second order or a combination of primarily second-order mixed to a very minor degree with a first-order transition arising from a magneto-structural phase change. By analyzing the field scaling of the refrigerant capacity as well as of the reference temperatures used for constructing a universal scaling curve, a procedure for estimating the values of the critical exponents for the alloys was developed. For the cases where the transition is entirely second order, the results obtained from this procedure are comparable to the values obtained from the Kouvel–Fisher method. For the case of Fe-doped alloys which partially possess a first-order phase change, the Kouvel–Fisher method is inapplicable. However, their critical exponents determined by our developed procedure can be used to estimate the Curie temperature of the orthorhombic majority phase.     

The influence of gallium on magnetocaloric effect in Gd60Tb40 alloys

The influences of gallium substitution for terbium in Gd₆₀Tb₄₀ on the phase formation, Curie temperature and magnetic entropy change have been investigated. A series of Gd₆₀Tb_40−xGa_x with x=0, 1, 3 and 5 alloys were prepared by arc-melting method. The X-ray diffraction (XRD) analysis reveals that a small amount of Ga substitution for terbium in Gd₆₀Tb₄₀ can form the solid solution (Gd, Tb). The Curie temperature (T_c) increases from 270 K for Gd₆₀Tb₄₀ to 297 K for Gd₆₀Tb₃₇Ga₃, while the maximum magnetic entropy changes ΔS_{M, max} decreases from 5.15 J/K kg for Gd₆₀Tb₄₀ to 3.32 J/K kg for Gd₆₀Tb₃₇Ga₃ with increasing the Ga content.     

Magnetic properties of NdAu2Ge2

Physical properties of NdAu₂Ge₂, crystallising with the tetragonal ThCr₂Si₂-type crystal structure, were investigated by means of magnetic, calorimetric and electrical transport measurements as well as by neutron diffraction. The compound exhibits antiferromagnetic ordering below T_N=4.5 K with a collinear magnetic structure of the AFI-type. The neodymium magnetic moments are parallel to the c-axis and amount to 1.04(4) μ_B at 1.5 K. The observed magnetic behaviour is strongly influenced by crystalline electric field effect.     

Large relative cooling power of Gd52.5Co16.5Al31 magnetic bulk metallic glass

The magnetocaloric effect and thermal stability have been investigated on the new bulk metallic glass (BMG) Gd_52.5Co_16.5Al₃₁ alloy. The extent of supercooled liquid region is 70 K, which is wider than that of any other Gd-Co-Al ternary BMGs. The magnetic entropy change (ΔS_M) and relative cooling power (RCP) of 9.8 J/kg K and 9.1×10² J/kg are obtained, respectively, under a field change of 5 T. The large ΔS_M and RCP values make Gd_52.5Co_16.5Al₃₁ BMG attractive potential candidate for the magnetic refrigeration application.     

Neutron diffraction studies of Tb2Rh3Si5 compound

In this work neutron diffraction studies of Tb₂Rh₃Si₅ compound are reported. The compound crystallizes in the monoclinic crystal structure of Lu₂Co₃Si₅-type. At 1.5 K an antiferromagnetic ordering with a propagation vector k=(1/2;1/2;1/2) was observed. The Tb magnetic moments of 9.8(2) μ_B form a non-collinear magnetic structure. In the vicinity of Néel temperature of 8 K a change of the magnetic ordering is evidenced. The change seems to be connected with phase transition from commensurate to incommensurate sine-wave modulation of the Tb magnetic moments.     

Synchrotron X-ray diffraction and absorption studies of CeM2X2 (M=Cu, Ni and X=Si, Ge) at high pressure

The equations of state of CeCu₂Si₂ and CeCu₂Ge₂ to about 60 GPa, as well as that of CeNi₂Ge₂ to 22 GPa and the valence state of Ce in CeCu₂Ge₂ to 20 GPa have been studied at room temperature in a diamond-anvil cell using synchrotron radiation sources. In each compound, the ambient-pressure phase (tetragonal ThCr₂Si₂-type structure) persisted to the highest pressure studied. The unit cell volumes of CeNi₂Ge₂ at ∼5 GPa and CeCu₂Ge₂ at ∼7 GPa, respectively, approached that of CeCu₂Si₂ taken at ambient pressure. From the equation-of-state data, the bulk modulus was derived to be 112.0±5.1 GPa for CeCu₂Si₂, 125.6±4.3 GPa for CeCu₂Ge₂, and 178.4±14.3 GPa for CeNi₂Ge₂. The valence state of Ce in CeCu₂Ge₂ remained trivalent throughout the pressure range investigated.