A CMOS image sensor to recognize the cardiovascular disease markers troponin I and C-reactive protein

A complementary metal oxide semiconductor (CMOS) image sensor was utilized to detect the interaction of cardiovascular disease markers, troponin I and C-reactive protein. Each marker with its respective antibodies was adsorbed to an indium nanoparticle (InNP)-coated glass substrate. Dielectric layers of antigens and antibodies bound onto and interacted on conducting InNPs. Normal room light passed through these protein-layer-bound substrates and hit the CMOS image sensor surface, and the number of photons was detected and converted into digital form. We tested this approach for real-time monitoring of cardiac disease markers based on photon count, demonstrating its low cost and its capacity to detect antigens with high sensitivity at picogram per milliliter concentration.     

Toward CMOS image sensor based glucose monitoring

Complementary metal oxide semiconductor (CMOS) image sensor is a powerful tool for biosensing applications. In this present study, CMOS image sensor has been exploited for detecting glucose levels by simple photon count variation with high sensitivity. Various concentrations of glucose (100 mg dL(-1) to 1000 mg dL(-1)) were added onto a simple poly-dimethylsiloxane (PDMS) chip and the oxidation of glucose was catalyzed with the aid of an enzymatic reaction. Oxidized glucose produces a brown color with the help of chromogen during enzymatic reaction and the color density varies with the glucose concentration. Photons pass through the PDMS chip with varying color density and hit the sensor surface. Photon count was recognized by CMOS image sensor depending on the color density with respect to the glucose concentration and it was converted into digital form. By correlating the obtained digital results with glucose concentration it is possible to measure a wide range of blood glucose levels with great linearity based on CMOS image sensor and therefore this technique will promote a convenient point-of-care diagnosis.     

Characterization of a Smartphone Camera's Response to Ultraviolet A Radiation

As part of a wider study into the use of smartphones as solar ultraviolet radiation monitors, this article characterizes the ultraviolet A (UVA; 320–400 nm) response of a consumer complementary metal oxide semiconductor (CMOS)‐based smartphone image sensor in a controlled laboratory environment. The CMOS image sensor in the camera possesses inherent sensitivity to UVA, and despite the attenuation due to the lens and neutral density and wavelength‐specific bandpass filters, the measured relative UVA irradiances relative to the incident irradiances range from 0.0065% at 380 nm to 0.0051% at 340 nm. In addition, the sensor demonstrates a predictable response to low‐intensity discrete UVA stimuli that can be modelled using the ratio of recorded digital values to the incident UVA irradiance for a given automatic exposure time, and resulting in measurement errors that are typically less than 5%. Our results support the idea that smartphones can be used for scientific monitoring of UVA radiation.     

Fabrication of paper-based microfluidic sensors by printing

A novel method for the fabrication of paper-based microfluidic diagnostic devices is reported; it consists of selectively hydrophobizing paper using cellulose reactive hydrophobization agents. The hydrophilic–hydrophobic contrast of patterns so created has excellent ability to control capillary penetration of aqueous liquids in paper channels. Incorporating this idea with digital ink jet printing techniques, a new fabrication method of paper-based microfluidic devices is established. Ink jet printing can deliver biomolecules and indicator reagents with precision into the microfluidic patterns to form bio-chemical sensing zones within the device. This method thus allows the complete sensor, i.e. channel patterns and the detecting chemistries, to be fabricated only by two printing steps. This fabrication method can be scaled up and adapted to use high speed, high volume and low cost commercial printing technology. Sensors can be fabricated for specific tests, or they can be made as general devices to perform on-demand quantitative analytical tasks by incorporating the required detection chemistries for the required tasks.     

An ultrasensitive method of real time pH monitoring with complementary metal oxide semiconductor image sensor

CMOS sensors are becoming a powerful tool in the biological and chemical field. In this work, we introduce a new approach on quantifying various pH solutions with a CMOS image sensor. The CMOS image sensor based pH measurement produces high-accuracy analysis, making it a truly portable and user friendly system. pH indicator blended hydrogel matrix was fabricated as a thin film to the accurate color development. A distinct color change of red, green and blue (RGB) develops in the hydrogel film by applying various pH solutions (pH 1–14). The semi-quantitative pH evolution was acquired by visual read out. Further, CMOS image sensor absorbs the RGB color intensity of the film and hue value converted into digital numbers with the aid of an analog-to-digital converter (ADC) to determine the pH ranges of solutions. Chromaticity diagram and Euclidean distance represent the RGB color space and differentiation of pH ranges, respectively. This technique is applicable to sense the various toxic chemicals and chemical vapors by situ sensing. Ultimately, the entire approach can be integrated into smartphone and operable with the user friendly manner.     

Opto-fluidic micro-ring resonator for sensitive label-free viral detection

We have demonstrated sensitive label-free virus detection using the opto-fluidic ring resonator (OFRR) sensor. The OFRR is a novel sensing platform that integrates the microfluidics and photonic sensing technology with a low detection limit and small volume. In our experiment, filamentous bacteriophage M13 was used as a safe model system. Virus samples were flowed through the OFRR whose surface was coated with M13-specific antibodies. We studied the sensor performance by monitoring in real-time the virus and antibody interaction. It is shown that OFRR can detect M13 with high specificity and sensitivity. The detection limit is approximately 2.3 x 10(3) pfu mL(-1) and the detection dynamic range spanned seven orders of magnitude. Theoretical analysis was also carried out to confirm the experimental results. Our study will lead to development of novel OFRR-based, sensitive, rapid, and low-cost micro total analysis devices for virus detection.     

Immunoassay of plasmonic gold‐nanoparticle clusters: Plasmon coupling effects for Parkinson biomarker detection

A simple signal‐on plasmonic optical assay for the detection of the Parkinson biomarker using gold‐nanoparticle clusters (AuNCs) for signal amplification is presented. This approach is based on the improvement of the optical density (OD) change of the plasmonic band of a localized surface plasmon resonance (LSPR) Au nanoparticle (AuNP) sensor interface using Au NCs conjugated antibodies. The amplification results in a 260‐fold improvement in concentration detection, from 1,000 ng/mL (unlabeled antibody) to 3.8 ng/mL (antibody‐conjugated AuNCs). The sensitivity enhancement can be ascribed to the further plasmonic coupling between the antibody‐conjugated AuNCs and the AuNPs on the LSPR interface and the enhanced amount of target molecule bound to the bioassay. This AuNCs‐assisted signal amplification strategy allows for improving the sensitivity of the plasmon‐based bioassays and can be extended to other optical‐based diagnostic technologies. Importantly, the simple detecting procedure and protocol assembly make it competitive with other existing sensing technologies such as ELISA, allowing for practical usage in clinical diagnostics.     

Semiconductor sensor embedded microfluidic chip for protein biomarker detection using a bead-based immunoassay combined with deoxyribonucleic acid strand labeling

Two major issues need to be addressed in applying semiconductor biosensors to detecting proteins in immunoassays. First, the length of the antibody on the sensor surface surpasses the Debye lengths (approximately 1 nm, in normal ionic strength solution), preventing certain specifically bound proteins from being tightly attached to the sensor surface. Therefore, these proteins do not contribute to the sensor’s surface potential change. Second, these proteins carry a small charge and can be easily affected by the pH of the surrounding solution. This study proposes a magnetic bead-based immunoassay using a secondary antibody to label negatively charged DNA fragments for signal amplification. An externally imposed magnetic force attaches the analyte tightly to the sensor surface, thereby effectively solving the problem of the analyte protein’s distance to the sensor surface surpassing the Debye lengths. In addition, a normal ion intensity buffer can be used without dilution for the proposed method. Experiments revealed that the sensitivity can be improved by using a longer DNA fragment for labeling and smaller magnetic beads as solid support for the antibody. By using a 90 base pair DNA label, the signal was 15 times greater than that without labeling. In addition, by using a 120 nm magnetic bead, a minimum detection limit of 12.5 ng mL⁻¹ apolipoprotein A1 can be measured. Furthermore, this study integrates a semiconductor sensor with a microfluidic chip. With the help of microvalves and micromixers in the chip, the length of the mixing step for each immunoassay has been reduced from 1 h to 20 min, and the sample volume has been reduced from 80 μL to 10 μL. In practice, a protein biomarker in a urinary bladder cancer patient’s urine was successfully measured using this technique. This study provides a convenient and effective method to measure protein using a semiconductor sensor.     

压电免疫传感器用于B因子的测定

B因子是一种不耐热的球蛋白,它参与机体的防御,在炎症过程、细胞和组织损伤中均起重要作用.B因子的检测方法常用的有单扩散法、火箭电泳法和溶血法,前者灵敏度不高,重复性差;后两者操作较复杂^[1,2].     

A surface plasmon resonance immunosensor for detecting a dioxin precursor using a gold binding polypeptide

A surface plasmon resonance (SPR) based biosensor was developed for monitoring 2,4-dichlorophenol, a known dioxin precursor, using an indirect competitive immunoassay. The SPR sensor was fabricated by immobilizing a gold-thin layer on the surface of an SPR sensor chip with an anti-(2,4-dichlorophenol) antibody using a gold binding polypeptide (GBP) and protein G. The SPR response based on the antigen-antibody reaction in a flow system was measured by injecting a 2,4-dichlorophenol sample solution into the flow system in which the SPR sensor was located. In a direct immunoassay system using the modified sensor chip, no significant SPR angle shift less than 0.001° was observed when a 25 ppm of 2,4-dichlorophenol solution was injected. In order to improve the sensitivity of the SPR sensor, an indirect competitive immunoassay method was used in conjunction with the SPR sensor system using 2,4-dichlorophenol conjugated with bovine serum albumin (BSA). In the competitive assay, a 350 ppm 2,4-dichlorophenol-BSA conjugate solution containing 2,4-dichlorophenol at various concentrations (10-250 ppb) were injected into the SPR sensor system. The sensitivity of this indirect immunoassay was found to be extremely sensitive, compared to the direct one, and a detection limit of 20 ppb was estimated. Verification that the use of GBP for immobilizing the antibody on the sensor chip enhanced the sensitivity to 2,4-dichlorophenol was obtained by comparing the procedure with another modification, in which BSA was used instead of GBP for immobilizing the antibody on the sensor chip. The affinity constant of 2,4-dichlorophenol and its conjugate to the antibody were estimated form the SPR response.     

Phoxonic crystals—a new platform for chemical and biochemical sensors

A new sensor platform is based on so-called phoxonic crystals. Phoxonic crystals are structures designed for simultaneous control of photon and phonon propagation and interaction. They are characterized by a periodic spatial modulation of the dielectric constant as well as elastic properties on a common wavelength scale. Multiple scattering of photons and phonons results in a band gap where propagation of both waves is prohibited. The existence of photonic and phononic band gaps opens up opportunities for novel devices and functional materials. The usage of defect modes is an advantageous concept for measurement. The defect also acts as point of measurement. We show theoretically that the properties of the defect mode can be tailored to provide very high sensitivity to optical and acoustic properties of matter confined within a defect cavity or surrounding the defect or being adsorbed at the cavity surface. In this paper, we introduce the sensor platform and analyze the key features of the sensor transduction scheme. Experimental investigations using a macroscopic device support the theoretical findings.     

Single on-chip gold nanowires for electrochemical biosensing of glucose

The development of glucose diagnostic devices with low detection limits is of key importance in diabetes-related research. New highly sensitive sensors are required for non-invasive detection of glucose in bodily fluids, other than blood, and an electrochemical sensor based on a single gold nanowire for rapid, reliable and quantitative detection of low glucose concentrations (10 μM-1 mM), is presented in this paper. Single gold nanowire devices are fabricated at silicon chip substrates using a hybrid electron beam-photolithography approach. Critical dimensions of the nanowires are characterised using a combination of scanning electron and atomic force microscopies. Fabricated nanowire devices are characterised by direct electrical probing and cyclic voltammetry to explore functionality. The voltammetric detection of glucose was performed using ferrocene monocarboxylic acid as an oxidising mediator in the presence of glucose oxidase. The biosensor can be applied to the quantification of glucose in the range of 10 μM-100 mM, with an extremely high sensitivity of 7.2 mA mM(-1) cm(-2) and a low detection limit of 3 μM (S/N = 3). The sensor demonstrated high selectivity towards glucose with negligible interference from other oxidizable species including uric acid, ascorbic acid, mannose, fructose, salicylic acid (Aspirin) and acetaminophen (Paracetamol).     

Multi-analyte analysis system using an antibody-based biochip

A multi-analyte detection system using a unique antibody (Ab) biochip is described. The Ab-based biochip, also referred to as the protein biochip, uses a sensor array based on a complementary metal oxide silicon (CMOS) integrated circuit. The Ab-biochip has a sampling platform of four-by-four microarrays of antibodies deposited onto a Nylon membrane substrate. The micro-arrayed antibodies can be interrogated simultaneously or sequentially using the biochip sensing array detector with the use of a diffractive optical element illuminating each antibody spot individually. The usefulness of the Ab biochip is illustrated by the measurements of immunoglobulin G (IgG) used as the model analyte system. The detection limit for Cy5-labeled IgG molecules was 13 pg.     

Autoantibody detection by direct counting of antigen-displayed yeast cells

In this study, we report a new immunoassay platform based on yeast surface display technology for detection of autoantibodies involved in autoimmune diseases, e.g., systemic lupus erythematosus (SLE) and Sj?gren's syndrome (SS). The autoantigens of Ro52/SSA epitope and SmD were chosen to be displayed on the yeast surface with their respective antibodies as the analytes. By using magnetic beads modified with protein G, yeast cells bound with specific target antibody can be captured. The amount of analytes could be determined by counting the number of fluorescent yeast cells captured in a magnetic field. The platform showed promising results in the detection of SLE autoantibodies with high sensitivity and multiplex detection capability over the traditional approaches.     

Voltammetric Immunoassay for the Detection of Protein Biomarkers

A strategy for a fast (ca. 20 min), specific, electrochemical immunoassay for the cardiac biomarker creatine kinase (CK) and the human cytokine interleukin 10 (IL10) has been developed in this paper. The polyaniline modified gold surface formed from electrochemical reduction of diazonium salt supplies a solid substrate to link the activated carboxylic acid groups from the antibodies, which were labelled with ferrocene. The direct electrochemistry of ferrocene allows the analysis of protein markers with good sensitivity. The creatine kinase sensor demonstrates limit of detection of 0.5 pg mL^?1 in a physiological Krebs‐Henseleit solution. The anti‐IL10 antibody retained fluorescence activity after further coupling to ferrocene and covalent immobilization on to a gold electrode, showing a linear detection range for IL‐10 from 0.001 ng mL^?1 to 50 ng mL^?1 in PBS. We attribute the high sensitivity to the well‐controlled modified surface which results in end–on antibodies that can specifically capture the antigen with ease.     

Surface‐Independent and Oriented Immobilization of Antibody via One‐Step Polydopamine/Protein G Coating: Application to Influenza Virus Immunoassay

For the construction of high‐performance biosensor, it is important to interface bioreceptors with the sensor surface densely and in the optimal orientation. Herein, a simple surface modification method that can optimally immobilize antibodies onto various kinds of surfaces is reported. For the surface modification, a mixture of polydopamine (PDA) and protein G was employed. PDA is a representative mussel‐inspired polymer, and protein G is an immunoglobulin‐binding protein that enables an antibody to have an optimal orientation. The surface characteristics of PDA/Protein G mixture‐coated substrates are analyzed and the PDA/protein G ratio is optimized to maximize the antibody binding efficiency. Moreover, the antibody‐immobilized substrates are applied to the detection of influenza viruses with the naked eye, providing a detection limit of 2.9 × 10³ pfu mL^‐1. Importantly, the several substrates (glass, SiO₂, Si, Al₂O₃, polyethylene terephthalate, polyethylene, polypropylene, and paper) can be modified by simple incubation with the mixture of PDA/protein G, and then the anti‐influenza A H1N1 antibodies can be immobilized on the substrates successfully. Regardless of the substrate, the influenza viruses are detectable after the sandwich immunoreaction and silver enhancement procedure. It is anticipated that the developed PDA/protein G coating method will extend the range of applicable materials for biosensing.     

Label-free imaging and biomarker analysis of exosomes with plasmonic scattering microscopy

Exosome analysis is a promising tool for clinical and biological research applications. However, detection and biomarker quantification of exosomes is technically challenging because they are small and highly heterogeneous. Here, we report an optical approach for imaging exosomes and quantifying their protein markers without labels using plasmonic scattering microscopy (PSM). PSM can provide improved spatial resolution and distortion-free image compared to conventional surface plasmon resonance (SPR) microscopy, with the signal-to-noise ratio similar to objective coupled surface plasmon resonance (SPR) microscopy, and millimeter-scale field of view as a prism-coupled SPR system, thus allowing exosome size distribution analysis with high throughput. In addition, PSM retains the high specificity and surface sensitivity of the SPR sensors and thus allows selection of exosomes from extracellular vesicles with antibody-modified sensor surfaces and in situ analyzing binding kinetics between antibody and the surface protein biomarkers on the captured exosomes. Finally, the PSM can be easily constructed on a popular prism-coupled SPR system with commercially available components. Thus, it may provide an economical and powerful tool for clinical exosome analysis and exploration of fundamental issues such as exosome biomarker binding properties.

The scattering imaging scheme permits the conventional prism-based SPR system to analyse single extracellular vesicles and determine the molecular profiles to characterize the exosomes secreted from different cells.     

Time-resolved luminescent lateral flow assay technology

We here report a detection technology that integrates highly sensitive time-resolved luminescence technique into lateral flow assay platform to achieve excellent detection performance with low cost. We have developed very bright, surface-functionalized and mono-dispersed phosphorescent nanoparticles of long lifetime under ambient conditions. The phosphorescent nanoparticles have been used to conjugate with monoclonal antibody for C-reactive protein (CRP), an inflammatory biomarker. Lateral flow immunoassay devices have been developed using the conjugate for highly sensitive detection of CRP. The CRP assay can achieve a detection sensitivity of <0.2 ng mL⁻¹ in serum with a linear response from 0.2 to 200 ng mL⁻¹ CRP. We have also developed a low cost time-resolved luminescence reader for the lateral flow immunoassay (LFIA) devices. The reader does not use expensive band pass filter and still provide very low detection background and high detection sensitivity on solid substrates such as nitrocellulose membranes. The reader can detect less than 2.5 ng phosphorescent particles captured on a nitrocellulose membrane strip with more than three orders of magnitude linear detection dynamic range. The technology should find a number of applications, ranging from clinical diagnostics, detection of chemical and biological warfare agents, to food and environmental monitoring.     

Universal quantum dot-based sandwich-like immunoassay strategy for rapid and ultrasensitive detection of small molecules using portable and reusable optofluidic nano-biosensing platform

A universal sandwich-like immunoassay strategy based on quantum-dots immunoprobe (QD-labeled anti-mouse IgG antibody) was developed for rapid and ultrasensitive detection of small molecules. A portable and reusable optofluidic nano-biosensing platform was applied to investigate the sandwich-like immunoassay mechanism and format of small molecules, as well as the binding kinetics between QD immunoprobe and anti-small molecule antibody. A two-step immunoassay method that involves pre-incubation mixture of different concentration of small molecule and anti-small molecule antibody, and subsequent introduction of QD immunoprobe into the optofluidic cell was conducted for small molecule determination. Compared with the one-step immunoassay method, the two-step immunoassay method can obtain higher fluorescence signal and higher sensitivity index, thus improving the nano-biosensing performance. Based on the proposed strategy, two mode targets, namely, microcystin-LR (MC-LR) and Bisphenol A (BPA) were tested with high sensitivity, rapidity, and ease of use. A higher concentration of small molecules in the sample led to less anti-small molecule antibody bound with antigen-carrier protein conjugate immobilized onto the sensor surface, and less QD immunoprobes bound with anti-small molecule antibody. This phenomenon lowered the fluorescence signal detected by nano-biosensing platform. Under optimal operating conditions, MC-LR and BPA exhibited a limit of detection of 0.003 and 0.04 μg/L, respectively. The LODs were better than those of the indirect competitive immunoassay method for small molecules via Cy5.5-labeled anti-small molecule antibody. The proposed QD-based sandwich-like immunoassay strategy was evaluated in spiked water samples, and showed good recovery, precision and accuracy without complicated sample pretreatments. All these results demonstrate that the new detection strategy could be readily applied to the other trace small molecules in real water samples.     

Oriented surface immobilization of antibodies at the conserved nucleotide binding site for enhanced antigen detection

The conserved nucleotide binding site (NBS), found on the Fab variable domain of all antibody isotypes, remains a not-so-widely known and unutilized site. Here, we describe a UV photo-cross-linking method (UV-NBS) that utilizes the NBS for oriented immobilization of antibodies onto surfaces, such that the antigen binding activity remains unaffected. Indole-3-butyric acid (IBA) has an affinity for the NBS with a K(d) ranging from 1 to 8 μM for different antibody isotypes and can be covalently photo-cross-linked to the antibody at the NBS upon exposure to UV light. Using the UV-NBS method, antibody was successfully immobilized on synthetic surfaces displaying IBA via UV photo-cross-linking at the NBS. An optimal UV exposure of 2 J/cm(2) yielded significant antibody immobilization on the surface with maximal relative antibody activity per immobilized antibody without any detectable damage to antigen binding activity. Comparison of the UV-NBS method with two other commonly used methods, ε-NH(3)(+) conjugation and physical adsorption, demonstrated that the UV-NBS method yields surfaces with significantly enhanced antigen detection efficiency, higher relative antibody activity, and improved antigen detection sensitivity. Taken together, the UV-NBS method provides a practical, site-specific surface immobilization method, with significant implications in the development of a large array of platforms with diverse sensor and diagnostic applications.