A behavior model of a magnetorheological fluid in direct shear mode

A model that considers the mutual interaction between particles and the external field in a magnetorheological (MR) fluid is proposed. The model predicts the magnetization, interaction energy density, and shear stress against an imposed strain along the planar direction under a uniform magnetic field. Using the Lekner summation method, slowly convergent magnetization functions are transformed into rapidly convergent ones. By applying the proposed model to an application suitable for commercial clutches and dampers working in direct shear mode, it is revealed that the mean magnetization vector and the associated functional quantities of the MR fluid behave harmonically with respect to the imposed shear strain.     

Experimental study and CFD simulation of rotational eccentric cylinder in a magnetorheological fluid

In this study, a magnetorheological (MR) fluid is prepared using carbonyl iron filings and low viscosity lubricating oil. The effects of magnetic field and weight percentage of particles on the viscosity of the MR fluid have been measured using a rotational viscometer. The yield stress under an applied magnetic field was also obtained experimentally. In the absence of an applied magnetic field, the MR fluid behaves as a Newtonian fluid. When the magnetic field is applied, the MR fluid behaves like Bingham plastics with a magnetic field dependent yield stress. Afterward, the results compared with those of CFD simulation of two eccentric cylinders in the MR fluid. Results show that the influences of MR effects, caused by the applied magnetic field, on the model characteristics are significant and not negligible. The viscosity is enhanced by increasing of the magnetic field, eccentricity ratio and weight percentage of suspensions. The MR effects and increasing of weight percentage and eccentricity ratio also provide an enhancement in the yield stresses and required total torque for rotation of inner cylinder. Also the simulation results indicate a good representation of the experiment by the model.     

Ultrasonic velocity and amplitude characterization of magnetorheological fluids under magnetic fields

Variations in velocity of sound and amplitude of the signal of a commercial magnetorheological fluid under different magnetic fields are studied experimentally. Different factors such as orientation, uniformity, geometry and intensity of the magnetic field are investigated. An increase in the change of MR fluid acoustical properties is obtained when the magnetic field intensity is risen. In addition, these properties show an opposite behavior when a magnetic field is applied parallel or perpendicular to the ultrasound propagation. Experiments using an electromagnet and permanent magnets as the source of magnetic field are also compared. Properties such as anisotropy in sound velocity and amplitude make these materials interesting regarding applications.     

磁流变液构成的类梯度结构振动传递特性

提出了一种磁流变液构成的类梯度结构,并通过理论建模、数值计算和实验研究了该结构的振动传递特性.磁流变液在磁场作用下具有液固转换的特殊理化性质,而液固转换过程就是磁流变液的振动传递阻抗变化过程.因此,基于磁流变液的这一特性,通过控制磁场,构建了类梯度结构.基于弹性波传递的一维波动方程,建立了垂直入射的弹性波在类梯度结构中传递的波动方程.然后,使用连续介质的离散化方法和传递矩阵法进行求解,得到振级落差的表达式,对其进行数值计算,分析类梯度结构的振级落差随弹性波频率和磁场强度的变化趋势.最后,对类梯度结构的振动传递特性进行了实验研究,分析了磁场强度对类梯度结构振动传递特性的影响.研究结果表明,与均匀场作用的磁流变液相比,类梯度结构对弹性波的衰减效果更好,且该结构具备良好的可调控特性.     

基于链化分析的磁流变液剪切屈服应力模型

基于磁性颗粒在磁场作用下的链化分析和统计分析方法,建立了磁流变液的宏观屈服剪应力的分析模型.模型考虑了磁感应强度、颗粒尺寸、体积分数、剪应变率以及饱和磁化强度等因素,能描述不同剪切应变率下剪切应力的变化及在高应变率下可能出现的剪切稀化效应.分析了不同因素对剪切屈服应力的影响,讨论了提高磁流变液剪切屈服应力的途径.分析表明,该模型的计算结果能较好地描述有关实验现象,并可用于高性能磁流变液的设计分析.     

An anisotropic magnetized viscous fluid cosmological model in general relativity

We investigate the behavior of a magnetic field in a viscous fluid cosmological model where the free gravitational field is of Petrov type D and the coefficient of shear viscosity is proportional to the rate of expansion in the model. Also discussed are the behavior of the model when the magnetic field tends to zero and some other physical properties.     

Yield stress in thin layers of ferrofluids

We present results of theoretical study of quasielastic behavior of ferrofluid filling a thin flat gap, placed into perpendicular magnetic field. When the field exceeds a certain critical magnitude, magnetic particles form dense discrete domains, elongated along the field, and linking the gap boundaries. Due to these bridges between the gap boundaries, the ferrofluid exhibits quasielastic properties with respect to shear strain in the plane of the gap. We estimated the elastic modules as well as the yield stress of the system, depending on magnetic field and concentration of magnetic particles in the ferrofluid. Analysis shows that there are at least two microscopical mechanisms of transition from the elastic to fluid behavior of the ferrofluid. The first one is connected with the loss of the mechanical equilibrium of the domains, slopped, under the shear stress, with respect to applied magnetic field. The second mechanism is connected with breakup of the “bridge” into two separate drops, when the shear strain exceeds some critical magnitude. Estimates show that for real ferrofluids the second mechanism is more probable.     

磁流变技术研究及其在光学加工中的应用

介绍了磁流变技术的基本原理及其应用。利用磁流变液在磁场作用下形成的高剪切应力,可以利用磁场形成可变硬度的磁流变液对光学零件进行可控的抛光加工。美国Rochester大学率先进行了应用磁流变液对光学零件进行抛光方面的研究。磁流变抛光获得的表面具有纳米级表面粗糙度。     

Mitigating kinematic locking in the material point method

The material point method exhibits kinematic locking when traditional linear shape functions are used with a rectangular grid. The locking affects both the strain and the stress fields, which can lead to inaccurate results and nonphysical behavior. This paper presents a new anti-locking approach that mitigates the accumulation of fictitious strains and stresses, significantly improving the kinematic response and the quality of all field variables. The technique relies on the Hu–Washizu multi-field variational principle, with separate approximations for the volumetric and the deviatoric portions of the strain and stress fields. The proposed approach is validated using a series of benchmark examples from both solid and fluid mechanics, demonstrating the broad range of modeling possibilities within the MPM framework when combined with appropriate anti-locking techniques and algorithms.     

磁流变液阻尼器在转子振动控制中的应用

设计了一种转子振动控制用的剪切式磁流变液阻尼器,建立了磁流变液阻尼器－悬臂转子系统的分析模型,理论和实验研究了转子系统的不平衡响应特性。研究表明,随着施加磁场强度的增加,磁流变液阻尼和刚度增大,转子系统的临界振幅明显下降,系统的临界转速也明显提高。通过简单的开关控制,可抑止转子通过临界转速过程中的振动。     

An adaptive beam model and dynamic characteristics of magnetorheological materials

Magnetorheological (MR) materials show variations in their rheological properties when subjected to varying magnetic fields. They have quick time response, in the order of milliseconds, and thus are potentially applicable to structures and devices when a tunable system response is required. When incorporated into an adaptive structural system, they can yield higher variations in the dynamic response of the structure. This study presents a detailed analysis of dynamic characteristics of adaptive beam based on MR materials. The relationship between the magnetic field and the complex shear modulus of MR materials in the pre-yield regime is researched using oscillatory rheometry techniques. A structural dynamic modelling approach is discussed and vibration characteristics of MR adaptive structures are predicted for different magnetic field levels. In addition to the model predictions, actual MR adaptive beam is fabricated and tested. Both studies illustrate the vibration minimization capabilities of the MR adaptive beam at different magnetic field levels.     

Optical relaxation properties of magnetic fluids under externally magnetic fields

The relaxation behavior (including the rising and falling relaxation processes) of the transmitted light after the magnetic fluid thin films under longitudinal and transverse magnetic fields is investigated, respectively. The physical mechanisms of the two different relaxation processes are discussed. The experimental data of the rising and falling relaxation processes are fitted by using two exponential functions to achieve the rising and falling response times. The relationship between the response time and the strength of applied magnetic field, the concentration of magnetic fluid is studied experimentally. The modulation depth of the transmitted light is researched quantificationally and the deepest modulation depth is obtained with Sample 3 (with volume fraction of 5.62%) in our experiments.     

Magnetic field correlations in random flow with strong steady shear

We analyze the magnetic kinematic dynamo in a conducting fluid where a stationary shear flow is accompanied by relatively weak random velocity fluctuations. The diffusionless and diffusion regimes are described. The growth rates of the magnetic field moments are related to the statistical characteristics of the flow describing divergence of the Lagrangian trajectories. The magnetic field correlation functions are examined, and their growth rates and scaling behavior are established. General assertions are illustrated by the explicit solution of a model where the velocity field is short-correlated in time.     

Existence of a Hartmann layer in the peristalsis of Sisko fluid

Analytical solutions for the peristaltic flow of a magneto hydrodynamic(MHD) Sisko fluid in a channel, under the effects of strong and weak magnetic fields, are presented. The governing nonlinear problem, for the strong magnetic field,is solved using the matched asymptotic expansion. The solution for the weak magnetic field is obtained using a regular perturbation method. The main observation is the existence of a Hartman boundary layer for the strong magnetic field at the location of the two plates of the channel. The thickness of the Hartmann boundary layer is determined analytically. The effects of a strong magnetic field and the shear thinning parameter of the Sisko fluid on the velocity profile are presented graphically.     

磁场对水平温度梯度下双层流体热对流的影响

在水平温度梯度下,双层流体交界面的表面张力会出现梯度,驱动热毛细对流运动,造成热剪切层内的扰动.本文数值模拟了不同重力条件下,双层流体内的对流现象,得出了在微重力时,对流运动将引起热剪切层内强烈的扰动.为了减弱这种扰动,我们利用磁场对流体的运动进行控制.为此,又对微重力条件下,不同方向应用磁场下的热剪切层内扰动行为进行了数值研究,结果显示,磁场对热剪切层稳定性有促进作用,加入法向的应用磁场最为有效.     

Effect of thickness on magnetic phase coexistence and electrical transport in Nd0.51Sr0.49MnO3 films

We present the impact of the film thickness on the coexistence of various magnetic phases and its link to the magnetoresistance of Nd_0.51Sr_0.49MnO₃ thin films. These epitaxial films are deposited on LaAlO₃ (001) substrates by DC magnetron sputtering. Films with thicknesses of approximately 30 nm are found to be under full compressive strain while those with thicknesses ∼100 nm and beyond exhibit the presence of both strained and relaxed phases, as evidenced from X-ray diffraction studies. Both films exhibit multiple magnetic transitions controlled by strong electron correlations and phase coexistence. These films also display insulator–metal transitions (IMT) and colossal magnetoresistance (CMR) under moderate magnetic fields. Among the two set of films, only the 30-nm films show a weak signature of charge ordering at T≈50 K. Even at temperatures much lower than the IMT, the 30-nm films show huge magnetoresistance (MR) ∼80%. This suggests presence of softened charge-ordered insulating (COI) clusters that are transformed into ferromagnetic metallic (FMM) ones by the external magnetic field. In the 100-nm films, the corresponding MR is suppressed to less than 20%. Our study demonstrates that the softening of the COI phase is induced by the combined effect of the in-plane compressive strain and a slight reduction in Sr concentration.     

Electroseismic waves excited by vertical magnetic dipole in borenole

Acoustic and electromagnetic fields are coupled in a fluid saturated porous medium due to seismoelectric effect. Seismoelectric well logging method has been proposed to detect deep target formation utilizing such effect. Because of uncoupling of SH waves with P-SV waves, a simple and forthright way to get shear waves information is possible, especially for soft or slow formation whose shear wave velocity is lower than the velocity of borehole fluid. We consider the wave fields excited by a vertical magnetic dipole (VMD) source. Two methods are used to simulate, one is the coupled method based on Pride model and the other is the uncoupled method. For two methods, the frequency wavenumber domain representations of the acoustic field and associated seismoelectric field are formulated. The full waveforms of acoustic waves and electromagnetic wave induced SH waves excited by VMD source in the time domain propagation in borehole are simulated and analyzed.     

Vibration analysis of a partially treated multi-layer beam with magnetorheological fluid

Semi-active vibration control based on magnetorheological (MR) materials offers excellent potential for high bandwidth control through rapid variations in the rheological properties of the fluid under varying magnetic field. Such fluids may be conveniently applied to partial or more critical components of a large structure to realize more efficient and compact vibration control mechanism with variable damping. This study investigates the properties and vibration responses of a partially treated multi-layer MR fluid beam. The governing equations of a partially treated multi-layered MR beam are formulated using finite element method and Ritz formulation. The validity of the proposed finite element formulations is demonstrated by comparing the results with those obtained from the Ritz formulation and the experimental measurements. The properties of different configurations of a partially treated MR-fluid beam are evaluated to investigate the influences of the location and length of the MR-fluid for different boundary conditions. The properties in terms of natural frequencies and loss factors corresponding to various modes are evaluated under different magnetic field intensities and compared with those of the fully treated beams. The effect of location of the fluid treatment on deflection mode shapes is also investigated. The forced vibration responses of the various configurations of partially treated MR sandwich beam are also evaluated under harmonic force excitations. The results suggest that the natural frequencies and transverse displacement response of the partially treated MR beams are strongly influenced not only by the intensity of the applied magnetic field, but also by the location and the length of the fluid pocket. The application of partial treatment could also alter the deflection pattern of the beam, particularly the location of the peak deflection.     

Figures of merit of magnetostrictive single crystal iron-gallium alloys for actuator and sensor applications

Energy density, magnetomechanical coupling factor and a dimensionless sensing gage factor of 〈1 0 0〉 oriented single crystal iron-gallium alloys with 16, 17.5, 19, 24.7 and 29 at% gallium were studied as functions of stress and magnetic field. To estimate these quantities, the samples were characterized under different quasi-static stress and magnetic field conditions. The experimental behavior was modeled using an energy-based non-linear approach. Both the experimental data and the model simulations were used to calculate material parameters such as magnetic permeability, piezo-magnetic strain coefficient (d₃₃), inverse piezo-magnetic coefficient (stress sensitivity, d*₃₃) and Young's modulus in the material. These quantities were used to obtain energy density, magnetomechanical coupling factor and sensing gage factor as functions of magnetomechanical conditions. Maximum energy density of around 3 kJ/m³, magnetomechanical coupling factor higher than 0.75 and sensing gage factor on the order of 10³ were calculated.     

聚苯胺类电流变体的稳态剪切流动分析

对聚苯胺、及聚苯胺／聚丙烯酸盐复合粒子的稳态剪切流动行为进行了综合考察。结果表明,在交流电场下,电流变体的剪切应力和剪切速率的关系符合Bingham流体形为。并对此现象进行了分析,提出用非理想塑性体的新模型来描述交流电场下聚苯胺类电流变体的稳态剪切流动。