Superparamagnetic behavior of La0.67Sr0.33MnO3 nanoparticles prepared via sol-gel method

Magnetic nanoparticles of La_0.67Sr_0.33MnO₃ (LSMO) manganite were prepared by sol-gel method. Phase formation and crystal structure of the synthesized powder were examined by the X-ray diffraction (XRD) using the Rietveld analysis. The mean particle size was determined by the transmission electron microscopy (TEM). Infrared transmission spectroscopy revealed that stretching and bending modes are influenced by calcinations temperature. The temperature dependence of the ac magnetic susceptibility was measured at different frequencies and ac magnetic fields in the selected ranges of 40-1000 Hz and 80-800 A/m, respectively. The temperature dependence of ac susceptibility shows a characteristic maxima corresponding to the blocking temperature near room temperature. The frequency dependence of the blocking temperature is well described by the Vogel-Fulcher law. By fitting the experimental data with this law, the relaxation time τ₀=1.7×10⁻¹² s, characteristic temperature T₀=262±3 K, anisotropy energy E_a/k=684±15 K and effective magnetic anisotropy constant k_eff=2.25×10⁴ erg/cm³ have been obtained. dc Magnetization measurement versus magnetic field shows that some of LSMO nanoparticles are blocked at 293 K. The role of magnetic interparticle interactions on the magnetic behavior is also investigated.     

Green synthesis of soya bean sprouts-mediated superparamagnetic Fe3O4 nanoparticles

Superparamagnetic Fe₃O₄ nanoparticles were first synthesized via soya bean sprouts (SBS) templates under ambient temperature and normal atmosphere. The reaction process was simple, eco-friendly, and convenient to handle. The morphology and crystalline phase of the nanoparticles were determined from scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray diffraction (XRD) spectra. The effect of SBS template on the formation of Fe₃O₄ nanoparticles was investigated using X-ray photoemission spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FT-IR). The results indicate that spherical Fe₃O₄ nanoparticles with an average diameter of 8 nm simultaneously formed on the epidermal surface and the interior stem wall of SBS. The SBS are responsible for size and morphology control during the whole formation of Fe₃O₄ nanoparticles. In addition, the superconducting quantum interference device (SQUID) results indicate the products are superparamagnetic at room temperature, with blocking temperature (T_B) of 150 K and saturation magnetization of 37.1 emu/g.     

Temperature dependence of magnetic anisotropy constant in cobalt ferrite nanoparticles

The temperature dependence of the effective magnetic anisotropy constant K(T) of CoFe₂O₄ nanoparticles is obtained based on the SQUID magnetometry measurements and Mössbauer spectroscopy. The variation of the blocking temperature T_B as a function of particle radius r is first determined by associating the particle size distribution and the anisotropy energy barrier distribution deduced from the hysteresis curve and the magnetization decay curve, respectively. Finally, the magnetic anisotropy constant at each temperature is calculated from the relation between r and T_B. The resultant effective magnetic anisotropy constant K(T) decreases markedly with increasing temperature from 1.1×10⁷ J/m³ at 5 K to 0.6×10⁵ J/m³ at 280 K. The attempt time τ₀ is also determined to be 6.1×10⁻¹² s which together with the K(T) best explains the temperature dependence of superparamagnetic fraction in Mössbauer spectra.     

Magnetic properties and microstructure of cobalt nanoparticles in a polymer film

Superparamagnetic properties of self-aggregated cobalt nanoparticles in the perfluorinated sulfo-cation membrane (MF-4SK) prepared by ion-exchange method were investigated by transmission electron microscopy (TEM) and superconducting quantum interference device (SQUID) magnetometry at various temperatures. Our experimental results show that cobalt nanoparticles in MF-4SK exhibit superparamagnetic properties above the blocking temperature (T_B), which varies from ∼80 to ∼300 K depending on the cobalt concentration at 100 Oe applied field. The average particle radius of 3.8 nm inferred from Langevin function fit for the concentration of 7.8×10¹⁹ cobalt atoms per 1 g of polymer film is in good agreement with TEM observation. This experimental evidence suggests that cobalt nanoparticles in the polymer film obey a single-domain theory. The results are discussed in the light of current theory for the superparamagnetic behavior of magnetic nanoparticles.     

Magnetic properties of Mn-oxide nanoparticles dispersed in an amorphous SiO2 matrix

Samples of Mn-oxide nanoparticles dispersed in an amorphous SiO₂ matrix with manganese concentration 0.7 and 3 at% have been synthesized by a sol-gel method. Transmission electron microscopy analysis has shown that the samples contain agglomerates of amorphous silica particles 10-20 nm in size. In silica matrix two types of Mn-rich particles are dispersed, smaller nanoparticles with dimensions between 3 and 10 nm, and larger crystalline areas consisting of aggregates of the smaller nanoparticles. High-temperature magnetic susceptibility study reveals that dominant magnetic phase at higher temperatures is λ-MnO₂. At temperatures below T_C=43 K strong ferrimagnetism originating from the minor Mn₃O₄ phase masks the relatively weak magnetism of λ-MnO₂ with antiferromagnetic interactions. Magnetic field dependence of the maximum in the zero-field-cooled magnetization for both the samples in the vicinity of 40 K, and a frequency shift of the real component of the ac magnetic susceptibility in the sample with 3 at% Mn suggest that the magnetic moments of the smaller Mn₃O₄ nanoparticles with dimensions below 10 nm are exposed to thermally activated blocking process just below the Curie temperature T_C. Appearance of a maximum in the zero-field-cooled magnetization for both the samples below 10 K indicates possible spin glass freezing of the magnetic moments at low temperatures which might occur in the geometrically frustrated Mn sublattice of the λ-MnO₂ crystal structure.     

Effects of pressure and temperature on the isothermal bulk modulus of CaO

Molecular dynamics (MD) simulations have been performed to investigate the effects of pressure and temperature on the isothermal bulk modulus of CaO using pair-wise interactions that include polarization effects through the shell model (SM). The dependence of isothermal bulk modulus B_T of CaO on the compression ratio V/V₀ and pressure P have been obtained from MD runs at T=300 K, and compared with the available experimental data and other theoretical results. A good agreement between theory and experiment is obtained. Meanwhile, B_T dependence on temperature T at zero pressure is investigated. At extended pressure and temperature ranges, SM-MD method has also been carried out for predicting the P-V-T equation of state and isothermal bulk modulus at different temperatures along the isotherms 0, 1000, 2000, 3000, and 4000 K, and at different pressures along the isobars 5, 15, 30, 40, and 50 GPa for CaO, respectively.     

Magnetic properties of CdSb doped with Ni

Magnetic properties of the group II–V semiconductor CdSb single crystals doped with Ni (2 at%) are investigated. Deviation of the zero-field-cooled susceptibility, χ_ZFC, from the field-cooled susceptibility is observed below 300 K, along with a broad maximum of χ_ZFC (T) at T_b in fields below the anisotropy field B_K∼4 kG. T_b(B) obeys the law [T_b(B)/T_b(0)]^1/2=1–B/B_K with T_b(0)∼100 K. The magnetization exhibits saturation above ∼20–30 kG, a weak temperature dependence and anisotropy of the saturation value M_s. The coercive field is much smaller then B_K and displays anisotropy inverted with respect to that of M_s. Such magnetic behavior is expected for spheroidal Ni-rich Ni_1−xSb_x nanoparticles with high aspect ratio, broad distribution of the sizes and with orientations of the major axis distributed around a preferred direction.     

Exchange bias in Co nanoparticles embedded in an Mn matrix

Magnetic properties of Co nanoparticles of 1.8 nm diameter embedded in Mn and Ag matrices have been studied as a function of the volume fraction (VFF). While the Co nanoparticles in the Ag matrix show superparamagnetic behavior with T_B=9.5 K (1.5% VFF) and T_B=18.5 K (8.9% VFF), the Co nanoparticles in the antiferromagnetic Mn matrix show a transition peak at ∼65 K in the ZFC/FC susceptibility measurements, and an increase of the coercive fields at low temperature with respect to the Ag matrix. Exchange bias due to the interface exchange coupling between Co particles and the antiferromagnetic Mn matrix has also been studied. The exchange bias field (H_eb), observed for all Co/Mn samples below 40 K, decreases with decreasing volume fraction and with increasing temperature and depends on the field of cooling (H_fc). Exchange bias is accompanied by an increase of coercivity.     

Fabrication and magnetic properties of Fe3O4 nanowire arrays in different diameters

Fe₃O₄ nanowire arrays with different diameters of D=50, 100, 150 and 200 nm were prepared in anodic aluminum oxide (AAO) templates by an electrodeposition method followed by heat-treating processes. A vibrating sample magnetometer (VSM) and a Quantum Design SQUID MPMS magnetometer were used to investigate the magnetic properties. At room temperature the nanowire arrays change from superparamagnetism to ferromagnetism as the diameter increases from 50 to 200 nm. The zero-field-cooled (ZFC) and field-cooled (FC) magnetization measurements show that the blocking temperature T_B increases with the diameter of nanowire. The ZFC curves of D=50 nm nanowire arrays under different applied fields (H) were measured and a power relationship between T_B and H were found. The temperature dependence of coercivity below T_B was also investigated. Mössbauer spectra and micromagnetic simulation were used to study the micro-magnetic structure of nanowire arrays and the static distribution of magnetic moments of D=200 nm nanowire arrays was investigated. The unique magnetic behaviors were interpreted by the competition of the demagnetization energy of quasi-one-dimensional nanostructures and the magnetocrystalline anisotropy energy of particles in nanowires.     

A novel approach for the synthesis of superparamagnetic Mn3O4 nanocrystals by ultrasonic bath

In this study, the synthesis of Mn₃O₄ (husmannite) nanoparticles was carried out in two different alkali media under sonication by ultrasonic bath and conventional method. Manganese acetate was used as precursor, sodium hydroxide and hexamethylenetetramine (HMT) as basic reagents in this synthesis. An ultrasonic bath with low intensity was used for the preparation of nanomaterials. The as prepared samples were characterized with X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (HRTEM, TEM), energy-dispersive spectrum (EDS), and superconducting quantum interference device (SQUID) analysis. The XRD patterns exhibit the nanocrystals are in pure tetragonal phase. The chemical composition was obtained by EDS analysis and confirmed the presence of Mn and O in the sample. According to the TEM and HRTEM results, both nanorods and nanoparticles of Mn₃O₄ were obtained in the presence of ultrasonic irradiation. The average size of nanoparticles was 10 nm, and the size of nanorods was 12 nm in diameter and 100-900 nm in length for the samples prepared in basic medium with sodium hydroxide. In the conventional method with the same basic medium, the nanorod was not observed and the nearly cubic nanoparticles was appeared with an average size of 2.5 nm. The selected area electron diffraction (SAED) patterns revealed that the nanocrystals are polycrystalline in nature. When HMT was used as a basic reagent in the presence of ultrasonic irradiation, it was led to a higher size of nanoparticles and nanorods than when sodium hydroxide was used as a basic reagent. The average size of nanoparticles was about 15 nm and its shape was nearly cubic. The diameter for nanorods was 50 nm and the length was about a few micrometers.The magnetic measurements were carried out on the sample prepared in sodium hydroxide under ultrasonic irradiation. These measurements as a function of temperature and field strength showed a reduction in ferrimagnetic temperature (T_c = 40 K) as compared to those reported for the bulk (T_c = 43 K). The superparamagnetic behavior was observed at room temperature with no saturation magnetization and hysteresis in the region of measured field strength.     

Synthesis and magnetic characterization of nickel ferrite nanoparticles prepared by co-precipitation route

Magnetic nanoparticles of nickel ferrite (NiFe₂O₄) have been synthesized by co-precipitation route using stable ferric and nickel salts with sodium hydroxide as the precipitating agent and oleic acid as the surfactant. X-ray diffraction (XRD) and transmission electron microscope (TEM) analyses confirmed the formation of single-phase nickel ferrite nanoparticles in the range 8-28 nm depending upon the annealing temperature of the samples during the synthesis. The size of the particles (d) was observed to be increasing linearly with annealing temperature of the sample while the coercivity with particle size goes through a maximum, peaking at ∼11 nm and then decreases for larger particles. Typical blocking effects were observed below ∼225 K for all the prepared samples. The superparamagnetic blocking temperature (T_B) was found to be increasing with increasing particle size that has been attributed to the increased effective anisotropy energy of the nanoparticles. The saturation moment of all the samples was found much below the bulk value of nickel ferrite that has been attributed to the disordered surface spins or dead/inert layer in these nanoparticles.     

Electron hopping mechanism in hematite (α-Fe2O3)

The frequency dependence of the real (?′) and imaginary (?″) parts of the dielectric constant of polycrystalline hematite (α-Fe₂O₃) has been investigated in the frequency range 0-100 kHz and the temperature range 190-350 K, in order to reveal experimentally the electron hopping mechanism that takes place during the Morin transition of spin-flip process. The dielectric behaviour is described well by the Debye-type relaxation (α-dispersion) in the temperature regions T<233 K and T>338 K. In the intermediate temperature range 233 K<T<338 K a charge carrier mechanism takes place (electron jump from the O²⁻ ion into one of the magnetic ions Fe³⁺) which gives rise to the low frequency conductivity and to the Ω-dispersion. The temperature dependence of relaxation time (τ) in the −ln τ vs 10³/T plot shows two linear regions. In the first, T<238 K, τ increases with increasing T implying a negative activation energy −0.01 eV, and in the second region T>318 K τ decreases as the temperature increases implying a positive activation energy 0.12 eV. The total reorganization energy (0.12-0.01) 0.11 eV is in agreement with the adiabatic activation energy 0.11 eV given by an ab initio model in the literature. The temperature dependence of the phase shift in the frequencies 1, 5, 10 kHz applied shows clearly an average Morin temperature T_Mo=284±1 K that is higher than the value of 263 K corresponding to a single crystal due to the size and shape of material grains.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

Synthesis of magnetic hollow silica using polystyrene bead as a template

In this paper, we report a new route to synthesize novel magnetic hollow silica nanospheres (MHSNs) using polystyrene particles as sacrificial templates, and TEOS and Fe₃O₄ as precursors. TEM, EDS, XRD, and SQUID were applied to characterize MHSNs. TEM and EDS results show that the MHSNs consist of about 200 nm of hollow cores and ∼35 nm shells with ∼10 nm of Fe₃O₄ nanoparticles embedded. The polystyrene beads were successfully removed by immersing the as-prepared silica nanocomposite in a toluene solution. XRD results demonstrate that the Fe₃O₄ magnetic nanoparticles still keep spinel structure even heated at low temperature. The surface status of the polystyrene beads and Fe₃O₄ nanoparticles has an important effect on the formation of the MHSNs. The MHSNs present a superparamagnetism at room temperature by SQUID measurement. The MHSNs have potential applications in biosystem and nanomedicine.     

Formation of precipitates in heavily boron doped 4H-SiC

Secondary ion mass spectrometry (SIMS) and transmission electron microscopy (TEM) are utilized to study precipitation and the solubility of B in 4H-SiC epitaxial layers super saturated with B. Heat treatments are performed in Ar atmosphere in an rf-heated furnace at temperatures between 1700 and 2000 °C. SIMS ion images, and TEM micrographs reveal the formation of two types of precipitates where the larger, more thermally stable one is suggested to be B₄C. The boron solubility is determined from SIMS depth profiles and is shown to follow the Arrhenius expression: 7.1 × 10²² exp(−1.4 eV/k_BT) cm⁻³ over the studied temperature range.     

Spin-glass-like behaviour and magnetic order in Mn[Cr0.5Ga1.5]S4 spinels

Magnetization and susceptibility were investigated as a function of temperature and magnetic field in polycrystalline Mn[Cr_0.5Ga_1.5]S₄ spinel. The dc susceptibility measurements at 919 Oe showed a disordered ferrimagnetic behaviour with a Curie-Weiss temperature θ_CW=−55 K and an effective magnetic moment of 5.96 μ_B close to the spin-only value of 6.52 μ_B for Cr³⁺ and Mn²⁺ ions in the 3d³ and 3d⁵ configurations, respectively. The magnetization measured at 100 Oe revealed the multiple magnetic transitions with a sharp maximum at the Néel temperature T_N=3.9 K, a minimum at the Yafet-Kittel temperature T_YK=5 K, a broad maximum at the freezing temperature T_f=7.9 K, and an inflection point at the Curie temperature T_C=48 K indicating a transition to paramagnetic phase. A large splitting between the zero-field-cooled (ZFC) and field-cooled (FC) magnetizations at a temperature smaller than T_C suggests the presence of spin-glass-like behaviour. This behaviour is considered in a framework of competing interactions between the antiferromagnetic ordering of the A(Mn) sublattice and the ferromagnetic ordering of the B(Cr) sublattice.     

Epitaxial LSMO films grown on MgO single crystalline substrates

The manganite La_0.67Sr_0.33MnO₃ (LSMO) layers are deposited on single crystal MgO(0 0 1) substrates using a magnetron dc sputtering. The crystalline perfection of the layers, both the as-prepared and the annealed, are characterized by X-ray diffraction technique, rocking curve measurements, Rutherford backscattering spectroscopy (RBS) and transmission electron microscopy (TEM). TEM analyses give evidence of the epitaxial growth of the annealed LSMO with a nanocrystalline surface layer. The temperature dependence of resistance in the 77-340 K range is measured by a standard four-probe technique. While the as-prepared film does not show any transition from paramagnetic to ferromagnetic state, the film annealed in oxygen shows steep R(T) dependence with a peak at 330 K and maximal slope (dR/dT) at 290 K where the maximal sensitivity is 3% K⁻¹.     

Manganese-doped CdGeAs2, ZnGeAs2 and ZnSiAs2 chalcopyrites: A new materials for spintronics

Based on Mn-doped chalcopyrites CdGeAs₂, ZnGeAs₂ and ZnSiAs₂ the new dilute magnetic semiconductors with p-type conductivity were produced. Magnetization, electrical resistivity, magnetoresistance and Hall effect of mentioned compositions were studied. Their curves of temperature dependence of magnetization have the similar form in spite of complicated character, for which the concentration and mobility of the charge carriers are responsible. Thus, for T<15 K, these curves are characteristic for superparamagnetics and for T>15 K for a frustrated ferromagnetics. In compounds with Zn these two states dilute by spinglass-like state. This specific feature is assigned to an attraction of Mn ions occupying neighboring sites and to the competition between the carrier-mediated exchange and superexchange interactions. Curie temperatures of these compounds are above room temperature. These are the highest Curie temperatures in the A^IIB^IVC^V₂:Mn systems.     

Magnetic properties of iron nanoparticles in a polymer film

We systematically synthesized self-aggregated iron nanoparticles in the perfluorinated sulfo-cation membrane (MF-4SK) by ion-exchange method. Our experimental results show that iron nanoparticles in MF-4SK exhibit superparamagnetic properties above the blocking temperature. Field-cooled and zero-field-cooled magnetization data show the blocking temperature, T_B≅120 K for the iron concentration of 5×10¹⁹ atoms per 1 g of polymer film at 500 Oe applied field. This result is well matched with the calculation based on the temperature dependence of the coercivity, which shows T_B≅110 K, with the zero temperature coercivity (H_C0) ≅ 420 Oe. The radius of the typical iron particle is determined to be ∼2 nm from transmission electron microscopy (TEM), showing good agreement with the value acquired by Langevin function fit. These experimental evidences suggest that iron nanoparticles in the polymer film obey a single-domain theory.     

Giant magnetoresistance in Co–Al2O3 granular films prepared by self-organized growth

Co–Al₂O₃ granular films with a narrow distribution in cluster size of Co clusters embedded in Al₂O₃ matrix were prepared by sequential deposition based on self-organized growth. Resistivity dependence of giant magnetoresistance (GMR) was studied. The GMR takes a maximum of 5.2% at room temperature and 9.4% at 13 K and 5700 Gs when the resistivity of the sample is 4×10⁵–7×10⁵ μΩ cm. The temperature dependence of resistivities and GMR were discussed especially. A temperature dependence of conductance ρ∼exp[T₁/(T+T₀)] was found, which indicates the dominant conduction mechanism is fluctuation-induced tunneling. A linear relationship of GMR versus T was observed, GMR=a–kT, in applied magnetic field 5700 Gs. The remarkable character of temperature dependence of GMR should be due to the special microstructure that the clusters are monodispersed in the films.