Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

Effect of glycine on the surface activity and micellar properties of <Emphasis Type="Italic">N</Emphasis>-decanoyl-<Emphasis Type="Italic">N</Emphasis>-methylglucamide

Surface activity, micelle formation and structure of N-decanoyl-N-methylglucamide in presence of increasing glycine concentrations have been investigated. Changes in the critical micelle concentration of the surfactant with the addition of the amino acid were examined by both surface tension and pyrene 1:3 ratio methods. The observed reduction in the critical micelle concentration was attributed to the structure making action of the additive. Micelle structure parameters were obtained as a function of the glycine concentration by using light scattering and fluorescence-quenching measurements. As regard to the effect of glycine of the micelle size, it was found that both the hydrodynamic radius and the micellar aggregation number increased with the glycine concentration. However, the observed micellar growth seems to be mainly determined by the increase in the aggregation number rather than by changes in the amount of water specifically associated to the micelle. This fact is also supported by the observed trend in the micellar partial specific volume as estimated by complementary density measurements.     

Kinetics and mechanism of stripping of Pu(IV) by <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylhydroxylamine using a Lewis cell

The kinetics of back-extraction of Pu(IV) from 30% Tri-Butyl-Phosphate/Odourless Kerosene (TBP/OK) into a nitric acid solution containing N,N-dimethylhydroxylamine (DMHAN) have been investigated using a Lewis cell. The different parameters affecting the back-extraction rate of Pu(IV) such as plutonium, nitric acid, DMHAN concentration in addition to temperature, stirring speed were separately studied and a rate equation was deduced. The activation energy of this process is 28.4 kJ/mol.     

Grafting of poly-<Emphasis Type="Italic">N</Emphasis>-methacryloylaminodeoxyglucose on poly-<Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A graft copolymer simulating glycoprotein was prepared by reaction of poly-N-methacryloylaminodeoxyglucose containing terminal amino group with a copolymer of N-vinylpyrrolidone and acrylic acid N-hydroxysuccinimide ester.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 8, 2004, pp. 1356–1359.Original Russian Text Copyright © 2004 by Nazarova, Pavlov, Kever, Afanaseva, Panarin.     

Functionalyzed polyampholytes on the basis of copolymers of <Emphasis Type="Italic">N,N</Emphasis>-diallyl-<Emphasis Type="Italic">N,N</Emphasis>-dimethylammonium chloride and maleic acid

Polyampholytes were prepared by radical copolymerization of N,N-diallyl-N,N-dimethylammonium chloride and maleic acid. The esterification and subsequent hydrazinolysis permitted to introduce hydrazide groups capable of formation of the coordination bond with copper ions. The formation of complex between the hydrazide groups of polyampholyte and Cu²⁺ ions was established by electronic spectroscopy. It was shown that the coordination of two hydrazide groups in the complex was hampered because of the polymeric nature of the ligand. It is shown that the created functionalized polyampholytes exhibit fungiostatic activity. The highest inhibiting effect on the growth of the pathogenic fungus Fusarium oxysporum is observed for complexes of the hydrazide-containing polyampholytes with Cu²⁺ ions.     

Mass-spectra and molecular structure of <Emphasis Type="Italic">O</Emphasis>-alkyl <Emphasis Type="Italic">N,N</Emphasis>-dialkylamidocyanophosphates

The electron impact mass spectra were recorded and the key directions of fragmentation of the highly toxic O-alkyl N,N-dialkylamidocyanophosphates were identified. The sets of characteristic ions for the 10 subgroups of the main group of this class were determined. Based on the values of the mass numbers and peak intensities of characteristic ions generalized spectral images for each of the 10 studied subgroups of this class were simulated. A new method of group identification of O-alkyl N,N-dialkylamidocyanophosphates was developed.     

Copolymer of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride with maleic acid as drug carrier

A copolymer of N,N-diallyl-N,N-dimethylammonium chloride with maleic acid of constant composition was prepared under the conditions of radical initiation. The possibility of the functionalization of the copolymer with drugs containing amino groups by polymer-analogous transformations was examined. Conditions were found for preparing conjugates of the copolymer with isoniazid. The structures and the quantitative compositions of the conjugates were determined by ¹³С NMR spectroscopy, and the possibility of preparing conjugates with controlled drug content was demonstrated.     

Synthesis of amino acid conjugates of glycyrrhizic acid using <Emphasis Type="Italic">N</Emphasis>-hydroxyphthalimide and <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-dicyclohexylcarbodiimide

Synthesis of amino acid conjugates of glycyrrhizic acid with the use of N-hydroxyphthalimide, N,N'-dicyclohexylcarbodiimide, and tert-butyl esters of L-amino acids (valine, isoleucine, phenylalanine, and methionine) was performed followed by deprotection with trifluoroacetic acid. The target amino acid conjugates were isolated by column chromatography on silica gel in 40–45% yield. The structure of the prepared compounds was confirmed by IR and ¹³C NMR spectroscopy.     

Determination of epoxides by high-performance liquid chromatography following derivatization with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyldithiocarbamate

A reversed-phase, high-performance liquid chromatography (RP-HPLC) method that allows quantitation of low levels of epoxides has been described. The method involved derivatization of epoxides using 100- to 1,000-fold excess N,N-diethyldithiocarbamate (DTC) at 60 °C for 20 min at neutral pH. The unreacted DTC was then decomposed to CS₂ and diethyl amine by acidification of the reaction mixture to pH 2 using orthophosphoric acid. The first two steps could be performed in the same reaction vessel by sequential addition of reagents. In the final step, an aliquot (20 μL) of the derivatized sample was analyzed for the presence of stable esters of DTC by RP-HPLC using a Supelcosil LC-18-S (150 × 4.6-mm) column and a mobile phase consisting of 40% (v/v) acetonitrile in water at a flow of 1 mL min⁻¹. Using UV detection at 278 nm, the epoxides gave linear responses in the concentration range of 0.25 to 50 μM. The method is robust, and as low as 5 pmol of the analyte could be successfully detected and quantified with recoveries of ≥94%. Following a minimal pretreatment such as ultrafiltration (molecular weight cutoff 5,000 Da), the method is suitable for analysis of epoxides in complex physiological fluids (e.g., fetal bovine serum). The method has been rigorously evaluated and adapted in our laboratory for routine analysis and determination of stability of epoxides of 1,3-butadiene and other alkenes added to cell cultures.     

The application of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylhydroxylamine as reductant for the separation of plutonium from uranium

Both single stage and multi-stages experiments on stripping plutonium with N,N-dimethylhydroxylamine (DMHAN) as reductant with methylhydrozine (MMH) as supporting reductant were carried out. The effect of contact time, temperature, acidity, concentration of DMHAN on back-extraction rate of plutonium was investigated in the single stage experiment. The results demonstrated that the reaction of stripping Pu(IV) in the organic phase (30% TBP–kerosene) 1BF solutions by DMHAN exhibits excellent stripping efficiency. Under the given conditions, the back-extraction rate of plutonium reaches 90% within 2 min. Higher temperature, lower acidity and the increased concentration of DMHAN benifit the stripping reaction. The concentration profile of HNO₃, uranium and plutonium were determined in a multi-stages mixer-settler after the steady state of the back-extraction, and the multi-stages results show that the plutonium can be separated effectively from uranium. The recovery of plutonium and uranium reach 99.995% or over 99.99% respectively. The separation factor of U from Pu (SF_Pu/U) is about 2 × 10⁴.     

<Emphasis Type="Italic">Z</Emphasis>-and <Emphasis Type="Italic">E</Emphasis>-conformers of <Emphasis Type="Italic">N</Emphasis>-chloroacetylcytisine

N-Chloroacetylcytisine was synthesized by acylation of (–)-cytisine. Stable Z- and E-conformers with respect to rotational isomerism around the N-12–CO bond were found in PMR spectra at room temperature. The point at which PMR resonances of the Z- and E-conformers coalesced upon heating was measured. The transition barrier between the conformers was estimated.     

Comparative extraction efficiencies of tri-<Emphasis Type="Italic">n</Emphasis>-butyl phosphate and <Emphasis Type="Italic">N,N</Emphasis>-dihexyloctanamide for uranium recovery using supercritical CO<Subscript>2</Subscript>

Extraction of uranium from tissue paper, synthetic soil, and from its oxides (UO₂, UO₃ and U₃O₈) was carried out using supercritical carbon dioxide modified with methanol solutions of extractants such as tri-n-butyl phosphate (TBP) or N,N-dihexyl octanamide (DHOA). The effects of temperature, pressure, extractant/nitric acid (nitrate) concentration, and of hydrogen peroxide on uranium extraction were investigated. The dissolution and extraction of uranium in supercritical CO₂ modified with TBP, from oxide samples followed the order: UO₃ ≫ UO₂ > U₃O₈. Addition of hydrogen peroxide in the modifier solution enhanced the dissolution/extraction of uranium in dynamic mode. DHOA appeared better than TBP for recovery of uranium from different oxide samples. Similar enhancement in uranium extraction was observed in static mode experiments in the presence of hydrogen peroxide. Uranium estimation in the extracted fraction was carried out by spectrophotometry employing 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) as the chromophore.     

Mechanism of nitration of nitrogen-containing heterocyclic <Emphasis Type="Italic">N</Emphasis>-acetonyl derivatives. General approach to the synthesis of <Emphasis Type="Italic">N</Emphasis>-dinitromethylazoles

A general synthetic procedure for the synthesis of N-dinitromethyl derivatives of nitrogen-containing heterocycles has been developed. The procedure includes the destructive nitration of heterocyclic N-acetonyl derivatives of tetrazoles, 1,2,4- and 1,2,3-triazoles, pyrazoles, imidazoles and their bicyclic analogs, as well as imides of carboxylic and sulfonic acids and substituted hydrazines with mixtures of sulfuric and nitric acids. The kinetic study of the reaction mechanism was performed using UV and NMR spectroscopy. It was found that the NO₂ groups were sequentially introduced into the methylene fragment by the addition of the nitronium ion to multiple bonds of intermediate enols followed by hydrolysis of the acetyl moiety. The rate and direction of the enolization (due to the CH₂ and CH₃ groups) of the N-acetonyl compounds in sulfuric acid solutions were determined by the study of the deuterium exchange kinetics. The synthesis of the N-dinitromethyl compounds is complicated by side reactions, such as the decomposition of intermediate α-nitroketone, the nitration of the methyl group in the acetonyl moiety, and the nitration of the dinitromethyl products to trinitromethyl derivatives.     

Thermoresponsive behavior of charged <Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-based hydrogels containing gold nanostructures

We report the synthesis of N-isopropylacrylamide-based hydrogels containing either an anionic (acrylic acid) or cationic ([2-(acryloyloxy)ethyl]trimethylammonium chloride) co-monomer. These hydrogels were cross-linked with a cleaveable (N,N′-cystaminebisacrylamide) and/or inert (N,N′-methylenebisacrylamide) molecule in four combinations. Gold nanostructures were then synthesized within these hydrogel matrices by in situ reduction of a metal ion precursor. The resulting eight nanocomposites and their non-gold-containing (native) analogs were characterized with several analytical methods. UV–visible and infrared spectroscopy revealed differences among the samples based largely on the concentration and identity of cross-linking agent. Equilibrium swelling masses and phase transition behavior point to differences among samples on charge of the hydrogel backbone, cross-linker type, and presence or absence of gold nanostructures. A molecular level explanation for these observations is described.     

Structural features of <Emphasis Type="Italic">N</Emphasis>-acylcytisines

N-Acyl cytisine derivatives were synthesized by acylation with acetic anhydride; benzoyl and o-bromo- and p-nitrobenzoyl chlorides; and crotonyl and cinnamoyl chlorides. The structures of the synthesized compounds were studied using IR, PMR, and x-ray structure analysis (XSA). PMR spectra of the N-acylcytisines in solution typically had two rotational isomers around the N12–CO bond. Conformational analysis was performed using XSA for the position of the acyl group relative to the cytisine core. Bond lengths and angles of the acyl groups involved in the conjugation were analyzed.     

Reactions of 1-nitrocyclohexene with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-binucleophiles

A modification of 1-nitrocyclohexene synthesis is proposed; its reaction with phenylhydrazine and benzoic acid hydrazide is shown to afford monoadducts, and with hydrazine hydrate, bisaduct. With diphenylguanidine occurs heterocyclization to 1-phenyl-2-N-phenylamino-4,5,6,7-tetrahydrobenzimidazole, whose structure is confirmed by the X-ray diffraction data. The analysis performed for this compound of the electron density distribution function in the crystal made it possible to estimate the charge distribution, π-electrons delocalization nature, and the role of N-H…N, C-H…H-C and C-H…C interactions in the formation of the crystal packing.     

Synthesis and properties of <Emphasis Type="Italic">N</Emphasis>-nitro-<Emphasis Type="Italic">O</Emphasis>-(4-nitrophenyl)hydroxylamine

Salts of N-nitro-O-(4-nitrophenyl)hydroxylamine were synthesized by a new method of oxidative nitration, involving the reaction of O-(4-nitrophenyl)hydroxylamine with KNO₂ or NaNO₂ in the presence of PhI(OAc)₂ or PhIO as oxidants. When using Na¹⁵NO₂, the samples containing the nitro group labeled with the ¹⁵N isotope were obtained. Acidification of the appropriate salt gave N-nitro-O-(4-nitrophenyl)hydroxylamine. It is the first N-nitrohydroxylamine isolated in the H-form. Its thermal stability was investigated and the probable mechanism of decomposition was suggested. From a comparison of the ¹⁴N and ¹⁵N NMR spectra of N-nitro-O-(4-nitrophenyl)hydroxylamine with those of its O- and N-methylated derivatives, its equilibrium with the aci-form (N=NOOH) was inferred.     

Kinetics of ruthenium(III) catalyzed and uncatalyzed oxidation of monoethanolamine by <Emphasis Type="Italic">N</Emphasis>-bromosuccinimide

Kinetics of uncatalyzed and ruthenium(III) catalyzed oxidation of monoethanolamine by N-bromosuccinimide (NBS) has been studied in an aqueous acetic acid medium in the presence of sodium acetate and perchloric acid, respectively. In the uncatalyzed oxidation the kinetic orders are: the first order in NBS, a fractional order in the substrate. The rate of the reaction increased with an increase in the sodium acetate concentration and decreased with an increase in the perchloric acid concentration. This indicates that free amine molecules are the reactive species. Addition of halide ions results in a decrease in the kinetic rate, which is noteworthy. Both in absence and presence of a catalyst, a decrease in the dielectric constant of the medium decreases the kinetic rate pointing out that these are dipole—dipole reactions. A relatively higher oxidation state of ruthenium i.e., Ru(V) was found to be the active species in Ru(III) catalyzed reactions. A suitable mechanism consistent with the observations has been proposed and a rate law has been derived to explain the kinetic orders.     

Synthesis and anticancer activities of 1,4-phenylene-bis-<Emphasis Type="Italic">N</Emphasis>-acetyl- and <Emphasis Type="Italic">N</Emphasis>-phenylpyrazoline derivatives

Novel 1,4-phenylene-bis-N-acetyl- (3a–h) and bis-N-phenylpyrazoline derivatives (4a–h) were obtained by addition of hydrazine hydrate and phenylhydrazine to bis-chalcone derivatives (1a–h) in acetic acid and acetic acid/ethanol for 4 and 8 h in reflux conditions, respectively. The structures of the obtained bis-N-acetylpyrazoline and bis-N-phenylpyrazoline derivatives were characterized by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopic methods and elemental analysis. Compounds 3a–h and 4a–h were investigated to evaluate their anticancer activities against C6 (rat brain tumor cells) and HeLa (human uterus carcinoma) in vitro using a dose-dependent assay from 5 to 100 μM with 5-fluorouracil (5-FU) as standard anticancer drug. Compound 3a showed higher cell-selective activity compared with 5-FU against HeLa cells. Compounds 3a–h (except 3d) were shown to have better activities than 5-FU against both cells, particularly at high concentration. Compound 4c showed higher cell-selective activity compared with 5-FU against C6 cells. Compound 3a may be particularly promising as an anticancer drug against HeLa cells.     

Pathways of decomposition of <Emphasis Type="Italic">N</Emphasis>-cyclopropyl <Emphasis Type="Italic">N</Emphasis> nitrosoureas in methanol

Decomposition of a series of N-cyclopropyl-N-nitrosoureas (CNU) in CD₃OD was studied. These decompose much more rapidly than N-methyl-N-nitrosourea, one of the decomposition pathways being denitrosation, which is atypical of alkylnitrosoureas under the reaction conditions used. The nature of substituents in the cyclopropane ring has a great effect on the stability of CNU and the product ratio. In the presence of H₂ SO₄, decomposition occurs much more rapidly. Possible pathways of the formation of the major decomposition products of CNU are proposed based on the experimental data.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 359–370, February, 2005.