Engineering reactions in crystals: suppression of photodecarbonylation by intramolecular β-phenyl quenching

The photochemical reactivity of cis- and trans-2-(p-carboxybenzyl)-2,6-diphenyl-6-vinylcyclohexanone, cis-1 and trans-1, was investigated in solution and in the crystalline solid state. Photochemical decarbonylation in solution proceeded in excellent yields to give cis- and trans-1-(p-carboxybenzyl)-1,2-diphenyl-2-vinylcyclopentanes cis-2 and trans-2 along with 3-(p-carboxybenzyl)-1,3-diphenylcycloheptene 3. Reactions in crystals were suppressed by a stereospecific quenching interaction between the benzyl substituent and the carbonyl oxygen in the crystalline ketone.     

Enantioselective inclusion of (R)-phenylglycyl-(R)-phenylglycine with benzyl methyl sulfoxides

A crystalline dipeptide, (R)-phenylglycyl-(R)-phenylglycine (RR-1), recognized p-halobenzyl methyl sulfoxides with high R-enantioselectivity (86–99% ee) to form inclusion compounds. The single-crystal X-ray analyses showed that RR-1 molecules are arranged in parallel and zigzags via hydrogen bonding to construct a pleated sheet. The guest molecules that form hydrogen bond with ⁺NH₃ of RR-1 are accommodated in the channel cavity between the layers. In contrast to the inclusion crystals of parent benzyl methyl sulfoxide, in which a rectangular cavity is formed, the cavity including p-halobenzyl methyl sulfoxides becomes rhomboidal. We also examine the guest exchange in these inclusion compounds and it was found that the guest exchanges occur when the host structure changes.     

2-(Diethylamino)ethanethiol, a new reagent for the odorless deprotection of aromatic methyl ethers

A new reagent for the deprotection of aromatic methyl ethers, 2-(diethylamino)ethanethiol, is reported. This compound, commercially available as its HCl salt, affords the corresponding phenols in good to excellent yields on a wide variety of substrates. A clear advantage of this method over the use of more common thiols, such as ethanethiol, is the easy extraction of both the deprotecting reagent and the byproduct 2-(diethylamino)ethyl methyl sulfide into the aqueous phase by quenching with dilute acid, which allows an essentially odorless workup.     

Cyclodehydration of diphenyl-trifluoromethyl-carbinols

The halochromic product from di-(p-fluorophenyl) -trifluoromethylcarbinol and sulphuric acid gives with ethyl mercaptan 3-ethylthio-6 fluoro-9-trifluoromethylfluorene. Analogous reactions have been observed with (p-chlorophenyl)-(p-fluorophenyl)-, with (p-fluorophenyl)-phenyl-. and with diphenyl-trifluoromethyl-carbinol.

The infra-red spectra of the fluorene derivatives formed are discussed.     

Attachment of 4-methoxy benzyl units to a tripodal fluoroionophore shows reversal of output functionality with Cu(II) input

Syntheses of three tris-(2-aminoethyl)amine, tren based tripodal fluoroionophores (L₂, L₃, and L₅), are reported. These fluoroionophores are designed based on the fluorophore–spacer–receptor format (choice of fluorophore in all three cases is anthryl unit). In L₂, three anthracene moieties are attached to the three arms of tren via –CH₂-spacer whereas L₃ and L₅ have p-nitro benzyl and p-methoxy benzyl substitutions, respectively, on L₂, which are in close proximity to the photoinduced electron transfer (PET) center. All three fluoroionophores show appreciably lower fluorescence compared to anthracene due to effective PET process in these systems but the quantum yield varies depending upon the nature of substitution at the PET center. In the cases of L₂ and L₅ different amounts of fluorescence recovery are observed in the presence of different cation inputs whereas L₃ is almost inactive toward cation sensing. Detailed fluorescence emission studies on L₂ and L₅ in the presence of different cation inputs showed that L₅ having N4 donor sets bearing three p-methoxy benzyl units attached to the three nitrogen centers involving photoinduced electron transfer process is a viable candidate for enhancement of fluorescence with Cu(II) input. In the absence of p-methoxy benzyl units at the nitrogen centers' resulting system, L₂ shows quenching of fluorescence with the Cu(II) under same experimental conditions.     

Unprecedented cyclisations of calix[4]arenes under the Mitsunobu protocol. Part 3: Thiacalix[4]crowns versus dimers

Intermolecular couplings versus intramolecular ring closures were observed in the reaction of p-tert-butylthiacalix[4]arene and diethylene glycols affording dimers 2 and/or the inherently chiral 1,2-thiacalix[4]crown-3 derivatives 5 under the Mitsunobu protocol. The enantiomeric separation of 5a was achieved by chiral HPLC. The reaction of thiacalix[4]monocrowns 1 with diethylene glycols failed to give crowned thiacalix-tubes 7, instead biscrowns 8 were formed. Partially alkylated double thiacalix[4]arenes 10, 11 were obtained via the base promoted alkylations of a thiacalixarene dimer 2a containing diethyleneoxy linkers.     

Aliphatic thioacetate deprotection using catalytic tetrabutylammonium cyanide

A series of thiol-functionalized organic compounds were selected to analyze the scope and efficiency of a new thioacetate deprotection method using catalytic tetrabutylammonium cyanide (TBACN) to effect the transformation of a thioacetate group to a free thiol in the presence of a protic solvent. Particularly attractive are the mild reaction and workup conditions, reduced byproduct formation typically seen using literature methods and yields of greater than 80% for the free aliphatic thiols. This method is effective on aliphatic thiols with trityl, benzyl, p-halo-benzyl, phenethyl, phenoxyethyl, and cyclohexylethyl structural moieties, but it is not effective with thiophenols.     

Oxidative addition of organic halides to zerovalent palladium complexes containing rigid bidentate nitrogen ligands

Zerovalent complexes of the type Pd(Ar-BIAN)(alkene), i.e. complexes containing the rigid bidentate nitrogen ligands bis(arylimino) acenaphthene (Ar = p-Tol, p-MeOC₆H₄, o-Tol,o,o′-Me₂C₆H₃, o,o′-ⁱPr₂C₆H₃) and an electron-poor alkene have been shown to react with a variety of (organic) halides RX, including methyl, benzyl, aryl, acyl and allylic halides, to give the corresponding square planar divalent Pd(R)X(Ar-BIAN) or [Pd(η³-allyl)(Ar-BIAN)]X complexes. The new complexes obtained have been fully characterized and their fluxional behaviour in solution studied by ¹H NMR spectroscopy. The rate of oxidative addition of iodomethane to Pd(p-Tol-BIAN)(alkene) complexes was found to decrease with increasing Pd-alkene bond strength, i.e. dimethyl fumarate fumaronitrile, but oxidative addition to the fumaronitrile complex was accelerated by irradiation with a mercury lamp. Oxidative addition of allylic ha     

Polymer-assisted solution-phase parallel synthesis of dipeptide p-nitroanilides and dipeptide diphenyl phosphonates

This letter describes the parallel synthesis of dipeptide p-nitroanilides (1) and dipeptide diphenyl phosphonates (2), compounds that can be used as substrates and irreversible inhibitors for the rapid profiling of dipeptidyl peptidases. A polymer-assisted solution-phase synthesis was used for a rapid and clean coupling between easily available building blocks.     

Mn(OAc)3—an efficient oxidant for regeneration of DDQ: deprotection of p-methoxy benzyl ethers

Mn(OAc)₃ has been successfully developed as a new oxidant for the regeneration of DDQ from HDDQ. This DDQ regeneration technique, making use of 3 equiv. of Mn(OAc)₃–DDQ (10 mol%), was applied to the deprotection of p-methoxy benzyl (PMB) ethers.     

Laser-induced fluorescence, dispersed fluorescence and lifetime measurements of jet-cooled chloro-substituted benzyl radicals

We measured the laser-induced fluorescence (LIF) and dispersed fluorescence (DF) spectra of jet-cooled -, o- and m-chlorobenzyl radicals after they were generated by the 193 nm photolysis of the corresponding parent molecules. The vibronically resolved spectra were obtained to analyze their D₁–D₀ transitions. The fluorescence lifetimes of -, o-, m- and p-chlorobenzyls in the zeroth vibrational levels of the D₁ states were measured to estimate the oscillator strengths of a series of benzyl derivatives. It was found that the -substitution is inefficient to break the ‘accidental forbiddenness' of the D₁–D₀ transition of benzyl, while the ring-substitution enhances the oscillator strength by 50%.     

Catalytic selective oxidation of benzyl alcohols to aldehydes with rhenium complexes

The system (ⁿBu₄N)ReO₄ 5/PhIO/CH₂Cl₂, T = 298 K catalyses effectively and with total selectivity the anaerobic oxidation of a range of primary substituted benzyl alcohols (o-, m-, p-X-C₆H₄-CH₂OH, X = H, Me, MeO, Cl, NO₂, CF₃) to the corresponding aldehydes; in contrast, it is unreactive towards secondary benzyl and aliphatic (primary and secondary) alcohols. This may prove of interest in synthetic organic transformations, when several alcoholic functionalities are present in the same molecule.     

Reaction of benzyl chloride with ammonium sulfide under liquid–liquid phase transfer catalysis: Reaction mechanism and kinetics

The reaction between benzyl chloride and aqueous ammonium sulfide was carried out in an organic solvent – toluene, using tetrabutylammonium bromide (TBAB) as phase transfer catalyst (PTC). Two products, namely dibenzyl sulfide (DBS) and benzyl mercaptan (BM), were identified in the reaction mixture. The selectivity of DBS was maximised by changing various parameters such as NH₃/H₂S mole ratio, stirring speed, catalyst loading, concentration of benzyl chloride, volume of aqueous phase, and temperature. The highest selectivity of DBS obtained was about 90% after 445 min of reaction with excess benzyl chloride at 60 °C. Complete conversion of benzyl chloride could be achieved at the cost of very low selectivity of DBS and very high selectivity of BM. The apparent activation energy for the kinetically controlled reaction was found to be 12.3 kcal/mol. From the detailed study of the effects of various parameters on the reaction, a suitable mechanism was established which could explain the course of the reaction.     

The electrochemical characterisation of benzyl mercaptan-modified Au(111): structure and copper deposition

The behaviour of benzyl mercaptan self-assembled monolayers on Au(111) in sulfuric acid solution was studied using cyclic voltammetry and in situ scanning tunnelling microscopy. Modification of the Au(111) surface in an ethanolic solution of benzyl mercaptan leads to a disordered monolayer. However, by partial reductive desorption a striped c (15 x sqrt [3]) and a (2 x sqrt [3]) structure were obtained. The disordered benzyl mercaptan film was also used for the study of copper deposition. At -0.02 V versus SCE, that is in the underpotential deposition region, monoatomic high islands appear on the surface. Bulk deposition of copper starts at -0.08 V versus SCE with the growth of dendrites underneath the thiol film. At higher overpotentials, the growth of three-dimensional copper clusters commences.     

Synthesis and properties of halogen- or methyl-containing poly(diphenylacetylene) membranes

Novel diphenylacetylenes with both trimethylsilyl groups and other substituents (R₂C₆H₃CCC₆H₄-p-SiMe₃, R = m,p-Cl,Cl, m,m-Cl,Cl, m,p-Br,Br, m,m-Br,Br, m,p-Me,Me, m,m-Me,Me, 1a–f, respectively) were polymerized with TaCl₅–n-Bu₄Sn to produce solvent-soluble polymers (2a–f). Most polymers (2a–e) had high molecular weight over 1 × 10⁶, and gave free-standing membranes by the solution casting method. Desilylation of these Si-containing polymer membranes was carried out with trifluoroacetic acid (TFA), which afforded solvent-insoluble desilylated polymer membranes (3a–e). According to thermogravimetric analysis (TGA), both Si-containing and desilylated polymers showed high thermal stability (T₀ ≥ 420 °C). The fractional free volume (FFV) of both Si-containing and desilylated polymer membranes (2a–d, 3a–d) were fairly large (ca. 0.27–0.32), while the FFVs of membranes (2e, 3e) were rather small (0.28 and 0.24). The oxygen permeability coefficients (P_O2) of 2a was as high as 5400 barrers, which is the largest among all the poly(diphenylacetylene) derivatives. Polymers 2b–d also exhibited high oxygen permeability, and their desilylated ones 3b–d retained similar high oxygen permeability. On the other hand, the P_O2 values of 2e and 3e were 1200 and 530 barrers, respectively, which are smaller than those of the halogen-containing polymers (2a–d and 3a–d).     

Regioselective intramolecular bridging of p-tert-butylcalix[7]arene

The first examples of singly bridged calix[7]arenes 2–4 have been obtained by base-promoted direct O-alkylation of p-tert-butylcalix[7]arene with a variety of bis-electrophiles including BrCH₂Cl, oligoethylene glycol ditosylates, and 1,4-bis(bromomethyl)benzene. 1,2-Bridging was favored with ‘short bite’ spanning elements, while the 1,4-isomer predominated with the others (yields up to 72% in the presence of Cs₂CO₃). Assignment of bridging pattern was mainly based on chemical shift of OH groups, in some cases confirmed by 2D NMR experiments. A hampered conformational mobility, depending on the position and nature of the bridge, was observed for compounds 2–4.     

七水合三氯化铈-碘化钠催化氨基苯硫酚与高位阻α, β-不饱和酮的迈克尔加成反应

对七水合三氯化铈-碘化钠(CeCl₃·7H₂O-NaI)化邻氨基苯硫酚、 对氯邻氨基苯硫酚、 间氨基苯硫酚、 对氨基苯硫酚和对甲基苯硫酚与α,β-不饱和酮(1a~1o)的迈克尔加成反应进行了系统研究. 结果表明, CeCl₃·7H₂O-NaI-SiO₂复合催化剂能有效催化邻氨基苯硫酚及对氯邻氨基苯硫酚与α,β-不饱和酮(1a~1o)的迈克尔加成反应. 在优化的反应条件下, 即n(CeCl₃·7H₂O):n(NaI):n(α,β-不饱和酮)=1:2:2, m(CeCl₃·7H₂O):m(SiO₂)=1:1.6, 三氯甲烷作溶剂, 反应温度为回流温度, 反应时间为2 h, 反应可达到中等产率(43.1%~58.8%). 催化剂重复使用4次基本稳定. 此外, 提出了可能的催化机理.     

Comparative study of some synthesised and commercial fluorogenic substrates for horseradish peroxidase and its mimetic enzyme hemin by a flow injection method

Four 3,4-dihydroquinoxalin-2(1H)-one derivatives, i.e., 3,4-dihydroquinoxalin-2(lH)-one (DHQ), 3-methyl-3,4-dihydroquinoxalin-2(1H)-one (MDHQ), 3,4-dihydroquinoxalin-2(1H)-one-6-acid (DHQ-6-A) and 3-methyl-3,4-dihydroquinoxalin-2(1H)-one-6-acid (MDHQ-6-A), and N,N′-dicyanomethyl-o-phenylenediamine (DCM-OPA) were synthesised as potential substrates for horseradish peroxidase (HRP). Of these compounds DCM-OPA, DHQ and MDHQ can be prepared by very simple methods in a pure form in large quantities. Their properties for use as fluorogenic substrates for HRP and its mimetic enzyme hemin were compared with commercially available substrates, i.e., p-hydroxyphenylacetic acid (p-HPA), p-hydroxyphenylpropionic acid (p-HPPA), homovanillic acid (HVA) and tyramine, by a flow injection method. The results showed that DCM-OPA and MDHQ were the best among the five synthesised substrates and p-HPPA and p-HPA are better than HVA and tyramine. Substrates p-HPPA, p-HPA, DCM-OPA and MDHQ showed comparable ability for H₂O₂ detection in HRP and hemin catalysed reaction systems, with detection limits in the nmol l⁻¹ region. The stability of DCM-OPA is better than MDHQ, but both are stable for at least a month in a refrigerator.     

A ring-fission/C–C bond cleavage reaction with an N-alkyl-N-methyl-N-[(5-phenyl-1,2,4-oxadiazol-3-yl)methyl]amine

The reaction of N-(3,4-dichlorophenethyl)-N-methylamine (1) with 3-chloromethyl-5-phenyl-1,2,4-oxadiazole (2) was investigated. Employment of an equimolar amount of 1 and 2 in the presence of potassium carbonate led to the expected tertiary amine 3 (N-[(3,4-dichlorophenyl)ethyl]-N-methyl-N-[(5-phenyl-1,2,4-oxadiazol-3-yl)methyl]amine), whereas an excess of 1 and prolonged reaction time resulted in ring fission of the oxadiazole system in 3 and finally in the formation of N′-benzoyl-N-[(3,4-dichlorophenyl)ethyl]-N-methylguanidine (4) and N,N′-bis[(3,4-dichlorophenyl)ethyl]-N,N′-dimethylmethanediamine (5). The structures of products 3–5 were determined by means of ¹H and ¹³C NMR-spectroscopy, mass spectrometry and IR-spectroscopy, for 3 (as picrate) and 4 also X-ray structure analysis was employed. A possible mechanism of the reaction pathway leading to compounds 4 and 5 is proposed.     

Heterocyclic bioantioxidants. 2. Interaction of 3-nitro-4-substituted coumarins with mercaptans

3-Nitro-4-chlorocoumarin forms 3-nitro-4-substituted coumarins when it reacts with an equimolar quantity of benzyl mercaptan or thiosalicylic acid; with excess benzyl mercaptan, it forms 3,4-di-S-benzyl coumarin. 3-Nitro-4-methoxycoumarin under the same conditions, with an equimolar ratio of reagents, forms a mixture of monosubstituted and disubstituted products. A mechanism is proposed for these reactions.For Communication 1, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1476–1479, November, 1991.