Analysis of the wave configuration resulting from the termination of an inverse Mach reflection

An analytical model for solving the wave configuration which is formed when an inverse Mach reflection terminates after its triple point collides with the reflecting surface has been developed. The predictions of the model were compared with available experimental results and good agreement was obtained.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

A simple physical theory of weak Mach reflection over plane surfaces

It is shown that simple physical principles coupled with the inviscid shock jump relations can be applied to the problem of weak Mach reflection to the extent that the triple point path can be predicted from the incident shock Mach number , gas specific heat ratio and the inclination angle of the reflecting surface to the shock normal. Comparison with the Euler code data and with experiments show close agreement for conditions both far and close to transition and that the general shape of the reflected and Mach stem shocks follow simple curves except in the neighbourhood of the triple point. The conflict at the triple point in matching the flow deflection angles and pressures across the contact discontinuity remains. It is shown however that the simple model presented here gives a close match to the cfd and experimental overall shock and contact surface shapes although it cannot predict these or the flow properties in any detail. Received 10 May 1999 / Accepted 17 December 1999     

Mach reflection of a plane shock wave passing a mountain of 45° inclination

The transition from regular reflection (RR) to Mach reflection (MR) as a plane shock wave diffracts around a triangular mountain of 45° inclination is analysed in this paper, both by optical measurement in a shock tube and by numerical simulation the numerical method developed by Li Yingfan^[1] is of the FLIC type with triangular mesh. The dependence of the critical transition point Lk ofRR→MR on shock Mach numberM _i is analyzed and the variations of the incidence angle ω _i of the impinging shock and the reflection angle ω _r with the distanceL ^* are investigated. Our experimental and numerical results agree well with the theoretical results of Iton and Italya.     

Interaction of two Mach reflections over concave double wedges-analytical model

A simplified analytical model for solving the wave configuration resulting when two triple points join together over a concave double wedge is developed. The model equations are solved analytically. Predictions of the model are compared to experimental results and fairly good agreement is obtained. It is believed that the present model can be used to better understand complex wave interaction phenomena. Received 2 May 1995 / Accepted 18 December 1997     

Analysis of double-Mach-reflection wave configurations with convexly curved Mach stems

The wave configuration of a double Mach reflection (DMR) with a convexly curved Mach stem and the resulted flow fields are analyzed. An analytical model describing the formation of a with a curved Mach stem and predicting its wave configuration is proposed. The transition criterion from a with a straight Mach stem to a with a curved Mach stem is also suggested. Predictions based on the analytical model are compared to experimental results. The agreement is found to be good to excellent. Received 5 July 1996 / Accepted 18 March 1998     

不稳定性对爆轰波楔面马赫反射的影响规律研究

采用一种两步化学反应模型对胞格爆轰波的楔面马赫反射过程进行了数值研究,从而澄清和解释胞格不稳定性对马赫反射发展模式和自相似性的影响。考虑到反应欧拉方程源项的刚性问题,本文采用附加RungeKutta方法耦合非刚性对流项和刚性反应源项,对流项的离散采用五阶精度的WENO格式。计算结果表明,对于稳定胞格爆轰波而言,其马赫反射过程本质上与ZND爆轰波的马赫反射是一致的,整体上不存在自相似性,胞格不稳定性只是造成了三波点轨迹线局部小振幅的波动。在楔面顶点附近,由于马赫杆是强过驱的,爆轰波的马赫反射过程是自相似的。在远场,爆轰波马赫反射的三波点轨迹线渐近的趋向于一条直线,说明重新获得了自相似性。对于不稳定的爆轰波,由于自身的不稳定性可以与马赫反射的强度相匹配,定义其三波点的轨迹是困难的,进行自相似性分析没有意义。     

Numerical confirmation of the hysteresis phenomenon in the regular to the Mach reflection transition in steady flows

Numerical calculations based on the Navier-Stokes equations are carried out to investigate the reflection of shock waves over straight reflecting surfaces in steady flows. The results for a flow Mach number of M₀=4.96 confirm the recent experimental findings of Chpoun et al. (1995) concerning the transition from regular to Mach reflection. Numerical calculations as well as experimental results show a hysteresis phenomenon during this transition and the regular reflection is found to be stable in the dual-solution domain in which theoretically both regular and Mach reflection wave configurations are possible.     

带隔板装药爆轰波马赫反射理论研究和数值模拟

基于三波理论和Whitham方法对带隔板装药爆轰波相互作用后发生的正规反射和非正规反射进行了理论分析,给出了爆轰波发生马赫反射时临界入射角和马赫杆增长角等参数的变化规律,提出了马赫杆高度的计算模型。基于凝聚炸药爆轰Jones-Wilkins-Lee(JWL)模型和冲击起爆的Lee-Tarver模型,利用有限元计算软件对带隔板装药爆轰波的传播过程进行了数值模拟。结果表明,发生马赫反射后,随着爆轰波的传播,马赫杆的高度不断增加。数值模拟结果与理论计算结果吻合较好,说明本文中采用的理论模型和数值模拟方法能够较准确地描述带隔板装药爆轰波马赫反射的传播过程。     

Simulation of the Mach reflection in supersonic flows by the CE/SE method

This study employs the Space-Time Conservation Element and Solution Element (CE/SE) method to determine the influence of downstream flow conditions on Mach stem height. The results indicate that the Mach stem height depends on the incident shock wave angle and the distance between the trailing edge and the symmetry plane. Furthermore, it is shown that the downstream length ratio and the trailing edge angle do not affect the Mach stem height nor the Mach reflection (MR) configuration, and the Space-Time Conservation Element and Solution Element method is able to simulate the MR as well as many other numerical schemes. Communicated by K. Takayama PACS 47.40.Nm     

Transition between regular and Mach reflection of shock waves: new numerical and experimental results

New numerical and experimental results on the transition between regular and Mach reflections of steady shock waves are presented. The influence of flow three-dimensionality on transition between steady regular and Mach reflection has been studied in detail both numerically and experimentally. Characteristic features of 3D shock wave configuration, such as peripheral Mach reflection, non-monotonous Mach stem variation in transverse direction, the existence of combined Mach-regular-peripheral Mach shock wave configuration, have been found in the numerical simulations. The application of laser sheet imaging technique in streamwise direction allowed us to confirm all the details of shock wave configuration in the experiments. Close agreement of the numerical and experimental data on Mach stem heights is shown. Received 23 November 2000 / Accepted 25 April 2001     

铅飞层中斜冲击波对碰马赫反射行为实验研究

采用线阵多普勒光纤探针测速技术(Doppler pins system,DPS)和高速光电分幅相机照相两种精密诊断技术,对铅飞层中斜冲击波对碰后的反射行为进行了观测。获得了飞层对碰部位速度-时间历史曲线和凸起形貌演化图像,给出了凸起轮廓发展演化过程、压力分布等实验数据和信息。结合冲击波反射理论,对铅飞层对碰区动力学现象进行了分析和解释,证实铅飞层中斜冲击波对碰后发生了马赫反射。     

Numerical simulation for nonstationary Mach reflection of a shock wave: A kinetic-model approach

A numerical simulation was performed for the process of formation of single Mach reflection on a wedge by solving a BGK type kinetic equation for the reduced distribution function with a finite difference scheme. The calculations were carried out for a shock Mach number 2.75 and wedge angle 25° in a monatomic gas, which corresponds to the conditions of single Mach reflection in the classical von Neumann theory. The calculations were performed for both diffuse and specular reflection of molecules at the wall surface. It is concluded that the diffuse reflection of molecules at the wall surface or the existence of the viscous or thermal layer is an essential factor for a nonstationary process at the initial stage of Mach reflection. Furthermore, the numerical results for diffuse reflection are found to simulate the experimental results very well, such as a transient process from regular reflection to Mach reflection along with shock propagation.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1990.     

The Mach reflection triple-point locus for internal and external conical diffraction of a moving shock wave

This paper examines the different behavior that occurs for the Mach reflection triple-point loci between the two fundamental axisymmetric cases, these being the external diffraction by a cone and the internal diffraction within a conically contracting channel. From equations derived in this paper using a shock dynamics approach, it has been shown that, for external diffraction over a cone, a possible solution is that the triple-point locus is a straight line which corresponds to the experimental results available, while for internal diffraction along a conically converging channel, it cannot be straight and is, in fact, a convex curve. In the latter case, a transition point is noted on the triple-point locus before which the locus is nearly straight but after which the curvature becomes marked. The second region diminishes as a proportion of the total locus with decreasing half cone angle.For the external case, a set of simple, axisymmetric equations are derived which allow a rapid estimation of the triple point locus angle and the Mach stem strength for any incident shock Mach number and cone angle combination. The equations for internal diffraction are similar and allow a quick computation of both the curved triple-point locus and the strength of the diffracting front of the shock wave. A comparison with experiment has been carried out and agreement is good.     

A revised three-shock solution for the Mach reflection of weak shocks (1.1<M i<1.5)

It is well known that the classical three-shock theory of von Neumann (1943) does not adequately describe the configuration of the shocks close to the triple-point of a Mach reflection of an incident shock with a Mach number less than about 1.5. The assumptions on which the three-shock theory is based have been examined and several of them are shown to be invalid. The assumption that may be of most significance is that the normal components of the flows behind the reflected and the Mach stem shocks are parallel. Dropping this assumption removes an essential equation in the three-shock solution. An alternative assumption, based on experimental observation, is that there is an approximate linear relationship between the pressure behind the reflected shock and the triple-point trajectory angle. This assumption permits a revised three-shock solution which gives results that are in agreement with experimental observations of reflections of incident shocks with Mach numbers between 1.1 and 1.5.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Conical Mach reflection of moving shock waves, Part 2: Physical and CFD experimentation

Analytical consideration of Mach reflections over cones using the ray-shock theory showed that they differ from those of the two-dimensional Mach reflection over wedges. Conical configurations include both self-similar and non-self-similar cases. However, even when self-similar, the conical configurations exhibit triple-point locus trajectory angles with values which, for any given reflection angle, differ from those of self-similar, wedge cases. Additionally, within the range of possible conical configurations, different values of self-similar triple-point locus angles exist for any given reflection angle depending on the geometry of the particular reflection process. While the ray-shock theory, as discussed in a previous paper on this research, provides a useful guide and a means of readily identifying these variations, verification using both shock tube and numerical simulations is required and is now available. Results of experimentation for both self-similar and non-self-similar axisym metric cases using these techniques are reported here and comparisons are made with the previous analysis. These support the calculations of the ray-shock theory over much of the reflection angle, Mach number range as well as highlighting some limitations of the theory. Received 15 October 1996 / Accepted 14 April 1997     

气相爆轰波在障碍物上Mach反射的实验验证

本文公布了气相爆轰波沿收缩管道传播时发生Mach反射的实验证据。在爆轰波通过的管道中安装不同楔角的楔块,形成管道的收缩。爆轰波在通过楔块时会发生Mach反射。利用烟熏玻璃片记录到了爆轰波Mach反射时形成的三波点迹线及其两侧胞格尺寸和密度的变化。据我们掌握的资料,这是首次用胞格结构变化的记录证实,气相爆轰波与无化学反应的空气中的冲击波一样,在一定的入射条件下会发生Mach反射。这一实验结果可使我们更深入了解爆轰波的本质,也为数值模拟气相爆轰波在障碍物上Mach反射现象提供了可对比的依据。     

The reflection of a shock wave over a cone

An investigation was made of the reflection of planar shock waves from cones. 86 cones, the half apex angle of which varied from 10° to 52° at every 0.5°, were installed in a 60 mm×150 mm diaphragmless shock tube equipped with holographic interferometry. The diaphragmless shock tube had a high degree of reproducibility with which the scatter of shock wave Mach number was within ±0.25% for shock wave Mach number ranging from 1.16 to approximately 2.0. The reflection of shock waves over cones was visualized using double exposure holographic interferometry. Whitham's geometrical shock wave dynamics was used to analyse the motion of Mach stems over cones. It is found that for relatively smaller apex angles of cones trajectory angles of resulting irregular reflections coincide with the so-called glancing incidence angles and their Mach stems appear to be continuously curved from its intersection point with the incident shock wave, which shows the chractericstic of von Neumann reflection. The domain of the existence of the von Neumann reflection was analytically obtained and was found to be broadened much more widely than that of two-dimensional reflections of shock waves over wedges.     

Numerical study of spherical blast-wave propagation and reflection

The objective of this study is to understand the flow structures of weak and strong spherical blast waves either propagating in a free field or interacting with a flat plate. A 5th-order weighted essentially non-oscillatory scheme with a 4th-order Runge-Kutta method is employed to solve the compressible Euler/Navier-Stokes equations in a finite volume approach. The real-gas effects are taken into account when high temperature occurs. A shock-tube problem with the real-gas effect is first tested in order to verify the solver accuracy. Moreover, unsteady shock waves moving over a stationary wedge with various wedge angles, resulting in different types of shock wave reflections, are also tested. It is found that the computed results agreed well with the existing data. Second, the propagation of a weak spherical blast wave, created by rupture of a high-pressure isothermal sphere, in a free field is studied. It is found that there are three minor shock waves moving behind the main shock. Third, the problem of a strong blast wave interacting with a flat plate is investigated. The flow structures associated with single and double Mach reflections are reported in detail. It is found that there are at least three local high-pressure regions near the flat plate. Received 27 July 2000 / Accepted 25 January 2002 – Published online 17 June 2002     

激波在不同三角楔面内传播特性的数值研究

激波在收缩管内的反射与聚焦会形成高温高压区,点燃可燃混合气并诱导爆轰,因此对爆轰发动机的点火具有重要意义。本文基于二维N-S方程,结合五阶WENO格式,对马赫数为6的正激波在三角形楔面内的反射与聚焦现象进行了数值研究。结果表明,楔面顶角的变化对激波的反射类型以及聚焦均有明显的影响:随着顶角的增加,激波的反射类型从马赫反射向过渡马赫反射和双马赫反射转变,且壁面上的前向射流更加明显;三波点第一次碰撞产生的高温高压区足够满足可燃混合气体的点火条件,且其温度与压力值随顶角的增加而增大;当激波在楔面上发生临界双马赫反射时,温度与压力达到最大;当顶角增加到一定值时,激波在楔面反射转变为常规反射,不会产生激波对碰,因而没有高温高压区。     

Analytical prediction of the wave configuration size in steady flow Mach reflections

Analitycal model for predicting the size of the Mach reflection wave configuration in steady flows has been improved (Azevedo 1989; Azevedo and Liu (1993)). Predictions based on the modified analytical model were compared to available experimental results. The agreement was found to be better than that obtained by Azevedo (1989) and Azevedo and Liu (1993). The reason for the better agreement is due to the fact that, unlike Azevedo's original model, downstream effects were not neglected in the modified model which was developed in the course of this study. Received 12 May 1996 / Accepted 15 January 1997