Poly(Urethane)-Crosslinked Poly(HEMA) Hydrogels

Abstract

Hydrogels have been prepared from 2-hydroxyethyl methacrylate polymerized in the presence of isocyanate-terminated poly(ethylene glycol) (PEG) crosslinking agents. PEGS of molecular weights 200, 400, and 1000 were investigated. The crosslinked nature of the hydrogels was demonstrated by their insolubility in solvents which normally dissolve poly(HEMA). Hexamethylene diisocyanate (HDI) was mainly used as the isocyanate. The molecular weight of the PEG and the crosslinker content significantly influenced the equilibrium water sorption and mechanical properties of the saturated networks. It was observed that as the molecular weight of the PEG increased, the water sorption increased and the nominal modulus decreased. However, for higher levels of cross-linker, water sorption decreased and modulus increased at low molecular weight PEG; for PEG 1000, water absorption increased as crosslinker content increased. These results are explained by the competing effects of flexibility, crosslink density, and hydrophobicity contributed by the various constituents of the hydrogels.     

聚癸二酸丙三醇酯对聚乳酸的改性

以丙三醇和癸二酸为单体通过熔融缩聚制得了聚癸二酸丙三醇酯(PGS),并用其预聚物(p-PGS)对聚L-丙交酯(PLLA)进行共混改性.利用傅立叶变换红外光谱(FT-IR)、核磁共振氢谱(1H-NMR)及凝胶渗透色谱(GPC)法对P-PGS的结构进行表征,并研究了改性后材料的力学性能、两相相容性、亲水性能和细胞相容性.结果表明:P-PGS具有支化分子结构,分散系数约为2.7;共混改性后的材料弹性模量和拉伸强度均有所下降,而断裂伸长率从7 %显著提高到150%左右;PLLA/PGS属于海岛式共混结构,PGS以小于10μm的尺寸均匀分布在PLLA基体中;共混后材料的亲水性也有一定的提高,且几乎保持了PLLA原有的细胞相容性.     

Functionalization of Conductive Poly(thiophenes) and Poly(pyrroles)

New methods for functionalization of conductive poly(thiophenes) and poly(pyrroles) using fused aromatics or crown ethers are discussed.     

Poly(dimethylsilylene-co-diphenylsilylene)

In this work several polyorganosilylenes were synthesized including homo-and copolymers containing SiMe₂ and SiPh₂ units. A Wurtz-type coupling reaction of the respective dichlorodiorganosilanes with sodium metal, varying the Ph₂SiCl₂/Me₂SiCl₂ ratio was the chosen synthesis method. Products with different characteristics for solubility, structure (cyclic or linear), composition, and molecular weight distribution could be obtained depending on the comonomer ratios employed. The polysilane derivatives were characterized by infrared spectroscopy (IR), proton nuclear magnetic resonance (¹H-NMR), and gel permeation chromatography (GPC). Valuable information related to the comonomers' reactivities was obtained, such as molecular weight distribution, composition, and relationships between yields of soluble, insoluble, and cyclic materials of each polycondensation reaction. © 1992 John Wiley & Sons, Inc.     

Poly (dodecacarborane-siloxanes)

The need for elastomeric polymers which will maintain their elastic properties at high temperatures has led to a wide interest in inorganic-based polymers [l]. The development of carborane-siloxane polymers in the early 1960s was a breakthrough in the search for a high-temperature elastomer. Incorporation of a carborane moiety into the siloxane backbone significantly enhanced the overall thermal stability [2].     

Metallkomplexe von alkylsubstituierten Poly(vinylpyridin-l-oxiden) und von Poly(dimethylaminostyrol-N-oxiden)

Ohne Zusammenfassung     

高分子量聚对二氧环己酮改进聚DL-乳酸柔韧性的研究

为了提高DL-聚乳酸(PDLLA)的柔韧性,将10～20wt%不同比例的由本课题组自主合成的高分子量聚对二氧环己酮(PPDO)加入到PDLLA基体中,对共混物的微观两相形态、力学性能、热学性能和表面性质、降解性能等物化性质进行了研究.实验结果表明,PPDO加入后,在PDLLA/PPDO共混物的柔韧性得到显著提高的同时,共混物表面亲水性相应提高,降解速率也随之加快.     

Metallkomplexe von alkylsubstituierten Poly(vinylpyridin-l-oxiden) und von Poly(dimethylaminostyrol-N-oxiden)

Ohne Zusammenfassung     

Dilute Solution Properties of Poly(methacrylonitrile-co-styrene) and Poly(acrylonitrile-co-styrene)

Poly(methacrylonitrile-co-styrene) (PMANS) and Poly(acrylo-nitrile- co- styrene) (PANS) having 1:1 composition were prepared with free-radical initiators. The polymers were fractionated into fractions having narrow molecular weight distribution. The dilute solution properties of the fractionated copolymers were studied by light scattering, viscometry, and osmometry in solvents (methyl ethyl ketone, dimethylformamide, and acetone), [n]-M _w and(r²)_w ^l/2?M _w relationships have been established. The validity of the various graphical methods for the determination of Flory′s constant, K _θ were observed.

From the values of the steric factors it was noticed that the copolymer coil of PANS is stiffer than that of PMANS.     

Micellization and Thermogelation of Poly(ether urethane)s Comprising Poly(ethylene glycol) and Poly(propylene glycol)

A series of multiblock poly(ether urethane)s comprising poly(ethylene glycol) (PEG), and poly(propylene glycol) (PPG) segments were synthesized. Their aqueous solutions exhibited thermogelling behavior at critical gelation concentrations (CGC) ranging from 8 to 12 wt%. The composition and structural information of the copolymers were studied by GPC and ¹H NMR. The critical micellization concentration (CMC) and thermodynamic parameters for micelle formation were determined at different temperatures. The temperature response of the copolymer solutions were studied and found to be associated with the composition of the copolymers.     

Compatibility of Poly(vinyl chloride) with Polyalkyleneoxides. I. Poly(methylene oxide) and Poly(ethylene oxide)

The compatibility of poly(vinyl chloride) (PVC) with linear polyethers is examined over the entire composition range. This study examines blends with poly(methylene oxide) (PMO) and poly(ethylene oxide) (PEO) of medium (MMW) and high (HMW) molecular weight. The techniques used are dynamic mechanical analysis, DSC, and optical microscopy (phase contrast and polarizing). The results indicate that all polyethers show limited miscibility in the melt at high PVC contents. Proper analysis of the T_m data using the Kwei-Frisch and Hoffman-Weeks procedures allows the determination of the thermodynamic interaction parameter, which is found to be close to zero for all pairs of blends.     

Well-defined Poly(lactic acid)s Containing Poly(ethylene glycol) Side-chains

Poly(ethylene glycol) (PEG) side-chain functionalized lactide analogues have been synthesized in four steps from commercially available L-lactide. The key step in the synthesis is the 1,3-dipolar cycloaddition between PEG-azides and a highly strained spirolactide-heptene monomer, which proceeds in high conversions. The PEG-grafted lactides analogues were polymerized via ring-opening polymerization using triazacyclodecene as organocatalyst to give well-defined tri- and hepta-(ethylene glycol)-poly(lactide)s (PLA) with molecular weights above 10 kDa and polydispersity indices between 1.6 and 2.1. PEG-poly(lactide) (PLA) with PEG chain M(n) 2000 was also prepared but GPC analysis showed a bimodal profile indicating the presence of starting macromonomer. Cell adhesion assays were performed using MC3T3 E-1 osteoblast-like cells demonstrating that PEG-containing PLA reduces cell adhesion significantly when compared to unfunctionalized PLA.     

Poly(3,4-ethylenedioxyselenophene)

The first highly conductive polyselenophene, namely, poly(3,4-ethylenedioxyselenophene) (PEDOS), was synthesized by taking advantage of a novel method for efficiently contracting the selenophene ring. PEDOS shows a relatively low band gap (1.4 eV), very high stability in the oxidized state, and a well-defined spectroelectrochemistry.     

Poly(dialkoxyethyl itaconates)

The oxidative and non-oxidative degradation of poly(di-methoxy-), poly(di-ethoxy-), poly(di-iso-propoxy-) and poly(di-n-butoxyethyl itaconate) were investigated by thermogravimetry. Characteristic degradation temperatures and apparent activation energies of degradation were determined for the non-oxidative degradation of all the investigated polymers. It was not possible to determine these characteristics in the presence of oxygen as the degradation was accompanied by a secondary exothermic reaction. Based on examination of the monomers, it is supposed that the exothermic reaction is a repolymerisation of the monomers released during the earlier stages of polymer degradation.     

Metal-Containing Poly(Organophosphazenes)

Summary: In this paper we highlighted the general situation of metal containing poly(organophosphazenes) and we presented the status of the art in this area in terms of interactions between phosphazene materials and different types of metals. Possible practical utilization of the polymers obtained is also envisaged.     

Poly(dimethyl biphenylene)

Two methods were investigated for the preparation of poly(dimethyl biphenylene) in a search for polymers combining good solubility with sufficiently high chain extension to produce a lyotropic nematic phase. The Ullmann reaction was used to condense 4,4′-diiodo-3,3′-dimethyl biphenyl and the corresponding 2,2′-dimethyl derivative with copper, and 4,4′-dibromo-2,2′-dimethyl biphenyl was polymerized using the coupling reagent, bis(1,5-cyclooctadiene)nickel(0), developed by Semmelhack. The Ullmann polymers were completely soluble in CHCl₃ but only partially soluble in toluene, whereas earlier work had indicated similar polymers of higher molecular weight to be completely soluble in toluene. All the polymers produced were of low molecular weight and no evidence of the nematic phase was found by polarized light microscopy for CHCl₃ solutions over the concentration range 6.8–25% by weight.