Magnetic anisotropy of UFe6Al6

A comparative study of magnetization in UFe₆Al₆ and LuFe₆Al₆ single crystals gives clear evidence for the magnetic state of uranium in UFe₆Al₆. Both compounds exhibit the easy-plane type of magnetic anisotropy, however, the anisotropy energy in UFe₆Al₆, characterized by the anisotropy constants K₁=−7.3 MJ m⁻³ and K₂=−1.25 MJ m⁻³ at 2 K, exceeds by an order of magnitude that in LuFe₆Al₆. Anisotropy within the easy plane in the ferromagnetic state and anisotropy in the paramagnetic range, both absent in LuFe₆Al₆, are observed in UFe₆Al₆.     

Spin-glass-like behaviour and magnetic order in Mn[Cr0.5Ga1.5]S4 spinels

Magnetization and susceptibility were investigated as a function of temperature and magnetic field in polycrystalline Mn[Cr_0.5Ga_1.5]S₄ spinel. The dc susceptibility measurements at 919 Oe showed a disordered ferrimagnetic behaviour with a Curie-Weiss temperature θ_CW=−55 K and an effective magnetic moment of 5.96 μ_B close to the spin-only value of 6.52 μ_B for Cr³⁺ and Mn²⁺ ions in the 3d³ and 3d⁵ configurations, respectively. The magnetization measured at 100 Oe revealed the multiple magnetic transitions with a sharp maximum at the Néel temperature T_N=3.9 K, a minimum at the Yafet-Kittel temperature T_YK=5 K, a broad maximum at the freezing temperature T_f=7.9 K, and an inflection point at the Curie temperature T_C=48 K indicating a transition to paramagnetic phase. A large splitting between the zero-field-cooled (ZFC) and field-cooled (FC) magnetizations at a temperature smaller than T_C suggests the presence of spin-glass-like behaviour. This behaviour is considered in a framework of competing interactions between the antiferromagnetic ordering of the A(Mn) sublattice and the ferromagnetic ordering of the B(Cr) sublattice.     

The magnetic structure of the compound Ho5Sb3

We have investigated the magnetic behavior of Ho₅Sb₃ compound (Mn₅Si₃-type, hexagonal; a=0.8865(1) nm, c=0.6232(1) nm, as derived from X-ray Guinier powder pattern) by using the techniques of magnetization, electrical resistivity, heat capacity and neutron diffraction. We find that Ho₅Sb₃ exhibits a ferrimagnetic type (Ferrimagnet I) ordering below 60 K with propagation vectors K₀=[0, 0, 1] and K₁=[±K_x, 0, 0]. Below 40 K, the thermal variation of magnetic reflections and the appearance of an additional magnetic component with propagation vector K₂=[0, 1/2, 0] show the onset of an antiferromagnetic type of ordering in the magnetic structure; which evolves into yet another ferrimagnetic structure (Ferrimagnet II) as the temperature is lowered down to 2 K. The magnetic moments of the Ho atoms at the (4d) and (6g) sites with magnitudes of nearly 7.4 and 6.3 μ_B at 2 K, respectively, are inclined approximately at 70° to the c-axis.     

Thermomagnetic transitions and coercivity mechanism in bulk composite Nd60Fe30Al10 alloys

The thermomagnetic behaviour (within the temperature range 553-300 K) for the bulk composite Nd₆₀Fe₃₀Al₁₀ alloy is described in terms of a transition from paramagnetic to superferromagnetic state at T=553 K, followed by a ferromagnetic ordering for T<473 K. For the superferromagnetic regime, the alloy thermomagnetic response was associated to a homogeneous distribution of magnetic clusters with mean magnetic moment and size of 1072 μ_B and 2.5 nm, respectively. For T<473 K, a pinning model of domain walls described properly the alloy coercivity dependence with temperature, from which the domain wall width and the magnetic anisotropy constant were estimated as being of ≈8 nm and ≈10⁵ J/m³, typical values of hard magnetic phases. Results are supported by microstructural and magnetic domain observations.     

Dielectric and optical behaviors in relaxor ferroelectric Pb(In1/2Nb1/2)1−xTixO3 crystal

Dielectric permittivities (ε′,ε″) have been measured as functions of temperature (140-535 K) and frequency (500 Hz-2.0 MHz) in a (001)-cut Pb(In_1/2Nb_1/2)_0.7Ti_0.3O₃ (PINT30%) single crystal grown by the modified Bridgman method with Pb(Mg_1/3Nb_2/3)_0.71Ti_0.29O₃ (PMNT29%) seed crystal. A diffused phase transition was observed in the temperature region of ∼430-460 K with strong frequency dispersion. Above the Burns temperature T_B≅510 K, the dielectric permittivity was found to follow the Curie-Weiss behavior, ε′=C/(T−T_C), with parameters C=3.9×10⁵ and T_C=472 K. Below T_B≅510 K, polar nanoclusters are considered to appear and are responsible for the diffused dielectric anomaly. Optical transmission, refractive indices, and the Cauchy equations were obtained as a function of wavelength at room temperature. The unpoled crystal shows almost no birefringence, indicating that the average structural symmetry is optically isotropic. The crystal exhibits a broad transparency in the wavelength range of ∼0.4-6.0 μm.     

Exchange bias in (1 1 0)-orientated Bi0.9La0.1FeO3/La0.5Ca0.5MnO3 films

We performed a systematic study on the exchange bias in (1 1 0)-orientated Bi_0.9La_0.1FeO₃/La_0.5Ca_0.5MnO₃ (BLFO/LCMO) heterostructure with a fixed BLFO film thickness of 600 nm and different LCMO layers ranging from t=0 to 30 nm. The LCMO is found to be weakly ferromagnetic, with the Curie temperature descending from ∼225 K to 0 as the layer thickness decreases from 30 nm to 3 nm. The main magnetic contributions come from the BLFO film, and the areal magnetization ratio is 1:0.07 for t=5 nm and 1:0.82 for t=30 nm for BLFO to LCMO at the temperature of 5 K. Further experiments show the presence of significant exchange bias, and it is, at the temperature of 10 K, ∼40 Oe for t=0 and ∼260 Oe for t=30 nm. The exchange bias reduces dramatically upon warming and disappears above the blocking temperature of the spin-glasslike behavior observed in the samples. The possible origin for exchange bias is discussed.     

Synthesis,magnetic and electrical transport properties of magnetoresistance material Sr2FeMoO6 by microwave sintering

Magnetoresistance material Sr₂FeMoO₆ with double perovskite structure was synthesized by microwave sintering method using SrCO₃, Fe₂O₃ and MoO₃ as raw materials, with MnO₂ for microwave absorber. The phase structure, magnetic and electrical transport properties were investigated by X-ray powder diffraction (XRD) and vibrating-sample magnetometer. XRD analysis shows that the as-synthesized sample is Sr₂FeMoO₆ with tetragonal crystal structure and I4/mmm space group. The unit cell parameters are a=0.5587 nm, c=0.7894 nm, volume=0.2464 nm³. The calculated grain size of the sample is 31.62 nm, which is obtained by the Scherrer formula using the diffraction data. Magnetism testing results show that the sample Sr₂FeMoO₆ is ferromagnetic with the magnetic transition temperature of about 380 K. Under 1.0 T magnetic field, the saturation and spontaneous magnetization of Sr₂FeMoO₆ is 1.25 μ_B/f.u. and 1.00 μ_B/f.u. at room temperature. The magnetoresistance ratio of the sample is 28%. Electrical transport properties testing results indicate that the sample exhibits typical semiconductor behavior. The conductive mechanism of Sr₂FeMoO₆ is highly dependent on temperature: within the temperature range of 100–300 K, the mechanism is attributed to the small polaron variable-range hopping model; while it is ascribed to the adiabatic small polaron model within the temperature range of 80–100 K.     

Structural phase transitions at high-temperature in double perovskite Sr2GdRuO6

The crystal structure evolution of the Sr₂GdRuO₆ complex perovskite at high-temperature has been investigated over a wide temperature range between 298 K≤T≤1273 K. Powder X-ray diffraction measurements at room temperature and Rietveld analysis show that this compounds crystallizes in a monoclinic perovskite-type structure with P2₁/n (#14) space group and the 1:1 ordered arrangement of Ru⁵⁺ and Gd³⁺ cations over the six-coordinate M sites, with lattice parameters a=5.81032(8) Å, b=5.82341(4) Å, c=8.21939(7) Å, V=278.11(6) Å³ and angle β=90.311(2)^o. The high-temperature analysis shows that this material suffers two-phase transitions. At 373 K it adopts a monoclinic perovskite structure with I2/m space group, and lattice parameters a=5.81383(2) Å, b=5.82526(4) Å, c=8.22486(1) Å, V=278.56(2) Å³ and angle β=90.28(2)^o. Above of 773 K, it suffers a phase transition from monoclinic I2/m to tetragonal I4/m, with lattice parameters a=5.84779(1) Å, c=8.27261(1) Å, V=282.89(5) Å³ and angle β=90.02(9)^o. The high-temperature phase transition from monoclinic I2/m to tetragonal I4/m is characterized by strongly anisotropic displacements of the anions.     

Antiferromagnetic phase transition in garnet-type AgCa2Co2V3O12 and AgCa2Ni2V3O12

Antiferromagnetic phase transition in two vanadium garnets AgCa₂Co₂V₃O₁₂ and AgCa₂Ni₂V₃O₁₂ has been found and investigated extensively. The heat capacity exhibits sharp peak due to the antiferromagnetic order with the Néel temperature T_N=6.39 K for AgCa₂Co₂V₃O₁₂ and 7.21 K for AgCa₂Ni₂V₃O₁₂, respectively. The magnetic susceptibilities exhibit broad maximum, and these T_N correspond to the inflection points of the magnetic susceptibility χ a little lower than T(χ_max). The magnetic entropy changes from zero to 20 K per mol Co²⁺ and Ni²⁺ ions are 5.31 J K⁻¹ mol-Co²⁺-ion⁻¹ and 6.85 J K⁻¹ mol-Ni²⁺-ion⁻¹, indicating S=1/2 for Co²⁺ ion and S=1 for Ni²⁺ ion. The magnetic susceptibility of AgCa₂Ni₂V₃O₁₂ shows the Curie-Weiss behavior between 20 and 350 K with the effective magnetic moment μ_eff=3.23 μ_B Ni²⁺-ion⁻¹ and the Weiss constant θ=−16.4 K (antiferromagnetic sign). Nevertheless, the simple Curie-Weiss law cannot be applicable for AgCa₂Co₂V₃O₁₂. The complex temperature dependence of magnetic susceptibility has been interpreted within the framework of Tanabe-Sugano energy diagram, which is analyzed on the basis of crystalline electric field. The ground state is the spin doublet state ²E(t₂⁶e) and the first excited state is spin quartet state ⁴T₁(t₂⁵e²) which locates extremely close to the ground state. The low spin state S=1/2 for Co²⁺ ion is verified experimentally at least below 20 K which is in agreement with the result of the heat capacity.     

Temperature-dependent photoluminescence in La2/3Ca1/3MnO3

Visible photoluminescence and its temperature dependence of La_2/3Ca_1/3MnO₃ in the temperature range 138-293 K were measured. It was observed that the main broad band centered at ∼1.77 eV with the shoulders at ∼1.57 and ∼1.90 eV existed in the entire temperature range. It can be well fitted by three Gaussian curves B₁, B₂ and B₃ centered at ∼1.52, ∼1.75 and ∼1.92 eV, respectively. The intensities of the peak B₁ and B₂ vary as temperature increases. In the entire temperature range, the intensity of B₁ increases with increasing temperature, whereas that of B₂ decreases. The photoluminescence mechanisms for La_2/3Ca_1/3MnO₃ are presented based on the electronic structures formed by the interactions among spin, charge and lattice, in which B₁ was identified with the charge transfer excitation of an electron from the lower Jahn-Teller split e_g level of a Mn³⁺ ion to the e_g level of an adjacent Mn⁴⁺ ion, B₂ is assigned to the transition between the spin up and spin down e_g bands separated by Hund's coupling energy E_J and B₃ is attributed to the transition, determined by the crystal field energy E_C, between a t_2g core electron of Mn³⁺ to the spin up e_g bands of Mn⁴⁺ by a dipole allowed charge transfer process.     

Synthesis and magnetic properties of Au-coated amorphous Fe20Ni80 nanoparticles

Gold-coated nanoparticles of Fe₂₀Ni₈₀ (permalloy) have been synthesized by a microemulsion process. The as-prepared samples consist of ∼5 nm diameter particles of amorphous Fe₂₀Ni₈₀ that are likely encapsulated in B₂O₃. One or more Fe₂₀Ni₈₀@B₂O₃ particles are subsequently encapsulated in 8-20 nm gold nanospheres, as determined by TEM and X-ray powder diffraction (XRD) line broadening. The gold shells were found to be under expansive strain. Magnetic data confirm the existence of a superparamagnetic phase with a blocking temperature, T_B, of ∼33 K. The saturation magnetization, M_S, of the as-prepared, Au-coated sample is ∼65 emu g⁻¹ at 5 K and ∼16 emu g⁻¹ at 300 K. The coercivity, H_C, is ∼280 Oe at 5 K.     

Medium range ordering and some magnetic properties of amorphous Fe90Zr7B3 alloy

High-resolution electron microscopy (HREM) reveals in the as-quenched Fe₉₀Zr₇B₃ alloy the existence of medium range ordered (MRO) regions 1-2 nm in size. Transmission Mössbauer spectroscopy confirms that these regions are α-Fe MRO ones. Above the Curie point of the amorphous phase (T_C=(257±2)K) they behave like non-interacting superparamagnetic particles with the magnetization decreasing linearly with the temperature. For these particles the average magnetic moment of 390μ_B and the average size of 1.7 nm, in excellent agreement with HREM observations, were estimated. The maximum of the isothermal magnetic entropy change at the maximum magnetizing field induction of 2 T occurs at the Curie temperature of the amorphous phase and equals to 1.05 Jkg⁻¹ K⁻¹. The magnetic entropy changes exhibit the linear dependence on the maximum magnetizing field induction in the range 0.5-2 T below, near and above T_C. Such correlations are attributed to superparamagnetic behavior of α-Fe MRO regions.     

Synthesis, structure and magnetic properties of the new double perovskite Ca2CrSbO6

The title double perovskite has been synthesized by solid-state reaction in air. The crystal structure has been studied from powder X-ray diffraction data. Rietveld fits to the pattern show that this compound has a monoclinic symmetry [a=5.4932(3) Å, b=5.4081(3) Å, c=7.6901(5) Å, β=90.0022(1)°, at 300 K] defined in the space group P2₁/n, where the Cr and Sb cations are almost completely ordered in the B-sublattice of the perovskite structure. Magnetic susceptibility and magnetization measurements show that this compound behaves as a Curie-Weiss paramagnet at high temperatures with μ_eff=3.53(1) μ_B and θ_P=8 K, and exhibits a robust ferromagnetic component below the ordering temperature of T_C=13 K, with a saturation magnetization of 2.36 μ_B/f.u. at 5 K. To our knowledge, this is the first example of a ferromagnetic double perovskite containing a non-magnetic element, such as Sb, occupying one half of the B positions of the perovskite structure.     

Crystal structural, magnetic and electrical transport properties of CeKFeMoO6 double perovskite

The crystal structural, magnetic and electrical transport properties of double perovskite CeKFeMoO₆ have been investigated. The crystal structure of the compound is assigned to the monoclinic system with space group P2₁/n and its lattice parameters are a=0.55345(3) nm, b=0.56068(2) nm, c=0.78390(1) nm, β=89.874(2). The divergence between zero-field-cooling and field-cooling M-T curves demonstrates the anisotropic behavior. The Curie temperature measured from C_p-T curve is about 340 K. Isothermal magnetization curve shows that the saturation and spontaneous magnetization are 1.90 and 1.43 μ_B/f.u. at 300 K, respectively. The electrical behavior of the sample shows a semiconductor. The electrical transport behavior can be described by variable range hopping model. Large magnetoresistance, −0.88 and −0.18, can be observed under low magnetic field, 0.5 T, at low and room temperature, respectively.     

Effect of surface-topology on magnetic properties in (La0.6Eu0.4)0.67Ca0.33MnO3 of anisotropic shape of nanoplates

(La_0.6Eu_0.4)_0.67Ca_0.33MnO₃ has been prepared in the shape of nanoplates of single crystallites (an orthorhombic structure) through polymer templates. HRTEM images reveal 18, 25, and 30 nm thicknesses of plates after heating a precursor powder at 873, 1073, and 1273 K in air for 2 h. These values present average crystallite size determined from broadening of the X-ray diffraction peaks. A spin-glass-like surface (GS) overlayer (3-5 nm thickness) in such plates facilitates a ferromagnetic→ferrimagnetic reordering with markedly suppressed Curie point T_C, i.e., as small as 90 K in a 873 K heated sample, from the parent value 268 K. The T_C point increases to 103 K (or 120 K) when heating at higher temperature 1073 (or 1273 K), during which the core grows at the expense of the overlayer. The GS tailors as high coercivity H_c as 617 Oe in the zero field cooled (ZFC) sample that is decreased to 500 Oe in the field cooled (FC) sample in the surface spin-freezing along the field direction. The H_c-value (ZFC) that steps down successively to 252 Oe on the overlayer is thinned down by heating at 1273 K. Samples heated at 873, 1073, or 1273 K have regularly increased saturation magnetization 35.3, 63.9, or 69.6 emu/g in ZFC, while 43.7, 70.2, or 75.5 emu/g in FC measured at 10 K. The ferrimagnetic reordering are described based on the scenario of an antiferromagnetic exchange coupling between the Eu³⁺ and Mn³⁺ (or Mn⁴⁺) sublattices.     

EDXRF measurements on gold diffusion-doped Bi1.8Pb0.35Sr1.9Ca2.1Cu3Oy

Gold (Au) diffusion in superconducting Bi_1.8Pb_0.35Sr_1.9Ca_2.1Cu₃O_y was investigated over the temperature range 500-800 °C by the energy dispersive X-ray fluorescence (EDXRF) technique. It is found that the Au diffusion coefficient decreases as the diffusion-annealing temperature decreases. The temperature dependences of Au diffusion coefficient in grains and over grain boundaries are described by the relations D₁=6.7×10⁻⁵exp(−1.19 eV/k_BT) and D₂=9.7×10⁻⁴exp(−1.09 eV/k_BT), respectively. The diffusion doping of Bi-2223 by Au causes a significant increase of the lattice parameter c by about 0.19%. For the Au-diffused samples, dc electrical resistivity and transport critical current density measurements indicated the critical transition temperature increased from 100 to 104 K and the critical current density increased from 40 to 125 A cm⁻², in comparison with those of undoped samples. From scanning electron microscope (SEM) and X-ray diffraction (XRD) measurements it is observed that Au doping of the sample also improved the surface morphology and increased the ratio of the high-T_c phase to the low-T_c phase. The possible reasons for the observed improvement in microstructure and superconducting properties of the samples due to Au diffusion are also discussed.     

A variable temperature EPR study of the manganites (La1/3Sm2/3)2/3SrxBa0.33−xMnO3 (x=0.0, 0.1, 0.2, 0.33): Small polaron hopping conductivity and Griffiths phase

Four manganite samples of the series, (La_1/3Sm_2/3)_2/3Sr_xBa_0.33−xMnO₃, with x=0.0, 0.1, 0.2 and 0.33, were investigated by X-band (∼9.5 GHz) electron paramagnetic resonance (EPR) in the temperature range 4-300 K. The temperature dependences of EPR lines and linewidths of the samples with x=0.0, 0.1 and 0.2, containing Ba²⁺ ions, exhibit similar behavior, all characterized by the transition temperatures (T_C) to ferromagnetic states in the 110-150 K range. However, the sample with x=0.33 (containing no Ba²⁺ ions) is characterized by a much higher T_C=205 K. This is due to significant structural changes effected by the substitution of Ba²⁺ ions by Sr²⁺ ions. There is an evidence of exchange narrowing of EPR lines near T_min, where the linewidth exhibits the minimum. Further, a correlation between the temperature dependence of the EPR linewidth and conductivity is observed in all samples, ascribed to the influence of small-polaron hopping conductivity in the paramagnetic state. The peak-to-peak EPR linewidth was fitted to ΔB_pp(T)=ΔB_pp,min+A/Texp(−E_a/k_BT), with E_a=0.09 eV for x=0.0, 0.1 and 0.2 and E_a=0.25 eV for x=0.33. From the published resistivity data, fitted here to σ(T)∝1/T exp(−E_σ/k_BT), the value of E_σ, the activation energy, was found to be E_σ=0.18 eV for samples with x=0.0, 0.1 and 0.2 and E_σ=0.25 eV for the sample with x=0.33. The differences in the values of E_a and E_σ in the samples with x= 0.0, 0.1and 0.2 and x=0.33 has been ascribed to the differences in the flip-flop and spin-hopping rates. The presence of Griffiths phase for the samples with x=0.1 and 0.2 is indicated; it is characterized by coexistence of ferromagnetic nanostructures (ferrons) and paramagnetic phase, attributed to electronic phase separation.     

Low-temperature absorption edge and photoluminescence in layered structured Tl2Ga2S3Se single crystals

The absorption edge of undoped Tl₂Ga₂S₃Se crystals have been studied through transmission and reflection measurements in the wavelength range 440–1100 nm and in the temperature range 10–300 K. The absorption edge was observed to shift toward lower energy values with increasing temperature. As a result, the rate of the indirect band gap variation with temperature γ=−2.6×10⁻⁴ eV/K and the absolute zero value of the band gap energy E_gi(0)=2.42 eV were obtained.     

Studies on fabrication of Ag/Tl2Ba2Ca2Cu3O10/CdSe heterostructures with electrochemical technique

The Ag/Tl₂Ba₂Ca₂Cu₃O₁₀/CdSe heterostructure was fabricated at room temperature by soft electrochemical processing technique for the first time. The formation of the heterostructure with non-diffusive interfaces was confirmed by X-ray diffraction. The crystallite sizes determined for Tl-2223 and CdSe films were 33 nm and 25 nm, respectively. The Tl₂Ba₂Ca₂Cu₃O₁₀ film electrodeposited onto Ag-substrate has shown the superconducting transition temperature T_c at 116.5 K and J_c = 2.1 × 10³ A/cm². These values were found to improve after the deposition of CdSe onto Ag/Tl-2223 films. The effect of red He-Ne laser irradiation on the superconducting properties of heterostructure are studied and discussed at length in this paper.     

Synthesis and magnetic characterization of cobalt-substituted ferrite (CoxFe3−xO4) nanoparticles

Cobalt-substituted ferrite nanoparticles were synthesized with a narrow size distribution using reverse micelles formed in the system water/AOT/isooctane. Fe:Co ratios of 3:1, 4:1, and 5:1 were used in the synthesis, obtaining cobalt-substituted ferrites (Co_xFe_3−xO₄) and some indication of γ-Fe₃O₄ when 4:1 and 5:1 Fe:Co ratios were used. Inductively coupled plasma mass spectroscopy (ICP-MS) verified the presence of cobalt in all samples. Fourier transform infrared (FTIR) showed bands at ∼560 and ∼400 cm⁻¹, characteristic of the metal–oxygen bond in ferrites. Transmission electron microscopy showed that the number median diameter of the particles was ∼3 nm with a geometric deviation of ∼0.2. X-ray diffraction (XRD) confirmed the inverse spinel structure typical of ferrites with a lattice parameter of a=8.388 Å for Co_0.61Fe_0.39O₄, which is near that of CoFe₂O₄ (a=8.394 Å). Magnetic properties were determined using a superconducting quantum interference device (SQUID). Coercivities higher than 8 kOe were observed at 5 K, whereas at 300 K the particles showed superparamagnetic behavior. The anisotropy constant was determined based on the Debye model for a magnetic dipole in an oscillating field and an expression relating χ′ and the temperature of the in-phase susceptibility peak. Anisotropy constant values in the order of ∼10⁶ erg/cm³ were determined using the Debye model, whereas anisotropy constants in the order of ∼10⁷ erg/cm³ were calculated assuming Ωτ=1 at the temperature peak of the in-phase component of the susceptibility curve as commonly done in the literature. Our analysis demonstrates that the assumption Ωτ=1 at the temperature peak of χ′ is rigorously incorrect.