Temperature dependence of the stability of written bits in a magnetic hard-disk medium investigated by magnetic force microscopy

The thermal stability of written bits in a magnetic hard-disk medium has been investigated with a magnetic force microscope (MFM), which was equipped with an in situ heating system capable of heating the medium up to 300 °C. It is shown that both the annealing temperature and the duration have significant effect on the decay of the MFM signal. No signal decay is observed when annealing for 30 min up to temperatures of 200 °C. The MFM signal decays rapidly with increasing temperature, for temperatures over 200 °C. Repeated annealing at 280 °C with a duration below 10 min does not cause any signal decay.     

Microstructure and antibacterial properties of microwave plasma nitrided layers on biomedical stainless steels

Nitriding of AISI 303 austenitic stainless steel using microwave plasma system at various temperatures was conducted in the present study. The nitrided layers were characterized via scanning electron microscopy, glancing angle X-ray diffraction, transmission electron microscopy and Vickers microhardness tester. The antibacterial properties of this nitrided layer were evaluated. During nitriding treatment between 350 °C and 550 °C, the phase transformation sequence on the nitrided layers of the alloys was found to be γ → (γ + γ_N) → (γ + α + CrN). The analytical results revealed that the surface hardness of AISI 303 stainless steel could be enhanced with the formation of γ_N phase in nitriding process. Antibacterial test also demonstrated the nitrided layer processed the excellent antibacterial properties. The enhanced surface hardness and antibacterial properties make the nitrided AISI 303 austenitic stainless steel to be one of the essential materials in the biomedical applications.     

Synthesis and characterization of magnetic diphase ZnFe(2)O(4) /γ-Fe(2)O(3) electrospun fibers

Magnetic nanofibers of ZnFe₂O₄/γ-Fe₂O₃ composite were synthesized by electrospinning from a sol-gel solution containing a molar ratio (Fe/Zn) of 3. The effects of the calcination temperature on phase composition, particle size and magnetic properties have been investigated. Zinc ferrite fibers were obtained by calcinating the electrospun fibers in air from 300 to 800 °C and characterized by thermogravimetric analyses, Fourier transformed infrared spectroscopy, X-ray photoemission spectroscopy, X-ray diffraction, vibration sample magnetometry and magnetic force microscopy. The resulting fibers, with diameters ranging from 90 to 150 nm, were ferrimagnetic with high saturation magnetization as compared to bulk. An increase in the calcination temperature resulted in an increase in particle size and saturation magnetization. The observed increase in saturation magnetization was most likely due to the formation and growth of ZnFe₂O₄/γ-Fe₂O₃ diphase crystals. The highest saturation magnetization (45 emu/g) was obtained for fibers calcined at 800 °C.     

Evolution of steel surface composition with heating in vacuum and in air

X-ray photoelectron spectroscopy (XPS) has been used to investigate the changes in surface composition of three steels as they have undergone heating. The steels were mild steel, and two austenitic stainless steels, commonly designated 304 and 316 stainless steels. XPS measurements were made on the untreated samples, and then following heating for 30 min in vacuo and in a 1 × 10⁻⁶ Torr partial pressure of air, at temperatures between 100 °C and 600 °C.Mild steel behaves differently to the two stainless steels under the heating conditions. In mild steel the iron content of the surface increased, with oxygen and carbon decreasing, as a function of increasing temperature. The chemical state of the iron also changed from oxide at low temperatures, to metallic at temperatures above 450 °C.In both stainless steels the amount of iron present in the surface decreased with increasing temperature. The decrease in iron at the surface was accompanied by an increase in the amount of chromium at the steel surface. At temperatures above 450 °C the iron in both 304 and 316 stainless steels showed significant contributions from metallic iron, whilst the chromium present was in an oxide state. In 316 stainless steel heated to 600 °C there was some metallic chromium present in the surface layer.The surfaces heated in air showed the least variation in composition, with the major change being the loss of carbon from the surfaces following heating above 300 °C. There was also a minor increase in the concentration of chromium present on both the stainless steels heated under these conditions. There was also little change in the oxidation state of the iron and chromium present on the surface of these steels. There was some evidence of the thickening of the surface oxides as seen by the loss of the lower binding energy signal in the iron or chromium core level scans.The surfaces heated in vacuum showed a similar trend in the concentration of carbon on the surfaces, however the overall concentration of oxygen decreased throughout the heating of these steels. There were also significant changes in the oxidation state of the iron and chromium on these surfaces with significant amounts or iron and chromium present in the metallic form following heating up to 600 °C.It appears that the carbon contamination on the surfaces plays an important role in the fate of the surface oxide layer for all of the steels heated in a vacuum environment.     

Magnetic properties of field-annealed FeCo thin films

Fe₅₀Co₅₀ thin films with thickness of 30 and 4 nm have been produced by rf sputtering on glass substrates, and their surface has been observed with atomic force microscopy (AFM) and magnetic force microscopy (MFM); MFM images reveal a non-null component of the magnetization perpendicular to the film plane. Selected samples have been annealed in vacuum at temperatures of 300 and 350 °C for times between 20 and 120 min, under a static magnetic field of 100 Oe. DC hysteresis loops have been measured with an alternating gradient force magnetometer (AGFM) along the direction of the field applied during annealing and orthogonally to it. Samples with a thickness of 4 nm display lower coercive fields with respect to the 30 nm thick ones. Longer annealing times affect the development of a harder magnetic phase more oriented off the film plane. The field applied during annealing induces a moderate magnetic anisotropy only on 30 nm thick films.     

Magnetization of epitaxial MnGe alloys on Ge(1 1 1) substrates

The structural and magnetic properties of an Mn rich solid phase epitaxy Mn_xGe_1−x alloy grown on a clean 2 × 8-Ge(1 1 1) surface, with a Curie temperature of about 300 K are investigated. Magneto-optical  Kerr effect infers the existence of in-plane easy magnetization direction. We describe the epitaxial registry condition, the room temperature—zero field magnetic structure observed by magnetic force microscopy and the magneto-optical properties. The observations are consistent with the formation of epitaxial Mn₅Ge₃ alloy, with a modulated magnetic structure characterized by asymmetric 180° Bloch walls consisting of a vortex-like configuration of the local magnetization.     

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayers

High temperature annealing effect on structural and magnetic properties of Ti/Ni multilayer (ML) up to 600 °C have been studied and reported in this paper. Ti/Ni multilayer samples having constant layer thicknesses of 50 Å each are deposited on float glass and Si(1 1 1) substrates using electron-beam evaporation technique under ultra-high vacuum (UHV) conditions at room temperatures. The micro-structural parameters and their evolution with temperature for as-deposited as well as annealed multilayer samples up to 600 °C in a step of 100 °C for 1 h are determined by using X-ray diffraction (XRD) and grazing incidence X-ray reflectivity techniques. The X-ray diffraction pattern recorded at 300 °C annealed multilayer sample shows interesting structural transformation (from crystalline to amorphous) because of the solid-state reaction (SSR) and subsequent re-crystallization at higher temperatures of annealing, particularly at ≥400 °C due to the formation of TiNi₃ and Ti₂Ni alloy phases. Sample quality and surface morphology are examined by using atomic force microscopy (AFM) technique for both as-deposited as well as annealed multilayer samples. In addition to this, a temperature dependent dc resistivity measurement is also used to study the structural transformation and subsequent alloy phase formation due to annealing treatment. The corresponding magnetization behavior of multilayer samples after each stage of annealing has been investigated by using Magneto-Optical Kerr Effect (MOKE) technique and results are interpreted in terms of observed micro-structural changes.     

Anomalous phase transformation in magnetostrictive Fe81Ga19 alloy

In this work, we have investigated the room-temperature phase constitution of heat-treated Fe₈₁Ga₁₉ alloys cooled from 800 °C at different rates. Results show that at cooling rates in the range from 0.43 to 0.26 °C/min, in addition to the A2 matrix, an fcc phase also can be observed in Fe₈₁Ga₁₉ samples at room temperature. To investigate the precipitation of the fcc phase out of A2 matrix, a systematic study of phase constitution was carried out on the samples quenched from different temperatures during cooling from 800 °C at 0.32 °C/min, which reveals an anomalous phase transformation between A2 and fcc. Precipitation of the fcc phase from A2 matrix occurs at 500 °C and its volume fraction exhibits a sharp increase at 400 °C. However, it begins to dissolve when further decreasing the temperature and only a minor fcc phase can be retained at room temperature, which suggests that the fcc phase is metastable below 400 °C. Magnetic measurements indicate that the precipitation of fcc phase deteriorates the saturation magnetization of Fe₈₁Ga₁₉.     

Magnetic properties of a non-equilibrium Al(Fe–Ni) alloy powder by rod-milling and chemical leaching

In this paper, the magnetic properties of non-equilibrium nanocrystalline phase by chemical leaching of as-milled Al_0.6(Fe_0.5Ni_0.5)_0.4 powder is reported. X-ray diffractometry (XRD), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), vibrating sample magnetometry (VSM), and superconducting quantum interference device magnetometry (SQUID) were used to characterize the as-milled powder and leached specimens. The saturation magnetization M_s decreased approximately 15 times than that of the powder before milling. Magnetization sharply increased to approximately 580 °C, when cooling of the specimen from 750 °C. The broad peaks of the magnetization shifted towards a lower-temperature side and the peak intensity increased, with increasing external field. The irreversibility between the field-cooling (FC) and zero-field cooling (ZFC) for the specimen begins greatly above the wide ZFC magnetization maximum and occurs at relatively high temperature. The magnetization is higher at lower temperatures, with increasing external field.     

Investigations on structural and magnetic properties of cobalt ferrite/silica nanocomposites prepared by the coprecipitation method

Magnetic nanocomposites consisting of cobalt ferrite nanoparticles embedded in silica matrix were prepared by the coprecipitation method using metallic chlorides as precursors for ferrite. Subsequently composites were annealed at 100, 200 and 300 °C for 2 h. The samples were structurally characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). The magnetic properties were measured in the temperature range of 10-300 K using vibrating sample magnetometer (VSM). The effects of thermal treatment on structural and magnetic properties of nanocomposites were investigated. When the samples were annealed, CoFe₂O₄ nanocrystallites were observed in the SiO₂ matrix, whose size increases with increase in annealing temperature. The coercivity and saturation magnetization of nanocomposite (annealed at 300 °C for 2 h) are much higher than that of bulk cobalt ferrite. The realization of adjustable particle sizes and controllable magnetic properties makes the applicability of the CoFe₂O₄ nanocomposite more versatile.     

Magnetic properties in Fe-doped NiO synthesized by co-precipitation

The magnetic properties of 1.5 at% Fe-doped NiO bulk samples were investigated. The samples were prepared by sintering the corresponding precursor in air at temperatures between 400 and 800 °C for 6 h. The synthesis was by a chemical co-precipitation and post-thermal decomposition method. In order to allow a comparison, a NiO/0.76 at% NiFe₂O₄ mixture was also prepared. The X-ray diffraction pattern shows that the samples that were sintered at 400 and 600 °C remain single phase. As the sintering temperature increased to 800 °C, however, the sample becomes a mixture of NiO and NiFe₂O₄ ferrite phases. The samples were investigated by measuring their magnetization as a function of magnetic field. The samples sintered between 400 and 800 °C and the one mixed directly with NiFe₂O₄ nanoparticles show a coercivity value of H_c≈200, 325, 350 and 110 Oe, respectively. The magnetic properties of the samples depend strongly on the sintering temperature. Simultaneously, the field-cooling hysteresis loop shift also observed after cooling the sample sintered at 600 °C to low temperature suggests the possibility of the existence of a ferromagnetic/antiferromagnetic exchange coupling.     

Enhancement of saturation magnetization in Cr-ion implanted silicon by high temperature annealing

Magnetic properties and microstructure of Cr-implanted Si have been investigated by alternating gradient magnetometer (AGM), superconducting quantum interference device (SQUID) magnetometer, and transmission electron microscopy (TEM). p-Type (1 0 0) Si wafers were implanted at 200 keV at room temperature with a dosage of 1 × 10¹⁶ cm⁻² Cr ions and then annealed at 600-900 °C for 5 min. The effect of annealing on the structure and magnetic properties of Cr-implanted Si is studied. The as-implanted sample shows a square M-H loop at low temperature. Magnetic signal becomes weaker after short time annealing of the as-implanted sample at 600 °C, 700 °C, and 800 °C. However, the 900 °C annealed sample exhibits large saturation magnetization at room temperature. TEM images reveal that the implanting process caused amorphization of Si, while annealing at 900 °C led to partial recovery of the crystal. The enhancement of saturation magnetization can be explained by the redistribution and accumulation of Cr atoms in the vacancy-rich region of Si during annealing.     

Phase formation and change of magnetic properties in mechanical alloyed Ni0.5Co0.5Fe2O4 by annealing

The effects of milling time and annealing temperature on phase formation, microstructure and magnetic properties of nickel-cobalt ferrite synthesized from oxide precursors by mechanical alloying were studied. The study of milling time effects on phase formation of milled materials showed that if milling continues up to 55 h, single phase nano-sized nickel-cobalt ferrite is obtained. Also, magnetic properties of powders versus milling time and annealing at different temperatures extensively changed, so that annealing at 1200 °C increased the magnetization saturation of the as-milled powder from 15.1 to 53.6 emu/g. X-ray powder diffraction technique (XRD) with Cu-Ka radiation was employed for phase identification. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were also used to determine the morphology and size of the particles. The magnetic properties were measured by a vibration sample magnetometer (VSM).     

Formation of a magnetic composite by reduction of Co-Nd doped strontium hexaferrite in a hydrogen gas flow

Co-Nd strontium hexaferrite nanoparticles synthesized by the self-combustion method were treated in a hydrogen flow at different temperatures and times. The samples were characterized structurally by scanning electron microscopy and X-ray diffraction and magnetically with a vibrating sample magnetometer. Phase identification showed decomposition of the hexaferrite structure into Fe₃O₄ and different strontium mixed oxides. The sample treated at 500 °C for 30 minutes shows good magnetic properties due to the formation of a magnetite/hexaferrite composite. In this case magnetization is very close to the original sample while the coercivity slightly diminishes. The hexagonal phase is almost completely transformed into different oxides at a reducing temperature of 500 °C for 120 minutes. The obtained results are analyzed in terms of the phase composition and of the magnetic susceptibility of the studied samples.     

Magneto-optical study of slanted Co nanowires embedded in CeO2/SrTiO3(0 0 1)

Sequential pulsed laser deposition of CoO and CeO₂ at 650 °C under vacuum leads to the formation of a slanted Co nanowires assembly embedded in CeO₂/SrTiO₃(0 0 1) epilayers. High temperature magneto-optical Faraday measurements were performed, which revealed a Faraday ellipticity of 1.3° at a wavelength of 450 nm for 300 nm thick samples and which allowed to access the magnetic properties. From the analysis of the coercivity dependence on temperature, it is shown that the magnetic anisotropy of the slanted Co nanowires is dominated by shape anisotropy and that their magnetization reversal is localized.     

Sol-gel derived nanoparticles of Zn substituted lithium ferrite (Li0.32Zn0.36Fe2.32O4): magnetic and Mössbauer effect measurements and their theoretical analysis

Nanoparticles of Zn substituted lithium ferrite (Li_0.32Zn_0.36Fe_2.32O₄) have been prepared by a sol-gel method where the ultra-sonication technique has been adopted to reduce the agglomeration effect among the nanoparticles. The samples were heat-treated at three different temperatures and the formation of the nanocrystalline phase was confirmed by X-ray diffractograms (XRD). The average particle size of each sample has been estimated from the (311) peak of the XRD pattern using the Debye-Scherrer formula and the average sizes are in the range of 10-21 nm. The average particle size, crystallographic phase, etc. of some selected samples obtained from the high-resolution transmission electron microscopy are in agreement with those estimated from the XRD patterns. Static magnetic measurements viz., hysteresis loops, field cooled and zero field cooled magnetization versus temperature curves of some samples carried out by SQUID in the temperature range of 300 to 5 K clearly indicate the presence of superparamagnetic (SPM) relaxation of the nanoparticles in the samples. The maximum magnetization of the SPM sample annealed at 500 °C is quite high (68 Am²/Kg) and the hysteresis loops are almost square shaped with very low value of coercive field at room temperature (827.8 A/m). The particle size, magneto-crystalline anisotropy, etc. have been estimated from the detailed theoretical analysis of the static magnetic data. The dynamic magnetic behavior of the samples was also investigated by observing the ac hysteresis loops and magnetization versus field curves with different time windows at room temperatures. The different soft magnetic quantities viz., coercive field, magnetization, remanance, hysteresis losses, etc. were extracted from dynamic measurements. Dynamic measurements confirmed that the samples are in their mixed state of SPM and ordered ferrimagnetic particles, which is in good agreement with the results of static magnetic measurements. Mössbauer spectra of the samples recorded at room temperature (300 K) and at different temperatures down to 20 K confirmed the presence of the SPM relaxation of the nanoparticles of the samples.     

Effects of deposition temperature on the structural and morphological properties of SnO2 films fabricated by pulsed laser deposition

Tin oxide (SnO₂) thin films were grown on Si (1 0 0) substrates using pulsed laser deposition (PLD) in O₂ gas ambient (10 Pa) and at different substrate temperatures (RT, 150, 300 and 400 °C). The influence of the substrate temperature on the structural and morphological properties of the films was investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). XRD measurements showed that the almost amorphous microstructure transformed into a polycrystalline SnO₂ phase. The film deposited at 400 °C has the best crystalline properties, i.e. optimum growth conditions. However, the film grown at 300 °C has minimum average root mean square (RMS) roughness of 3.1 nm with average grain size of 6.958 nm. The thickness of the thin films determined by the ellipsometer data is also presented and discussed.     

Improvement of the magnetic properties of Nd9.5Fe81Zr3B6.5 nanocomposite magnets by semi-melt spinning

Nd_9.5Fe₈₁Zr₃B_6.5 ribbons are prepared by single roller melt-spinning technique at 1150 °C which is in the solid and liquid coexistence zone. The phase evolution and magnetic properties were studied by X-ray diffraction, differential scanning calorimetry, transmission electron microscopy observations, and magnetization measurements. The experimental results show that in comparison to the ribbons quenching at higher temperature, the thickness of ribbons prepared at 1150 °C are insensitive to the wheel speed and an uniform nanoscale structure with fine grains can be obtained directly from the semi-melt and the exchange coupling interaction between the grains was enhanced for the nanocomposite permanent alloy which can contributed to excellent magnetic properties.     

Evolution of structural and magnetic properties of sputtered nanocrystalline Co thin films with thermal annealing

Ultrafine grain films of cobalt prepared using ion-beam sputtering have been studied using X-ray diffraction (XRD), X-ray reflectivity (XRR), atomic force microscopy (AFM) and magneto-optical Kerr effect (MOKE) measurements. As-prepared films have very smooth surface owing to the ultrafine nature of the grains. Evolution of the structure and morphology of the film with thermal annealing has been studied and the same is correlated with the magnetic properties. Above an annealing temperature of 300 °C, the film gradually transforms from HCP to FCC phase that remains stable at room temperature. A significant contribution of the surface energy, due to small grain size, results in stabilisation of the FCC phase at room temperature. It is found that other processes like stress relaxation, grain texturing and growth also exhibit an enhanced rate above 300 °C, and may be associated with an enhanced mobility of the atoms above this temperature. Films possess a uniaxial anisotropy, which exhibits a non-monotonous behaviour with thermal annealing. The observed variation in the anisotropy and coercivity with annealing can be understood in terms of variations in the internal stresses, surface roughness, and grain structure.     

Influence of Si-N interlayer on the microstructure and magnetic properties of γ′-Fe4N films

The (γ′-Fe₄N/Si-N)_n (n: number of layers) multilayer films and γ′-Fe₄N single layer film synthesized on Si (1 0 0) substrates by direct current magnetron sputtering were annealed at different temperatures. The structures and magnetic properties of as-deposited films and films annealed at different temperatures were characterized using X-ray diffraction, scanning electron microscopy and vibrating sample magnetometer. The results showed that the insertion of Si-N layer had a significant influence on the structures and magnetic properties of γ′-Fe₄N film. Without the addition of Si-N lamination, the iron nitride γ′-Fe₄N tended to transform to α-Fe when annealed at the temperatures over 300 °C. However, the phase transition from γ′-Fe₄N to ?-Fe₃N occurred at annealing temperature of 300 °C for the multilayer films. Furthermore, with increasing annealing temperature up to 400 °C or above, ?-Fe₃N transformed back into γ′-Fe₄N. The magnetic investigations indicated that coercivity of magnetic phase γ′-Fe₄N for as-deposited films decreased from 152 Oe (for single layer) to 57.23 Oe with increasing n up to 30. For the annealed multilayer films, the coercivity values decreased with increasing annealing temperature, except that the film annealed at 300 °C due to the appearance of phase ?-Fe₃N.