Synthesis and characterization of Sr(ZnZr)x Fe12−2xO19-PANI composites

Strontium zinc zirconium hexaferrites/polyaniline (Sr(ZnZr)_xFe_12−2xO₁₉-PANI, x=0, 0.5, 1.0) composites were synthesized by oxidative chemical polymerization of aniline in the presence of ammonium peroxydisulfate (APS). The structure and morphology of the product was characterized by FTIR, TGA and SEM. The particle size of the core material was found to be about 250-500 nm. After coating with polyaniline, the particle size of Sr(ZnZr)_0.5Fe₁₁O₁₉-PANI composites grew upto 0.5-1.0 μm. XRD of the ferrites indicated that the structure of the core materials is hexagonal, with lattice constants around 5.886-5.885 Å. It was found that the saturation magnetization (M_S) and coercivity (H_C) for Sr(ZnZr)_xFe_12−2xO₁₉-PANI composites decreased after polyaniline coating. The composite under applied magnetic field, exhibited ferromagnetic hysteretic loops with high saturation magnetization (M_S=18.9-3.8 emu/g) and coercivity (H_C=3850.0-583.91 Oe).     

Superparamagnetism and spin-glass like state for the MnFe2O4 nano-particles synthesized by the thermal decomposition method

MnFe₂O₄ nano-particles with an average size of about 7 nm were synthesized by the thermal decomposition method. Based on the magnetic hysteresis loops measured at different temperatures the temperature-dependent saturation magnetization (M_S) and coercivity (H_C) are determined. It is shown that above 20 K the temperature-dependence of the M_S and H_C indicates the magnetic behaviors in the single-domain nano-particles, while below 20 K, the change of the M_S and H_C indicates the freezing of the spin-glass like state on the surfaces. By measuring the magnetization–temperature (M–T) curves under the zero-field-cooling (ZFC) and field-cooling procedures at different applied fields, superparamagnetism behavior is also studied. Even though in the ZFC M–T curves peaks can be observed below 160 K, superparamagnetism does not appear until the temperature goes above 300 K, which is related with the strong inter-particle interaction.     

Magnetic properties and room-temperature magnetocaloric effect in the doped antipervoskite compounds Ga1−xAlxCMn3 (0≤x≤0.15)

We report the effects of Al doping on the structure, magnetic properties, and magnetocaloric effect of antiperovskite compounds Ga_1−xAl_xCMn₃ (0≤x≤0.15). Partial substitutions of Al for Ga enhance the Curie temperature (from 250 K for x=0.0 to 312 K for x=0.15) and the saturation magnetization. On increasing the doping level x, the maximum values of the magnetic entropy change (−ΔS_M) decreases while the temperature span of −ΔS_M vs. T plot broadens. Furthermore, the relative cooling power (RCP) is also studied. For 20 kOe, the RCP value tends to saturate at a high doping level (for x=0.12, 119 J/kg at 296 K). However, at 45 kOe, the RCP value increases quickly with increasing x (for x=0.15, 293 J/kg at 312 K). Considering the relatively large RCP and inexpensive raw materials, Ga_1−xAl_xCMn₃ may be alternative candidates for room-temperature magnetic refrigeration.     

Structural and magnetic properties of holmium substituted cobalt ferrites synthesized by chemical co-precipitation method

CoHo_xFe_2−xO₄ ferrites (x=0.00–0.1) were prepared by the co-precipitation technique and the effect of holmium substitution on the magnetic properties was investigated. X-ray diffraction reveals that the substituted samples show a second phase of HoFeO₃ along with the spinel phase. The magnetic properties such as the saturation magnetization (M_s), coercivity (H_c) and remanence (M_r) are obtained from the hysteresis loops. It is observed that the M_s decreases while H_c increases with Ho³⁺ substitution. The decrease of saturation magnetization is attributed to the weakening of exchange interactions. The coercivity increases with increase of the Ho³⁺ concentration, which is attributed to the presence of an ultra-thin layer at the grain boundaries that impedes the domain wall motion. Low field AC susceptibility was also measured over the temperature range 300–600 K at the frequency of 200 Hz. It decreases with the increase of temperature following the Curie–Weiss law up to the Curie temperature. Above the Curie temperature it shows paramagnetic behavior. The increase in coercivity suggests that the material can be used for applications in perpendicular recording media.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

Structure,analysis and some magnetic properties for low temperature fired Ni–Cu ferrite

Cu²⁺ ions substituted Ni-ferrite having the general formula Ni_1-xCu_xFe₂O₄ (where x=0.0, 0.2, 0.4 and 0.6) were prepared by the sintering ceramic method. X-ray diffraction, infrared spectra and magnetization of the above ferrite were carried out to investigate structural and magnetic characterization of this ferrite. Crystallite size, lattice parameters, positional oxygen parameter and ionic radii for both tetrahedral and octahedral sites were calculated. The experimental lattice parameter was found to vary between 8.3856 and 8.3865 Å. The infrared spectra were measured in the frequency range 650–150 cm⁻¹. Two prominent bands were observed, high frequency band ν₁ and low frequency band ν₂ were assigned to tetrahedral and octahedral sites. Bond length and force constant were also calculated for both tetrahedral and octahedral sites. The effect of Cu concentration on, saturation magnetization, coercivity ratio and magnetic moment were investigated using vibrating sample magnetometer (VSM). It was found that both saturation magnetization (M_S) and coercivity (H_c) decreases with increasing in Cu content.     

Crystal structure and magnetic properties of hard magnetic Sm2Fe17Nδ thin films with Co substitution

The crystal structure and magnetic properties of the hard magnetic Sm₂(Fe_1−xCo_x)₁₇N_δ thin films prepared by dc magnetron sputtering and subsequent nitrogenation process were investigated. It is found that the N content and crystal structure determine the non-monotonic dependence of the coercivity H_C on nitriding temperature for the films with x=0. With nitriding temperature exceeding 300 °C, N atoms can enter the Sm₂Fe₁₇ phase and the N content increases with increasing nitriding temperature, which leads to an increased coercivity. However, the maximum value of the H_C is observed at 400 °C. The α-Fe soft phase appears with nitriding temperature further increasing to 500 °C, which is responsible for the decreased H_C. When x is between 0 and 0.36, the films exhibit single Th₂Zn₁₇-type structure. Co atoms are found to go into the lattice of the 2:17 phase, generating an enhanced exchange coupling interaction between the nano-grains, which is responsible for the improved hard magnetic properties of the films with Co substitution at a certain range. Especially, the optimal value of the coercivity H_C and remanence ratio M_R/M_S reaches 4.0 kOe and 0.70 for the films with x=0.17 and 0.36, respectively.     

Improvement in magnetic properties of La substituted BaFe12O19 particles prepared with an unusually low Fe/Ba molar ratio

In this study, effect of lanthanum substitution on the phase composition, lattice parameters and magnetic properties of barium hexaferrite has been studied in samples synthesized in ammonium nitrate melt. Samples, prepared with different lanthanum amount and having various initial Fe/(Ba+La) ratios in between 12 and 2 {(Ba_1−xLa_x)·n Fe₂O₃, where 0≤x≤1 and 1≤n≤6)}, are sintered at temperatures from 800 to 1200 °C. The lattice parameters, both a and c, decreases with increasing La amount which results in a decrease of the unit cell volume. The scanning electron microscope micrographs show that the pure and La-substituted sample with x=0.3, both calcinated at 1000 °C, have grain sizes smaller than 1 μm. The coercivities of the La-substituted samples increase with increasing La amount and reaches to a maximum value of 5.73 kOe, when x=0.3. Sintering at higher temperatures (above 1000 °C) decreases the coercivity, resembling a transition from single to multi-domain behavior of the particles, while saturation magnetization of the samples continues to increase due to the increasing grain size. Magnetization measurements of the samples prepared with different Fe/(Ba+La) molar ratios, n's, revealed that the specific saturation magnetization slightly increases with decreasing n, while coercivities fluctuates around 5.5 kOe. However, a sharp increase in the saturation magnetization has been observed in the sample having n=1 and washed in HCl. It was measured as 59.2 emu/g at 15 kOe, which is higher than that of the pure sample (57.5 emu/g). Thus, the magnetic parameters are optimized in the sample Ba_0.7La_0.3Fe₁₂O₁₉ so as to maximize both coercivity and specific saturation magnetization in the HCl-washed sample synthesized by starting with an unusually low Fe/(Ba+La) molar ratio of 2 (or n=1).     

Magnetic and Microwave Absorbing Properties of Electrospun Ba(1−x)LaxFe12O19 Nanofibers

Ba_(1−x)La_xFe₁₂O₁₉ (0.00≤x≤0.10) nanofibers were fabricated via the electrospinning technique followed by heat treatment at different temperatures for 2 h. Various characterization methods including scanning electron microscopy (SEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and microwave vector network analyzer were employed to investigate the morphologies, crystalline phases, magnetic properties, and complex electromagnetic parameters of nanofibers. The SEM images indicate that samples with various values of x are of a continuous fiber-like morphology with an average diameter of 110±20 nm. The XRD patterns show that the main phase is M-type barium hexaferrite without other impurity phases when calcined at 1100 °C. The VSM results show that coercive force (H_c) decreases first and then increases, while saturation magnetization (M_s) reveals an increase at first and then decreases with La³⁺ ions content increase. Both the magnetic and dielectric losses are significantly enhanced by partial substitution of La³⁺ for Ba²⁺ in the M-type barium hexaferrites. The microwave absorption performance of Ba_0.95La_0.05Fe₁₂O₁₉ nanofibers gets significant improvement: The bandwidth below −10 dB expands from 0 GHz to 12.6 GHz, and the peak value of reflection loss decreases from −9.65 dB to −23.02 dB with the layer thickness of 2.0 mm.     

The influence of Nd-Co substitution on the magnetic properties of non-stoichiometric strontium hexaferrite nanoparticles

Non-stoichiometric Nd-Co substituted hexaferrites of composition Sr_1−xNd_xFe_12(1−x)Co_xO₁₉ (x=0-0.4) were prepared by the self-propagating combustion method and subsequent heat treatments. Structural characterization of samples showed that the M-type hexagonal structure can be maintained for substitutions x<0.4 without the segregation of secondary phases on samples calcined at 1100 °C. The crystallites sizes range between 50 and 70 nm. Mössbauer spectroscopy results indicate that the iron vacancies are not evenly distributed over the lattice and that Co/Fe substitution mainly takes place in site 4f2. Magnetic measurements reveal that values of saturation magnetization M_S increased from 72 to 76 Am²/kg (x=0-0.2), while coercivity H_c increased from 26.40 to 58.70 A/m (x=0-0.3). Nd-Co substitutions enhance magnetic properties in deficient iron Sr hexaferrites.     

Synthesis and surface modified hard magnetic properties in Co0.5Pt0.5 nanocrystallites from a rheological liquid precursor

Small crystallites of a metastable phase Co_0.5Pt_0.5 are precipitated by heating a rheological liquid precursor of cobalt–hydrazine complex and platinum chloride H₂PtCl₆·xH₂O in polymer molecules of poly(vinylpyrrolidone) (PVP) in ethylene glycol. The hydrazine co-reduces nascent atoms from the Co²⁺ and Pt⁴⁺ that recombine and grow as Co_0.5Pt_0.5. The PVP molecules cap a growing Co_0.5Pt_0.5 as it achieves a critical size so that it stops growing further in given conditions. X-ray diffraction pattern of a recovered powder reveals a crystalline Co_0.5Pt_0.5 phase (average crystallite size D∼8 nm) of a well-known Fm3m-fcc crystal structure with the lattice parameter a=0.3916 nm (density ρ=14.09 g/cm³). A more ordered L1₀ phase (ρ=15.91 g/cm³) transforms (D≥25 nm) upon annealing the powder at temperature lesser than 700 °C (in vacuum). At room temperature, the virgin crystallites bear only a small saturation magnetization M_s=5.54 emu/g (D=8 nm) of a soft magnet and it hardly grows on bigger sizes (D≤31 nm) in a canted ferromagnetic structure. A rectangular hysteresis loop is markedly expanded on an optimally annealed L1₀ phase at 800 °C for 60 min, showing a surface modified coercivity H_c=7.781 kOe with remnant ratio M_r/M_s=0.5564, and M_s=39.75 emu/g. Crystallites self-assembled in an acicular shape tailor large H_c from ideal single domains and high magnetocrystalline anisotropy of a hard magnet L1₀ phase.     

Structural and magnetic behaviour of aluminium doped barium hexaferrite nanoparticles synthesized by solution combustion technique

Nanocrystalline M-type Al³⁺ substituted barium hexaferrite samples having generic formula BaFe_12−xAl_xO₁₉ (where x=0.00, 0.25, 0.50, 0.75, 1.00) were synthesized by the solution combustion technique. The precursors were prepared using stoichiometric amounts of Ba²⁺, Fe³⁺ and Al³⁺ nitrate solutions with citric acid as a chelating agent. The barium nitrate to citric acid ratio was taken as 1:2 and pH of the solution was kept at 8. The sintered samples were characterized by XRD, EDAX, SEM, TEM and VSM techniques. Pure barium hexaferrite shows only single phase hexagonal structure while samples at 0.25≤x≥1.00 show α-Fe₂O₃ peaks with M-phase of barium hexaferrite in the X-ray diffraction pattern. The lattice parameters (a and c) obtained from XRD data decreases with increase in aluminium content x. The particle size obtained from X-ray diffraction data is in the nanometer range. The magnetic behaviour of the samples was studied using vibrating sample magnetometer technique. The saturation magnetization (M_s) and magneton number (n_B) decrease from 38.567 to 21.732 emu/g and from 7.6752 to 4.2126μ_B, respectively, with increase in Al³⁺ substitution x from x=0.0 to 1.0.     

Structure and RT ferromagnetism of Fe-doped AlN films

Al_1−xFe_xN_1−δ thin films with 0 ≤ x ≤ 13.6% were deposited by dc magnetron co-sputtering at room temperature (RT). It is found that Fe atom will substitutes the Al atom in the lattice when x ≤ 1.2%, while it will embed into the interstice of the lattice at larger Fe content. RT ferromagnetism was observed in all doped samples. A maximum saturated magnetization 2.81 emu/cm³ of the film is found to be induced by AlFeN ternary alloy when x = 1.2%.     

Effect of boric acid on structure,morphology and luminescent properties of divalent europium doped calcium aluminate phosphors

Blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ were prepared by high temperature solid-state method. Their structure, morphology and luminescent properties were investigated by X-ray diffraction (XRD), scanning electron microscope (SEM) and fluorescence spectroscopy. The effect of different amounts of fluxing agent H₃BO₃ on structure, morphology and luminescent properties of blue phosphors Ca_1 − xAl₂O₄: xEu²⁺ luminous intensity caused by different amount of H₃BO₃ was also investigated. The amount of H₃BO₃ doped Ca_1 − xAl₂O₄: xEu²⁺ in optimal luminous intensity had been determined. The results showed that both the excitation and emission spectra of samples were all broad bands, and that the peak of emission spectra was near 442 nm, which was corresponding to the 4f⁶5d → 4f⁷ transition of Eu²⁺ illuminating blue light. Ca_1 − xAl₂O₄: xEu²⁺ (x = 3.5 mol%) could be gained with good morphology and the best luminous intensity when H₃BO₃ mass ratio was 0.5 wt%.     

Thiolated cyclodextrin self-assembled monolayer-like characterized with secondary ion mass spectrometry

In the work the focus is on the preparation of self-assembled monolayer-like films consisting of thiolated cyclodextrin on gold substrate and a characterization by using secondary ion mass spectrometry. The short (1 min) and long (1 h) time preparations of self-assembled monolayer-like films, resulting in submonolayer and monolayer regimes, are investigated, respectively. The observed species of thiolated cyclodextrin (M as molecular ion) self-assembled monolayer-like films are assigned to three groups: Au_xH_yS_z clusters, fragments with origin in cyclodextrin molecule associated with Au, and molecular ions. The group of Au_xH_yS_z (x = 2-17, y = 0-2, z = 1-5) clusters have higher intensities than other species in the positive and even more in negative mass spectra. Interestingly, the dependence between the number of Au and S atoms shows that with the increasing size of Au_xH_yS_z clusters up to 11 Au atoms, the number of associated S atoms is also increasing and then decreasing. Molecular species as (M−S+H)Na⁺, (M+H)Na⁺, AuMNa⁺, (M₂−S)Na⁺, and M₂Na⁺ are determined, and also in cationized forms with K⁺. The intensities of thiolated cyclodextrin fragments at the long time preparation are approximately 10 times higher than the intensities of the same fragments observed at the short time. The largest observed ions in thiolated cyclodextrin self-assembled monolayer-like films are AuM₂ and Au₂M. The thiolated cyclodextrin molecular ions are compared with hexadecanethiol molecular ions in the form of Au_xM_w where the values of x and w are smaller for thiolated cyclodextrin than for hexadecanethiol. This result is supported with larger, more compact, and more stabile thiolated cyclodextrin molecule.     

Effect of sputtering process on magnetic properties and crystal structure of Sm2Fe17Nx thin films

Hard magnetic Sm₂Fe₁₇N_x thin films were prepared by dc magnetron sputtering and subsequent nitrogenation process. The results show that the sputtering parameters determine the film composition, which determines the crystal structure and magnetic properties. When the gas pressure varies from 1.2 to 2.1 Pa and power varies from 40 to 60 W, higher Sm content (>11.3 at%) is obtained, giving rise to improved coercivity H_C and remanence ratio M_R/M_S. The optimal H_C of 2127.8 Oe and M_R/M_S of 0.53 are obtained when the gas pressure and power reach 1.2 Pa and 50 W, respectively. In addition, it is found that the pure single Sm₂Fe₁₇ phase can be observed when the ratio of Fe/Sm exceeds 7.1 by controlling the sputtering parameters to adjust the composition.     

Structures, magnetic properties, and magnetocaloric effect in MnCo1−xGe (0.02?x?0.2) compounds

The crystalline structures, magnetic properties and magnetocaloric effect (MCE) of MnCo_1−xGe alloys (0.02?x?0.2) have been reported. The crystalline structures of MnCo_1−xGe (x?0.06) alloys are mainly of TiNiSi-type phase, and Ni₂In-type structure dominates for x>0.06. With decreasing Co concentrations the saturated magnetization of these compounds decreases. Large low-field magnetic entropy change −ΔS_M of about 2.3 J/kg K in MnCo_0.94Ge alloy has been obtained for a magnetic field change of 1 T. Moreover, it is found that TiNiSi-type phase exhibits larger −ΔS_M than Ni₂In-type one. For MnCo_0.94Ge alloy, considerable low-field refrigerant capacity (RC) (∼460 mJ/cm³), low coercivity and easy synthesis make these alloys potential candidates for near-room temperature magnetic refrigerants.     

In-plane magnetization with high coercivity in terbium iron garnet thin films deposited on Pt/Si substrate by PLD

We report on the growth of terbium iron garnet (TbIG, Tb₃Fe₅O₁₂) thin films having anomalously large coercivity and in-plane easy axis of magnetization. The TbIG thin films were prepared at room temperature (RT) on Pt/Si(1 0 0) substrates by pulsed laser deposition technique. The films deposited at RT were X-ray amorphous and do not show any magnetic order. Annealing of the RT deposited film at 900 °C resulted into fully textured (532) TbIG film. Atomic force microscopy and cross-sectional scanning electron microscopy studies of the TbIG films showed good surface quality with an average surface roughness of 5.0 nm and thickness of about 300 nm, respectively. The M-H loops measured at 20 K for TbIG films, exhibit about an order of magnitude enhancement in the coercivity value (H_c) than the single crystal. In-plane and out-of-plane M-H loops revealed that the easy axis of the magnetization lies within the film’s plane. In-plane magnetization combining with large H_c value of the TbIG thin film may be of scientific interest for the possible applications.     

Effects of the Hf content on the microstructure and magnetic properties of Co-Hf-Ta thin films

Effects of the Hf content in Co-Hf-Ta thin films on the microstructure and magnetic properties were investigated in this study. It was found that appropriate Hf addition can effectively refine the Co grain size. Co grain sizes sharply decreased from 50 nm down to 2.3 nm with increasing the Hf content from 1.02 at.% to 2.81 at.%, leading to the reduced magneto-crystalline anisotropy. The Co-Hf-Ta thin films with small Co grains reveal low anisotropy field, low coercivity, and high resistivity. By optimizing the Hf content, the film with Hf concentration of 2.81 at.% exhibits excellent soft magnetic properties: high saturation magnetization (4πM_S ∼ 13.6 kG), and low coercivity (H_C ∼ 0.6 Oe). The effective permeability of the film reaches 800 and remains constant up to 1 GHz.     

Effects of Zr-substitution on microstructure and properties of YCaVIG ferrites

Y_2.6−xCa_0.4+xZr_xV_0.2Fe_4.8−xO₁₂ (Zr_x:YCaVIG) ferrite materials have been prepared by an oxide process. The phase formation and microstructure were analyzed by X-ray diffraction and scanning electron microscopy, respectively. The effects of Zr⁴⁺ substitution on phase compositions, sintering properties, microstructures and electromagnetic properties were investigated. The results indicate that all the sintered specimens with different Zr⁴⁺ contents show a single garnet structure. The addition of ZrO₂ can gradually increase the lattice constant, and lower the sintering temperature and the theoretical density. With the increase of Zr⁴⁺ content, the dielectric loss (tan δ_ε) and coercivity (H_c) decrease and then slightly increase, which is due to the variation of the microstructure. But the saturation magnetization (4πM_s) shows the opposite variation compared to the former two properties. However, the dielectric constant (ε_r) remains stable and remanence (B_r) monotonically declines. Finally, the specimen of Y_2.3Ca_0.7Zr_0.3V_0.2Fe_4.5O₁₂ sintered at 1350° possesses the optimum electromagnetic properties: ε_r=14.8, tan δ_ε=1.35×10⁻³, 4πM_s=1638 Gs, B_r=596 Gs, H_c=0.75 Oe and ΔH (ferromagnetic resonance linewidth)=66 Oe.