Magnetic response of NiFe2O4 nanoparticles in polymer matrix

We report the magnetic properties of magnetic nano-composite, consisting of different quantity of NiFe₂O₄ nanoparticles in polymer matrix. The nanoparticles exhibited a typical magnetization blocking, which is sensitive on the variation of magnetic field, mode of zero-field-cooled/field-cooled experiments and particle quantity in the matrix. The samples with lower particle quantity showed an upturn of magnetization down to 5 K, whereas the blocking of magnetization dominates at lower temperatures as the particle quantity increases in the polymer. We examine such magnetic behaviour in terms of the competitive magnetic ordering between core and surface spins of nanoparticles, taking into account the effect of inter-particle (dipole-dipole) interactions on nanoparticle magnetic dynamics.     

Monte Carlo simulation of magnetic multi-core nanoparticles

In this paper, a Monte Carlo simulation is carried out to evaluate the equilibrium magnetization of magnetic multi-core nanoparticles in a liquid and subjected to a static magnetic field. The particles contain a magnetic multi-core consisting of a cluster of magnetic single-domains of magnetite. We show that the magnetization of multi-core nanoparticles cannot be fully described by a Langevin model. Inter-domain dipolar interactions and domain magnetic anisotropy contribute to decrease the magnetization of the particles, whereas the single-domain size distribution yields an increase in magnetization. Also, we show that the interactions affect the effective magnetic moment of the multi-core nanoparticles.     

Low-temperature first-order reversal curves and interaction effects on assemblies of iron oxide nanoparticles

We present the synthesis and magnetic properties of high quality uncoated and gold-coated iron oxide magnetic nanoparticles. The structural properties of these nanoparticles are investigated by transmission electron microscopy, UV-visible spectroscopy and X-ray diffraction. Experimental results and theoretical simulations indicate that the synthesized nanoparticles present a very good monodispersity, and well defined size and shape. The coercive field of these particles is identified by low-temperature first-order reversal curves and the results used in order to fit zero-field-cooled magnetization processes with theoretical models. The identification of the parameters in this analysis suggests that the coating process hardly affects the morphology and the overall magnetic properties of the cores inside coated particles.     

Structural, static and dynamic magnetic properties of dextran coated γ-Fe(2)O(3) nanoparticles studied by (57)Fe NMR, M?ssbauer, TEM and magnetization measurements

The structural and magnetic properties and spin dynamics of dextran coated and uncoated γ-Fe(2)O(3) (maghemite) nanoparticles have been investigated using high resolution transmission electron microscopy (HRTEM), (57)Fe nuclear magnetic resonance (NMR), M?ssbauer spectroscopy and dc magnetization measurements. The HRTEM observations indicated a well-crystallized system of ellipsoid-shaped nanoparticles, with an average size of 10 nm. The combined M?ssbauer and magnetic study suggested the existence of significant interparticle interactions not only in the uncoated but also in the dextran coated nanoparticle assemblies. The zero-field NMR spectra of the nanoparticles at low temperatures are very similar to those of the bulk material, indicating the same hyperfine field values at saturation in accord with the performed M?ssbauer measurements. The T(2) NMR spin-spin relaxation time of the nanoparticles has also been measured as a function of temperature and found to be two orders of magnitude shorter than that of the bulk material. It is shown that the thermal fluctuations in the longitudinal magnetization of the nanoparticles in the low temperature limit may account for the shortening and the temperature dependence of the T(2) relaxation time. Thus, the low temperature NMR results are in accord with the mechanism of collective magnetic excitations, due to the precession of the magnetization around the easy direction of the magnetization at an energy minimum, a mechanism originally proposed to interpret M?ssbauer experiments in magnetic nanoparticles. The effect of the surface spins on the NMR relaxation mechanisms is also discussed.     

Magnetic and magneto-optical properties of ion-synthesized cobalt nanoparticles in silicon oxide

The magnetic and magneto-optical properties of ion-synthesized cobalt nanoparticles in the amorphous silicon oxide matrix are investigated as a function of the implantation dose. The analysis of the field dependences of the magnetization and the magneto-optical Faraday and Kerr effects demonstrates that, as the ion implantation dose increases, the superparamagnetic behavior of an ensemble of cobalt nanoparticles at room temperature gives way to a ferromagnetic response with the anisotropy characteristic of a thin magnetic film. The magnetization curves for the superparamagnetic and ferromagnetic ensembles of cobalt nanoparticles are simulated to determine their average sizes and the filling density in the irradiated layer of the silicon dioxide matrix. It is revealed that the spectral dependences of the Faraday and Kerr effects for ion-synthesized cobalt nanoparticles differ substantially from those for continuous cobalt films due to the localized excitations of free electrons in the nanoparticles.     

Internal Structure and Magnetic Properties in Cobalt Ferrite Nanoparticles: Influence of the Synthesis Method

The design of novel nanostructured magnetic materials requires a good understanding of the variation in the magnetic properties due to different synthesis conditions. In this work, four different procedures for fabricating Co‐ferrite nanoparticles with similar sizes between 7 and 10 nm are compared by studying their structural and magnetic properties. Non‐aqueous methods based on the thermal decomposition of metal acetylacetonates at high temperatures, either with or without surfactants, provide highly crystalline nanoparticles with large saturation magnetization values and a coherent reversal of the magnetic moment. However, variations in the density of defects and in the shape of the nanocrystals determine the distribution of switching fields and the effective magnetic anisotropy, which reaches up to ≈1 × 10⁷ erg cm^?3 for oleic acid‐capped 9 nm nanoparticles. It is shown that the saturation magnetization values for nanoparticles produced by different methods are in the range between 49 and 95 emu g^?1 due to differences in the stoichiometry, in the cation occupancy, in the magnetic disorder and in the spin canting of the magnetic sub‐lattices, the latter evaluated by in‐field Mössbauer spectroscopy.     

Magnetic behaviour of interacting antiferromagnetic nanoparticles

Magnetic properties of interacting La(0.2)Ca(0.8)MnO(3) nanoparticles have been investigated. The field-induced transition from antiferromagnetic (AFM) to ferromagnetic (FM) state in the La(0.2)Ca(0.8)MnO(3) bulk has been observed at exceptionally high magnetic fields. For large particles, the field-induced transition widens while magnetization progressively decreases. In small particles the transition is almost fully suppressed. The thermoremanence and isothermoremanence curves constitute fingerprints of irreversible magnetization originating from nanoparticle shells. We have ascribed the magnetic behaviour of nanoparticles to a core-shell scenario with two main magnetic contributions; one attributed to the formation of a collective state formed by FM clusters in frustrated coordination at the surfaces of interacting AFM nanoparticles and the other associated with inner core behaviour as a two-dimensional diluted antiferromagnet.     

Magnetically coupled clusters in aggregated maghemite ferrofluid: Mössbauer and magnetization study

Mössbauer spectroscopy in a weak static magnetic field and measurements of isothermal magnetization loops were used to study the effect of polymer coating of the γ-Fe ₂ O ₃ nanoparticles on the magnetic properties of concentrated ensembles of such nanoparticles. It was found that the individual coating of the nanoparticles by a ～ 1 nm layer of the polymer leads to the observable changes in the shapes of the Mössbauer spectra and the magnetization curves of the ensembles. Modeling of the experimental magnetization curves in the classical Langevin model and analysis of the Mössbauer spectra in the generalized multi-level relaxation model revealed that the establishment of interparticle magnetic dipole interactions leads to both a ～ 30 % increase in the magnetic anisotropy constant and a ～ 35 % increase in the width of the hysteresis loop.     

Preparation,structural and magnetic characterization of synthetic anti-ferromagnetic (SAF) nanoparticles

Synthetic anti-ferromagnetic nanoparticles (SAFs) are a novel type of magnetic nanoparticle (MNP) fabricated using nanoimprint lithography, direct deposition of multilayer films and retrieval in liquid phase via an ‘etching’ release process. Such physical fabrication techniques enable accurate control of particle shape, size and composition. We systematically varied the processing conditions to produce different configurations of SAF nanoparticles and performed extensive characterization using transmission electron microscopy (TEM) and alternating gradient magnetometry (AGM) to study their corresponding structural and magnetic behavior. A key focus of this paper is the preparation of TEM cross-section specimens of SAF nanoparticles for their structural characterization. This is not a trivial task, but is useful and revealing in terms of structural features. A major finding from our study shows that the introduction of oxygen during deposition of the copper release layer gives significantly improved flatness of the multilayer structure but no significant change in the magnetic properties. Magnetic measurements show that these nanoparticles have nearly zero magnetic remanence, a linear response of magnetization and more than twice the saturation magnetization compared to iron oxide nanoparticles.     

Chemical synthesis of self-assembled Ni nanoparticles and understanding of nonmagnetic layer inside their surface

To chemically synthesize mono-dispersed and self-assembled Ni nanoparticles, it was important to find the best combination of a Ni precursor and a ligand. Our Ni nanoparticles exhibited a face-centered cubic structure and superparamagnetism at room temperature. The value of saturation magnetization for our Ni nanoparticles was largely different from that of bulk Ni. Because of the relationship between the diameter and saturation magnetization per volume, the number of atoms composing the Ni nanoparticle was correlated with magnetization. This result indicated that a magnetic core/shell structure inside a Ni nanoparticle was produced. The nonmagnetic layer, as a magnetic shell of the core/shell structure, was created due to the low crystallinity of Ni nanoparticles and was composed of amorphous Ni‒O states. As a result, antiferromagnetic spins arrayed in the Ni‒O states were broken. Disordered spins were generated, which eventually decreased the total magnetization of the Ni nanoparticles.     

Anomalous magnetism of the nanocrystalline oxide TiO<Subscript>2</Subscript> surface

The magnetic properties of an oxygen-deficient nanocrystalline undoped titanium dioxide synthesized by the gas-phase, electric-explosion, and chemical method have been studied. The defect state was controlled using reduction treatments in vacuum or in a hydrogen atmosphere. It is shown that the defect state of the surface of nanocrystalline oxides (for example, the existence of vacancies in the anion sublattice and other defects) has a dominant influence on the formation of the magnetic properties of the samples under study. The main contributions to the magnetism of TiO₂ nanoparticles after the reduction treatments are the paramagnetic contribution of the matrix, the paramagnetic Curie–Weiss contribution, and the contribution of the spontaneous magnetic moment provided by the existence of regions with different spin ordering. A heterogeneous magnetic state is found to exist in the TiO₂ nanopowders; for example, at low temperatures, shifted hysteresis loops are observed as a result of a possible set of magnetic states with different spin orders. It is shown that a soft compaction or grinding of nanopowders in an agate mortar lead to substantial increase in the magnetization, sometimes, by a factor of more than two, regardless of the nanopowder synthesis method and the initial phase state of TiO₂ (anatase or rutile structures). This experimental fact proves the key role of the surface defects and the magnetic moment carriers with different spin configurations localized mainly on the nanoparticle surface. The compaction changes the magnetization only in the case when the initial magnetic state has a nonlinear “quasi-superparamagnetic” character of the magnetization curve. As a result of predominant exchange interaction between the nanoparticles with a frustrated character of spin ordering on the nanoparticles surface, the ferromagnetic contribution increases as nanoparticles contact.     

Magnetic conducting composites based on polypyrrol and iron oxide nanoparticles synthesized via electrochemistry

In this work, the preparation of a polypyrrol-magnetite composite with good magnetic and electric properties is described. Firstly, the method consists of the electrochemical synthesis of magnetite nanoparticles 20 nm in diameter and narrow size distribution, and secondly, the encapsulation of the nanoparticles in a polymer matrix during its formation by chemical oxidation of the monomer. Particles appear well dispersed in the polymer matrix by transmission electron microscopy (TEM) while no degradation, in terms of nanoparticles size or magnetic properties during the polymer formation, seems to take place as it was revealed by X-ray diffraction and Mössbauer spectroscopy. Saturation magnetization increases with the amount of magnetic material present in the composite, but conductivity decreases in such a way that the amount of magnetic material was optimized to 10% with respect to the monomer to obtain a composite with high electrical conductivity and magnetic response.     

High-temperature magnetization of nanoparticles in “static” and gamma-resonance measurements in a weak magnetic field

An alternative approach to describing the magnetic dynamics of an ensemble of nanoparticles in a magnetic field is proposed, in which the precession orbits of uniform magnetization are regarded as the stochastic states of each particle. Using this approach, one can describe the nonconventional features of the high-temperature magnetization of nanoparticles that are observed in low-frequency magnetization measurements and Mössbauer spectroscopy.     

Magnetic properties, complex permittivity and permeability of FeNi nanoparticles and FeNi/AlO x nanocapsules

Structures, surface composition, magnetic properties, and electromagnetic properties of FeNi nanoparticles and FeNi/AlO _x nanocapsules were investigated. The compositions of these nanoparticles/nanocapsules were found to be quite different from those of the corresponding targets. Al atoms could promote the evaporation of Fe atoms and suppress the evaporation of Ni atoms in the arc discharge process. The protective AlO _x shell can effectively increase the resistivity of FeNi nanocapsules and suppress the growth of FeNi nanoparticles and reduce their magnetization. For FeNi nanoparticles/nanocapsules, the same natural resonance appearing at 6.4 GHz originates mainly from magnetic FeNi cores. FeNi nanoparticles/nanocapsules exhibit promising possibility for application as a new type of electromagnetic wave shield/absorbent.     

Ferromagnetic resonance observation of a phase transition in magnetic field-aligned Fe2O3 nanoparticles

Fe₂O₃ hematite (alpha) nanoparticles suspended in the liquid phase of the liquid crystal 4,4-azoxyanlsole (PAA) are cooled below the freezing temperature (397 K) in a 4000 G dc magnetic field. The in field solidification locks the direction of maximum magnetization of the particles parallel to the direction of the applied dc magnetic field removing the effects of dynamical fluctuations of the nanoparticles on the magnetic properties allowing a study of the intrinsic magnetic properties of the nanoparticles as well as the anisotropic behavior of the ferromagnetic resonance (FMR) signal. Freezing in PAA allows temperature-dependent measurements to be made at much higher temperature than previous measurements. The field position, line width and intensity of the FMR signal as a function of temperature as well as the magnetization show anomalies in the vicinity of 200 K indicative of a magnetic transition, likely the previously observed Morin transition shifted to lower temperature due to the small particle size. Weak ferromagnetism is observed below T_c in contrast to the bulk material where it is antiferromagnetic below T_c. The Raman spectrum above and below 200 K shows no evidence of a change in lattice symmetry associated with the magnetic transition.     

Ferromagnetic properties of glucose coated Cu2O nanoparticles

Magnetic properties of glucose coated cuprous oxide nanoparticles of different sizes have been studied. Unlike bulk Cu₂O, which shows diamagnetic behavior, the nanoparticles show superparamagnetic behavior. A superparamagnetic blocking temperature of 21 K is observed for 5 nm particles. A magnetic hysteresis loop with a coercivity of 406 Oe is observed for these particles at 5 K. The magnetization and the coercivity increase with decreasing particle size. The superparamagnetic behavior, along with the increase in magnetization and coercivity with decreasing particle size, is due to the enhanced surface contributions to the magnetism.     

Magnetization curves of randomly oriented ferromagnetic single-domain nanoparticles with combined symmetry of magnetic anisotropy

The magnetization curves of randomly oriented nanoparticles with combined symmetry of magnetic anisotropy were studied. The composite mode of the Stoner–Wolfarth model has been used. In terms of this model each nanoparticle is characterized by random cubic crystalline magnetic anisotropy and by random uniaxial magnetic anisotropy. The series of simulated magnetization curves have been obtained. Each curve corresponds to different contributions of cubic and uniaxial magnetic anisotropy energy to the full energy of an individual nanoparticle k_u. Within this series we discuss the values of remnant magnetization, coercive force, both initial and maximal susceptibilities as the function of k_u. It is found that the magnetic properties are not monotonous functions of k_u. We discuss the possibility of comparing the calculated magnetization curves with the experimental curves in order to obtain new information on the magnetic constant.     

Preparation and characterization of magnetic nanoparticles with controlled magnetization

The effect of molar ratio of two hydrated iron salts used as precursors into a (co)precipitation-based synthesis method, on the composition, size and specific saturation magnetization of mixed iron oxides and oxyhydroxides magnetic nanoparticles as reaction products, was studied. The preparation procedure is based on a salt-assisted solid-state chemical reaction. The obtained products are magnetic multiphase components with the mean size ranging from 3 to 10 nm and specific saturation magnetization between 25 and 95.5 emu/g. The specific saturation magnetization modifies in a non-linear manner as the molar ratio of the iron salts varies. Excepting one sample, for which Fe²⁺/Fe³⁺ molar ratio was zero, all magnetic nanoparticles show a ferrofluid-like behaviour in the colloidal form. The small size, ferrofluid-like behaviour, and controlled specific saturation magnetization allow the use of new synthesized nanoparticles in specific biomedical or industrial applications.     

Influence of the inhomogeneity of local magnetic parameters on the curves of magnetization in an ensemble of Fe<Subscript>3</Subscript>C ferromagnetic nanoparticles encapsulated in carbon nanotubes

Methods have been proposed and tested for analyzing local magnetic parameters in a system of single-domain ferromagnetic nanoparticles using their magnetization curves. The magnetic inhomogeneity in ensembles of Fe₃C nanoparticles encapsulated in carbon nanotubes has been investigated. It has been established that the Fe₃C nanoparticles encapsulated in carbon nanotubes are characterized by two-modal distribution functions of the local magnetic anisotropy energy. The particle distribution over the blocking temperature is reconstructed from the experimental temperature dependence of the coercive force. The allowance made for the inhomogeneity of the local magnetic parameters of the Fe₃C nanoparticles, which were studied by the proposed methods, explains the discrepancy between the magnetic anisotropy energy determined by the method of the magnetization approaching saturation and the magnetic anisotropy energy estimated from the coercive force of single-domain nanoparticles.     

Implications of nanoparticle concentration and size distribution in the superparamagnetic behaviour of aging-improved maghemite xerogels

Evolution of static magnetic properties of a set of enhanced γ-Fe₂O₃/SiO₂ nanocomposites with different iron concentration has been studied on the basis of their corresponding hysteresis loops, zero-field/field-cooled (ZFC/FC) magnetization curves and transmission electron microscopy images. The lack of coercivity in all compositions, as well as the fulfillment of the H/T scaling law by the magnetization above the blocking temperature of each system under study, evidence a superparamagnetic behaviour in the iron oxide nanoparticles. In order to study the influence of iron content in the unblocking processes of nanoparticles, ZFC curves under different applied magnetic fields have been fitted to a model considering the systems under study as a distribution of energy barriers. Depart from the superparamagnetic model is discussed considering interparticle interactions.