Synthesis and shape-tailoring of copper sulfide/indium sulfide-based nanocrystals

Heterostructured Cu2S-In2S3 nanocrystals with various shapes and compositions were synthesized by a high-temperature precursor-injection method using the semiconductor nanocrystal Cu1.94S as a catalyst. The intrinsic cationic deficiencies formed at high temperature by Cu ions made the Cu1.94S nanocrystal a good candidate for catalyzing the nucleation and subsequent growth of In 2S3 nanocrystals, eventually leading to the formation of heterostructured Cu2S-In2S3 nanocrystals. Gelification of the reaction systems, which were composed of different types of nanocrystal precursors and solvent, was found to be a very effective measure for controlling the growth kinetics of the heterostructured particles. Consequently, matchsticklike Cu2S3-In2S3 heterostructured nanorods, teardroplike quasi-core/shell Cu2S@In2S3 nanocrystals, and pencil-like In2S3 nanorods were successfully obtained by manipulating the gelification of the reaction system; this formed a solid experimental basis for further discussion of the growth mechanisms for differently shaped and structured nanocrystals. By reaction with 1,10-phenanthroline, a reagent that strongly and selectively binds to Cu(+), a compositional transformation from binary matchsticklike Cu2S-In2S3 nanorods to pure In2S3 nanorods was successfully achieved.     

Synthesis and characterization of CdIn(2)S(4) nanorods by converting CdS nanorods via the hydrothermal route

The ternary semiconductor CdIn(2)S(4) nanorods were synthesized by a method based on CdS nanorods via the hydrothermal route, in which CdS nanorods were converted by reaction with InCl(3) and thiourea in aqueous solution. Transmission electron microscopy (TEM) images revealed that the typical sizes of the CdIn(2)S(4) nanorods were 10-30 nm in diameter and 200-1000 nm in length. X-ray photoelectron spectra (XPS) analysis of the surface stoichiometry (CdIn(2.03)S(4.15)) and room-temperature Raman spectrum (RS) were recorded. The influences of reaction temperature, time, and sulfur sources on the formation for CdIn(2)S(4) nanorods were investigated. A possible formation mechanism of the CdIn(2)S(4) nanorods was also proposed.     

Phase transformation and optical properties of Cu-doped ZnS nanorods

ZnS nanorods doped with 0-15 mol% of Cu have been prepared by simple solvothermal process. With gradual increase in the Cu concentration, phase transformation of the doped ZnS nanorods from wurtzite to cubic was observed. Twins and stacking faults were developed due to atomic rearrangement in the heavily doped ZnS nanorods during phase transformation. UV-vis-NIR absorbance spectroscopy ruled out the presence of any impure Cu-S phase. The doped ZnS nanorods showed luminescence over a wide range from UV to near IR with peaks at 370, 492-498, 565 and 730 nm. The UV region peak is due to the near-band-edge transition, whereas, the green peak can be related to emission from elementary sulfur species on the surfaces of the nanorods. The orange emission at 565 nm may be linked to the recombination of electrons at deep defect levels and the Cu(t₂) states present near the valence band of ZnS. The near IR emission possibly originated from transitions due to deep-level defects.     

Sonochemical fabrication and characterization of stibnite nanorods

Regular stibnite (Sb(2)S(3)) nanorods with diameters of 20-40 nm and lengths of 220-350 nm have been successfully synthesized by a sonochemical method under ambient air from an ethanolic solution containing antimony trichloride and thioacetamide. The as-prepared Sb(2)S(3) nanorods are characterized by employing techniques including X-ray powder diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, and optical diffuse reflection spectroscopy. Microstructural analysis reveals that the Sb(2)S(3) nanorods crystallize in an orthorhombic structure and predominantly grow along the (001) crystalline plane. High-intensity ultrasound irradiation plays an important role in the formation of these Sb(2)S(3) nanorods. The experimental results show that the sonochemical formation of stibnite nanorods can be divided into four steps in sequence: (1) ultrasound-induced decomposition of the precursor, which leads to the formation of amorphous Sb(2)S(3) nanospheres; (2) ultrasound-induced crystallization of these amorphous nanospheres and generation of nanocrystalline irregular short rods; (3) a crystal growth process, giving rise to the formation of regular needle-shaped nanowhiskers; (4) surface corrosion and fragmentation of the nanowhiskers by ultrasound irradiation, resulting in the formation of regular nanorods. The optical properties of the Sb(2)S(3) amorphous nanospheres, irregular short nanorods, needle-shaped nanowhiskers, and regular nanorods are investigated by diffuse reflection spectroscopic measurements, and the band gaps are measured to be 2.45, 1.99, 1.85, and 1.94 eV, respectively.     

Fabrication of protein-conjugated silver sulfide nanorods in the bovine serum albumin solution

Highly ordered silver sulfide nanorods conjugated with the Bovine Serum Albumin (BSA) protein have been successfully achieved at ambient temperature. Such a process is very simple and controllable, directly using silver nitrate and thioacetamide (TAA) as the reactants in the aqueous solution of BSA. The products have been characterized by XRD, HRTEM-SAED, SEM-EDS, TG-DTA, FT-IR, and CD spectroscopy. The results of the research show that the as-prepared Ag2S nanorods are monodispersed with sizes about 40 nm in diameter and 220 nm in length, and exhibit a high degree of crystallinity and good photoluminescence. Furthermore, an interesting mechanism is discussed for the formation of the Ag2S nanorods.     

Colloidal synthesis of wurtzite Cu2ZnSnS4 nanorods and their perpendicular assembly

The quaternary copper chalcogenide Cu(2)ZnSnS(4) is an important emerging material for the development of low-cost and sustainable solar cells. Here we report a facile solution synthesis of stoichiometric Cu(2)ZnSnS(4) in size-controlled nanorod form (11 nm × 35 nm). The monodisperse nanorods have a band gap of 1.43 eV and can be assembled into perpendicularly aligned arrays by controlled evaporation from solution.     

室温氧化还原反应制备AgCuSe三元纳米棒

AgCuSe nanorods were prepared at room temperature by a redox reaction. The as-prepared product was characterized by X-ray powder diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy.X-ray powder diffraction shows that the as-prepared product is the tetragonal phase of AgCuSe. Transmission electron microscopy shows that the sample consists of nanorods with a diameter varying from 5 nm to 20 nm and a length varying from 200 nm to 600 nm. X-ray photoelectron spectroscopy shows that the purity of the sample is high. The formation mechanism of AgCuSe and the growth mechanism of AgCuSe nanorods were discussed.Thermodynamic calulations show that the final product in the synthetic system is pure AgCuSe. The solvent ethylenediamine did not only acts a didentate ligand to form relatively state Ag + and Cu + complexes, but also dissolved Se and enhanced the reactivity of Se. It played an important role in controlling the nucleation and growth of AgCuSe nanorods.     

超音速气流粉碎下NiO纳米棒的低温固相制备

采用超音速气流粉碎技术低温固相合成NiO纳米颗粒前驱体,并通过在650～900 ℃下, NaCl熔盐介质中对前驱体进行焙烧,制备得到NiO纳米棒。采用XRD、SEM、TEM测试技术对NiO前驱体、NiO纳米棒的结构和形貌进行了表征。结果表明,前驱体为直径约25 nm球形颗粒,随着焙烧温度升高,逐渐生成直径为300 nm,长度约十几微米的纳米棒。反应过程中熔盐介质是纳米颗粒前驱体生长的关键因素。     

Homoleptic copper(I) arylthiolates as a new class of p-type charge carriers: structures and charge mobility studies

Polymeric homoleptic copper(I) arylthiolates [Cu(p-SC(6)H(4)-X)](infinity) (X=CH(3) (1), H (2), CH(3)O (3), tBu (4), CF(3) (5), NO(2) (6), and COOH (7)) have been prepared as insoluble crystalline solids in good yields (75-95 %). Structure determinations by powder X-ray diffraction analysis have revealed that 1-3 and 6 form polymers of infinite chain length, with the copper atoms bridged by arylthiolate ligands. Weak intra-chain pi***pi stacking interactions are present in 1-3, as evidenced by the distances (3.210 A in 1, 3.016 A in 2, 3.401 A in 3) between the mean planes of neighboring phenyl rings. In the structure of 6, the intra-chain pi***pi interactions (d=3.711 A) are insignificant and the chain polymers are associated through weak, non-covalent C-H...O hydrogen-bonding interactions (d=2.586 A). Samples of 1-7 in their polycrystalline forms proved to be thermally stable at 200-300 degrees C; their respective decomposition temperatures are around 100 degrees C higher than that of the aliphatic analogue [Cu(SCH(3))](infinity). Data from in situ variable-temperature X-ray diffractometry measurements indicated that the structures of both 1 and 7 are thermally more robust than that of [Cu(SCH(3))](infinity). TEM analysis revealed that the solid samples of 1-5 and [Cu(SCH(3))](infinity) contained homogeneously dispersed crystalline nanorods with widths of 20-250 nm, whereas smaller plate-like nanocrystals were found for 6 and 7. SAED data showed that the chain polymers of 1-3 and [Cu(SCH(3))](infinity) similarly extend along the long axes of their nanorods. The nanorods of 1-5 and [Cu(SCH(3))](infinity) have been found to exhibit p-type field-effect transistor behavior, with charge mobility (micro) values of 10(-2)-10(-5) cm(2) V(-1) s(-1). Polycrystalline solid samples of 6 and 7 each showed a low charge mobility (<10(-6) cm(2) V(-1) s(-1)). The charge mobility values of field-effect transistors made from crystalline nanorods of 1-3 and [Cu(SCH(3))](infinity) could be correlated with their unique chain-like copper-sulfur networks, with the para-substituent of the arylthiolate ligand influencing the charge-transport properties.     

烷基胺为媒介的铜纳米棒的合成及其生长机制研究

以氯化铜为前躯体,葡糖糖为还原剂,烷基胺(十六胺和十八胺的混合物)为络合剂和表面包覆剂,经过络合反应和溶剂热两步反应首先得到形貌均一、直径约为100 nm的铜纳米颗粒, 随后自发生长为五重孪晶铜纳米棒(仍含有部分颗粒)。实验过程中分别对溶剂热反应1 h、3 h和5 h后的还原产物的形貌特征加以表征,可以推断被还原的铜原子首先均匀成核形成初级铜纳米颗粒,经过奥斯特瓦尔德老化过程生长为五重孪晶的次级铜纳米颗粒,由于孪晶结构具有很高的生长活性,在烷基胺的表面包覆作用下生长为各项异性的铜纳米棒。该方法提供了一种有效的铜纳米棒的制备方法并且降低了一维铜纳米材料的合成成本。     

Lithography inside Cu(OH)2 nanorods: a general route to controllable synthesis of the arrays of copper chalcogenide nanotubes with double walls

A series of well-aligned arrays of copper chalcogenide nanostructures, including Cu(7)S(4) and Cu(2-x)Se nanotubes with double walls have been successfully prepared by using Cu(OH)(2) nanorods as sacrificial templates. This new method is based on layer-by-layer chemical conversion and inward etching of the sacrificial templates, which is essentially a kind of lithography inside the Cu(OH)(2) nanorods. The key step of the process involves repeated formation of the copper chalcogenide wall and the dissolution of the Cu(OH)(2) core for two consecutive cycles. A large difference of the solubility product (Ksp) between the copper chalcogenide wall and the Cu(OH)(2) core materials is crucial for the direct replacement of one type of anions by the other. Our work provides a novel and general approach to the controllable synthesis of the arrays of copper chalcogenide nanotubes with double walls and complex hierarchies.     

One-pot hydrothermal synthesis of heterostructured ZnO/ZnS nanorod arrays with high ethanol-sensing properties

ZnO/ZnS heterostructured nanorod arrays with uniform diameter and length were synthesized from zinc substrates in a one-pot procedure by using a simple hydrothermal method. Structural characterization by HRTEM indicated that the heterostructured nanorods were composed of parallel segments of wurtzite-type ZnO and zinc-blende ZnS, with a distinct interface along the axial direction, which revealed the epitaxial relationship, ZnO (1010) and ZnS (111). The as-prepared ZnO/ZnS nanorods showed only two green emissions at around 523?nm and 576?nm. We also found that the nanorods exhibited high sensitivity to ethanol at relatively low temperatures, owing to their smaller size and structure.     

Delamination of surfactant-intercalated brucite-like hydroxy salts of cobalt and copper and solvothermal decomposition of the resultant colloidal dispersions

Surfactant anion intercalated hydroxy salts of copper and cobalt of the formula M(OH)2- x (surf)x.mH2O [M = Cu, Co; surf = dodecyl sulfate, dodecyl benzene sulfonate, and x = 0.5 for Cu and 0.67 for Co] delaminate readily in 1-butanol to give translucent colloidal dispersions that are stable for months. The extent of delamination and the colloidal dispersion observed in these solids is higher than what had been observed for layered double hydroxides. The dispersions yield the corresponding nanoparticulate oxides on solvothermal decomposition. While the copper hydroxy salt forms approximately 300 nm dendrimer-like CuO nanostructures comprising nanorods of approximately 10 nm diameter, the cobalt analogue forms approximately 20 nm superparamagnetic particles of Co3O4.     

利用牛血清蛋白合成CdS纳米棒和网状纳米线

采用简单易控、对环境友好的矿化方法, 利用牛血清蛋白(BSA)做模板, 通过Cd2+与硫代乙酰胺(TAA)反应制备了形貌均一的CdS纳米棒和网状纳米线. 分别采用透射电子显微镜(TEM)、X射线能谱(EDS)、X射线衍射(XRD)、荧光(PL)发射谱和导电原子力显微镜(C-AFM)等方法对不同实验温度下制备的CdS样品的结构形貌、成分组成和光学性质及微区电子传输行为进行了表征. 结果表明: 在实验反应温度为20 ℃时, 得到的产物为单分散性好的CdS 纳米棒, 长度为250 nm, 直径为30 nm; 在50 ℃时, 得到网状CdS纳米线, 其长度为2-3 μm; CdS纳米棒和网状纳米线均为立方相闪锌矿结构. 荧光性质的测试表明, CdS纳米棒和网状纳米线具有优良的荧光性能, 电流-电压(I-V)特性的表征表明CdS纳米线具有很好的电导特性.     

Simultaneous phase- and size-controlled synthesis of TiO(2) nanorods via non-hydrolytic sol-gel reaction of syringe pump delivered precursors

The simultaneous phase- and size-controlled synthesis of TiO(2) nanorods was achieved via the non-hydrolytic sol-gel reaction of continuously delivered two titanium precursors using two separate syringe pumps. As the injection rate was decreased, the length of the TiO(2) nanorods was increased and their crystalline phase was simultaneously transformed from anatase to rutile. When the reaction was performed by injecting titanium precursors contained in two separate syringes into a hot oleylamine surfactant solution with an injection rate of 30 mL/h, anatase TiO(2) nanorods with dimensions of 6 nm (thickness) x 50 nm (length) were produced. When the injection rate was decreased to 2.5 mL/h, star-shaped rutile TiO(2) nanorods with dimensions of 25 nm x 200 nm and a small fraction of rod-shaped anatase TiO(2) nanorods with dimensions of 9 nm x 100 nm were synthesized. Pure star-shaped rutile TiO(2) nanorods with dimensions of 25 nm x 450 nm were synthesized when the injection rate was further decreased to 1.25 mL/h. The simultaneous phase transformation and length elongation of the TiO(2) nanorods were achieved. Under optimized reaction conditions, as much as 3.5 g of TiO(2) nanorods were produced. The TiO(2) nanorods were used to produce dye-sensitized solar cells, and the photoconversion efficiency of the mixture composed of star-shaped rutile TiO(2) nanorods and a small fraction of anatase nanorods were comparable to that of Degussa P-25.     

Selective photo-deposition of Cu onto the surface of monodisperse oleic acid capped TiO2 nanorods probed by FT-IR CO-adsorption studies

A novel, non-aqueous, organometallic route to nanocomposite Cu@TiO2 materials is presented. TiO2 nanorods stabilized with oleic acid (OLA) were used as support for the photo-assisted deposition of Cu using the organometallic Cu(II) precursor [Cu(OCH(CH3)CH2N(CH3)2)2] (1). The copper precursor penetrates through the shell of OLA and is photo reduced to deposit Cu0 directly at the surface of the TiO2 rods. The obtained Cu decorated nanorods were still soluble in nonpolar organic solvents without change of the morphology of nanorods. The Cu@TiO2 colloid was characterized by means of UV-VIS, XRD, AAS, and HRTEM. FTIR CO adsorption studies provide evidence for Cu0 anchored at the titania surface by a characteristic absorption at 2084 cm-1. Comparative studies of Cu-deposition were performed using CuCl2 as simple Cu source which proved that the concept of organometallic disguise of the metal centre results in a higher reaction rate and the circumvention of non-selective reduction, parasitic side reactions and undesired agglomeration of the OLA stabilized titania nanorods.     

低温一步液相法合成ZnO纳米棒

近年来．一维纳米结构如纳米线、纳米棒、纳米带等．由于其新颖的物理化学性质及其在光学或电学器件上的广泛应用前景．已成为研究开发的热点。特别是氧化锌（ZnO）这种宽禁带（3．37eV）、高激子束缚能（60meV）的功能性半导体材料。基于它在光电子器件、太阳能电池、传感器、二极管、场发射显示器等领域潜在的重要应用价值，各国科学工作者都给予极大的研究热情．开发出了许多合成方案制备一维纳米ZnO结构，如水热法，模板法同，微乳液法阐，CVD法，热蒸发法，MOVPE法，电化学沉积法等。     

生物分子辅助溶剂热合成硫化锑纳米棒

以SbCl3和L-胱氨酸为反应原料,采用溶剂热法在170℃反应12h,制得硫化锑(Sb2S3)纳米棒.X射线衍射(XRD)、能量分散光谱(EDS)和X射线光电子能谱(XPS)研究表明所得产物为典型的Sb2S3正交结构.场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)研究显示,Sb2S3纳米棒长为3～6μm,平均直径约为150nm.讨论了不同反应时间对Sb2S3的形成及其形貌的影响,并根据实验结果对所合成的一维纳米棒可能的形成机理进行了简单的探讨.     

Nanorods of transition metal oxalates: A versatile route to the oxide nanoparticles

A versatile route has been explored for the synthesis of nanorods of transition metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates using reverse micelles. Transmission electron microscopy shows that the as-prepared nanorods of nickel and copper oxalates have diameter of 250 nm and 130 nm while the length is of the order of 2.5 μm and 480 nm, respectively. The aspect ratio of the nanorods of copper oxalate could be modified by changing the solvent. The average dimensions of manganese, zinc and cobalt oxalate nanorods were 100 μm, 120 μm and 300 nm, respectively, in diameter and 2.5 μm, 600 nm and 6.5 μm, respectively, in length. The aspect ratio of the cobalt oxalate nanorods could be modified by controlling the temperature.The nanorods of metal (Cu, Ni, Mn, Zn, Co and Fe) oxalates were found to be suitable precursors to obtain a variety of transition metal oxide nanoparticles. Our studies show that the grain size of CuO nanoparticles is highly dependent on the nature of non-polar solvent used to initially synthesize the oxalate rods. All the commonly known manganese oxides could be obtained as pure phases from the single manganese oxalate precursor by decomposing in different atmospheres (air, vacuum or nitrogen). The ZnO nanoparticles obtained from zinc oxalate rods are ～55 nm in diameter. Oxides with different morphology, Fe₃O₄ nanoparticles faceted (cuboidal) and Fe₂O₃ nanoparticles (spherical) could be obtained.     

Large-scale synthesis of TiO2 nanorods via nonhydrolytic sol-gel ester elimination reaction and their application to photocatalytic inactivation of E. coli

A simple method of synthesizing a large quantity of TiO(2) nanorods was developed. A nonhydrolytic sol-gel reaction between titanium(IV) isopropoxide and oleic acid at 270 degrees C generated 3.4 nm (diameter) x 38 nm (length) sized TiO(2) nanocrystals. The transmission electron microscopic image showed that the particles have a uniform diameter distribution. X-ray diffraction and selected-area electron diffraction patterns combined with high-resolution transmission electron microscopic image showed that the TiO(2) nanorods are highly crystalline anatase crystal structure grown along the [001] direction. The diameters of the TiO(2) nanorods were controlled by adding 1-hexadecylamine to the reaction mixture as a cosurfactant. TiO(2) nanorods with average sizes of 2.7 nm x 28 nm, 2.2 nm x 32 nm, and 2.0 nm x 39 nm were obtained using 1, 5, and 10 mmol of 1-hexadecylamine, respectively. The optical absorption spectrum of the TiO(2) nanorods exhibited that the band gap of the nanorods was 3.33 eV at room temperature, which is 130 meV larger than that of bulk anatase (3.2 eV), demonstrating the quantum confinement effect. Oleic acid coordinated on the nanorod surface was removed by the reduction of the carboxyl group of oleic acid, and the Brunauer-Emmett-Teller surface area of the resulting naked TiO(2) nanorods was 198 m(2)/g. The naked TiO(2) nanorods exhibited higher photocatalytic activity than the P-25 photocatalyst for the photocatalytic inactivation of E. coli.