新型磁性亲和吸附剂的制备及其在尿激酶纯化中的应用研究

合成了磁性聚乙烯醇和磁性聚甲基丙烯酸甲酯微球,并以它们为基质,用环氧氯丙烷、羰基二咪唑或溴化氰活化后,分别键合氨基乙酸、6-氨基己酸、乙二胺或己二胺为间隔臂,用1-乙基-3-(3-二甲基氨丙基)碳二亚胺盐酸盐或羰基二咪唑为偶联试剂,分别偶联对氨基苯甲脒、L-精氨酸甲酯、胍基乙酸或胍基己酸配体,合成了17种磁性亲和吸附剂,并用于尿激酶粗品的纯化.与前文制备的8种磁性亲和吸附剂作对照,研究了基质、活化试剂、间隔臂分子、偶联试剂及配体等因素对尿激酶纯化效果的影响.这些磁性亲和吸附剂在尿激酶的纯化中取得了较好的效果,大多数磁性亲和吸附剂的活性回收率在40%～70%之间,纯化倍数为15～40,吸附容量为0.08～0.2mg/mL.     

亲和层析固定相的制备及应用研究

以壳聚糖为载体,戊二醛为交联剂,氨基三乙酸(NTA)为配基,制备固载金属离子的亲和吸附剂,试验了交联剂浓度、配基浓度、偶联温度及时间对配体固载量的影响,最佳条件为戊二醛浓度0.55%、NTA浓度0.4mol·L-1、偶联温度65℃、偶联时间10h。层析分离纯化豆类脲酶,锌柱和镍柱的酶回收率分别为88.5%和80.4%,纯化倍数分别为3.7和6.1,实验结果表明镍柱对脲酶有较高的分离纯化选择性。     

染料壳聚糖微球的制备及其对牛血清白蛋白(BSA)吸附性能的研究

采用反相悬浮交联法制备壳聚糖微球,对微球进行羟丙基氯化及氨基化,并偶联色素配体Cibacron Blue F3GA,得到一种新型染料亲和吸附剂.以牛血清白蛋白(BSA)为目标蛋白,考察了该染料亲和吸附剂的吸附性能,发现其对BSA有较高的吸附量(95.2mg/g),吸附行为满足Langmuir吸附等温式.负载牛血清白蛋白的微球容易洗脱,洗脱率高达99％.     

基于磁性微球的固定化金属亲和载体及其在蛋白质/多肽纯化中的应用

采用模板法制备的单分散磁性硅胶微球,经过表面修饰偶联上亚氨基二乙酸(IDA),与过渡金属离子Cu2 螯合,制成一种新型的磁性固定化金属亲和纯化载体。用牛血清白蛋白(BSA)作为模型进行磁性固定化金属亲和吸附蛋白的研究,结果表明,BSA在磁性亲和载体上的吸附可用Langmuir吸附方程描述,对BSA的饱和吸附量为90mg/g。将磁性亲和载体用于带有组氨酸标签的镇痛抗肿瘤多肽(analgesic-antitumorpeptide,AGAP)纯化,在未经过滤的细胞裂解液中可以将AGAP一步纯化,非特异性吸附低,操作简便,完全适用于含有组氨酸标记的重组多肽或蛋白的分离纯化。     

壳聚糖亲和磁性毫微粒的制备及其对蛋白质的吸附性能研究

以壳聚糖为包裹材料包埋自制的磁流体 ,制备了具有核 壳结构的磁性毫微粒 ,并偶联色素配基CibacronBlue 3GA(偶联量 1 4 .5μmol/mL)得到了一种新型亲和磁性毫微粒 .结果表明 ,所得亲和磁性微球具有较窄的粒径分布、形状规整 .以牛血清白蛋白 (BSA)和溶菌酶 (Lys)为目标蛋白 ,考察了该亲和磁性毫微粒的吸附性能 ,发现其对BSA和Lys的吸附量分别为 4和 2 8mg/g,吸附行为满足Langmuir吸附等温式 ,且对时间依赖性小而对溶液离子强度敏感 .     

分离尿激酶的胍基型亲和色谱填料研究

尿激酶的精制一般使用亲和色谱法［’－‘ｊ．目前实际使用和文献报道最多的填料是在 ＳｅＰｈａｒｏｓｅ上键合对氨基苯眯（ｐ－ＡＢＺ）制得的［‘ｊ．这种填料分高效果较好,但机械强度不高,只能用于常压色谱,而且寿命较短．前文［‘１报道了用 ＳｅＰｈａｒｏｓｅ和聚甲基丙烯酸环氧丙酯微球为基质, Ｐ－ＡＢＺ为配基分离尿激酶的亲和色谱填料的对照研究．本文报道以含肥基的有机小分子为配基,ＳｅＰｈａｒｏｓｅ及两种聚甲基丙烯酸环氧丙酯微球为基质的分离尿激酶色谱填料的合成和性能试验．发现肥基己酸和精氨酸为配基的亲和色谱…     

超大孔聚合物亲和色谱层析介质的制备及评价

探索了用席夫碱法在超大孔聚合物微球表面偶联Protein A配基制备亲和层析介质的方法,以亲水化后的聚丙烯酸酯类超大孔微球为基质,考察了氧化剂浓度(H5IO6)对配基偶联量的影响,以扫描电子显微镜表征微球表面形貌,结果发现其偶联Protein A后微球仍能够保持其大孔结构。考察了该类亲和介质在不同操作流速(361~3 600 cm/h)下的动态载量,在3 600 cm/h操作流速下,人抗体载量与361 cm/h相比仅下降10%左右,表明该类介质适合抗体大分子的快速传质,能够满足快速、高效、高通量分离纯化的需求。     

磁性壳聚糖微球的制备及对Cr(Ⅵ)的吸附性能研究

用壳聚糖包埋磁流体,用戊二醛交联制成磁性壳聚糖微球,并用红外光谱表征其结构。用制备的磁性壳聚糖微球吸附Cr(Ⅵ)离子,考察了其对Cr(Ⅵ)离子的吸附性能;探讨了吸附时间、溶液pH值、吸附剂用量、温度、Cr(Ⅵ)起始浓度以及其他离子存在对Cr(Ⅵ)离子去除率的影响。实验结果表明,磁性壳聚糖微球吸附Cr(Ⅵ)离子的最佳条件为:吸附平衡时间40 min,最佳吸附pH值6左右,磁性壳聚糖微球用量10 mg,温度升高有利于提高磁性壳聚糖微球的吸附效率,Cr(Ⅵ)离子起始质量浓度为12μg/mL,无机盐的存在引起磁性壳聚糖微球的吸附性能降低。并且考察了吸附剂的再生性能,实验结果表明磁性壳聚糖微球具有良好的重复使用性。     

高分子微球偶联固定培美曲塞二钠

在无皂乳液聚合制备表面带环氧基的聚(苯乙烯-甲基丙烯酸环氧丙酯)(PSG)乳液微球的基础上,采用1,6-己二胺对PSG微球进行表面修饰,获得了氨基封端、表面清洁的PSG-1,6-己二胺(PSGN)微球。通过PSGN微球表面的端氨基反应性偶联固定培美曲塞二钠药物分子,考察了药物分子偶联固定反应的影响因素。结果表明:培美曲塞二钠药物在PSGN微球表面的固定接枝量主要取决于PSGN微球的粒径大小和表面活泼端氨基的质量浓度及分布。     

分离尿激酶的亲和色谱填料的制备

 合成了分别以 Sepharose和聚甲基丙烯酸环氧丙酯为基质、对氨基苯甲脒为配基的分离尿激酶的两种亲和色谱填料 ,并用于尿激酶粗品的直接纯化 ,活性回收率分别为 1 0 8.3 %和 43 .4% ,比活提高倍数分别为 9.0 6倍和 3 6.9倍。     

Antiseptic Nanocapsule Formation via Controlling Polymer Deposition onto Water-in-Oil Miniemulsion Droplets

The stable nanodroplet was prepared by inverse miniemulsion with an aqueous antiseptic solution dispersed in an organic medium of solvent/nonsolvent mixture containing an oil-soluble surfactant and the polymer for shell formation. The change in gradient of the solvent/nonsolvent mixture, obtained by heating at 50 °C, led to the precipitation of the polymer in the organic phase and deposition onto the large interphase of the aqueous miniemulsion droplets. The monodisperse polymer nanocapsule, with the size range of 80–240 nm, dispersed in cyclohexane phase was achieved as a function of surfactant concentration. By variation of polymer content, molecular weight and type, an encapsulation efficiency of 20–100% was obtained as detected by proton-nuclear magnetic resonance spectroscopy measurement. The nanocapsule could be easily transferred into water as continuous phase resulting in aqueous dispersion with nanocapsule containing the antiseptic agent as an aqueous core. The encapsulated amount of the antiseptic agent was evaluated to indicate the durability of the nanocapsule's wall. Additionally, the different types of polymer having glass transition temperature ranging from −60 to 100°C have been successfully used. Currently, the research work on the incorporation of nanocapsules onto natural rubber (NR) latex in order to prepare NR latex glove containing the antiseptic agent nanocapsules is carried out. By using the simple and versatile layer-by-layer (LbL) technique based mainly on an electrostatic interaction between oppositely charged species, the deposition of nanocapsules onto NR latex film has successfully been fulfilled.     

Affinity partitioning of enzymes using dextran-bound procion yellow HE-3G. Influence of dye-ligand density

The dye Procion Yellow HE-3G was bound to dextran of molecular weight 70,000 and the partitioning of this dye-polymer within an aqueous two-phase system containing dextran and poly(ethylene glycol) was studied as function of ligand density, polymer concentration, type of salt, concentration of salt and concentration of dye-dextran. Even moderate dye:dextran molar ratios (5-8) make the partitioning strongly salt-dependent. The dye-dextran can be directed to either the upper or the lower phase with partition coefficients from 0.02 to 28 by using salts. The dye-dextran in the two-phase system affects the partitioning of dye-binding enzymes (lactate dehydrogenase, glucose-6-phosphate dehydrogenase, 3-phosphoglycerate kinase) towards the dye-containing phase. Measurements of competition with nucleotide binding show an increased affinity of the dye for the enzyme with increasing ligand:dextran ratio. Theoretical considerations indicate that 1-2 dextran molecules are attached per enzyme molecule when affinity partitioning is fully developed.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

In this article,a spherical chitosan gel crosslinked by epichlorohydrin was prepared.It was then loaded with copper ions to produce a metal chelate affinity adsorbent for protein.The uptake of bovine serum albumin(BSA)by the affinity adsorbent was investigated.and the adsorption capacity for BSA as high as 40mg/g-wet beads was observed.The adsorption equilibrium data was well correlated by the Langmuir equation.The adsorption was considerably affected by pH.In additio.The amount of BSA adsorbed onto the beads decreased with the increasing of aqueous phase ionic strength,so adsorbed BAS can be desorbed by adjusting pH orionic strength of the solution.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

1. INTRODUCTION Chitosan is a hydrolyzed derivative of chitin and belongs to a family of linear unbranched polysaccharides which contain large amounts of 1,4-linked-2-amino-2-deoxy-β-D-glucan residues. The presence of free amine groups in chitosan enhances the solubility and reactivity of this polymer. Interest in modifying chitosan by using glutaraldehyde has recently increased. The derivatized polymers have been employed for many applications [1~2], including protein immobilization…     

Concanavalin a immobilized affinity adsorbents for reversible use in yeast invertase adsorption

Concanavalin A (Con A) immobilized poly(2-hydroxyethyl methacrylate) (PHEMA) beads were investigated for specific adsorption of yeast invertase from aqueous solutions. PHEMA beads were prepared by a suspension polymerization technique with an average size of 150-200 microm, and activated by epichlorohydrin. Con A was then immobilized by covalent binding onto these beads. The maximum Con A immobilization was found to be 10 mg/g. The invertase-loading capability of the PHEMA/Con A beads was 107 mg/g. The maximum invertase adsorption capacity on the PHEMA/Con A adsorbents was observed at pH 5.0. The values of the Michaelis constant K(m) of invertase were significantly larger upon adsorption, indicating decreased affinity by the enzyme for its substrate, whereas V(max) was smaller for the adsorbed invertase. Adsorption improved the pH stability of the enzyme as well as its temperature stability. Thermal stability was found to increase with adsorption. The adsorbed enzyme activity was found to be quite stable in repeated experiments. Storage stability of adsorbed invertase.     

Conversion of the surface property of oleic acid stabilized silver nanoparticles from hydrophobic to hydrophilic based on host-guest binding interaction

This paper describes a general method to change the surface property of the oleic acid stabilized silver nanoparticles and successful tranferring of the silver nanoparticles from the organic phase into the aqueous phase. By vigorous shaking of a biphasic mixture of the silver organosol protected with oleic acid and p-sulfonated calix[4]arene (pSC4) aqueous solution, it is believed that an inclusion complex is formed between oleic acid molecules and pSC4, and the protective layer of the silver nanoparticles shifts from hydrophobic to hydrophilic in nature, which drives the transfer of silver nanoparticles from the organic phase into the aqueous phase. The efficiency of the phase transfer to the aqueous solution depends on the initial pSC4 concentration. The pSC4-oleic acid inclusion complex stabilized nanoparticles can be stable for long periods of time in aqueous phase under ambient atmospheric conditions. The procedure of phase transfer has been independently verified by UV-vis, transmission electron microscopy, Fourier transform infrared, and 1H nuclear magnetic resonance techniques.     

Polyvalent metal cation modified dextran hydrogels: non-size exclusion applications

Dextran gels crosslinked covalently with epichlorohydrin and by coordinate bonding with polyvalent metal cations were prepared and characterized. Concentrations of the metal cations: 0.2 mmol/g of dextran almost always in the form of sulfate (Mg(II), Cu(II), Zn(II), Ni(II), Co(II), Mn(II), Al(III), Fe(III) and Ti(IV)) as well as of epichlorohydrin: 1.5 mol/mol of dextran were kept at a constant level. The contents of the modifying cations and some physicochemical properties of spherical gel particles were investigated by atom absorption spectrometry, scanning electron microscopy, infrared spectrometry (IR) and derivatography. Characteristic shifts, in comparison with the linear dextran and epichlorohydrin crosslinked dextran gel of band wavelengths and of temperatures were revealed by IR and derivatography. These observations are connected with differences in the complexation strengths of polyvalent metal cations with hydroxyl groups of epichlorohydrin crosslinked dextran matrix. Some nonexclusion directions of application covering catalytic activity in dry as well as swollen aqueous gel states were tested. © 1998 John Wiley & Sons, Ltd.     

Phase transfer of silver nanoparticles from aqueous to organic solutions using fatty amine molecules

We demonstrate the phase transfer of silver nanoparticles synthesized in an aqueous medium into hexane containing the cationic surfactant octadecylamine (ODA). During vigorous shaking of the biphasic mixture, rapid phase transfer of the silver nanoparticles into the organic phase was observed. The phase transfer of the silver nanoparticles arises due to coupling of the silver nanoparticles with the ODA molecules present in organic phase via either coordination bond formation or weak covalent interaction. This process renders the nanoparticles sufficiently hydrophobic and dispersible in the organic phase. The ODA-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder and are readily redispersible in different organic solvents. The nature of binding of the ODA molecules to the silver nanoparticle surface was characterized using UV-vis spectroscopy, thermogravimetry, transmission electron microscopy, nuclear magnetic resonance spectroscopy, X-ray photoemission spectroscopy, and Fourier transform infrared spectroscopy.     

Affinity partitioning of human antibodies in aqueous two-phase systems

The partitioning of human immunoglobulin (IgG) in a polymer-polymer and polymer-salt aqueous two-phase system (ATPS) in the presence of several functionalised polyethylene glycols (PEGs) was studied. As a first approach, the partition studies were performed with pure IgG using systems in which the target protein remained in the bottom phase when the non-functionalised systems were tested. The effect of increasing functionalised PEG concentration and the type of ligand were studied. Afterwards, selectivity studies were performed with the most successful ligands first by using systems containing pure proteins and an artificial mixture of proteins and, subsequently, with systems containing a Chinese hamster ovary (CHO) cells supernatant. The PEG/phosphate ATPS was not suitable for the affinity partitioning of IgG. In the PEG/dextran ATPS, the diglutaric acid functionalised PEGs (PEG-COOH) displayed great affinity to IgG, and all IgG could be recovered in the top phase when 20% (w/w) of PEG 150-COOH and 40% (w/w) PEG 3350-COOH were used. The selectivity of these functionalised PEGs was evaluated using an artificial mixture of proteins, and PEG 3350-COOH did not show affinity to IgG in the presence of typical serum proteins such as human serum albumin and myoglobin, while in systems with PEG 150-COOH, IgG could be recovered with a yield of 91%. The best purification of IgG from the CHO cells supernatant was then achieved in a PEG/dextran ATPS in the presence of PEG 150-COOH with a recovery yield of 93%, a purification factor of 1.9 and a selectivity to IgG of 11. When this functionalised PEG was added to the ATPS, a 60-fold increase in selectivity was observed when compared to the non-functionalised systems.