Second-harmonic spectroscopy of Ge/Si(001) and Si1-xGex(001)/Si(001)

0.9 Ge_0.1(001)/Si(001) films with SH photon energies 3.1<2hν<3.5 eV near the bulk E₁ critical point of Si(001) or Si_0.9Ge_0.1(001). Ge was deposited on Si(001) by using atomic layer epitaxy cycles with GeH₄ or Ge₂H₆ deposition at 410 K followed by hydrogen desorption. As Ge coverage increased from 0 to 2 monolayers the SH signal increased uniformly by a factor of seven with no detectable shift in the silicon E₁ resonant peak position. SH signals from Si_0.9Ge_0.1(001)/Si(001) were also stronger than those from intrinsic Si(001). Hydrogen termination of the Si_0.9Ge_0.1(001) and Ge/Si(001) surfaces strongly quenched the SH signals, which is similar to the reported trend on H/Si(001). We attribute the stronger signals from Ge-containingsurfaces to the stronger SH polarizability of asymmetric Ge-Si and Ge-Ge dimers compared to Si-Si dimers. Hydrogen termination symmetrizes all dimers, thus quenching the SH polarizability of all of the surfaces investigated. Received: 13 October 1998 / Revised version: 18 January 1999     

Surface vibrations of Na(001) and K(001) surfaces

We present the results of a theoretical study of the dynamics of the atom motion of Na(001) and K(001) surfaces. The total electronic energy is calculated using a pseudopotential approach with a confined electron gas as unperturbed system. With this theory the dynamical matrix can he derived without resorting to empirical parametrizations. Surface phonon dispersion curves are reported for the high symmetry directions of the two-dimensional Brillouin zone for ideal and relaxed configurations. The calculated spectra are compared with the results of semi-empirical force constant calculations. The effects of single and multilayer relaxations on the location and the nature of the main surface bands are examined.     

Structural phase transition on Si(001) and Ge(001) surfaces

Among a variety of solid surfaces, Si(001) and Ge(001) have been most extensively studied. Although they seem to be rather simple systems, there have been many conflicting arguments about the atomic structure on these surfaces. We first present experimental evidence indicating that the buckled dimer is the basic building block and that the structural phase transition between the low-temperature c(4x2) structure and the high-temperature (2x1) structure is of the order-disorder type. We then review recent theoretical work on this phase transition. The real system is mapped onto a model Ising-spin system and the interaction parameters are derived from total-energy calculations for different arrangements of buckled dimers. The calculated critical temperature agrees reasonably well with the experimental one. It is pointed out that the nature of the phase transition is crucially affected by a small amount of defects on the real surfaces.     

Surface charge-density wave phase transitions on Mo(001) and W(001)

The recently reported phase transitions of Mo(001) and W(001) are discussed in terms of surface charge-density waves. Band structure, surface lattice distortion and possible accompanying surface antiferromagnetism are considered. The expected two-dimensional critical behaviour is also investigated.     

Roles of BiOCl(001) in face-to-faced BiOI(010)/BiOCl(001) heterojunction

In order to have an insight into the internal electric field (IEF) of BiOCl(001), we design a novel wide-spectrum responsive BiOI(010)/BiOCl(001) heterojunction composite by a facile method. The system could shield the photocatalysis of BiOCl(001) under visible light due to its large E_g (3.41 eV), thus specifying role of the BiOCl(001) in BiOI(010)/BiOCl(001). The XRD and TEM results show that the composites exhibit a coexistence of both tetragonal BiOI(010) and BiOCl(001) phases. The as-prepared BiOI(010)/BiOCl(001) samples exhibit higher BET surface area than those of BiOI(010) and BiOCl(001). The UV, visible, and simulated sunlight photocatalytic activities of composites for methyl orange (MO) were greatly enhanced compared to either pure BiOI(010) or BiOCl(001). Especially, under the visible light, an enhancement of photocatalytic activity (MO, acid fuchsin) was found for BiOI(010)/BiOCl(001), suggesting an IEF of BiOCl(001) plays a key role on the photo-generated carrier separation of BiOI(010). Specifying the IEF role of BiOCl(001) in BiOI(010)/BiOCl(001) is expected to inspire the further exploration, developing efficient photocatalysts with potential applications.     

Intervalley electron scattering by phonons in (AlAs)1(GaAs)3(001) superlattices

Intervalley electron scattering by phonons in (AlAs)₁(GaAs)₃(001) superlattices is studied using the pseudopotential method and a phenomenological model of the bonding forces. The deformation potentials between the conduction band extrema of the superlattice involving short-and long-wavelength phonons are calculated. It is shown that the mixing of states from the zinc-blende L valleys plays a greater role in intervalley scattering in a superlattice than the Γ-X mixing. In particular, due to L-L mixing, the Γ-X ₃ transitions, analogous to Γ-L transitions in zinc blende, have higher intensities than the analogues of Γ-X transitions (Γ₁-M ₅ and (Γ₁-Γ₃ transitions). The deformation potentials averaged over the scattering channels in the superlattice agree with the corresponding potentials in a solid solution, but all transitions in the superlattice have higher intensities for the lower states.     

Surface electromigration of metals on Si(001): In/Si(001)

The possibility of surface electromigration (SE) of metals of In, Ga, Sb and Ag on a very flat Si(001)2×1 substrate (single domain 2×1) was examined by SEM, μ-RHEED and μ-AES under UHV conditions. It was found that Ga, Sb and Ag show no SE on Si(001) surface even at DC annealing temperatures for the desorption of these metals. For In on Si(001), a very fast SE (8000 μm/min) towards the cathode side was found that suddenly sets in at 450°C DC annealing, which was related to a surface phase transition. μ-RHEED and μ-AES observation showed that the SE is related to an ordered 4×3-In phase together with two-dimensional In gas phase over the 4×3-In phase and an In-disordered phase at the front end of SE. Single domain 4×3-In phases were found to occur under sequences of In deposition and DC annealing which involve the In SE on Si(001).     

Investigation of GeS (001)

Various possibilities of the preparation of the clean GeS surface were studied. The LEED pattern of the (001) face of the GeS cleaved in situ exhibits clear ordinary reflections. The dimensions of the surface unit mesh agree well to within experimental error (6%) with the corresponding dimensions of the bulk unit cell.The author wishes to thank Dr M.imeková for performing scanning electron microscopy pictures and Dr K.Jurek CSc. for EDAX measurements. Special thanks go to Dr M.Závtová who called my attention to this interesting material.     

InP(001)-(2 x 1) surface: a hydrogen stabilized structure

The InP(001)(2 x 1) surface has been reported to consist of a semiconducting monolayer of buckled phosphorus dimers. This apparent violation of the electron counting principle was explained by effects of strong electron correlation. Combining first-principles calculations with reflectance anisotropy spectroscopy and LEED experiments, we find that the (2 x 1) reconstruction is not at all a clean surface: it is induced by hydrogen adsorbed in an alternating sequence on the buckled P dimers. Thus, the microscopic structure of the InP growth plane relevant to standard gas phase epitaxy conditions is resolved and shown to obey the electron counting rule.