凝固-漂浮分散液液微萃取富集分光光度法测定水中亚硝酸根

研究了凝固-漂浮分散液液微萃取（SFO-DLLME）-分光光度法测定水样中痕量亚硝酸根的方法。以1-十二醇为萃取剂,乙醇为分散剂进行分散液液微萃取,离心后通过冷冻凝固操作使漂浮的萃取剂和水相分离。最佳实验条件下,方法的线性范围为2.0-280μg/L（r=0.999 9）,检出限为0.34μg/L。方法已成功应用于环境水样分析,相对标准偏差在2.4%-3.3%,加标回收率在98.2%-102.4%。     

分散液液微萃取-气相色谱法测定水样中甲拌磷农药

建立了基于分散液液微萃取(DLLME)的新型样品前处理方法,并采用气相色谱/氢火焰离子化检测器对水样中痕量的甲拌磷农药进行了测定。考察了影响分散液液微萃取的因素包括萃取溶剂、分散剂、样品体积、萃取温度和离心速度等。在最佳实验条件下,对甲拌磷的富集倍数达到300倍;检出限为0.001μL/L;方法的线性范围为0.01~10μL/L,R2为0.9986;相对标准偏差为6.65%;回收率为104%。将分散液液微萃取法与单滴液相微萃取和离子液体-液相微萃取方法进行了对比,结果表明,分散液液微萃取技术具有操作简单、快捷(前处理时间小于5 min)、富集效果好、回收率高等优点。同时预言,将离子液体与分散液液微萃取结合,将会产生更加满意的结果。     

离子液体-分散液液微萃取-比色法测定水样中痕量铁

建立了基于分散液液微萃取(DLLME)-数字成像比色(DIC)法测定水样中Fe的方法。在乙酸-乙酸钠缓冲溶液中,Fe(Ⅲ)被盐酸羟胺还原成Fe(Ⅱ)后与邻菲罗啉作用生成橙红色络合物。以离子液体[C6M IM][PF6]为萃取剂,乙腈为分散剂,采用涡旋辅助的分散液液微萃取方法对该络合物进行萃取和富集后,直接通过手机比色装置对Fe进行测定。优化了手机比色装置参数和分散液液微萃取的萃取剂种类及用量、分散剂种类及用量等条件。结果表明,在最佳条件下,方法的线性范围为24～200μg/L,相关系数(r~2)为0.9973,检出限为3μg/L,加标回收率为90.0%～108.0%,相对标准偏差(RSD)为0.8%～1.8%。该方法可用于测定环境水样中痕量Fe。     

超声辅助萃取-分散液液微萃取/气相色谱法测定环境水样中六氯苯、林丹及硫丹

建立了超声辅助萃取(UAE)-分散液液微萃取(DLLME)/气相色谱法测定环境水样中六氯苯、林丹和硫丹,并对影响萃取和富集效率的因素进行了优化。在最优条件下,六氯苯、林丹及α-硫丹的线性范围为1.0~1 000μg/L,检出限分别为0.47、0.39及0.63μg/L;β-硫丹线性范围为5.0~1 000μg/L,检出限为2.44μg/L;相对标准偏差(RSDs)为8.3%~11.7%(n=7)。用该方法对环境水样中的六氯苯、林丹及硫丹进行了分析,自来水、灌溉水、湖水样的平加标回收率分别为94.2%~100.4%、89.4%~99.4%和69.6%~96.3%。     

分散液液微萃取-高效液相色谱串联质谱法快速测定水迁移相中甲醛

建立了分散液液微萃取-高效液相色谱串联质谱法快速测定轻纺消费品水迁移相中痕量甲醛的分析方法。水迁移相甲醛首先与2,4-二硝基苯肼(2,4-DNPH)衍生化反应生成甲醛-2,4-二硝基苯腙,优化的反应时间为15 min,2,4-DNPH浓度为5 mmol/L,HCl浓度为50 mmol/L;在分散液液微萃取过程中,以500μL乙腈为分散剂、50μL四氯乙烯为萃取剂瞬间完成衍生物的萃取富集后,进行HPLC-ESI-MS/MS分析,分析时间为3.5 min。水相中甲醛的检测线性范围为0.001~1 mg/L,线性相关系数(R2)为0.9987,检出限为0.25μg/L。平均加标回收率范围在82.8%~113.5%,相对标准偏差范围在2.1%~9.2%,平均富集倍数为120。方法已经应用于轻纺消费品水迁移相中甲醛含量的测定。     

分散液液微萃取-气相色谱法测定地表水中三氯苯

采用分散液液微萃取–气相色谱法测定地表水中3种三氯苯同分异构体。实验考察了萃取剂及其用量、分散剂及其用量对萃取效率的影响。实验结果表明,三氯苯3种同分异构体在质量浓度2.00～64.0μg/L范围内线性良好,测定结果的相对标准偏差均小于4%(n=7),平均加标回收率为94.1%～103.9%。该方法操作简便、快捷,有机试剂用量少,样品富集倍数高。三氯苯3种同分异构体的检出限分别为0.03,0.04,0.03μg/L,测量精密度和准确度能满足分析测度要求,适用于地表水中痕量三氯苯的测定。     

化学计量学优化-分散液液微萃取-荧光分析法测定食品接触物中双酚A的迁移量

建立了分散液液微萃取-荧光分析法测定双酚A的方法,并对塑料水杯和塑料袋中双酚A的迁移量进行测定。经Plackett-Burman设计筛选影响因素后,利用中心复合表面设计确定了最佳萃取条件。利用全因子设计确定荧光测定条件为:0.2 mol/L HCl,4×10-4mol/Lβ-环糊精。在水、10%乙醇条件下,方法线性范围1～50μg/L(r=0.999),检出限为0.53μg/L;在3%乙酸条件下,线性范围为1～60μg/L(r=0.997),检出限为0.85μg/L。方法回收率为95.4%～111.2%,相对标准偏差(n=6)为13%～16%。所测样品在室温水中双酚A迁移量低于检出限,在沸水、3%乙酸及10%乙醇中均有不同程度迁移。     

分散液液微萃取-气相色谱法测定水样中甲基环硅氧烷

将分散液液微萃取与气相色谱法技术相结合,建立了测定水样中3种甲基环硅氧烷残留的方法.重点探讨了萃取剂的种类和用量、分散剂的种类和用量、萃取时间及盐浓度等对样品萃取效率的影响.结果表明在优化条件下,待测物在5～100μg/L范围内线性良好(r＞0.99),检出限在2～4μg/L之间,富集倍数可达165～170倍,相对标准...     

分散液液微萃取-气相色谱/质谱法测定水中多环芳烃

用分散液液微萃取-气相色谱/质谱法测定水样中的16种多环芳烃(PAHs)。通过实验确定最佳萃取条件为:20μL四氯化碳作萃取剂,1.0 mL乙腈作分散剂,超声萃取1 min。在优化条件下,多环芳烃的富集倍数达到216～511,方法在0.05～50μg/L范围内呈良好的线性关系,相关系数(R2)在0.9873～0.9983之间,检出限为0.0020～0.14μg/L。相对标准偏差(RSD)在3.82%～12.45%(n=6)之间。该方法成功用于实际水样中痕量多环芳烃的测定。     

分散液液微萃取-高效液相色谱法测定环境水样中2,4-二氯酚

建立了简便、快速、有效的分散液液微萃取-高效液相色谱法测定环境水样中2,4-二氯酚的分析方法。对萃取剂、分散剂的种类和体积、萃取时间、离心时间、盐浓度等影响萃取效率的因素进行了优化。方法的线性范围为1～500μg/L(r=0.9997),相对标准偏差(RSD)为3.8%(n=6),检出限为0.19μg/L。该法适用于环境水样中的痕量2,4-二氯酚的检测。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.