聚乙烯塑料包装材料中4种抗氧化剂向脂肪食品模拟物迁移的研究

本文基于超高效液相色谱建立了一种脂肪食品模拟物异辛烷中抗氧化剂叔丁基对羟基茴香醚(BHA)、2,6-二叔丁基对甲酚(BHT)、四[甲基-β-(3,5-二叔丁基-4-羟基苯基)丙酸酯]季戊四醇酯(Irganox1010)以及β-(4-羟基-3,5-二叔丁基苯基)丙酸正十八酯(Irganox1076)的提取检测方法,加标回收率在78.0%～108.7%之间,相对标准偏差(RSD)在4.0%～13.7%之间。研究了聚乙烯(PE)膜中抗氧化剂向异辛烷的迁移,讨论了温度及时间对迁移的影响,并根据迁移数据进行了初步的数学模型的建立,对实验值与数值模拟结果计算值作了对比分析。     

UPLC研究塑料食品包装材料中的抗氧化剂及其迁移

对塑料食品包装材料中的抗氧化剂叔丁基对羟基茴香醚(BHA)、2,6-二叔丁基对甲酚(BHT)、β-(4-羟基-3,5-二叔丁基苯基)丙酸正十八酯(Irganox1076)3种抗氧化剂进行了研究,建立了一种快速、高效的检测方法。方法包括:以甲醇为萃取溶剂,快速溶剂萃取(ASE)塑料食品包装中的抗氧化剂;以异辛烷为脂肪食品模拟物,对迁移进入异辛烷中的抗氧化剂进行旋转蒸发浓缩;使用超高效液相色谱(UPLC)进行检测。本方法有较好的相关线性(R20.99)、平均回收率(分别为75.8%~108.7%)、精密度(RSD分别为2.8%~12.7%)及低于欧盟法规规定的特定迁移限量(SML)的检出限。本方法用于市售食品的包装检测,各抗氧化剂在包装材料中被检测出,迁移量均低于特定迁移限量。     

反相高效液相色谱-荧光法同时测定食品中叔丁基对苯二酚和叔丁基羟基茴香醚的含量

1 引言 油溶性抗氧化剂叔丁基对苯二酚(tert-butyl hydroquinone,TBHQ)、叔丁基羟基茴香醚(butylated hydroxyanisole,BHA)和2,6-二叔丁基对甲酚(butylated hydroxytoluene,BHT)是目前最常用的化学合成抗氧化剂,能够有效阻止或延迟油脂氧化变质.     

我国引种的迷迭香抗氧化成份的分离和抗氧化性能研究

近几年来,对食品及医药中普遍使用的人工合成抗氧化剂2,6-二叔丁基对甲基苯酚(BHT),2-叔丁基对二酚(TBHQ)及2或3-叔丁基对甲氧基酚(BHA)的一系列研究表明,虽然抗氧化性能很好,但它们有较多的副作用, 既使是低活性取代酚在抗氧化过程中也伴随着副反应。这就限制了人工合成抗氧化剂的广泛使用,因此,寻找或合成无毒害抗氧化     

超高效液相色谱-质谱法测定油脂中的10种抗氧化剂

对油脂中的没食子酸丙酯(PG),没食子酸辛酯(OG)、2,4,5-三羟基苯丁酮(THBP)、叔丁基对苯二酚(TBHQ)、叔丁基对羟基茴香醚(BHA)、2,6-二叔丁基对甲酚(BHT)、没食子酸十二酯(DG)、正二氢愈创酸(NDGA)、2,6-二叔丁基-4-羟甲基苯酚(HMBP)和没食子酸异戊酯(IAG)10种抗氧化剂进行了超高效液相色谱-质谱法(UPLC/MS)测定的系统研究,建立了一种简单、快速、准确测定油脂中10种抗氧化剂的测定方法。对样品中提取溶剂和提取时间的选择以及相关线性、精密度、回收率作了考察和实验。结果表明,本方法能有效提取油脂样品中的这10种抗氧化剂,并对其进行UPLC/MS分离和测定。10种抗氧化剂的平均回收率为92.56%～102.5%(n=6),相对标准偏差为0.68%～5.12%(n=6),检出限为2～10μg/L。     

离子液体双水相萃取-高效液相色谱法测定香精香料中的抗氧化剂

建立了香精香料中没食子酸丙酯(PG)、特丁基对苯二酚(TBHQ)、叔丁基对羟基茴香醚(BHA)和2,6-二叔丁基对甲酚(BHT)四种抗氧化剂的高效液相色谱检测方法。香精香料样品经离子液体双水相前处理,用高效液相色谱-二极管阵列检测法(HPLC-DAD)测定。结果表明,在0.5～100μg/mL浓度范围内,四种抗氧化剂的色谱峰面积均与其浓度呈线性关系,相关系数r≥0.9990,检出限分别为3.0、7.1、5.1和9.7ng/mL,回收率为85%～97%,相对标准偏差为1.2%～6.7%。     

中空纤维膜液相微萃取技术／气相色谱-质谱法对食品中防腐剂与抗氧化剂的测定

将中空纤维膜液相微萃取技术与气相色谱-离子阱质谱联用,测定食品中的4种防腐剂(对羟基苯甲酸甲酯(MP)、对羟基苯甲酸乙酯(EP)、对羟基苯甲酸丙酯(PP)及对羟基苯甲酸丁酯(BP))和3种抗氧化剂(叔丁基-4-羟基苯甲醚(BHA)、叔丁基苯二酸(TBHQ)、2,6-二叔丁基对甲酚(BHT)).优化的萃取条件:以15%(质量分数)Na2SO4的盐溶液为稀释溶剂,5 μL甲苯为萃取溶剂,搅拌速率为1 200 r/min,萃取时间为15 min.该方法的线性范围为0.4 ～80 mg/kg,检出限为0.002 ～8.0 μg/kg,加标回收率为94% ～115%,相对标准偏差为4.38% ～9.34%.     

喷气燃料中抗氧剂2,6-二叔丁基对甲酚的高效液相分析

 采用高效液相法分析喷气燃料HDF 1中的抗氧化剂 2 ,6 二叔丁基对甲酚 (简称BHT)含量 ,研究了二元混合流动相中甲醇 乙酸缓冲液的比例对燃料主体和BHT分离效果的影响 ,选择了最佳分离条件 (甲醇所占体积分数为 85 % ,流速为 1mL/min) ,在此条件下 ,可测出质量分数为 1× 10 -5的BHT。用该喷气燃料配制了BHT质量分数在 2 0× 10 -6到 12 0× 10 -6之间的标准溶液 ,考察了BHT质量分数与峰面积之间的关系 ,结果表明线性关系良好。     

塑胶食品与药品包装材料中BHT的测定

采用索氏抽提法对食品与药品用塑料、橡胶包装材料样品进行前处理,正己烷提取其中的抗氧化剂2,6-二叔丁基-4-甲基苯酚(BHT).用毛细管柱气相色谱法、氢火焰离子化检测器、外标法测定样品中BHT的含量,用GC-MS对BHT定性分析.方法的检出限为0.1 mg/kg,回收率为90.0%～96.6%,测定结果的相对标准偏差为0.72%(n=5).     

纸基包装材料中抗氧化剂及增塑剂向干性食品模拟物Tenax TA迁移的研究

采用改性聚苯醚多孔聚合物微球Tenax TA为干性食品模拟物,用于纤维素纸基食品接触材料中3-叔丁基-4-羟基苯甲醚(BHA)、2,6-二叔丁基-4-甲基苯酚(BHT)和邻苯二甲酸二环己酯(DCP)向Tenax TA迁移的研究,以超高效液相色谱进行测定。迁移试验以白卡纸和牛皮纸为研究对象,通过设计不同迁移时间和迁移温度下3种目标物向Tenax TA迁移的实验,获取有机化合物从纸基纤维素向Tenax TA迁移的规律。结果表明,有机化合物从纸基材料向多孔聚合物微球的迁移经历了气体吸附和脱附两个步骤。在Tenax TA吸附目标化合物的过程中,纤维素纸基材料的微观孔径尺寸越大,与迁移物的相互作用越小,迁移物迁移的速率越大,Tenax TA的吸附效率越高;当吸附达到平衡后,迁移时间的延长会引发Tenax TA中迁移物的脱附,进而导致目标化合物的迁移率下降。对45种纸基食品接触材料中目标迁移物的筛查表明,BHA和DCP分别存在于两种不同类型的纸基食品接触材料中,迁移量分别为0.027μg/dm~2和0.81μg/dm~2,均小于欧盟指令规定的特定迁移限量。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.