Self‐Assembly of Imidazolium‐Based Surfactants in Magnetic Room‐Temperature Ionic Liquids: Binary Mixtures

The phase behaviour of binary mixtures of ionic surfactants (1‐alkyl‐3‐imidazolium chloride, C_nmimCl with n=14, 16 and 18) and imidazolium‐based ionic liquids (1‐alkyl‐3‐methylimidazolium tetrachloroferrate, C_nmimFeCl₄, with n=2 and 4) over a broad temperature range and the complete range of compositions is described. By using many complementary methods including differential scanning calorimetry (DSC), polarised microscopy, small‐angle neutron and X‐ray scattering (SANS/SAXS), and surface tension, the ability of this model system to support self‐assembly is described quantitatively and this behaviour is compared with common water systems. The existence of micelles swollen by the solvent can be deduced from SANS experiments and represent a possible model for aggregates, which has barely been considered for ionic‐liquid systems until now, and can be ascribed to the rather low solvophobicity of the surfactants. Our investigation shows that, in general, C_nmimCl is a rather weak amphiphile in these ionic liquids. The amphiphilic strength increases systematically with the length of the alkyl chain, as seen from the phase behaviour, the critical micelle concentration, and also the level of definition of the aggregates formed.     

Synthesis of Low‐Viscosity Ionic Liquids for Application in Dye‐Sensitized Solar Cells

Two types of ionic liquids (ILs), 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 1‐(3‐butenyl)‐3‐methyl imidazolium iodide, are synthesized by introducing an unsaturated bond into the side alkyl chain of the imidazolium cation. These new ionic liquids exhibit high thermal stability and low viscosity (104 cP and 80 cP, respectively). The molecular dynamics simulation shows that the double bond introduced in the alkane chain greatly changes the molecular system space arrangement and diminishes the packing efficiency, leading to low viscosity. The low viscosity of the synthesized ionic liquids would enhance the diffusion of redox couples. This enhancement is detected by fabricating dye‐sensitized solar cells (DSSCs) with electrolytes containing the two ILs and I₂. The highest efficiency of DSSCs is 6.85 % for 1‐(3‐hexenyl)‐3‐methyl imidazolium iodide and 5.93 % for 1‐(3‐butenyl)‐3‐methyl imidazolium iodide electrolyte, which is much higher than that of 5.17 % with the counterpart 1‐hexyl‐3‐methyl imidazolium iodide electrolyte.     

Effects of Cationic Structure on Cellulose Dissolution in Ionic Liquids: A Molecular Dynamics Study

In recent years, great progress has been made in the dissolution of cellulose with ionic liquids (ILs). However, the mechanism of cellulose dissolution, especially the role the IL cation played in the dissolution process, has not been clearly understood. Herein, the mixtures of cellulose with a series of imidazolium‐based chloride ionic liquids and 1‐butyl‐3‐methyl pyridinium chloride ([C₄mpy]Cl) were simulated to study the effect that varying the heterocyclic structure and alkyl chain length of the IL cation has on the dissolution of cellulose. It was shown that the dissolution of cellulose in [C₄mpy]Cl is better than that in [C₄mim]Cl. For imidazolium‐based ILs, the shorter the alkyl chain is, the higher the solubility will be. In addition, an all‐atom force field for 1‐allyl‐3‐methyl imidazolium cation ([Amim]⁺) was developed, for the first time, to investigate the effect the electron‐withdrawing group within the alkyl chain of the IL cation has on the dissolution of cellulose. It was found that the interaction energy between [Amim]⁺ and cellulose was greater than that between [C₃mim]⁺ and cellulose, indicating that the presence of electron‐withdrawing group in alkyl chain of the cation enhanced the interaction between the cation and cellulose due to the increase of electronegativity of the cations. These findings are used to assess the cationic effect on the dissolution of cellulose in ILs. They are also expected to be important for rational design of novel ILs for efficient dissolution of cellulose.     

Molecularly imprinted SPE coupled with HPLC for the selective separation and enrichment of alkyl imidazolium ionic liquids in environmental water samples

A novel 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted solid‐phase sorbent was synthesized. The as‐prepared material was characterized by SEM, Brunauer–Emmett–Teller surface area analysis and Fourier Transform IR measurements. Then its adsorption properties for alkyl imidazolium ionic liquids, including adsorption capacities, adsorption kinetics, and properties of selective separation and enrichment were studied in detail. It was shown that the ionic liquid surface imprinted polymer exhibited high selective recognition characteristics for the imidazolium chloride ionic liquids with short alkyl chains (C_nmimCl, n = 2, 4, 6, 8) and the adsorption equilibrium was achieved within 25 min. Various parameters were optimized for the 1‐butyl‐3‐methylimidazolium chloride ionic liquid surface imprinted polymer SPE column, such as flow rate, eluent solvent, selectivity, and reusability of the column. Then, the SPE column coupled with HPLC was used for the determination of alkyl imidazolium ionic liquids. Experimental results showed that the existence of their structural analogs and common concomitants in environmental matrices did not affect the enrichment of 1‐butyl‐3‐methyl imidazolium chloride ionic liquid. The average recoveries of 1‐butyl‐3‐methylimidazolium chloride ionic liquid in spiked water samples were in the range of 92.0–102.0% with the RSD lower than 5.8%.     

Expanding the Electrochemical Window: New Tunable Aryl Alkyl Ionic Liquids (TAAILs) with Dicyanamide Anions

A set of new tunable aryl alkyl ionic liquids (TAAILs) based on the 1-aryl-3-alkyl imidazolium motif has been synthesized, in which the following variables were systematically changed: alkyl chain length, aryl substitution (group and position), and counter ion. TAAILs with dicyanamide (DCA) and bis(trifluoromethylsulfonyl)imide (N(SO₂CF₃)₂, NTf₂) anions showed remarkable differences of their physical properties: NTf₂ ionic liquids were found to have high decomposition temperatures and viscosities well below those of the DCA TAAILs. In contrast, the dicyanamide anion increased the electrochemical stability leading to TAAILs with an extremely wide electrochemical window of up to 7.17 V. Additionally, both classes of TAAILs extract transition metals from aqueous solutions: TAAILs with the DCA anion extract both platinum and copper while TAAILs with the NTf₂ anion are selective towards platinum. This demonstrates that minor changes of the molecular structure lead to TAAILs with drastically changed physicochemical properties.     

Electronic Effects of para‐Substitution on the Melting Points of TAAILs

Owing to numerous new applications, the interest in “task‐specific” ionic liquids increased significantly over the last decade. But, unfortunately, the imidazolium‐based ionic liquids (by far the most frequently used cations) have serious limitations when it comes to modifications of their properties. The new generation of ionic liquids, called tunable aryl–alkyl ionic liquids (TAAILs), replaces one of the two alkyl chains on the imidazolium ring with an aryl ring which allows a large degree of functionalization. Inductive, mesomeric, and steric effects as well as potentially also π π and π π⁺ interactions provide a wide range of possibilities to tune this new class of ILs. We investigated the influence of electron‐withdrawing and ‐donating substituents at the para‐position of the aryl ring (NO₂, Cl, Br, EtO(CO), H, Me, OEt, OMe) by studying the changes in the melting points of the corresponding bromide and bis(trifluoromethanesulfonyl)imide, (N(Tf)₂⁻), salts. In addition, we calculated (B3LYP/6‐311++G(d,p)) the different charge distributions of substituted 1‐aryl‐3‐propyl‐imidazolium cations to understand the experimentally observed effects. The results indicated that the presence of electron‐donating and ‐withdrawing groups leads to strong polarization effects in the cations.     

Liquid chromatography and characterization of ether-functionalized imidazolium ionic liquids on mixed-mode reversed-phase/cation exchange stationary phase

A new series [C_nO_mmim]Cl of imidazolium cation-based ionic liquids (ILs), with an ether functional group on the alkyl side-chain, has been prepared. The possibility of analyzing the ionic liquids by high performance liquid chromatography (HPLC) was investigated on mixed-mode reversed/cation exchange stationary phase with the aqueous-acetonitrile mobile phase. Elution parameters, such as retention factor, selectivity and column efficiency, were studied as functions of mobile phase composition and pH. The ILs were characterized by elemental analysis, and infrared, UV and ¹H, ¹³C NMR spectroscopy.     

Solubility of CO2 in imidazolium-based tetrafluoroborate ionic liquids

The solubility of CO₂ in imidazolium ionic liquids (ILs), 1-butyl-3-methyl imidazolium tetrafluoroborate ([bmim][BF₄]), 1-hexyl-3-methyl imidazolium tetrafluoroborate ([hmim][BF₄]) and 1-octyl-3-methyl imidazolium tetrtafluoroborate ([omim][BF₄]) was determined at 305-25 K and pressures from 1 to 9 MPa. The influence of chain length of alkyl substituents on the imidazolium cation on the solubility of CO₂ was investigated. The differences in solubility with chain length are in the sequence [omim][BF₄] > [hmim][BF₄] > [bmim][BF₄]. The solubility data were correlated by the extended Henry's law, and enthalpy, Gibbs free energy and entropy changes were obtained.     

Sodium carbonate as phase promoter in aqueous solutions of imidazolium and pyridinium ionic liquids

Several methylsulfate and chloride anion-based ionic liquids, such as 1-alkyl-3-methyl imidazolium methyl sulfate, C_nMIM CH₃SO₄ (n = 1, 2, and 4), 1-benzyl-3-methyl imidazolium methyl sulfate, BzMIM CH₃SO₄, 1-benzyl, or hexyl-3-methyl imidazolium chloride, XMIM Cl (X = Bz and Hx), and methylpyridinium methylsulfate, Mpy CH₃SO₄, with sodium carbonate, Na₂CO₃, as phase forming salt, have been investigated and discussed for their potential use in separations based on aqueous two-phase systems (ATPS). Phase diagrams have been experimentally ascertained at T = 298.15 K, and Merchuck equation and a variation of this model have been used for correlating the binodal data. The alkyl chain length in the cation and the type of anion and cation have been explored and discussed due to their decisive influence in the ATPS behavior. The consistence of tie-line data was ascertained by applying the Othmer–Tobias and Bancroft equations.     

Study of the Alkyl Chain Length on Laccase Stability and Enzymatic Kinetic with Imidazolium Ionic Liquids

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C₄mim][Cl], 1-octyl-3-methyl imidazolium chloride [C₈mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C₁₀mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0. The laccase stability was well maintained in [C₄mim][Cl] IL when compared to the control. The inactivation of laccase increases with the length of the alkyl chain in the IL: [C₁₀mim][Cl] > [C₈mim][Cl] > [C₄mim][Cl]. The kinetic studies in the presence of ABTS as substrate allowed calculating the Michaelis–Menten parameters. Among the ILs, [C₄mim][Cl] was the suitable choice attending to laccase activity and stability. Alkyl chains in the ions of ILs have a deactivating effect on laccase, which increases strongly with the length of the alkyl chain.     

Effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases

Lyotropic quaternary mixtures of potassium alkanoates (KCx) and sodium alkyl sulphates (NaCxS), where x is the number of carbon atoms in their alkyl chains, were prepared to investigate the effect of the surfactant alkyl chain length on the stabilisation of lyotropic nematic phases. The lyotropic mixtures investigated were formed by the dissolution of KCx (NaCxS) surfactants in the mixture of Rb₂SO₄/1-decanol/water (Na₂SO₄/1-decanol/water), separately. The uniaxial-to-biaxial nematic phase transitions were identified from the temperature dependence of the birefringences of the nematic phases by means of laser conoscopy. The micelle dimensions were obtained from small-angle X-ray scattering measurements. It was observed that the increase in the surfactant alkyl chain length causes the micellar growth in the plane perpendicular to the main amphiphile bilayer. The surfactant alkyl chain length plays a key role on the shape anisotropy of micelles, which triggers the orientational fluctuations that are responsible for the stabilisation of the different lyotropic nematic phases.     

Ionic Liquids: Dissecting the Enthalpies of Vaporization

We calculate the heats of vaporisation for imidazolium‐based ionic liquids [C_nmim][NTf₂] with n=1, 2, 4, 6, 8 by means of molecular dynamics (MD) simulations and discuss their behavior with respect to temperature and the alkyl chain length. We use a force field developed recently. The different cohesive energies contributing to the overall heats of vaporisations are discussed in detail. With increasing alkyl chain length, the Coulomb contribution to the heat of vaporisation remains constant at around 80 kJ mol^?1, whereas the van der Waals interaction increases continuously. The calculated increase of about 4.7 kJ mol^?1 per CH₂‐group of the van der Waals contribution in the ionic liquid exactly coincides with the increase in the heats of vaporisation for n‐alcohols and n‐alkanes, respectively. The results support the importance of van der Waals interactions even in systems completely composed of ions.     

Interfacial tension between water and high pressure CO2 in the presence of hydrocarbon surfactants

Interfacial tension of water–CO₂ interface was measured by pendant drop method in the presence of a surfactant of various concentrations. The surfactants used were three surfynols which are non-ionic blanched hydrocarbon with different length of the alkyl side chain. Prior to the interfacial tension measurements, the solubility of the surfynols in CO₂ were determined from cloud point method. The measured interfacial tensions indicated that an addition of small amount surfactant did reduce the interfacial tension. The interfacial activities of surfactants were evaluated from the slope of the interfacial tension reduction curve against the surfactant concentration and rationalized in terms of the molecular natures such as hydrophobic alkyl chain length.     

Modification of kaolinite with alkylimidazolium salts

We have demonstrated that the d-spacing and thermal stability of the alkylimidazolium intercalated kaolinite compounds can be controlled by adjusting chain length of the alkyl groups. The composites were synthesized by displacement method using selected imidazolium ionic liquids bearing different short alkyl chains as guest molecules. The effects of the length of alkyl side chain on d-spacing and thermal stability of the ionic liquids–kaolinite intercalations were investigated by XRD and TG-DSC. Results revealed that in these composites, increasing the length of alkyl substituent led to larger d-spacing and decreased thermal stability. Temperature was found to have influence on the intercalation ratio but not on the d-spacing of final product. The present study shows an easy way of tailoring the performance of these intercalations via small variation of guest ionic liquids, providing the possibility of finding “species-specific” modifier for fully exfoliated nanocomposites.     

Recombination of Lophyl Radicals in Pyrrolidinium‐Based Ionic Liquids

The recombination of photolytically generated lophyl radicals has been investigated by UV/Vis spectroscopy in 1‐alkyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)imides (NTf₂) in comparison with 1‐butyl‐3‐methylimidazolium NTf₂, dimethyl sulfoxide, and triacetin. The 1‐alkyl‐1‐methylpyrrolidinium‐based ionic liquids contain an alkyl substituent varying between butyl and decyl groups. Optically pure ionic liquids are used in these studies. Temperature‐dependent investigation of lophyl radical recombination shows an increase in the radical recombination rate with increasing temperature in each solvent, which is caused by decreasing viscosity with increasing temperature. Furthermore, the viscosity of the 1‐alkyl‐1‐methylpyrrolidinium NTf₂ increases nearly linearly within the row of these ionic liquids. In contrast, the recombination of the photolytically generated lophyl radicals is significantly faster in the ionic liquids than in the traditional organic solvents under investigation. Moreover, the recombination rate increases with the length of the alkyl chain bound at the cation of the ionic liquid at a given temperature. This may be caused by an increase in the extent of lophyl radical recombination within the solvent cage. Solvent cage effects dominate in the case of lophyl radical recombination in ionic liquids bearing a long alkyl chain or if the temperature is near the melting temperature of the ionic liquid. The positive value of the activation entropy supports this hypothesis. The results obtained are important for discussion of bimolecular radical reactions in ionic liquids.     

Interactions of two homologues of cationic surface active ionic liquids with sodium carboxymethylcellulose in aqueous solution

In the preceding paper of this series, we studied the interactions of copolymers with the ionic liquids, 1-alkyl-3-methylimidazolium bromide (C _n mimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C _n MPB, n?=?12, 14, 16). An obvious difference was detected between the interaction mechanism and the alkyl chain length of the surfactant. In the present study, we performed a systematic study on the interaction of sodium carboxymethylcellulose (NaCMC) with ionic liquids in aqueous solution by isothermal titration microcalorimetry (ITC), conductivity, turbidity, and dynamic light scattering (DLS) measurements. The existence of electrostatic attraction between NaCMC and ILs could increase the complexity of these systems. The results show that the monomers of C₈mimBr can bind to the NaCMC chains and form free surfactant micelles in the solution, while no micelle-like C₈mimBr/NaCMC cluster is detected. For other surfactants, the formation of surfactant/NaCMC clusters in the solution is driven by electrostatic and hydrophobic interactions, which could be divided into two types. One type is the polymer-induced surfactant/NaCMC complexes that form in the solution for the surfactant of C _n mimBr (n?=?10, 12, 14) or C _n MPB (n?=?12, 14). The other type is that the surfactant-induced surfactant/NaCMC complexes come into being for the surfactant of C₁₆mimBr or C₁₆MPB. Finally, the different modes of complex formation proposed have a good interpretation of the experiment results, unraveling the details of the effect of surfactant alkyl chain length and headgroup on the surfactant–NaCMC interactions.     

Crystallographic view of fluidic structures for room‐temperature ionic liquids: 1‐butyl‐3‐methyl­imidazolium hexa­fluoro­phosphate

Shock‐induced crystallization of the supercooled ionic liquid 1‐butyl‐3‐methyl­imidazolium hexa­fluoro­phosphate, C₈H₁₅N₂⁺·PF₆⁻, allows for the first time precise X‐ray diffraction analysis directly pertinent to the fluid state. This inter­mediate‐chain‐length structure shows features of both short‐ and long‐chain analogs. Two types of inter­planar distances between imidazolium rings are observed. The anions are located in channels formed by the imidazolium rings and alkyl chains.     

Cation-anion-water interactions in aqueous mixtures of imidazolium based ionic liquids

We have examined the cation-anion-water interactions in aqueous mixtures of imidazolium ionic liquids (ILs) over the whole composition range using FTIR spectroscopy. Changes in the peak positions or band areas of OH vibrational modes of water and CH vibrational modes of imidazolium cation as a function of IL concentration indicated a diminishing trend in hydrogen-bonding network of water and qualitative changes in solution structures. ¹H NMR chemical shifts of C(2)H, HC(4)C(5)H and alkyl chain protons of imidazolium cation provided useful information about the comparative strength of cation-anion-water interactions.     

Thermal degradation studies of alkyl-imidazolium salts and their application in nanocomposites

Increasing the thermal stability of organically-modified layered silicates is one of the key points in the successful technical application of polymer-layered silicate nanocomposites on the industrial scale. To circumvent the detrimental effect of the lower thermal stability of alkyl ammonium-treated montmorillonite, a series of alkyl-imidazolium molten salts were prepared and characterized by elemental analysis, thermogravimetry (TGA) and thermal desorption mass spectroscopy (TDMS). The effect of counter ion, alkyl chain length and structural isomerism on the thermal stability of the imidazolium salts was investigated. Alkyl-imidazolium-treated montmorillonite clays were prepared by ion exchange of the imidazolium salts with Na-montmorillonite. These organically-modified clays were characterized by X-ray diffraction (XRD), TDMS and thermogravimetry coupled with Fourier transform infrared spectroscopy (TGA-FTIR), and compared to the conventional quaternary alkyl ammonium montmorillonite. Results indicate that the counter ion has an effect on the thermal stability of the imidazolium salts, and that imidazolium salts with PF₆⁻, N(SO₂CF₃)₂⁻ and BF₄⁻ anions are thermally more stable than the halide salts. A relationship was observed between the chain length of the alkyl group and the thermo-oxidative stability; as the chain length increased from propyl, butyl, decyl, hexadecyl, octadecyl to eicosyl, the stability decreased. The results also show that the imidazolium-treated montmorillonite has greater thermal stability compared to the imidazolium halide. Analysis of the decomposition products by FTIR provides an insight about the decomposition products which are water, carbon dioxide and hydrocarbons.